The existing QEMU and vbox URI path validation consider
that a privileged user can use both a "/system" and a
"/session" URI. This differs from all the other drivers
that forbids the root user to use "/session" URI.
Let's update virConnectValidateURIPath() to handle these
cases as exceptions, using the already existent 'entityName'
value to handle "QEMU" and "vbox" differently. This allows
us to use the validateURI function in these cases without
changing the existing behavior of other drivers.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The code to validate the URI path is repeated across several
files. This patch creates a common validation code to be
used across all of them.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Suggested-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A virDomainNetDef object in a domain's nets array might contain a
virDomainHostdevDef, and when this is the case, the domain's hostdevs
array will also have a pointer to this embedded hostdev (this is done
so that internal functions that need to perform some operation on all
hostdevs won't leave out the type='hostdev' network interfaces).
When a network device was updated with virDomainUpdateDeviceFlags(),
we were replacing the entry in the nets array (and free'ing the
original) but forgetting about the pointer in the hostdevs array
(which would then point to the now-free'd hostdev contained in the old
net object.) This often resulted in a libvirtd crash.
The solution is to add a function, virDomainNetUpdate(), called by
qemuDomainUpdateDeviceConfig(), that updates the hostdevs array
appropriately along with the nets array.
Resolves: https://bugzilla.redhat.com/1558934
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The private data for video definition is created in
virDomainVideoDefNew() and we attempt to free it in
virDomainVideoDefFree(). This seems to work, except
the free function calls clear function which zeroes
out the whole structure and thus virObjectUnref()
which is called on private data does nothing.
2,568 bytes in 107 blocks are definitely lost in loss record 207 of 213
at 0x4A35476: calloc (vg_replace_malloc.c:752)
by 0x50A6048: virAllocVar (viralloc.c:346)
by 0x513CC5A: virObjectNew (virobject.c:243)
by 0x4DC1DEE: qemuDomainVideoPrivateNew (qemu_domain.c:1337)
by 0x51A6BD6: virDomainVideoDefNew (domain_conf.c:2831)
by 0x51B9F06: virDomainVideoDefParseXML (domain_conf.c:15541)
by 0x51CB761: virDomainDefParseXML (domain_conf.c:21158)
by 0x51C5973: virDomainDefParseNode (domain_conf.c:21708)
by 0x51C583A: virDomainDefParse (domain_conf.c:21663)
by 0x51C58AE: virDomainDefParseFile (domain_conf.c:21688)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The open-coded version does not take much more space and additionally we
get rid of the hidden goto.
This also requires us to remove the 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The bulk stats functions are specific as they pass around the list into
many sub-functions and also a substantial amount of the entries uses
formatted names for indexing purposes. This makes them ideal to be
converted to the new virTypedParamList helpers.
Unfortunately given how the functions are used this requires a big-bang
rewrite of all of the calls to add entries to the parameter list.
Given that a substantial simplification is achieved as well as a pretty
significant change to the original code is required some macros which
were used only sporadically were replaced by inline calls rather than
tweaking the macros first and deleting them later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use QEMU_ADD_BLOCK_PARAM_ULL instead since all parameters are now
unsigned.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
None of the fields actually return negative values. The internal
implementation of BlockAcctStats struct in qemu uses uint64_t and the
last place using -1 in libvirt was in the HMP monitor code which was
deleted.
Change the internal type to unsigned long long and ensure that all
public conversions don't overflow.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a new set of helpers including a new data structure which
simplifies keeping and construction of lists of typed parameters.
The use of VIR_RESIZE_N in the virTypedParamsAdd API has performance
benefits but requires passing around 3 arguments. Use of them lead to a
set of macros with embedded jumps used in the qemu statistics code.
This patch introduces 'virTypedParamList' type which aggregates the
necessary list-keeping variables and also a new set of functions to add
new typed parameters to a list.
These new helpers use printf-like format string and arguments to format
the argument name as the stats code often uses indexed typed parameters.
The accessor function then allows extracting the typed parameter list in
the same format as virTypedParamsAdd* functions would do.
One additional benefit is also that the list function can easily be used
with VIR_AUTOPTR.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some code paths already pass in pointers to strings which should be
added directly as the value of the typed parameter. To allow more
universal use of virTypedParameterAssignValue add a flag which allows to
copy the value in place.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is only used as a helper in virTypedParamsAddFromString.
Make it static and move it to virtypedparam-public.c.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function is not exported in the public API thus the error
dispatching is not required.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some of the typed parameter APIs are exported publicly, but the
implementation was intermixed with private functions. Introduce
virtypedparam-public.c, move all public API functions there and purge
the comments stating that some functions are public.
This will decrease the likelihood of messing up the expectations as well
as it will become more clear which of them are actually public.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Turns out, block mirror is not the only job a disk can have. It
can also do commits of one layer into the other. Or possibly some
other tricks too. Problem is that while we set seclabels on given
layers of backing chain when the job is starting (via
qemuDomainStorageSourceAccessAllow()) we don't restore them when
job finishes. This leaves XATTRs set and corresponding images
unusable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
In bc1e924cf0 we've introduced video driver name and whilst
doing so we've utilized VIR_ENUM_IMPL() macro. Then, in domain
XML parsing code the generated
virDomainVideoBackendTypeFromString() is called and its return
value is assigned directly to an unsigned int variable which is
wrong. Also, the video driver enum has 'default' value which is
not formatted into domain XML but is accepted during parsing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The check was copied from the snapshot code and makes even less sense
here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Semantically VIR_DOMAIN_START_AUTODESTROY doesn't really clash with
snapshot operations as the VM stays on the same host and thus bound to
the same connection. Saving the state also doesn't differ from modifying
the state of the VM which is allowed.
Remove the check as it doesn't make much sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Semantically we can't guarantee that we'll be able to destroy the VM on
the remote host, thus we can't allow remote migration. All other forms
of migration (e.g. saving to file) are okay though as they don't clash
with semantics of the flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Apart from migrating the VM to a remote host where we can't honour the
VIR_DOMAIN_START_AUTODESTROY flag properly, restricting APIs which just
modify the state of the VM does not make much sense.
Change the wording of the documentation for VIR_DOMAIN_START_AUTODESTROY
so that snapshots and saving to a file may be permitted as they
semantically don't clash with the flag itself. Otherwise we'd have to
forbid other APIs, such as virDomainDestroy as well.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
For each vhost-user GPUs,
- build a socket chardev, and pass the vhost-user socket to it
- build a vhost-user video device and associate it with the chardev
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Each vhost-user-gpu needs its own helper gpu process.
Start/stop them, and apply the emulator cgroup controller.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Call qemuExtVhostUserGPUPrepareDomain() to fill the domain with the
location of the vhost-user binary to start.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Similar to the qemu_tpm.c, add a unit with a few functions to
start/stop and setup the cgroup of the external vhost-user-gpu
process. See function documentation.
The vhost-user connection fd is set on qemuDomainVideoPrivate struct.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
See function documentation. Used in a following patch.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Add qemuVhostUserFetchConfigs() to discover vhost-user helpers.
qemuVhostUserFillDomainGPU() will find the first matching GPU helper
with the required capabilities and set the associated
vhost_user_binary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
vhost-user device doesn't have a virgl option, it is passed to the
vhost-user-gpu helper process instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Check qemu capability, and accept 3d acceleration. 3d acceleration
support is checked when looking for a suitable vhost-user helper.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
To support virtio VGA with vhost-user, vhost-user-vga device is necessary.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Those new devices are available since QEMU 4.1.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
