When setting up a new guest or when a management software wants
to allow access to an existing guest the
virDomainSetUserPassword() API can be used, but that might be not
good enough if user want to ssh into the guest. Not only sshd has
to be configured to accept password authentication (which is
usually not the case for root), user have to type in their
password. Using SSH keys is more convenient. Therefore, two new
APIs are introduced:
virDomainAuthorizedSSHKeysGet() which lists authorized keys for
given user, and
virDomainAuthorizedSSHKeysSet() which modifies the authorized
keys file for given user (append, set or remove keys from the
file).
It's worth nothing that while authorized_keys file entries have
some structure (as defined by sshd(8)), expressing that structure
goes beyond libvirt's focus and thus "keys" are nothing but an
opaque string to libvirt.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce a few new public APIs related to incremental backups. This
builds on the previous notion of a checkpoint (without an existing
checkpoint, the new API is a full backup, differing from
virDomainBlockCopy in the point of time chosen and in operation on
multiple disks at once); and also allows creation of a new checkpoint
at the same time as starting the backup (after all, an incremental
backup is only useful if it covers the state since the previous
backup).
A backup job also affects filtering a listing of domains, as well as
adding event reporting for signaling when a push model backup
completes (where the hypervisor creates the backup); note that the
pull model does not have an event (starting the backup lets a third
party access the data, and only the third party knows when it is
finished).
The full list of new APIs:
virDomainBackupBegin;
virDomainBackupGetXMLDesc;
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some layered products such as oVirt have requested a way to avoid being
blocked by guest agent commands when querying a loaded vm. For example,
many guest agent commands are polled periodically to monitor changes,
and rather than blocking the calling process, they'd prefer to simply
time out when an agent query is taking too long.
This patch adds a way for the user to specify a custom agent timeout
that is applied to all agent commands.
One special case to note here is the 'guest-sync' command. 'guest-sync'
is issued internally prior to calling any other command. (For example,
when libvirt wants to call 'guest-get-fsinfo', we first call
'guest-sync' and then call 'guest-get-fsinfo').
Previously, the 'guest-sync' command used a 5-second timeout
(VIR_DOMAIN_QEMU_AGENT_COMMAND_DEFAULT), whereas the actual command that
followed always blocked indefinitely
(VIR_DOMAIN_QEMU_AGENT_COMMAND_BLOCK). As part of this patch, if a
custom timeout is specified that is shorter than
5 seconds, this new timeout is also used for 'guest-sync'. If there is
no custom timeout or if the custom timeout is longer than 5 seconds, we
will continue to use the 5-second timeout.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When using the fine grained access control mechanism for APIs, when a
client connects to libvirtd, the latter will fetch the uid, gid, selinux
info of the remote client on the UNIX domain socket. This is then used
as the identity when checking ACLs.
With the new split daemons things are a bit more complicated. The user
can connect to virtproxyd, which in turn connects to virtqemud. When
virtqemud requests the identity over the UNIX domain socket, it will
get the identity that virtproxyd is running as, not the identity of
the real end user/application.
virproxyd knows what the real identity is, and needs to be able to
forward this information to virtqemud. The virConnectSetIdentity API
provides a mechanism for doing this. Obviously virtqemud should not
accept such identity overrides from any client, it must only honour it
from a trusted client, aka one running as the same uid/gid as itself.
The typed parameters exposed in the API are the same as those currently
supported by the internal virIdentity class, with a few small name
changes.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This API is intended to aggregate several guest agent information
queries and is ispired by stats API virDomainListGetStats(). It is
anticipated that this information will be provided by a guest agent
running within the domain.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce a bunch of new public APIs related to backup checkpoints.
Checkpoints are modeled heavily after virDomainSnapshotPtr (both
represent a point in time of the guest), although a snapshot exists
with the intent of rolling back to that state, while a checkpoint
exists to make it possible to create an incremental backup at a later
time. We may have a future hypervisor that can completely manage
checkpoints without libvirt metadata, but the first two planned
hypervisors (qemu and test) both always use libvirt for tracking
metadata relations between checkpoints, so for now, I've deferred
the counterpart of virDomainSnapshotHasMetadata for a separate
API addition at a later date if there is ever a need for it.
