Commit Graph

238 Commits

Author SHA1 Message Date
Daniel P. Berrange
e8fd8757c8 Change logging category parameter into an enum
The 'const char *category' parameter only has a few possible
values now that the filename has been separated. Turn this
parameter into an enum instead.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-28 10:39:28 +01:00
Benjamin Cama
db488c7917 network: fix dnsmasq/radvd binding to IPv6 on recent kernels
I hit this problem recently when trying to create a bridge with an IPv6
address on a 3.2 kernel: dnsmasq (and, further, radvd) would not bind to
the given address, waiting 20s and then giving up with -EADDRNOTAVAIL
(resp. exiting immediately with "error parsing or activating the config
file", without libvirt noticing it, BTW). This can be reproduced with (I
think) any kernel >= 2.6.39 and the following XML (to be used with
"virsh net-create"):

        <network>
          <name>test-bridge</name>
          <bridge name='testbr0' />
          <ip family='ipv6' address='fd00::1' prefix='64'>
          </ip>
        </network>

(it happens even when you have an IPv4, too)

The problem is that since commit [1] (which, ironically, was made to
“help IPv6 autoconfiguration”) the linux bridge code makes bridges
behave like “real” devices regarding carrier detection. This makes the
bridges created by libvirt, which are started without any up devices,
stay with the NO-CARRIER flag set, and thus prevents DAD (Duplicate
address detection) from happening, thus letting the IPv6 address flagged
as “tentative”. Such addresses cannot be bound to (see RFC 2462), so
dnsmasq fails binding to it (for radvd, it detects that "interface XXX
is not RUNNING", thus that "interface XXX does not exist, ignoring the
interface" (sic)). It seems that this behavior was enhanced somehow with
commit [2] by avoiding setting NO-CARRIER on empty bridges, but I
couldn't reproduce this behavior on my kernel. Anyway, with the “dummy
tap to set MAC address” trick, this wouldn't work.

To fix this, the idea is to get the bridge's attached device to be up so
that DAD can happen (deactivating DAD altogether is not a good idea, I
think). Currently, libvirt creates a dummy TAP device to set the MAC
address of the bridge, keeping it down. But even if we set this device
up, it is not RUNNING as soon as the tap file descriptor attached to it
is closed, thus still preventing DAD. So, we must modify the API a bit,
so that we can get the fd, keep the tap device persistent, run the
daemons, and close it after DAD has taken place. After that, the bridge
will be flagged NO-CARRIER again, but the daemons will be running, even
if not happy about the device's state (but we don't really care about
the bridge's daemons doing anything when no up interface is connected to
it).

Other solutions that I envisioned were:
      * Keeping the *-nic interface up: this would waste an fd for each
        bridge during all its life. May be acceptable, I don't really
        know.
      * Stop using the dummy tap trick, and set the MAC address directly
        on the bridge: it is possible since quite some time it seems,
        even if then there is the problem of the bridge not being
        RUNNING when empty, contrary to what [2] says, so this will need
        fixing (and this fix only happened in 3.1, so it wouldn't work
        for 2.6.39)
      * Using the --interface option of dnsmasq, but I saw somewhere
        that it's not used by libvirt for backward compatibility. I am
        not sure this would solve this problem, though, as I don't know
        how dnsmasq binds itself to it with this option.

This is why this patch does what's described earlier.

This patch also makes radvd start even if the interface is
“missing” (i.e. it is not RUNNING), as it daemonizes before binding to
it, and thus sometimes does it after the interface has been brought down
by us (by closing the tap fd), and then originally stops. This also
makes it stop yelling about it in the logs when the interface is down at
a later time.

[1]
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=1faa4356a3bd89ea11fb92752d897cff3a20ec0e
[2]
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=b64b73d7d0c480f75684519c6134e79d50c1b341
2012-09-27 11:17:52 -06:00
Daniel P. Berrange
e5e2b65cf8 Move virProcessKill into virprocess.{h,c}
There are a number of process related functions spread
across multiple files. Start to consolidate them by
creating a virprocess.{c,h} file

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-26 10:09:57 +01:00
Daniel P. Berrange
cf470068a1 Rename virKillProcess to virProcessKill
Changing naming to follow the convention of "object" followed
by "action"

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-09-26 10:09:57 +01:00
Eric Blake
4ecb723b9e maint: fix up copyright notice inconsistencies
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/
2012-09-20 16:30:55 -06:00
Osier Yang
8268a24548 node_memory: Support get/set memory parameters for drivers
Including QEMU, LXC, UML, XEN drivers.
2012-09-17 13:55:22 +08:00
Laine Stump
b3bd5d6c5a network: get vlan info for Open vSwitch interfaces from proper source
This bug was revealed by the crash described in

  https://bugzilla.redhat.com/show_bug.cgi?id=852383

The vlan info pointer sent to virNetDevOpenvswitchAddPort should never
be non-NULL unless there is at least one tag. The factthat such a vlan
info pointer was receveid pointed out that a caller was passing the
wrong pointer. Instead of sending &net->vlan, the result of
virDomainNetGetActualVlan(net) should be sent - that function will
look for vlan info in net->data.network.actual->vlan, and in cany case
return NULL instead of a pointer if the vlan info it finds has no
tags.

Aside from causing the crash, sending a hardcoded &net->vlan has the
effect of ignoring vlan info from a <network> or <portgroup> config.
2012-08-30 18:05:18 +08:00
Kyle Mestery
7d2b91b86a network: add support for setting VLANs on Open vSwitch ports
Add the ability to support VLAN tags for Open vSwitch virtual port
types. To accomplish this, modify virNetDevOpenvswitchAddPort and
virNetDevTapCreateInBridgePort to take a virNetDevVlanPtr
argument. When adding the port to the OVS bridge, setup either a
single VLAN or a trunk port based on the configuration from the
virNetDevVlanPtr.

Signed-off-by: Kyle Mestery <kmestery@cisco.com>
2012-08-17 11:12:29 -04:00
Osier Yang
bb705e2519 Destroy virdomainlist.[ch]
As the consensus in:
https://www.redhat.com/archives/libvir-list/2012-July/msg01692.html,
this patch is to destroy conf/virdomainlist.[ch], folding the
helpers into conf/domain_conf.[ch].

* src/Makefile.am:
  - Various indention fixes incidentally
  - Add macro DATATYPES_SOURCES (datatypes.[ch])
  - Link datatypes.[ch] for libvirt_lxc

* src/conf/domain_conf.c:
  - Move all the stuffs from virdomainlist.c into it
  - Use virUnrefDomain and virUnrefDomainSnapshot instead of
    virDomainFree and virDomainSnapshotFree, which are defined
    in libvirt.c, and we don't want to link to it.
  - Remove "if" before "free" the object, as virObjectUnref
    is in the list "useless_free_options".

* src/conf/domain_conf.h:
  - Move all the stuffs from virdomainlist.h into it
  - s/LIST_FILTER/LIST_DOMAINS_FILTER/

* src/libxl/libxl_driver.c:
  - s/LIST_FILTER/LIST_DOMAINS_FILTER/
  - no (include "virdomainlist.h")

* src/libxl/libxl_driver.c: Likewise

* src/lxc/lxc_driver.c: Likewise

* src/openvz/openvz_driver.c: Likewise

* src/parallels/parallels_driver.c: Likewise

* src/qemu/qemu_driver.c: Likewise

* src/test/test_driver.c: Likewise

* src/uml/uml_driver.c: Likewise

* src/vbox/vbox_tmpl.c: Likewise

* src/vmware/vmware_driver.c: Likewise

* tools/virsh-domain-monitor.c: Likewise

* tools/virsh.c: Likewise
2012-08-14 17:27:49 +08:00
Laine Stump
b8a56f12f5 nwfilter: fix crash during filter define when lxc driver failed startup
The meat of this patch is just moving the calls to
virNWFilterRegisterCallbackDriver from each hypervisor's "register"
function into its "initialize" function. The rest is just code
movement to allow that, and a new virNWFilterUnRegisterCallbackDriver
function to undo what the register function does.

The long explanation:

There is an array in nwfilter called callbackDrvArray that has
pointers to a table of functions for each hypervisor driver that are
called by nwfilter. One of those function pointers is to a function
that will lock the hypervisor driver. Entries are added to the table
by calling each driver's "register" function, which happens quite
early in libvirtd's startup.

