Commit Graph

910 Commits

Author SHA1 Message Date
Erik Skultety
15a37cdf88 maint: Remove not-so-much informative block commentaries
There were a bunch of commentary blocks that were literally useless in
terms of describing what the code following them does, since most of
them were documenting "the obvious" or it just wouldn't help at all.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2017-10-18 13:38:59 +02:00
Daniel P. Berrange
e371b3bf41 Use https:// links for most sites
This adds a rule to require https links for the libvirt, qemu
and kvm websites.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-10-16 10:22:34 +01:00
Erik Skultety
bc92770aba docs: Update --timeout description in libvirtd's man page
Since commit @ae2163f8, only active client connections or running
domains are allowed to inhibit daemon shutdown. The man page however
wasn't updated appropriately.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1325066

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2017-09-08 11:07:45 +02:00
Erik Skultety
4c248e938a maint: Fix incorrect parenthesis placement causing true/false assignment
There were a few places in our code where the following pattern in 'if'
condition occurred:

if ((foo = bar() < 0))
    do something;

This patch adjusts the conditions to the expected format:

if ((foo = bar()) < 0)
    do something;

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1488192

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
2017-09-05 11:27:12 +02:00
Erik Skultety
b988f794e3 daemon: logging: Fix --verbose option being ignored by the daemon
Commit 94c465d0 refactored the logging setup phase but introduced an
issue, where the daemon ignores verbose mode when there are no outputs
defined and the default must be used. The problem is that the default
output was determined too early, thus ignoring the potential '--verbose'
option taking effect. This patch postpones the creation of the default
output to the very last moment when nothing else can change. Since the
default output is only created during the init phase, it's safe to leave
the pointer as NULL for a while, but it will be set eventually, thus not
affecting runtime.
Patch also adjusts both the other daemons.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1442947

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2017-08-28 16:42:13 +02:00
Michal Privoznik
733359a6ff libvirtd.conf: Drop max_requests
Since its introduction in f61341173b it was never
implemented nor there are plans to implement it. Drop it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-08-16 08:59:28 +02:00
Ján Tomko
e9f3222705 introduce virConfReadString
Rewrite virConfReadMem to take a null-terminated string.
All the callers were calling strlen on it anyway.
2017-08-08 12:19:17 +02:00
Peter Krempa
5aec02dc37 make: Drop building without driver modules
Driver modules proved to be reliable for a long time. Since support for
not building modules complicates the code and makefiles drop it.

Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
2017-07-27 12:00:35 +02:00
John Ferlan
b913c8f453 daemon: Don't conditionally free @origErr in daemonStreamEvent
Commit id '0fe4aa149' added @origErr, but since it's assigned outside
the if condition, the free should be outside as well.

Found by Coverity
2017-07-20 10:08:27 -04:00
Michal Privoznik
0fe4aa149f fdstream: Report error from the I/O thread
Problem with our error reporting is that the error object is a
thread local variable. That means if there's an error reported
within the I/O thread it gets logged and everything, but later
when the event loop aborts the stream it doesn't see the original
error. So we are left with some generic error. We can do better
if we copy the error message between the threads.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2017-07-11 08:41:01 +02:00
Daniel P. Berrange
3e03d1bd7e Fix conditional check for DBus
The DBus conditional was renamed way back:

  commit da77f04ed5
  Author: Daniel P. Berrange <berrange@redhat.com>
  Date:   Thu Sep 20 15:05:39 2012 +0100

    Convert HAVE_DBUS to WITH_DBUS

but the shutdown inhibit code was not updated. Thus libvirt
was never inhibiting shutdown by a logged in user when VMs
are running.

Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-07-05 13:12:21 +01:00
Lily Zhu
0f0c0921e6 man: Fix documentation errors about the paths of the config files
The default conf files, for example libvirtd.conf, virtlockd.conf, and
virtlogd.conf, should be located under the directory "/etc/libvirt" when
root as root, rather than "/etc". When run as non-root, the configuration
files should be located under "$XDG_CONFIG_HOME/libvirt/", rather than
"XDG_CONFIG_HOME".

