Prepare the internal data for passing FDs instead of having qemu open
the file internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
When starting up a VM with FD-passed images we need to look up the
corresponding named FD set and associate it with the virStorageSource
based on the name.
The association is brought into virStorageSource as security labelling
code will need to access the FD to perform selinux labelling.
Similarly when startup is complete in certain cases we no longer need to
keep the copy of FDs and thus can close them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The helper will be used in various places that need to check that a disk
source struct is using FD passing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The new helper qemuDomainStartupCleanup is used to perform cleanup after
a startup of a VM (successful or not). The initial implementation just
calls qemuDomainSecretDestroy, which can be un-exported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The 'fdgroup' will allow users to specify a passed FD (via the
'virDomainFDAssociate()' API) to be used instead of opening a path.
This is useful in cases when e.g. the file is not accessible from inside
a container.
Since this uses the same disk type as when we open files via names this
patch also introduces a hypervisor feature which the hypervisor asserts
that code paths are ready for this possibility.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Introduce a new argument type for testQemuInfoSetArgs named ARG_FD_GROUP
which allows users to instantiate tests with populated FD passing hash
table.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Implement passing and storage of FDs for the qemu driver. The FD tuples
are g_object instances stored in a per-domain hash table and are
automatically removed once the connection is closed.
In the future we can consider supporting also to not tie the lifetime of
the passed FDs bound to the connection.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
For FD-passing of disk sources we'll need to keep the FDs around.
Introduce a data type helper based on a g_object so that we get
reference counting.
One instance will (due to security labelling) will need to be part of
the virStorageSource struct thus it's declared in the storage_source_conf
module.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The API can be used to associate one or more (e.g. a RO and RW fd for a
disk backend image) FDs to a VM. They can be then used per definition.
The primary use case for now is for complex deployment where
libvirtd/virtqemud may be run inside a container and getting the image
into the container is complicated.
In the future it will also allow passing e.g. vhost FDs and other
resources to a VM without the need to have a filesystem representation
for it.
Passing raw FDs has few intricacies and thus libvirt will by default not
restore security labels.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The patch moving the code didn't faithfully represent the typecasting
of the 'bandwidth' variable needed to properly convert from the legacy
'unsigned long' argument which resulted in a build failure on 32 bit
systems:
../src/qemu/qemu_block.c: In function ‘qemuBlockCommit’:
../src/qemu/qemu_block.c:3249:23: error: comparison is always false due to limited range of data type [-Werror=type-limits]
3249 | if (bandwidth > LLONG_MAX >> 20) {
| ^
Fix it by returning the check into qemuDomainBlockCommit as it's needed
only because of the legacy argument type in the old API and use
'unsigned long long' for qemuBlockCommit.
Fixes: f5a77198bf
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Some compilers aren't happy when an automatically freed variable is used
just to free something (thus it's only assigned in the code):
When compiling qemuSnapshotDelete after recent commits they complain:
../src/qemu/qemu_snapshot.c:3153:61: error: variable 'delData' set but not used [-Werror,-Wunused-but-set-variable]
g_autoslist(qemuSnapshotDeleteExternalData) delData = NULL;
^
To work around the issue we can restructure the code which also has the
following semantic implications:
- since qemuSnapshotDeleteExternalPrepare does validation we error out
sooner than attempting to start the VM
- we read the temporary variable at least in one code path
Fixes: 4a4d89a925
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use a temporary variable to avoid memory alignment issues on ARM:
../src/nwfilter/nwfilter_dhcpsnoop.c: In function ‘virNWFilterSnoopLeaseFileLoad’:
../src/nwfilter/nwfilter_dhcpsnoop.c:1745:20: error: cast increases required alignment of target type [-Werror=cast-align]
1745 | (unsigned long long *) &ipl.timeout,
|
Fixes: 0d278aa089
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now that deletion of external snapshot is implemented document the
current virDomainSnapshotDelete supported state.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If the daemon crashes or is restarted while the snapshot delete is in
progress we have to handle it gracefully to not leave any block jobs
active.
For now we will simply abort the snapshot delete operation so user can
start it again. We need to refuse deleting external snapshots if there
is already another active job as we would have to figure out which jobs
we can abort.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When daemon is restarted and libvirt tries to recover domain jobs we
need to know if the snapshot job was a snapshot delete in order to
safely abort running QEMU block jobs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When deleting external snapshots the operation may fail at any point
which could lead to situation that some disks finished the block commit
operation but for some disks it failed and the libvirt job ends.