Sometime later, each driver's "initialize" function is called. This
function allocates a driver object and stores a pointer to it in a
static variable that was previously initialized to NULL. (and here's
the important part...) If the "initialize" function fails, the driver
object is freed, and that pointer set back to NULL (but the entry in
nwfilter's callbackDrvArray is still there).

When the "lock the driver" function mentioned above is called, it
assumes that the driver was successfully loaded, so it blindly tries
to call virMutexLock on "driver->lock".

BUT, if the initialize never happened, or if it failed, "driver" is
NULL. And it just happens that "lock" is always the first field in
driver so it is also NULL.

Boom.

To fix this, the call to virNWFilterRegisterCallbackDriver for each
driver shouldn't be called until the end of its (*already guaranteed
successful*) "initialize" function, not during its "register" function
(which is currently the case). This implies that there should also be
a virNWFilterUnregisterCallbackDriver() function that is called in a
driver's "shutdown" function (although in practice, that function is
currently never called).
2012-08-09 23:28:00 -04:00
Osier Yang
f9ce7dad60 Desert the FSF address in copyright
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c
2012-07-23 10:50:50 +08:00
Daniel P. Berrange
e2038d2d30 Replace use of umlReportError with virReportError
Update the UML driver to use virReportError instead of the
umlReportError custom macro

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-19 14:41:49 +01:00
Daniel P. Berrange
95c2c19f06 Don't autostart domains when reloading config
When sending SIGHUP to libvirtd, it will trigger the virStateDriver
reload operation. This is intended to reload the configuration files
for guests. For unknown historical reasons this is also triggering
autostart of all guests. Autostart is generally expected to be
something that happens on OS startup. Starting VMs on SIGHUP will
violate that expectation and potentially cause dangerous scenarios
if the admin has explicitly shutdown a misbehaving VM that has
been marked as autostart

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-19 10:18:26 +01:00
Stefan Berger
387117ad92 Convert 'raw MAC address' usages to use virMacAddr
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer

then replace raw MAC addresses by replacing

- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr

and introduce usage of above functions where necessary.
2012-07-17 08:07:59 -04:00
Peter Krempa
33dc8cf018 drivers: Implement virListAllDomains for drivers using virDomainObj
This patch adds support for listing all domains into drivers that use
the common virDomainObj implementation: libxl, lxc, openvz, qemu, test,
uml, vmware.

For drivers that don't support managed save images the guests are
treated as if they had none, so filtering guests that do have such an
image on this driver succeeds and produces 0 results.
2012-06-20 13:35:26 +02:00
Daniel P. Berrange
517368a377 Remove uid param from directory lookup APIs
Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory

These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-28 10:55:06 +01:00
Daniel P. Berrange
2cb0899eec Fix potential events deadlock when unref'ing virConnectPtr
When the last reference to a virConnectPtr is released by
libvirtd, it was possible for a deadlock to occur in the
virDomainEventState functions. The virDomainEventStatePtr
holds a reference on virConnectPtr for each registered
callback. When removing a callback, the virUnrefConnect
function is run. If this causes the last reference on the
virConnectPtr to be released, then virReleaseConnect can
be run, which in turns calls qemudClose. This function has
a call to virDomainEventStateDeregisterConn which is intended
to remove all callbacks associated with the virConnectPtr
instance. This will try to grab a lock on virDomainEventState
but this lock is already held. Deadlock ensues

Thread 1 (Thread 0x7fcbb526a840 (LWP 23185)):

Since each callback associated with a virConnectPtr holds a
reference on virConnectPtr, it is impossible for the qemudClose
method to be invoked while any callbacks are still registered.
Thus the call to virDomainEventStateDeregisterConn must in fact
be a no-op. Thus it is possible to just remove all trace of
virDomainEventStateDeregisterConn and avoid the deadlock.

* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Delete virDomainEventStateDeregisterConn
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
  src/qemu/qemu_driver.c, src/uml/uml_driver.c: Remove
  calls to virDomainEventStateDeregisterConn
2012-05-21 18:50:47 +01:00
William Jon McCann
32a9aac2e0 Use XDG Base Directories instead of storing in home directory
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html

This offers a number of advantages:
 * Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
 * Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
 * Supports performing smart or selective migration of settings
between different OS versions
 * Supports reseting settings without breaking things
 * Makes it possible to clear cache data to make room when the disk
is filling up
 * Allows us to write a robust and efficient backup solution
 * Allows an admin flexibility to change where data and settings are stored
 * Dramatically reduces the complexity and incoherence of the
system for administrators
2012-05-14 15:15:58 +01:00
MATSUDA, Daiki
257191c9e4 UML: fix iteration over consoles
I found typo in UML driver.

MATSUDA Daiki
2012-04-09 10:21:07 -06:00
Daniel P. Berrange
ec8cae93db Consistent style for usage of sizeof operator
The code is splattered with a mix of

  sizeof foo
  sizeof (foo)
  sizeof(foo)

Standardize on sizeof(foo) and add a syntax check rule to
enforce it

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-03-30 11:47:24 +01:00
Daniel P. Berrange
1f66c18f79 Centralize error reporting for URI parsing/formatting problems
Move error reporting out of the callers, into virURIParse
and virURIFormat, to get consistency.

* include/libvirt/virterror.h, src/util/virterror.c: Add VIR_FROM_URI
* src/util/viruri.c, src/util/viruri.h: Add error reporting
* src/esx/esx_driver.c, src/libvirt.c, src/libxl/libxl_driver.c,
  src/lxc/lxc_driver.c, src/openvz/openvz_driver.c,
  src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
  src/remote/remote_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/vmx/vmx.c, src/xen/xen_driver.c,
  src/xen/xend_internal.c, tests/viruritest.c: Remove error
  reporting

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-03-23 12:59:21 +00:00
Ansis Atteka
ac8bbdbdfa Attach vm-id to Open vSwitch interfaces.
This patch will allow OpenFlow controllers to identify which interface
belongs to a particular VM by using the Domain UUID.

ovs-vsctl get Interface vnet0 external_ids
{attached-mac="52:54:00:8C:55:2C", iface-id="83ce45d6-3639-096e-ab3c-21f66a05f7fa", iface-status=active, vm-id="142a90a7-0acc-ab92-511c-586f12da8851"}

V2 changes:
Replaced vm-uuid with vm-id. There was a discussion in Open vSwitch
mailinglist that we should stick with the same DB key postfixes for the
sake of consistency (e.g iface-id, vm-id ...).
2012-03-08 14:44:15 -05:00
Eric Blake
4888f0fb56 xml: use better types for memory values
Using 'unsigned long' for memory values is risky on 32-bit platforms,
as a PAE guest can have more than 4GiB memory.  Our API is
(unfortunately) locked at 'unsigned long' and a scale of 1024, but
the rest of our system should consistently use 64-bit values,
especially since the previous patch centralized overflow checking.

* src/conf/domain_conf.h (_virDomainDef): Always use 64-bit values
for memory.  Change hugepage_backed to a bool.
* src/conf/domain_conf.c (virDomainDefParseXML)
(virDomainDefCheckABIStability, virDomainDefFormatInternal): Fix
clients.
* src/vmx/vmx.c (virVMXFormatConfig): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxpr, xenFormatSxpr): Likewise.
* src/xenxs/xen_xm.c (xenXMConfigGetULongLong): New function.
(xenXMConfigGetULong, xenXMConfigSetInt): Avoid truncation.
(xenParseXM, xenFormatXM): Fix clients.
* src/phyp/phyp_driver.c (phypBuildLpar): Likewise.
* src/openvz/openvz_driver.c (openvzDomainSetMemoryInternal):
Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainDefineXML): Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_process.c (qemuProcessStart): Likewise.
* src/qemu/qemu_monitor.h (qemuMonitorGetBalloonInfo): Likewise.
* src/qemu/qemu_monitor_text.h (qemuMonitorTextGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONGetBalloonInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONGetBalloonInfo):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetInfo)
(qemuDomainGetXMLDesc): Likewise.
* src/uml/uml_conf.c (umlBuildCommandLine): Likewise.
2012-03-07 18:24:44 -07:00
Eric Blake
73b9977140 xml: use long long internally, to centralize overflow checks
On 64-bit platforms, unsigned long and unsigned long long are
identical, so we don't have to worry about overflow checks.
On 32-bit platforms, anywhere we narrow unsigned long long back
to unsigned long, we have to worry about overflow; it's easier
to do this in one place by having most of the code use the same
or wider types, and only doing the narrowing at the last minute.
Therefore, the memory set commands remain unsigned long, and
the memory get command now centralizes the overflow check into
libvirt.c, so that drivers don't have to repeat the work.