Note that until we allow snapshots and checkpoints to exist
simultaneously on the same domain (although the actual prevention of
this will be in a separate patch for the sake of an easier revert down
the road), that it is not possible to branch out to create more than
one checkpoint child to a given parent, although it may become
possible later when we revert to a snapshot that coincides with a
checkpoint. This also means that for now, the decision of which
checkpoint becomes the parent of a newly created one is the only
checkpoint with no child (so while there are APIs for dealing with a
current snapshot, we do not need those for checkpoints). We may end
up exposing a notion of a current checkpoint later, but it's easier to
add stuff when proven needed than to blindly support it now and wish
we hadn't exposed it.
The following map shows the API relations to snapshots, with new APIs
on the right:
Operate on a domain object to create/redefine a child:
virDomainSnapshotCreateXML virDomainCheckpointCreateXML
Operate on a child object for lifetime management:
virDomainSnapshotDelete virDomainCheckpointDelete
virDomainSnapshotFree virDomainCheckpointFree
virDomainSnapshotRef virDomainCheckpointRef
Operate on a child object to learn more about it:
virDomainSnapshotGetXMLDesc virDomainCheckpointGetXMLDesc
virDomainSnapshotGetConnect virDomainCheckpointGetConnect
virDomainSnapshotGetDomain virDomainCheckpointGetDomain
virDomainSnapshotGetName virDomainCheckpiontGetName
virDomainSnapshotGetParent virDomainCheckpiontGetParent
virDomainSnapshotHasMetadata (deferred for later)
virDomainSnapshotIsCurrent (no counterpart, see note above)
Operate on a domain object to list all children:
virDomainSnapshotNum (no counterparts, these are the old
virDomainSnapshotListNames racy interfaces)
virDomainSnapshotListAllSnapshots virDomainListAllCheckpoints
Operate on a child object to list descendents:
virDomainSnapshotNumChildren (no counterparts, these are the old
virDomainSnapshotListChildrenNames racy interfaces)
virDomainSnapshotListAllChildren virDomainCheckpointListAllChildren
Operate on a domain to locate a particular child:
virDomainSnapshotLookupByName virDomainCheckpointLookupByName
virDomainSnapshotCurrent (no counterpart, see note above)
virDomainHasCurrentSnapshot (no counterpart, old racy interface)
Operate on a snapshot to roll back to earlier state:
virDomainSnapshotRevert (no counterpart, instead checkpoints
are used in incremental backups via
XML to virDomainBackupBegin)
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Require that all headers are guarded by a symbol named
LIBVIRT_$FILENAME
where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.
Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Create a new API that will allow an adjustment of IOThread
polling parameters for the specified IOThread. These parameters
will not be saved in the guest XML. Currently the only parameters
supported will allow the hypervisor to adjust the parameters used
to limit and alter the scope of the polling interval. The polling
interval allows the IOThread to spend more or less time processing
in the guest.
Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>
to add virDomainAddIOThreadParams and virDomainModIOThreadParams.
Modification of those changes to use virDomainSetIOThreadParams
instead and remove concepts related to saving the data in guest
XML as well as the way to specifically enable the polling parameters.
Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
The API can be used outside the libvirt to get the launch security
information. When SEV is enabled, the API can be used to get the
measurement of the launch process.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The API can be used by application to retrieve the Platform Diffie-Hellman
Key and Platform Certificate chain.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The new API computes the most feature-rich CPU which is compatible with
all given CPUs and can be provided by the specified hypervisor. It is a
more useful version of virConnectBaselineCPU, which doesn't consider any
hypervisor capabilities when computing the best CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
This new API compares the given CPU description with the CPU the
specified hypervisor is able to provide on the host. It is a more useful
version of virConnectCompareCPU, which compares the CPU definition with
the host CPU without considering any specific hypervisor and its
abilities.
https://bugzilla.redhat.com/show_bug.cgi?id=1559832https://bugzilla.redhat.com/show_bug.cgi?id=1559835
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
When detaching a device it can be uniquely identified by its
alias. Instead of misusing virDomainDetachDeviceFlags which has
the same signature introduce new function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Currently the virDrvConnectOpen method is supposed to handle both
opening an explicit URI and auto-probing a driver if no URI is
given. Introduce a dedicated virDrvConnectURIProbe method to enable the
probing functionality to be split from the driver opening functionality.