Signed-off-by: Lily Zhu <lizhu@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
2017-06-28 11:07:08 +02:00
Michal Privoznik
ba81c4ee4f daemonUnixSocketPaths: Unify exit paths
Right now, there is a lot of exit points from the function.
Depending on their position they need to copy the same free
calls. This goes against our style where we usually have just one
exit point from the function which also does the necessary free.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-06-13 15:06:34 +02:00
Yi Wang
2502a0fade daemon: fix memory leak in daemonUnixSocketPaths
@rundir, allocated by virGetUserRuntimeDirectory, is leaked in case
virFileMakePath fails.

Signed-off-by: Xi Xu <xu.xi8@zte.com.cn>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
2017-06-13 11:01:21 +02:00
Peter Krempa
ed914284ba daemon: Don't initialize SASL context if not necessary
SASL context would be initialized even if the corresponding TCP or TLS
sockets are not enabled.

fe772f24a6 attempted to fix the symptom by commenting out the settings,
but that did not fix the root cause. 3c647ee4bb later reverted those
changes so that the more secure algorithm is used.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1450095
2017-06-02 14:52:11 +02:00
Michal Privoznik
89a0e69cec daemonStreamHandleRead: Wire up seekable stream
Whenever client is able to receive some data from stream
daemonStreamHandleRead is called. But now the behaviour of this
function needs to be changed a bit. Previously it just read data
from underlying file (of chardev or whatever) and sent those
through the stream to client. This model will not work any longer
because it does not differentiate whether underlying file is in
data or hole section. Therefore, at the beginning of this
function add code that checks this situation and acts
accordingly.
So after the this, when wanting to send some data we always check
whether we are not in a hole and if so, skip it an inform client
about its size.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
Michal Privoznik
470aaa20d4 daemon: Implement VIR_NET_STREAM_HOLE handling
Basically, whenever the new type of stream packet arrives to the
daemon call this function that decodes it and calls
virStreamSendHole(). Otherwise a regular data stream packet has
arrived and therefore continue its processing.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
Michal Privoznik
79d16419c4 Introduce VIR_NET_STREAM_HOLE message type
This is a special type of stream packet, that is bidirectional
and contains information regarding how many bytes each side will
be skipping in the stream.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
Michal Privoznik
5f4f9d87a9 Add new flag to daemonCreateClientStream and virNetClientStreamNew
Add a new argument to daemonCreateClientStream in order to allow for
future expansion to mark that a specific stream can be used to skip
data, such as the case with sparsely populated files. The new flag will
be the eventual decision point between client/server to decide whether
both ends can support and want to use sparse streams.

A new bool 'allowSkip' is added to both _virNetClientStream and
daemonClientStream in order to perform the tracking.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
John Ferlan
fe8f1c8b86 remote: Fix possible use-after-free when sending event message
Based upon an idea and some research by Wang King <king.wang@huawei.com>
and xinhua.Cao <caoxinhua@huawei.com>.

Since we're assigning the 'client' to our callback event lookaside list,
it's imperative that we grab a reference to the object; otherwise, when
the object is unref'd during virNetServerProcessClients when it's determined
that the virNetServerClientIsClosed and the memory is free'd before perhaps
the object event state callbacks are run.  When a virObjectLock() is run,
before sending the message the following trace occurs;