This also fixes a bug where xen returned the wrong value on
failure (most APIs return -1 on failure, but getMaxMemory
must return 0 on failure).

* src/driver.h (virDrvDomainGetMaxMemory): Use long long.
* src/libvirt.c (virDomainGetMaxMemory): Raise overflow.
* src/test/test_driver.c (testGetMaxMemory): Fix driver.
* src/rpc/gendispatch.pl (name_to_ProcName): Likewise.
* src/xen/xen_hypervisor.c (xenHypervisorGetMaxMemory): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainGetMaxMemory): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xend_internal.h (xenDaemonDomainGetMaxMemory):
Likewise.
* src/xen/xm_internal.c (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xm_internal.h (xenXMDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.c (xenStoreDomainGetMaxMemory): Likewise.
* src/xen/xs_internal.h (xenStoreDomainGetMaxMemory): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetMaxMemory):
Likewise.
* src/esx/esx_driver.c (esxDomainGetMaxMemory): Likewise.
* src/libxl/libxl_driver.c (libxlDomainGetMaxMemory): Likewise.
* src/qemu/qemu_driver.c (qemudDomainGetMaxMemory): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetMaxMemory): Likewise.
* src/uml/uml_driver.c (umlDomainGetMaxMemory): Likewise.
2012-03-07 18:24:43 -07:00
Laine Stump
3b1c191fe7 conf: parse/format type='hostdev' network interfaces
This is the new interface type that sets up an SR-IOV PCI network
device to be assigned to the guest with PCI passthrough after
initializing some network device-specific things from the config
(e.g. MAC address, virtualport profile parameters). Here is an example
of the syntax:

  <interface type='hostdev' managed='yes'>
    <source>
      <address type='pci' domain='0' bus='0' slot='4' function='3'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
    <address type='pci' domain='0' bus='0' slot='7' function='0'/>
  </interface>

This would assign the PCI card from bus 0 slot 4 function 3 on the
host, to bus 0 slot 7 function 0 on the guest, but would first set the
MAC address of the card to 00:11:22:33:44:55.

NB: The parser and formatter don't care if the PCI card being
specified is a standard single function network adapter, or a virtual
function (VF) of an SR-IOV capable network adapter, but the upcoming
code that implements the back end of this config will work *only* with
SR-IOV VFs. This is because modifying the mac address of a standard
network adapter prior to assigning it to a guest is pointless - part
of the device reset that occurs during that process will reset the MAC
address to the value programmed into the card's firmware.

Although it's not supported by any of libvirt's hypervisor drivers,
usb network hostdevs are also supported in the parser and formatter
for completeness and consistency. <source> syntax is identical to that
for plain <hostdev> devices, except that the <address> element should
have "type='usb'" added if bus/device are specified:

  <interface type='hostdev'>
    <source>
      <address type='usb' bus='0' device='4'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
  </interface>

If the vendor/product form of usb specification is used, type='usb'
is implied:

  <interface type='hostdev'>
    <source>
      <vendor id='0x0012'/>
      <product id='0x24dd'/>
    </source>
    <mac address='00:11:22:33:44:55'/>
  </interface>

Again, the upcoming patch to fill in the backend of this functionality
will log an error and fail with "Unsupported Config" if you actually
try to assign a USB network adapter to a guest using <interface
type='hostdev'> - just use a standard <hostdev> entry in that case
(and also for single-port PCI adapters).
2012-03-05 23:24:28 -05:00
Laine Stump
d1c310231d util: combine bools in virNetDevTapCreateInBridgePort into flags
With an additional new bool added to determine whether or not to
discourage the use of the supplied MAC address by the bridge itself,
virNetDevTapCreateInBridgePort had three booleans (well, 2 bools and
an int used as a bool) in the arg list, which made it increasingly
difficult to follow what was going on. This patch combines those three
into a single flags arg, which not only shortens the arg list, but
makes it more self-documenting.
2012-03-02 16:04:06 -05:00
Ansis Atteka
c1b164d70c util: centralize tap device MAC address 1st byte "0xFE" modification
When a tap device for a domain is created and attached to a bridge,
the first byte of the tap device MAC address is set to 0xFE, while the
rest is set to match the MAC address that will be presented to the
guest as its network device MAC address. Setting this high value in
the tap's MAC address discourages the bridge from using the tap
device's MAC address as the bridge's own MAC address (Linux bridges
always take on the lowest numbered MAC address of all attached devices
as their own).

In one case within libvirt, a tap device is created and attached to
the bridge with the intent that its MAC address be taken on by the
bridge as its own (this is used to assure that the bridge has a fixed
MAC address to prevent network outages created by the bridge MAC
address "flapping" as guests are started and stopped). In this case,
the first byte of the mac address is *not* altered to 0xFE.

In the current code, callers to virNetDevTapCreateInBridgePort each
make the MAC address modification themselves before calling, which
leads to code duplication, and also prevents lower level functions
from knowing the real MAC address being used by the guest. The problem
here is that openvswitch bridges must be informed about this MAC
address, or they will be unable to pass traffic to/from the guest.

This patch centralizes the location of the MAC address "0xFE fixup"
into virNetDevTapCreateInBridgePort(), meaning 1) callers of this
function no longer need the extra strange bit of code, and 2)
bitNetDevTapCreateBridgeInPort itself now is called with the guest's
unaltered MAC address, and can pass it on, unmodified, to
virNetDevOpenvswitchAddPort.

There is no other behavioral change created by this patch.
2012-03-02 16:04:00 -05:00
Eric Blake
3e2c3d8f6d build: use correct type for pid and similar types
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'.  Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.

Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.

* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
2012-03-02 06:57:43 -07:00
Martin Kletzander
9f748277bb Fixed URI parsing
Function xmlParseURI does not remove square brackets around IPv6
address when parsing. One of the solutions is making wrappers around
functions working with xmlURI*. This assures that uri->server will be
always properly assigned and it doesn't have to be changed when used
on some new place in the code.
For this purpose, functions virParseURI and virSaveURI were
added. These function are wrappers around xmlParseURI and xmlSaveUri
respectively.
Also there is one new syntax check function to prohibit these functions
anywhere else.

File changes:
 - src/util/viruri.h        -- declaration
 - src/util/viruri.c        -- definition
 - src/libvirt_private.syms -- symbol export
 - src/Makefile.am          -- added source and header files
 - cfg.mk                   -- added sc_prohibit_xmlURI
 - all others               -- ID name and include fixes
2012-02-24 16:49:21 -07:00
Ansis Atteka
df81004632 network: support Open vSwitch
This patch allows libvirt to add interfaces to already
existing Open vSwitch bridges. The following syntax in
domain XML file can be used:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
        <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'/>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

or if libvirt should auto-generate the interfaceid use
following syntax:

    <interface type='bridge'>
      <mac address='52:54:00:d0:3f:f2'/>
      <source bridge='ovsbr'/>
      <virtualport type='openvswitch'>
      </virtualport>
      <address type='pci' domain='0x0000' bus='0x00'
                          slot='0x03' function='0x0'/>
    </interface>

It is also possible to pass an optional profileid. To do that
use following syntax:

   <interface type='bridge'>
     <source bridge='ovsbr'/>
     <mac address='00:55:1a:65:a2:8d'/>
     <virtualport type='openvswitch'>
       <parameters interfaceid='921a80cd-e6de-5a2e-db9c-ab27f15a6e1d'
                   profileid='test-profile'/>
     </virtualport>
   </interface>

To create Open vSwitch bridge install Open vSwitch and
run the following command:

    ovs-vsctl add-br ovsbr
2012-02-15 16:04:54 -05:00
Daniel P. Berrange
1d5c7a9fdf Rename hash.h and hash.c to virhash.h and virhash.c
In preparation for the patch to include Murmurhash3, which
introduces a virhashcode.h and virhashcode.c files, rename
the existing hash.h and hash.c to virhash.h and virhash.c
respectively.
2012-01-26 14:11:13 +00:00
Daniel P. Berrange
0b7ddf9e77 Add new virDomainShutdownFlags API
Add a new API virDomainShutdownFlags and define:

    VIR_DOMAIN_SHUTDOWN_DEFAULT        = 0,
    VIR_DOMAIN_SHUTDOWN_ACPI_POWER_BTN = (1 << 0),
    VIR_DOMAIN_SHUTDOWN_GUEST_AGENT    = (1 << 1),

Also define some flags for the reboot API

    VIR_DOMAIN_REBOOT_DEFAULT        = 0,
    VIR_DOMAIN_REBOOT_ACPI_POWER_BTN = (1 << 0),
    VIR_DOMAIN_REBOOT_GUEST_AGENT    = (1 << 1),

Although these two APIs currently have the same flags, using
separate enums allows them to expand separately in the future.