It is still possible for NULL to be passed to the virDrvConnectOpen
method after this change, because the remote driver needs special
handling to enable probing of the URI against a remote libvirtd daemon.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1497396
The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Similar to domainSaveImageDefineXML this commit adds domainManagedSaveDefineXML
API which allows to edit domain's managed save state xml configuration.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Similar to domainSaveImageGetXMLDesc this commit adds domainManagedSaveGetXMLDesc
API which allows to get the xml of managed save state domain.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
Similarly to domainSetGuestVcpus this commit adds API which allows to
modify state of individual vcpus rather than just setting the count.
This allows to enable CPUs in specific guest NUMA nodes to achieve any
necessary configuration.
Our internal APIs mostly use virArch rather than strings. Switching
cpuGetModels to virArch will save us from unnecessary conversions in the
future.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
To allow finer-grained control of vcpu state using guest agent this API
can be used to individually set the state of the vCPU.
This will allow to better control NUMA enabled guests and/or test
various vCPU configurations.
Add a rather universal API implemented via typed params that will allow
to query the guest agent for the state and possibly other aspects of
guest vcpus.
The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.
There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
API agreed on in
https://www.redhat.com/archives/libvir-list/2015-October/msg00872.html
* include/libvirt/libvirt-domain.h (virDomainGetPerfEvents,
virDomainSetPerfEvents): New declarations.
* src/libvirt_public.syms: Export new symbols.
* src/driver-hypervisor.h (virDrvDomainGetPerfEvents,
virDrvDomainSetPerfEvents): New typedefs.
* src/libvirt-domain.c: Implement virDomainGetPerfEvents and
virDomainSetPerfEvents.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-2-git-send-email-qiaowei.ren@intel.com
To use post-copy one has to start the migration with
VIR_MIGRATE_POSTCOPY flag and, while migration is in progress, call
virDomainMigrateStartPostCopy() to switch from pre-copy to post-copy.
Signed-off-by: Cristian Klein <cristiklein@gmail.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Also, among with this new API new ACL that restricts rename
capability is invented too.
Signed-off-by: Tomas Meszaros <exo@tty.sk>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For setting passwords of users inside the domain.
With the VIR_DOMAIN_PASSWORD_ENCRYPTED flag set, the password
is assumed to be already encrypted by the method required
by the guest OS.
https://bugzilla.redhat.com/show_bug.cgi?id=1174177
Define helper function virDomainInterfaceFree, which allows
the upper layer application to free the domain interface object
conveniently.
The API is going to provide multiple methods by flags, e.g.
* Query guest agent
* Parse DHCP lease file
include/libvirt/libvirt-domain.h
* Define virDomainInterfaceAddresses, virDomainInterfaceFree
* Define structs virDomainInterface, virDomainIPAddress
src/driver-hypervisor.h:
* Define domainInterfaceAddresses
src/libvirt-domain.c:
* Implement virDomainInterfaceAddresses
* Implement virDomainInterfaceFree
src/libvirt_public.syms:
* Export the new symbols
Signed-off-by: Nehal J Wani <nehaljw.kkd1@gmail.com>
Add virDomainPinIOThread to allow setting the CPU affinity for a specific
IOThread based on the output generated from virDomainGetIOThreadsInfo
The API supports updating both the --live domain and the --config data
Add virDomainGetIOThreadInfo in order to return a list of
virDomainIOThreadInfoPtr structures which list the IOThread ID
and the CPU Affinity map for each IOThread for the domain.
For an active domain, the live data will be returned, while for
an inactive domain, the config data will be returned.
The API supports either the --live or --config flag, but not both.
Also added virDomainIOThreadsInfoFree in order to free the cpumap
and the IOThreadInfo structure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainDefineXML method is one of the few that still lacks
an 'unsigned int flags' parameter. This will be needed for adding
XML validation to this API. virDomainCreateXML fortunately already
has flags.
virDomainGetFSInfo returns a list of filesystems information mounted in the
guest, which contains mountpoints, device names, filesystem types, and
device aliases named by libvirt. This will be useful, for example, to
specify mountpoints to fsfreeze when taking snapshot of a part of disks.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
With the large number of APIs in libvirt the driver.h file,
it is easy to get lost looking for things. Split each driver
into a separate header file based on the functional driver
groups.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>