Pkg-config file libxml-2.0.pc was introduced in libxml2-2.2.4 and we
require at least 2.6.0 so the crazy xml2-config check can be dropped.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
This allows to use two or more LIBVIRT_CHECK_(LIB|LIB_ALT|PKG) macros
for one library. For example, when we check for existence of
pgk-config file of some library and we know that not all versions of
that library that libvirt requires provides this file, we can fallback
to use library check.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Usage of AC_REQUIRE will mess with order how LIBVIRT_CHECK_* macros
are composed into configure.ac. This ensures that the output of
configure --help is properly ordered and grouped into sections.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Following patch will update LIBVIRT_CHECK_(LIB|LIB_ALT|PKG) macros in
a way that you will be able to call a another macro as a fallback if
the first one fails. To allow that, we need to move the
LIBVIRT_ARG_WITH out of those macro to not have two or more same lines
in output of "configure --help".
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All checks that prints result at the end of configure uses
LIBVIRT_RESULT_${CHECK_NAME}. Create those macros for remaining check.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit 373973206a moved wireshark dissector code to its own file but
forgot to properly update configure.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add a new qualifier '--physical' to the 'vol-info' command in order to
dispaly the physical size of the volume. The size can differ from the
allocation value depending on the volume file time. In particular, qcow2
volumes will have a physical value larger than allocation. This also occurs
for sparse files, although for those the capacity is the largest size;
whereas, for qcow2 capacity is the logical size.
Signed-off-by: John Ferlan <jferlan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1332019
This function will essentially be a wrapper to virStorageVolInfo in order
to provide a mechanism to have the "physical" size of the volume returned
instead of the "allocation" size. This will provide similar capabilities to
the virDomainBlockInfo which can return both allocation and physical of a
domain storage volume.
NB: Since we're reusing the _virStorageVolInfo and not creating a new
_virStorageVolInfoFlags structure, we'll need to generate the rpc APIs
remoteStorageVolGetInfoFlags and remoteDispatchStorageVolGetInfoFlags
(although both were originally created from gendispatch.pl and then
just copied into daemon/remote.c and src/remote/remote_driver.c).
The new API will allow the usage of a VIR_STORAGE_VOL_GET_PHYSICAL flag
and will make the decision to return the physical or allocation value
into the allocation field.
In order to get that physical value, virStorageBackendUpdateVolTargetInfoFD
adds logic to fill in physical value matching logic in qemuStorageLimitsRefresh
used by virDomainBlockInfo when the domain is inactive.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Although the virStorageBackendUpdateVolTargetInfo will update the
target.physical value, there is no way to provide that information
via the virStorageGetVolInfo API since it only returns the capacity
and allocation of a volume. So as described in commit id '0282ca45',
it should be possible to generate an output only <physical> value
for that purpose.
This patch generates the <physical> value in the volume XML output
for the sole purpose of being able to view/see the value to allow
someone to parse the XML in order to obtain the value.
Update the documentation to describe the output only nature.
Signed-off-by: John Ferlan <jferlan@redhat.com>
According to commit id '0282ca45a' the 'physical' value should
essentially be the last offset of the image or the host physical
size in bytes of the image container. However, commit id '15fa84ac'
refactored the GetBlockInfo to use the same returned data as the
GetStatsBlock API for an active domain. For the 'entry->physical'
that would end up being the "actual-size" as set through the
qemuMonitorJSONBlockStatsUpdateCapacityOne (commit '7b11f5e5').
Digging deeper into QEMU code one finds that actual_size is
filled in using the same algorithm as GetBlockInfo has used for
setting the 'allocation' field when the domain is inactive.
The difference in values is seen primarily in sparse raw files
and other container type files (such as qcow2), which will return
a smaller value via the stat API for 'st_blocks'. Additionally
for container files, the 'capacity' field (populated via the
QEMU "virtual-size" value) may be slightly different (smaller)
in order to accomodate the overhead for the container. For
sparse files, the state 'st_size' field is returned.
This patch thus alters the allocation and physical values for
sparse backed storage files to be more appropriate to the API
contract. The result for GetBlockInfo is the following:
capacity: logical size in bytes of the image (how much storage
the guest will see)
allocation: host storage in bytes occupied by the image (such
as highest allocated extent if there are no holes,
similar to 'du')
physical: host physical size in bytes of the image container
(last offset, similar to 'ls')
NB: The GetStatsBlock API allows a different contract for the
values:
"block.<num>.allocation" - offset of the highest written sector
as unsigned long long.
"block.<num>.capacity" - logical size in bytes of the block device
backing image as unsigned long long.
"block.<num>.physical" - physical size in bytes of the container
of the backing image as unsigned long long.
For instance:
hellolibvirt/hellolibvirt.c: In function 'showDomains':
hellolibvirt/hellolibvirt.c💯19: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
for (i = 0; i < numNames; i++) {
^
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add tests for controller based disks to check disk address compatibility
with disk bus types.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
This patch detects a misconfiguration between the disk bus type and disk
address type for controller based disk buses (SATA, SCSI, FDC and
IDE). The addresses of these bus types are all managed in common code so
it's possible to decide in common code whether the disk address and bus
type are compatible or not.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Disk->info is not live updatable so add a check for this. Otherwise
libvirt reports success even though no data was updated.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
This function will be needed by the QEMU driver in an upcoming
patch. Additionally, removed a useless empty line.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
This patch reduces the complexity of the filtering algorithm in
virCgroupDetect by first correcting the controller mask and then
checking for potential co-mounts without any correlating
controller mask modifications.
If you agree that this patch removes complexity and improves
readability it could simply be squashed into the first patch
of this series.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
The cgroup controller filtering in virCgroupDetect does not work
properly if the following conditions are met:
1) the host system does not have a cgroup controller which
libvirt requests (unavailable controller) and
2) libvirt is configured to disable a controller (disabled controller) and
3) the disabled controller is located before the unavailable controller
in virCgroupController.
As an example: The memory controller is unavailable and the cpuset
controller is configured to be disabled.
In this scenario trying to start a domain results in the error
error: Controller 'cpuset' is not wanted, but 'memory' is co-mounted: Invalid argument
This error occurs when virCgroupDetect is called with a valid parent group.
The resulting group created by virCgroupCopyMounts holds for cpuset and
memory controller empty mount points. The filtering of disabled controllers
checks for co-mounts by comparing the mount points. The cpuset controller
causes the filtering to occur before the memory controller is marked as to be
ignored by modifying the controller mask since it is unavailable.
Therefore the co-mount detection logic compares the cpuset and memory controller
mount points and since both are empty the memory controller is regarded
erroneously as being co-mounted.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