Add stub impls of the new API for all existing drivers
2012-01-24 12:19:51 +01:00
Laine Stump
1734cdb995 config: report error when script given for inappropriate interface type
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=638633

Although scripts are not used by interfaces of type other than
"ethernet" in qemu, due to the fact that the parser stores the script
name in a union that is only valid when type is ethernet or bridge,
there is no way for anyone except the parser itself to catch the
problem of specifying an interface script for an inappropriate
interface type (by the time the parsed data gets back to the code that
called the parser, all evidence that a script was specified is
forgotten).

Since the parser itself should be agnostic to which type of interface
allows scripts (an example of why: a script specified for an interface
of type bridge is valid for xen domains, but not for qemu domains),
the solution here is to move the script out of the union(s) in the
DomainNetDef, always populate it when specified (regardless of
interface type), and let the driver decide whether or not it is
appropriate.

Currently the qemu, xen, libxml, and uml drivers recognize the script
parameter and do something with it (the uml driver only to report that
it isn't supported). Those drivers have been updated to log a
CONFIG_UNSUPPORTED error when a script is specified for an interface
type that's inappropriate for that particular hypervisor.

(NB: There was earlier discussion of solving this problem by adding a
VALIDATE flag to all libvirt APIs that accept XML, which would cause
the XML to be validated against the RNG files. One statement during
that discussion was that the RNG shouldn't contain hypervisor-specific
things, though, and a proper solution to this problem would require
that (again, because a script for an interface of type "bridge" is
accepted by xen, but not by qemu).
2012-01-08 10:52:24 -05:00
Daniel P. Berrange
707781fe12 Only add the timer when a callback is registered
The lifetime of the virDomainEventState object is tied to
the lifetime of the driver, which in stateless drivers is
tied to the lifetime of the virConnectPtr.

If we add & remove a timer when allocating/freeing the
virDomainEventState object, we can get a situation where
the timer still triggers once after virDomainEventState
has been freed. The timeout callback can't keep a ref
on the event state though, since that would be a circular
reference.

The trick is to only register the timer when a callback
is registered with the event state & remove the timer
when the callback is unregistered.

The demo for the bug is to run

  while true ; do date ; ../tools/virsh -q -c test:///default 'shutdown test; undefine test; dominfo test' ; done

prior to this fix, it will frequently hang and / or
crash, or corrupt memory
2011-12-19 11:08:25 +00:00
Daniel P. Berrange
34ad13536e Hide use of timers for domain event dispatch
Currently all drivers using domain events need to provide a callback
for handling a timer to dispatch events in a clean stack. There is
no technical reason for dispatch to go via driver specific code. It
could trivially be dispatched directly from the domain event code,
thus removing tedious boilerplate code from all drivers

Also fix the libxl & xen drivers to pass 'true' when creating the
virDomainEventState, since they run inside the daemon & thus always
expect events to be present.

* src/conf/domain_event.c, src/conf/domain_event.h: Internalize
  dispatch of events from timer callback
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
  src/qemu/qemu_domain.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/xen/xen_driver.c: Remove all timer dispatch functions
2011-12-19 11:08:24 +00:00
Daniel P. Berrange
7b87a30f15 Convert drivers to thread safe APIs for adding callbacks
* src/libxl/libxl_driver.c, src/lxc/lxc_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/test/test_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Convert
  to threadsafe APIs
2011-12-19 11:08:10 +00:00
Daniel P. Berrange
d09f6ba5fe Return count of callbacks when registering callbacks
When registering a callback for a particular event some callers
need to know how many callbacks already exist for that event.
While it is possible to ask for a count, this is not free from
race conditions when threaded. Thus the API for registering
callbacks should return the count of callbacks. Also rename
virDomainEventStateDeregisterAny to virDomainEventStateDeregisterID

* src/conf/domain_event.c, src/conf/domain_event.h,
  src/libvirt_private.syms: Return count of callbacks when
  registering callbacks
* src/libxl/libxl_driver.c, src/libxl/libxl_driver.c,
  src/qemu/qemu_driver.c, src/remote/remote_driver.c,
  src/remote/remote_driver.c, src/uml/uml_driver.c,
  src/vbox/vbox_tmpl.c, src/xen/xen_driver.c: Update
  for change in APIs
2011-12-19 11:08:10 +00:00
Stefan Berger
33eb3567dd Pass the VM's UUID into the nwfilter subsystem
A preparatory patch for DHCP snooping where we want to be able to
differentiate between a VM's interface using the tuple of
<VM UUID, Interface MAC address>. We assume that MAC addresses could
possibly be re-used between different networks (VLANs) thus do not only
want to rely on the MAC address to identify an interface.

At the current 'final destination' in virNWFilterInstantiate I am leaving
the vmuuid parameter as ATTRIBUTE_UNUSED until the DHCP snooping patches arrive.
(we may not post the DHCP snooping patches for 0.9.9, though)

Mostly this is a pretty trivial patch. On the lowest layers, in lxc_driver
and uml_conf, I am passing the virDomainDefPtr around until I am passing
only the VM's uuid into the NWFilter calls.
2011-12-08 21:35:20 -05:00
Stefan Berger
95ff5899b9 nwfilter: cleanup return codes in nwfilter subsystem
This patch cleans up return codes in the nwfilter subsystem.

Some functions in nwfilter_conf.c (validators and formatters) are
keeping their bool return for now and I am converting their return
code to true/false.

All other functions now have failure return codes of -1 and success
of 0.

[I searched for all occurences of ' 1;' and checked all 'if ' and
adapted where needed. After that I did a grep for 'NWFilter' in the source
tree.]
2011-12-08 21:26:34 -05:00
Eric Blake
a699793449 maint: typo fixes
Many of these were mentioned by Yuri Chornoivan in:
https://bugzilla.redhat.com/show_bug.cgi?id=669506

* src/esx/esx_vi.c (esxVI_WaitForTaskCompletion): Fix spelling.
* src/conf/netdev_vport_profile_conf.c
(virNetDevVPortProfileParse): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainSetVcpusFlags):
Likewise.
* src/xen/xm_internal.c (xenXMDomainSetVcpusFlags): Likewise.
* src/esx/esx_util.c (esxUtil_ResolveHostname): Likewise.
* src/storage/storage_backend_fs.c
(virStorageBackendFileSystemBuild): Likewise.
* daemon/libvirtd.conf: Likewise.
* src/util/logging.c (virLogMessage): Likewise.
* src/uml/uml_conf.c (umlBuildCommandLineNet): Likewise.
* src/vmx/vmx.c (virVMXFormatEthernet): Likewise.
2011-12-01 16:08:34 -07:00
Alex Jia
d7cc2520f2 uml: Plug memory leak on umlStartVMDaemon() error path
Detected by Coverity.  Leak introduced in commit 8866eed.

Two bugs here:
1. logfd wasn't closed on all return paths
2. if we failed to mark a domain autodestroy, then the domain
was not made transient but we still returned success

Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 16:37:35 -07:00
Daniel P. Berrange
9ae0b8349c Add suspend info to Xen, LXC and UML hypervisor capabilities
* src/lxc/lxc_conf.c, src/uml/uml_conf.c,
  src/xen/xen_hypervisor.c: Initialize suspend capabilities
* tests/xencapsdata/*xml: Add empty powermgmt capabilities
2011-11-30 10:12:30 +00:00
Srivatsa S. Bhat
4ddb37c395 Implement the core API to suspend/resume the host
Add the core functions that implement the functionality of the API.
Suspend is done by using an asynchronous mechanism so that we can return
the status to the caller before the host gets suspended. This asynchronous
operation is achieved by suspending the host in a separate thread of
execution. However, returning the status to the caller is only best-effort,
but not guaranteed.