In order to make sure that the qcow2 images are in consistent state
introduce new element "<snapshotDeleteInProgress/>" that will mark the
disk in snapshot metadata as invalid until the snapshot delete is
completed successfully.
This will prevent deleting snapshot with the invalid disk and in future
reverting to snapshot with the invalid disk.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
With external snapshots we need to modify the metadata bit more then
what is required for internal snapshots. Mainly the storage source
location changes with every external snapshot.
This means that if we delete non-leaf snapshot we need to update all
children snapshots and modify the disk sources for all affected disks.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When deleting snapshot we are starting block-commit job over all disks
that are part of the snapshot.
This operation may fail as it writes data changes to the backing qcow2
image so we need to wait for all the disks to finish the operation and
wait for correct signal from QEMU. If deleting active snapshot we will
get `ready` signal and for inactive snapshots we need to disable
autofinalize in order to get `pending` signal.
At this point if commit for any disk fails for some reason and we abort
the VM is still in consistent state and user can fix the reason why the
deletion failed.
After that we do `pivot` or `finalize` if it's active snapshot or not to
finish the block job. It still may fail but there is nothing else we can
do about it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In order to save some CPU cycles we will collect all the necessary data
to delete external snapshot before we even start. They will be later
used by code that deletes the snapshots and updates metadata when
needed.
With external snapshots we need data that libvirt gets from running QEMU
process so if the VM is not running we need to start paused QEMU process
for the snapshot deletion and kill at afterwards.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Deleting external snapshots will require to run it as async domain job,
the same way as we do for snapshot creation.
For internal snapshots modify the job mask in order to forbid any other
job to be started.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Deleting internal snapshot when the currently active disk image is
different than where the internal snapshot was taken doesn't work
correctly.
This applies to a running VM only as we are using QMP command and
talking to the QEMU process that is using different disk.
This works correctly when the VM is shut of as in this case we spawn
qemu-img process to delete the snapshot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Prepare the validation function for external snapshot delete support.
There is one exception when deleting `children-only` snapshots. If the
snapshot tree is like this example:
snap1 (external)
|
+- snap2 (internal)
|
+- snap3 (internal)
|
+- snap4 (internal)
and user calls `snapshot-delete snap1 --children-only` the current
snapshot is external but all the children snapshots are internal only
and we are able to delete it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract the code deleting external snapshot metadata to separate
function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Previously the reparent happened before the actual snapshot deletion.
This change moves the code closer to the rest of the code handling
snapshot metadata when deletion happens. This makes the metadate
deletion happen after the data files are deleted.
Following patch will extract it into separate function
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This simplifies the code a bit by reusing existing parts that deletes
a single snapshot.
The drawback of this change is that we will now call the re-parent bits
to keep the metadata in sync for every child even though it will get
deleted as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract code that deletes children of specific snapshot to separate
function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Extract code that deletes single snapshot to separate function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Move code around to make it clear what is called when deleting single
snapshot or children snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Looks up disk storage source within storage source chain using storage
source object instead of path to make it work with all disk types.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
QEMU emits this signal when the job finished its work and is about to be
finalized. If the job is started with autofinalize disabled the job
waits for user input to finalize the job.
This will be used by snapshot delete code.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The created job will be needed by external snapshot delete code so
rework qemuBlockCommit to return that pointer.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
External snapshots will use this to synchronize qemu block jobs.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Deleting external snapshots will require configuring autofinalize to
synchronize the block jobs for disks withing single snapshot in order to
be able safely abort of one of the jobs fails.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Upcoming snapshot deletion code will require that multiple commit jobs
are finished in sync. To allow aborting then if one fails we will need
to use manual finalization of the jobs.
This commit implements the monitor code for `job-finalize`.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow to use it while having async domain job active which we
will use when deleting external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow to use it while having async domain job active which we
will use when deleting external snapshots. At the same time we will need
to have the block job started as synchronous.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Move the code for finishing a job in the ready state to qemu_block.c.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Up until commit 629282d884, using mode=restrictive caused
virNumaSetupMemoryPolicy() to be called from qemuProcessHook(),
and that in turn resulted in virNumaNodesetIsAvailable() being
called and the nodeset being validated.
After that change, the only validation for the nodeset is the one
happening in qemuBuildMemoryBackendProps(), which is skipped when
using mode=restrictive.
Make sure virNumaNodesetIsAvailable() is called whenever a
nodeset has been provided by the user, regardless of the mode.
https://bugzilla.redhat.com/show_bug.cgi?id=2156289
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The one for mode=strict fails, as expected, while the one for
mode=restrictive currently doesn't even though it should. The
next commit will address the issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