To resume the host, an RTC alarm is set up (based on how long we want to
suspend) before suspending the host. When this alarm fires, the host
gets woken up.

Suspend-to-RAM operation on a host running Linux can take upto more than 20
seconds, depending on the load of the system. (Freezing of tasks, an operation
preceding any suspend operation, is given up after a 20 second timeout).
And Suspend-to-Disk can take even more time, considering the time required
for compaction, creating the memory image and writing it to disk etc.
So, we do not allow the user to specify a suspend duration of less than 60
seconds, to be on the safer side, since we don't want to prematurely declare
failure when we only had to wait for some more time.
2011-11-29 17:29:17 +08:00
Jiri Denemark
2c4cdb736c Fix version numbers for isAlive and setKeepAlive driver APIs 2011-11-24 14:44:59 +01:00
Jiri Denemark
e401b0cd02 Implement virConnectIsAlive in all drivers 2011-11-24 12:00:10 +01:00
Eric Blake
e55ec69de6 build: drop useless dirent.h includes
* .gnulib: Update to latest, for improved syntax-check.
* src/lxc/lxc_container.c (includes): Drop unused include.
* src/network/bridge_driver.c: Likewise.
* src/node_device/node_device_linux_sysfs.c: Likewise.
* src/openvz/openvz_driver.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/storage/storage_backend_iscsi.c: Likewise.
* src/storage/storage_backend_mpath.c: Likewise.
* src/uml/uml_conf.c: Likewise.
* src/uml/uml_driver.c: Likewise.
2011-11-11 14:12:37 -07:00
Daniel P. Berrange
e49c9bf25c Split bridge.h into three separate files
Following the renaming of the bridge management APIs, we can now
split the source file into 3 corresponding pieces

 * src/util/virnetdev.c: APIs for any type of network interface
 * src/util/virnetdevbridge.c: APIs for bridge interfaces
 * src/util/virnetdevtap.c: APIs for TAP interfaces

* src/util/virnetdev.c, src/util/virnetdev.h,
  src/util/virnetdevbridge.c, src/util/virnetdevbridge.h,
  src/util/virnetdevtap.c, src/util/virnetdevtap.h: Copied
  from bridge.{c,h}
* src/util/bridge.c, src/util/bridge.h: Split into 3 pieces
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/openvz/openvz_driver.c, src/qemu/qemu_command.c,
  src/qemu/qemu_conf.h, src/uml/uml_conf.c, src/uml/uml_conf.h,
  src/uml/uml_driver.c: Update #include directives
2011-11-09 16:34:25 +00:00
Daniel P. Berrange
dced27c89e Rename all brXXXX APIs to follow new convention
The existing brXXX APIs in src/util/bridge.h are renamed to
follow one of three different conventions

 - virNetDevXXX       - operations for any type of interface
 - virNetDevBridgeXXX - operations for bridge interfaces
 - virNetDevTapXXX    - operations for tap interfaces

* src/util/bridge.h, src/util/bridge.c: Rename all APIs
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/qemu/qemu_command.c, src/uml/uml_conf.c,
  src/uml/uml_driver.c: Update for API renaming
2011-11-09 16:33:28 +00:00
Daniel P. Berrange
4f4fd8f7ad Make all brXXX APIs raise errors, instead of returning errnos
Currently every caller of the brXXX APIs has to store the returned
errno value and then raise an error message. This results in
inconsistent error messages across drivers, additional burden on
the callers and makes the error reporting inaccurate since it is
hard to distinguish different scenarios from 1 errno value.

* src/util/bridge.c: Raise errors instead of returning errnos
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/qemu/qemu_command.c, src/uml/uml_conf.c,
  src/uml/uml_driver.c: Remove error reporting code
2011-11-09 16:33:19 +00:00
Daniel P. Berrange
6cfeb9a766 Remove 'brControl' object
The bridge management APIs in src/util/bridge.c require a brControl
object to be passed around. This holds the file descriptor for the
control socket. This extra object complicates use of the API for
only a minor efficiency gain, which is in turn entirely offset by
the need to fork/exec the brctl command for STP configuration.

This patch removes the 'brControl' object entirely, instead opening
the control socket & closing it again within the scope of each method.

The parameter names for the APIs are also made to consistently use
'brname' for bridge device name, and 'ifname' for an interface
device name. Finally annotations are added for non-NULL parameters
and return check validation

* src/util/bridge.c, src/util/bridge.h: Remove brControl object
  and update API parameter names & annotations.
* src/lxc/lxc_driver.c, src/network/bridge_driver.c,
  src/uml/uml_conf.h, src/uml/uml_conf.c, src/uml/uml_driver.c,
  src/qemu/qemu_command.c, src/qemu/qemu_conf.h,
  src/qemu/qemu_driver.c: Remove reference to 'brControl' object
2011-11-09 16:33:14 +00:00
Daniel P. Berrange
209c2880b9 Fix default console type setting
The default console type may vary based on the OS type. ie a Xen
paravirt guests wants a 'xen' console, while a fullvirt guests
wants a 'serial' console.

A plain integer default console type in the capabilities does
not suffice. Instead introduce a callback that is passed the
OS type.

* src/conf/capabilities.h: Use a callback for default console
  type
* src/conf/domain_conf.c, src/conf/domain_conf.h: Use callback
  for default console type. Add missing LXC/OpenVZ console types.
* src/esx/esx_driver.c, src/libxl/libxl_conf.c,
  src/lxc/lxc_conf.c, src/openvz/openvz_conf.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_capabilities.c,
  src/uml/uml_conf.c, src/vbox/vbox_tmpl.c,
  src/vmware/vmware_conf.c, src/xen/xen_hypervisor.c,
  src/xenapi/xenapi_driver.c: Set default console type callback
2011-11-03 12:01:48 +00:00
Daniel P. Berrange
8866eed097 Set aliases for LXC/UML console devices
To allow virDomainOpenConsole to access non-primary consoles,
device aliases are required to be set. Until now only the QEMU
driver has done this. Update LXC & UML to set aliases for any
console devices

* src/lxc/lxc_driver.c, src/uml/uml_driver.c: Set aliases
  for console devices
2011-11-03 12:01:43 +00:00
Daniel P. Berrange
0873b688c6 Allow multiple consoles per virtual guest
While Xen only has a single paravirt console, UML, and
QEMU both support multiple paravirt consoles. The LXC
driver can also be trivially made to support multiple
consoles. This patch extends the XML to allow multiple
<console> elements in the XML. It also makes the UML
and QEMU drivers support this config.

* src/conf/domain_conf.c, src/conf/domain_conf.h: Allow
  multiple <console> devices
* src/lxc/lxc_driver.c, src/xen/xen_driver.c,
  src/xenxs/xen_sxpr.c, src/xenxs/xen_xm.c: Update for
  internal API changes
* src/security/security_selinux.c, src/security/virt-aa-helper.c:
  Only label consoles that aren't a copy of the serial device
* src/qemu/qemu_command.c, src/qemu/qemu_driver.c,
  src/qemu/qemu_process.c, src/uml/uml_conf.c,
  src/uml/uml_driver.c: Support multiple console devices
* tests/qemuxml2xmltest.c, tests/qemuxml2argvtest.c: Extra
  tests for multiple virtio consoles. Set QEMU_CAPS_CHARDEV
  for all console /channel tests
* tests/qemuxml2argvdata/qemuxml2argv-channel-virtio-auto.args,
  tests/qemuxml2argvdata/qemuxml2argv-channel-virtio.args
  tests/qemuxml2argvdata/qemuxml2argv-console-virtio.args: Update
  for correct chardev syntax
* tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.args,
  tests/qemuxml2argvdata/qemuxml2argv-console-virtio-many.xml: New
  test file
2011-11-03 12:01:05 +00:00
Daniel P. Berrange
02e92dc470 Add support for autodestroy of guests to the LXC and UML drivers
We recently added support for VIR_DOMAIN_START_AUTODESTROY and
an impl to the QEMU driver. It is very desirable to support in
other drivers, so this adds it to LXC and UML

* src/lxc/lxc_conf.h, src/lxc/lxc_driver.c,
  src/uml/uml_conf.h, src/uml/uml_driver.c: Wire up autodestroy
  functions
2011-10-19 09:14:27 +01:00
Peter Krempa
79cf07af7c Avoid using "devname" as an identifier.
/usr/lib/stdlib.h in Mac OS X and probably also in BSD's
exports this symbol :(
2011-09-16 20:49:04 +08:00
Eric Blake
89b6284fd9 snapshot: also support disks by path
I got confused when 'virsh domblkinfo dom disk' required the
path to a disk (which can be ambiguous, since a single file
can back multiple disks), rather than the unambiguous target
device name that I was using in disk snapshots.  So, in true
developer fashion, I went for the best of both worlds - all
interfaces that operate on a disk (aka block) now accept
either the target name or the unambiguous path to the backing
file used by the disk.

* src/conf/domain_conf.h (virDomainDiskIndexByName): Add
parameter.
(virDomainDiskPathByName): New prototype.
* src/libvirt_private.syms (domain_conf.h): Export it.
* src/conf/domain_conf.c (virDomainDiskIndexByName): Also allow
searching by path, and decide whether ambiguity is okay.
(virDomainDiskPathByName): New function.
(virDomainDiskRemoveByName, virDomainSnapshotAlignDisks): Update
callers.
* src/qemu/qemu_driver.c (qemudDomainBlockPeek)
(qemuDomainAttachDeviceConfig, qemuDomainUpdateDeviceConfig)
(qemuDomainGetBlockInfo, qemuDiskPathToAlias): Likewise.
* src/qemu/qemu_process.c (qemuProcessFindDomainDiskByPath):
Likewise.
* src/libxl/libxl_driver.c (libxlDomainAttachDeviceDiskLive)
(libxlDomainDetachDeviceDiskLive, libxlDomainAttachDeviceConfig)
(libxlDomainUpdateDeviceConfig): Likewise.
* src/uml/uml_driver.c (umlDomainBlockPeek): Likewise.
* src/xen/xend_internal.c (xenDaemonDomainBlockPeek): Likewise.
* docs/formatsnapshot.html.in: Update documentation.
* tools/virsh.pod (domblkstat, domblkinfo): Likewise.
* docs/schemas/domaincommon.rng (diskTarget): Tighten pattern on
disk targets.
* docs/schemas/domainsnapshot.rng (disksnapshot): Update to match.
* tests/domainsnapshotxml2xmlin/disk_snapshot.xml: Update test.
2011-09-05 07:03:04 -06:00
Osier Yang
b3b4aba5d4 uml: Allow to undefine a running domain 2011-08-19 21:51:42 +08:00
Eric Blake
00ef048f62 fdstream: drop delete argument
Revert 6a1f5f568f.  Now that libvirt_iohelper takes fds by
inheritance rather than by open() (commit 1eb66479), there is
no longer a race where the parent can unlink() a file prior to
the iohelper open()ing the same file.  From there, it makes
more sense to have the callers both create and unlink, rather
than the caller create and the stream unlink, since the latter
was only needed when iohelper had to do the unlink.

* src/fdstream.h (virFDStreamOpenFile, virFDStreamCreateFile):
Callers are responsible for deletion.
* src/fdstream.c (virFDStreamOpenFileInternal): Don't leak created
file on failure.
(virFDStreamOpenFile, virFDStreamCreateFile): Drop parameter.
* src/lxc/lxc_driver.c (lxcDomainOpenConsole): Update callers.
* src/qemu/qemu_driver.c (qemuDomainScreenshot)
(qemuDomainOpenConsole): Likewise.
* src/storage/storage_driver.c (storageVolumeDownload)
(storageVolumeUpload): Likewise.
* src/uml/uml_driver.c (umlDomainOpenConsole): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainScreenshot): Likewise.
* src/xen/xen_driver.c (xenUnifiedDomainOpenConsole): Likewise.
2011-08-02 14:53:43 -06:00
Eric Blake
dd20328fbb conf: make 'vnet' prefix a macro
Using a macro ensures that all the code is looking for the same
prefix.

* src/conf/domain_conf.h (VIR_NET_GENERATED_PREFIX): New macro.
* src/conf/domain_conf.c (virDomainNetDefParseXML): Use it.
* src/uml/uml_conf.c (umlConnectTapDevice): Likewise.
* src/qemu/qemu_command.c (qemuNetworkIfaceConnect): Likewise.
Suggested by Laine Stump.
2011-07-29 16:08:54 -06:00
Eric Blake
1c93fbbbe7 build: support warnings on RHEL 5
Without this, a configure built by autoconf 2.59 was broken when
trying to detect which compiler warning flags were supported.

* .gnulib: Update to latest, for warnings.m4 fix.
* bootstrap.conf: Add fclose explicitly, to match recent gnulib
implicit dependency changes.
* src/qemu/qemu_conf.c (includes): Drop unused include.
* src/uml/uml_conf.c (include): Likewise.
Reported by Daniel P. Berrange.
2011-07-27 07:31:38 -06:00
Michal Privoznik
64ce43f82c destroy: Implement internal API for uml driver 2011-07-21 20:41:27 +02:00
Eric Blake
8e22e08935 build: rename files.h to virfile.h
In preparation for a future patch adding new virFile APIs.

* src/util/files.h, src/util/files.c: Move...
* src/util/virfile.h, src/util/virfile.c: ...here, and rename
functions to virFile prefix.  Macro names are intentionally
left alone.
* *.c: All '#include "files.h"' uses changed.
* src/Makefile.am (UTIL_SOURCES): Reflect rename.
* cfg.mk (exclude_file_name_regexp--sc_prohibit_close): Likewise.
* src/libvirt_private.syms: Likewise.
* docs/hacking.html.in: Likewise.
* HACKING: Regenerate.
2011-07-21 10:34:51 -06:00
Osier Yang
39babffb73 undefine: Implement undefineFlags for all other drivers 2011-07-20 11:08:21 +08:00
Eric Blake
461e0f1a2d flags: use common dumpxml flags check
The previous patches only cleaned up ATTRIBUTE_UNUSED flags cases;
auditing the drivers found other places where flags was being used
but not validated.  In particular, domainGetXMLDesc had issues with
clients accepting a different set of flags than the common
virDomainDefFormat helper function.

* src/conf/domain_conf.c (virDomainDefFormat): Add common flag check.
* src/uml/uml_driver.c (umlDomainAttachDeviceFlags)
(umlDomainDetachDeviceFlags): Reject unknown
flags.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc)
(vboxDomainAttachDeviceFlags)
(vboxDomainDetachDeviceFlags): Likewise.
* src/qemu/qemu_driver.c (qemudDomainMemoryPeek): Likewise.
(qemuDomainGetXMLDesc): Document common flag handling.
* src/libxl/libxl_driver.c (libxlDomainGetXMLDesc): Likewise.
* src/lxc/lxc_driver.c (lxcDomainGetXMLDesc): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetXMLDesc): Likewise.
* src/phyp/phyp_driver.c (phypDomainGetXMLDesc): Likewise.
* src/test/test_driver.c (testDomainGetXMLDesc): Likewise.
* src/vmware/vmware_driver.c (vmwareDomainGetXMLDesc): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDomainGetXMLDesc): Likewise.
2011-07-15 12:22:20 -06:00
Daniel P. Berrange
cf81318cb7 Add domain events support to UML driver
* src/uml_conf.h: Add queue for dispatch of domain events
* src/uml_driver.c: Trigger domain events upon important lifecycle transitions
2011-07-15 14:13:20 +01:00
Eric Blake
ff98359d51 build: don't hand-roll cloexec code
No need to repeat common code.

* bootstrap.conf (gnulib_modules): Import calloc-posix.
* src/util/bridge.c (brInit): Use virSetCloseExec.
(brSetInterfaceUp): Adjust flags name.
* src/uml/uml_driver.c (umlSetCloseExec): Delete.
(umlStartVMDaemon): Use util version instead.
2011-07-13 17:44:08 -06:00
Eric Blake
2bcad36889 uml: reject unknown flags
* src/uml/uml_driver.c (umlOpen, umlDomainGetXMLDesc)
(umlDomainBlockPeek): Reject unknown flags.
2011-07-13 15:10:42 -06:00
Daniel P. Berrange
65d68f62f1 Add missing cleanup for transient guests in UML driver
The UML inotify handler would kill off guests when certain
conditions arise, but it forgot to remove transient guests
from the list of domains

* src/uml/uml_driver.c: Cleanup transient guests
2011-07-12 17:05:30 +01:00
Daniel P. Berrange
f0c7103db5 Add auditing to the UML driver
* src/uml/uml_driver.c: Add audit hooks
2011-07-12 17:05:30 +01:00
Matthias Bolte
aa14709a47 Add domain type checking
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.

Add a check for the expected domain types to the virDomainDefParse*
functions.
2011-07-11 19:38:51 +02:00
Eric Blake
1740c38116 drivers: prefer unsigned int for flags
Now that the public APIs always use unsigned flags, the internal
driver callbacks might as well do likewise.

* src/driver.h (vrDrvOpen, virDrvDomainCoreDump)
(virDrvDomainGetXMLDesc, virDrvNetworkGetXMLDesc)
(virDrvNWFilterGetXMLDesc): Update type.
* src/remote/remote_protocol.x (remote_open_args)
(remote_domain_core_dump_args, remote_domain_get_xml_desc_args)
(remote_network_get_xml_desc_args)
(remote_nwfilter_get_xml_desc_args): Likewise.
* src/test/test_driver.c: Update clients.
* src/remote/remote_driver.c: Likewise.
* src/xen/xen_hypervisor.c: Likewise.
* src/xen/xen_hypervisor.h: Likewise.
* src/xen/xen_driver.c: Likewise.
* src/xen/xend_internal.c: Likewise.
* src/xen/xend_internal.h: Likewise.
* src/xen/xm_internal.c: Likewise.
* src/xen/xm_internal.h: Likewise.
* src/xen/xs_internal.c: Likewise.
* src/xen/xs_internal.h: Likewise.
* src/xen/xen_inotify.c: Likewise.
* src/xen/xen_inotify.h: Likewise.
* src/phyp/phyp_driver.c: Likewise.
* src/openvz/openvz_driver.c: Likewise.
* src/vmware/vmware_driver.c: Likewise.
* src/vbox/vbox_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xenapi/xenapi_driver.c: Likewise.
* src/esx/esx_driver.c: Likewise.
* src/esx/esx_interface_driver.c: Likewise.
* src/esx/esx_network_driver.c: Likewise.
* src/esx/esx_storage_driver.c: Likewise.
* src/esx/esx_device_monitor.c: Likewise.
* src/esx/esx_secret_driver.c: Likewise.
* src/esx/esx_nwfilter_driver.c: Likewise.
* src/interface/netcf_driver.c: Likewise.
* src/nwfilter/nwfilter_driver.c: Likewise.
* src/libxl/libxl_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/secret/secret_driver.c: Likewise.
* src/storage/storage_driver.c: Likewise.
* src/node_device/node_device_hal.c: Likewise.
* src/node_device/node_device_udev.c: Likewise.
* src/remote_protocol-structs: Likewise.
2011-07-07 14:15:37 -06:00
Matthias Bolte
e123e1ee6b Fix return value semantic of virFileMakePath
Some callers expected virFileMakePath to set errno, some expected
it to return an errno value. Unify this to return 0 on success and
-1 on error. Set errno to report detailed error information.

Also optimize virFileMakePath if stat fails with an errno different
from ENOENT.
2011-07-06 09:27:06 +02:00
Eric Blake
8ce1afff88 util: choose whether to require micro in version strings
To avoid regressions, we let callers specify whether to require a
minor and micro version.  Callers that were parsing uname() output
benefit from defaulting to 0, whereas callers that were parsing
version strings from other sources should not change in behavior.

* src/util/util.c (virParseVersionString): Allow caller to choose
whether to fail if minor or micro is missing.
* src/util/util.h (virParseVersionString): Update signature.
* src/esx/esx_driver.c (esxGetVersion): Update callers.
* src/lxc/lxc_driver.c (lxcVersion): Likewise.
* src/openvz/openvz_conf.c (openvzExtractVersionInfo): Likewise.
* src/uml/uml_driver.c (umlGetVersion): Likewise.
* src/vbox/vbox_MSCOMGlue.c (vboxLookupVersionInRegistry):
Likewise.
* src/vbox/vbox_tmpl.c (vboxExtractVersion): Likewise.
* src/vmware/vmware_conf.c (vmwareExtractVersion): Likewise.
* src/xenapi/xenapi_driver.c (xenapiGetVersion): Likewise.
Reported by Matthias Bolte.
2011-07-01 11:22:11 -06:00
Cole Robinson
6094ad7bd7 Promote virEvent*Handle/Timeout to public API
Since we virEventRegisterDefaultImpl is now a public API, callers need
a way to invoke the default registered Handle and Timeout functions. We
already have general functions for these internally, so promote
them to the public API.

v2:
    Actually add APIs to libvirt.h
2011-06-21 10:08:47 -04:00
Minoru Usui
af35cece3b virNodeGetMemoryStats: Implement linux support
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
2011-06-14 16:54:01 -06:00
Minoru Usui
ce76e85350 virNodeGetCPUStats: Implement linux support
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
2011-06-14 15:57:26 -06:00
Hu Tao
fbd7820b2c Deprecate several CURRENT/LIVE/CONFIG enums
This patch deprecates following enums:

VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG

VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG

VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG

And modify internal codes to use virDomainModificationImpact.
2011-06-13 14:17:16 -06:00
Heath Petersen
39b59dbdb4 uml: correct command line networking parameters
I have been finding that some UML command line networking parameters are
being generated incorrectly.

For more information, see
https://bugzilla.redhat.com/show_bug.cgi?id=706295 .
2011-06-02 13:52:26 -06:00
Daniel P. Berrange
9b1ae97fdc Add many version number annotations to drivers
Add many version number annotations to the internal driver
tables, to allow hvsupport.html to display more accurate
information
2011-05-16 14:20:48 +01:00
Daniel P. Berrange
879d409e9e Convert all driver struct intializers to C99 style
Change all the driver struct initializers to use the
C99 style, leaving out unused fields. This will make
it possible to add new APIs without changing every
driver. eg change:

    qemudDomainResume, /* domainResume */
    qemudDomainShutdown, /* domainShutdown */
    NULL, /* domainReboot */
    qemudDomainDestroy, /* domainDestroy */

to

    .domainResume = qemudDomainResume,
    .domainShutdown = qemudDomainShutdown,
    .domainDestroy = qemudDomainDestroy,

And get rid of any existing C99 style initializersr which
set NULL, eg change

     .listPools          = vboxStorageListPools,
     .numOfDefinedPools  = NULL,
     .listDefinedPools   = NULL,
     .findPoolSources    = NULL,
     .poolLookupByName   = vboxStoragePoolLookupByName,

to

     .listPools          = vboxStorageListPools,
     .poolLookupByName   = vboxStoragePoolLookupByName,
2011-05-16 14:20:43 +01:00
Daniel P. Berrange
360df0199e Tweak driver naming for consistency with public API
Fix some driver names:

  s/virDrvCPUCompare/virDrvCompareCPU/
  s/virDrvCPUBaseline/virDrvBaselineCPU/
  s/virDrvQemuDomainMonitorCommand/virDrvDomainQemuMonitorCommand/
  s/virDrvSecretNumOfSecrets/virDrvNumOfSecrets/
  s/virDrvSecretListSecrets/virDrvListSecrets/

And some driver struct field names:

  s/getFreeMemory/nodeGetFreeMemory/
2011-05-16 14:20:35 +01:00
Jiri Denemark
b046c55d40 Implement domain state reason
Only in drivers which use virDomainObj, drivers that query hypervisor
for domain status need to be updated separately in case their hypervisor
supports this functionality.

The reason is also saved into domain state XML so if a domain is not
running (i.e., no state XML exists) the reason will be lost by libvirtd
restart. I think this is an acceptable limitation.
2011-05-16 13:36:08 +02:00
Jiri Denemark
26d94012f6 Implement basic virDomainGetState in all drivers
Reason is currently always set to 0 (i.e., *_UNKNOWN).
2011-05-16 11:33:53 +02:00
Jiri Denemark
6feb1341e5 Internal driver API for virDomainGetState 2011-05-16 10:04:18 +02:00
Michal Privoznik
6a1f5f568f virFDStream: Add option for delete file after it's opening
This is needed if we want to transfer a temporary file. If the
transfer is done with iohelper, we might run into a race condition,
where we unlink() file before iohelper is executed.

* src/fdstream.c, src/fdstream.h,
  src/util/iohelper.c: Add new option
* src/lxc/lxc_driver.c, src/qemu/qemu_driver.c,
  src/storage/storage_driver.c, src/uml/uml_driver.c,
  src/xen/xen_driver.c: Expand existing function calls
2011-05-13 12:44:49 +02:00
Michal Privoznik
3c38664339 screenshot: Defining the internal API
* src/driver.h: Stub code for new API
* src/esx/esx_driver.c, src/libxl/libxl_driver.c,
  src/lxc/lxc_driver.c, src/openvz/openvz_driver.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  rc/remote/remote_driver.c, rc/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/vmware/vmware_driver.c, src/xen/xen_driver.c,
  src/xen/xen_driver.h, src/xen/xen_hypervisor.c,
  src/xen/xen_inotify.c, src/xen/xend_internal.c,
  src/xen/xm_internal.c, src/xen/xs_internal.c,
  src/xenapi/xenapi_driver.c: Add dummy entries in driver
  table for new APIs
2011-05-13 12:35:58 +02:00
Lai Jiangshan
b65f37a4a1 libvirt,logging: cleanup VIR_XXX0()
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.

How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.

example: origin				after CPP
	high_level_api("%d", a_int)	low_level_api("%d", a_int)
	high_level_api("a  string")	low_level_api("a  string")

About 400 conversions.

8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
  (for security) 6 conversions

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2011-05-11 12:41:14 -06:00
Matthias Bolte
9817604afc Rename internal DumpXML functions to GetXMLDesc
This matches the public API and helps to get rid of some special
case code in the remote generator.

Rename driver API functions and XDR protocol structs.

No functional change included outside of the remote generator.
2011-05-10 20:32:41 +02:00
Lai Jiangshan
b19bd85e15 inject-nmi: Defining the internal API 2011-05-10 11:40:51 -06:00
Eric Blake
68ea80cfdd maint: rename virBufferVSprintf to virBufferAsprintf
We already have virAsprintf, so picking a similar name helps for
seeing a similar purpose.  Furthermore, the prefix V before printf
generally implies 'va_list', even though this variant was '...', and
the old name got in the way of adding a new va_list version.

global rename performed with:

$ git grep -l virBufferVSprintf \
  | xargs -L1 sed -i 's/virBufferVSprintf/virBufferAsprintf/g'

then revert the changes in ChangeLog-old.
2011-05-05 13:47:40 -06:00
Matthias Bolte
60d769a13a Remove virConnectPtr from virRaiseErrorFull
And from all related macros and functions.
2011-04-17 07:22:23 +02:00
Matthias Bolte
3ac2a6f1b5 uml: Remove PATH_MAX sized stack allocation from /proc parsing code 2011-04-05 09:13:29 +02:00
Daniel P. Berrange
e886237af5 Enhance the streams helper to support plain file I/O
The O_NONBLOCK flag doesn't work as desired on plain files
or block devices. Introduce an I/O helper program that does
the blocking I/O operations, communicating over a pipe that
can support O_NONBLOCK

* src/fdstream.c, src/fdstream.h: Add non-blocking I/O
  on plain files/block devices
* src/Makefile.am, src/util/iohelper.c: I/O helper program
* src/qemu/qemu_driver.c, src/lxc/lxc_driver.c,
  src/uml/uml_driver.c, src/xen/xen_driver.c: Update for
  streams API change
2011-03-29 12:17:28 +01:00
Eric Blake
391c397e48 maint: prohibit access(,X_OK)
This simplifies several callers that were repeating checks already
guaranteed by util.c, and makes other callers more robust to now
reject directories.  remote_driver.c was over-strict - access(,R_OK)
is only needed to execute a script file; a binary only needs
access(,X_OK) (besides, it's unusual to see a file with x but not
r permissions, whether script or binary).

* cfg.mk (sc_prohibit_access_xok): New syntax-check rule.
(exclude_file_name_regexp--sc_prohibit_access_xok): Exempt one use.
* src/network/bridge_driver.c (networkStartRadvd): Fix offenders.
* src/qemu/qemu_capabilities.c (qemuCapsProbeMachineTypes)
(qemuCapsInitGuest, qemuCapsInit, qemuCapsExtractVersionInfo):
Likewise.
* src/remote/remote_driver.c (remoteFindDaemonPath): Likewise.
* src/uml/uml_driver.c (umlStartVMDaemon): Likewise.
* src/util/hooks.c (virHookCheck): Likewise.
2011-03-24 15:18:44 -06:00
Daniel P. Berrange
cb4aba9b6a Add public API for setting migration speed on the fly
It is possible to set a migration speed limit when starting
migration. This new API allows the speed limit to be changed
on the fly to adjust to changing conditions

* src/driver.h, src/libvirt.c, src/libvirt_public.syms,
  include/libvirt/libvirt.h.in: Add virDomainMigrateSetMaxSpeed
* src/esx/esx_driver.c, src/lxc/lxc_driver.c,
  src/opennebula/one_driver.c, src/openvz/openvz_driver.c,
  src/phyp/phyp_driver.c, src/qemu/qemu_driver.c,
  src/remote/remote_driver.c, src/test/test_driver.c,
  src/uml/uml_driver.c, src/vbox/vbox_tmpl.c,
  src/vmware/vmware_driver.c, src/xen/xen_driver.c,
  src/libxl/libxl_driver.c: Stub new API
2011-03-22 15:53:08 +00:00
Gui Jianfeng
d55aa8694e libvirt: implements virDomain{Get,Set}BlkioParameters
Implements virDomainSetBlkioParameters and virDomainGetBlkioParameters and initialization

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
2011-03-10 17:53:33 -07:00
Taku Izumi
e8340a8b79 setmem: introduce a new libvirt API (virDomainSetMemoryFlags)
This patch introduces a new libvirt API (virDomainSetMemoryFlags) and
a flag (virDomainMemoryModFlags).

Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
2011-03-10 15:02:58 -07:00
Daniel P. Berrange
16ba2aafc4 Allow hash tables to use generic pointers as keys
Relax the restriction that the hash table key must be a string
by allowing an arbitrary hash code generator + comparison func
to be provided

* util/hash.c, util/hash.h: Allow any pointer as a key
* internal.h: Include stdbool.h as standard.
* conf/domain_conf.c, conf/domain_conf.c,
  conf/nwfilter_params.c, nwfilter/nwfilter_gentech_driver.c,
  nwfilter/nwfilter_gentech_driver.h, nwfilter/nwfilter_learnipaddr.c,
  qemu/qemu_command.c, qemu/qemu_driver.c,
  qemu/qemu_process.c, uml/uml_driver.c,
  xen/xm_internal.c: s/char */void */ in hash callbacks
2011-02-25 13:00:54 +00:00
Laine Stump
13ae7a02b3 Allow brAddTap to create a tap device that is down
An upcoming patch has a use for a tap device to be created that
doesn't need to be actually put into the "up" state, and keeping it
"down" keeps the output of ifconfig from being unnecessarily cluttered
(ifconfig won't show down interfaces unless you add "-a").

bridge.[ch]: add "up" as an arg to brAddTap()
uml_conf.c, qemu_command.c: add "up" (set to "true") to brAddTap() call.
2011-02-17 13:36:22 -05:00
Eric Blake
dec13a5a15 sysinfo: define internal driver API
* src/driver.h (virDrvGetSysinfo): New typedef.
(_virDriver): New callback member.
* src/esx/esx_driver.c (esxDriver): Add stub for driver.
* src/lxc/lxc_driver.c (lxcDriver): Likewise.
* src/opennebula/one_driver.c (oneDriver): Likewise.
* src/openvz/openvz_driver.c (openvzDriver): Likewise.
* src/phyp/phyp_driver.c (phypDriver): Likewise.
* src/qemu/qemu_driver.c (qemuDriver): Likewise.
* src/remote/remote_driver.c (remote_driver): Likewise.
* src/test/test_driver.c (testDriver): Likewise.
* src/uml/uml_driver.c (umlDriver): Likewise.
* src/vbox/vbox_tmpl.c (Driver): Likewise.
* src/vmware/vmware_driver.c (vmwareDriver): Likewise.
* src/xen/xen_driver.c (xenUnifiedDriver): Likewise.
* src/xenapi/xenapi_driver.c (xenapiDriver): Likewise.
2011-02-08 19:25:30 -07:00