    #0  0x00007fda223d66d8 in virClassIsDerivedFrom
        (klass=0xdeadbeef, parent=0x7fda24c81b40)
         at util/virobject.c:169
    #1  0x00007fda223d6a1e in virObjectIsClass
        (anyobj=anyobj@entry=0x7fd9e575b400, klass=<optimized out>)
         at util/virobject.c:365
    #2  0x00007fda223d6a44 in virObjectLock
        (anyobj=0x7fd9e575b400)
        at util/virobject.c:317
    #3  0x00007fda22507f71 in virNetServerClientSendMessage
        (client=client@entry=0x7fd9e575b400, msg=msg@entry=0x7fd9ec30de90)
        at rpc/virnetserverclient.c:1422
    #4  0x00007fda230d714d in remoteDispatchObjectEventSend
        (client=0x7fd9e575b400, program=0x7fda24c844e0, procnr=348,
         proc=0x7fda2310e5e0 <xdr_remote_domain_event_callback_tunable_msg>,
         data=0x7ffc3857fdb0)
        at remote.c:3803
    #5  0x00007fda230dd71b in remoteRelayDomainEventTunable
        (conn=<optimized out>, dom=0x7fda27cd7660, params=0x7fda27f3aae0,
         nparams=1,opaque=0x7fd9e6c99e00)
        at remote.c:1033
    #6  0x00007fda224484cb in virDomainEventDispatchDefaultFunc
        (conn=0x7fda27cd0120, event=0x7fda2736ea00, cb=0x7fda230dd610
         <remoteRelayDomainEventTunable>, cbopaque=0x7fd9e6c99e00)
        at conf/domain_event.c:1910
    #7  0x00007fda22446871 in virObjectEventStateDispatchCallbacks
        (callbacks=<optimized out>, callbacks=<optimized out>,
         event=0x7fda2736ea00,state=0x7fda24ca3960)
        at conf/object_event.c:722
    #8  virObjectEventStateQueueDispatch
        (callbacks=0x7fda24c65800, queue=0x7ffc3857fe90, state=0x7fda24ca3960)
        at conf/object_event.c:736
    #9  virObjectEventStateFlush (state=0x7fda24ca3960)
        at conf/object_event.c:814
    #10 virObjectEventTimer (timer=<optimized out>, opaque=0x7fda24ca3960)
        at conf/object_event.c:560
    #11 0x00007fda223ae8b9 in virEventPollDispatchTimeouts ()
        at util/vireventpoll.c:458
    #12 virEventPollRunOnce ()
        at util/vireventpoll.c:654
    #13 0x00007fda223ad1d2 in virEventRunDefaultImpl ()
        at util/virevent.c:314
    #14 0x00007fda225046cd in virNetDaemonRun (dmn=0x7fda24c775c0)
        at rpc/virnetdaemon.c:818
    #15 0x00007fda230d6351 in main (argc=<optimized out>, argv=<optimized out>)
        at libvirtd.c:1623

Signed-off-by: John Ferlan <jferlan@redhat.com>
2017-04-25 07:26:36 -04:00
John Ferlan
2033e8cc11 daemon: Rework remoteClientFreeFunc cleanup loops into C macro
Rather than 'n' repetitive code segments, let's create a single macro
which will make the code easier to read.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2017-04-25 07:26:36 -04:00
Wang King
0023cc039d daemon: Remove unnecessary goto error
Freeing the dst is unnecessary if the VIR_STRDUP fails, and therefore
we need to remove the error label as well.
2017-04-25 11:30:41 +02:00
Wang King
f69340472c daemon: Fix domain name leak in error path
Domain name is duplicated in make_nonnull_domain, but not freed when
virTypedParamsSerialize returns error.
2017-04-25 11:30:26 +02:00
Jim Fehlig
6b3fb86b39 Increase default task limit for libvirtd
libvirtd can spawn threads/tasks when creating new domains for
some hypervisors such as Xen's libxl driver, quickly reaching
the cgroups pids controller default TasksMax setting of 512. When
the limit is reached, attempting to create additional domains
results in an error from the cgroups pids controller, e.g.

kernel: [71282.213347] cgroup: fork rejected by pids controller in
/system.slice/libvirtd.service

Depending on domain type and configuration, anywhere from 4-7
threads/tasks may be created by libxl when starting a domain.
In order to support 4096 domains, similar to commit 27cd763500,
increase the TasksMax setting in libvirtd.service to
4096 * 8 = 32768 tasks.
2017-04-20 09:13:34 -06:00
Ján Tomko
e73889b631 Split out -Wframe-larger-than warning from WARN_CLFAGS
Introduce STRICT_FRAME_LIMIT_CFLAGS that will be used for
production code and RELAXED_FRAME_LIMIT_CFLAGS for tests.

Raising the limit for tests allows building them with clang
with optimizations disabled.
2017-04-06 12:29:35 +02:00
Michal Privoznik
5683b21309 virGetDomain: Set domain ID too
So far our code is full of the following pattern:

  dom = virGetDomain(conn, name, uuid)
  if (dom)
      dom->id = 42;

There is no reasong why it couldn't be just:

  dom = virGetDomain(conn, name, uuid, id);

After all, client domain representation consists of tuple (name,
uuid, id).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-04-03 08:35:57 +02:00
Peter Krempa
085e794a86 lib: Introduce event for tracking disk backing file write threshold
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
2017-03-27 09:29:57 +02:00
Nitesh Konkar
9dba52efd2 perf: remote: Compare perf nparams against the correct constant
Currently 'virsh perf domain' errors out as the perf nparams is
incorrectly compared against REMOTE_DOMAIN_MEMORY_PARAMETERS_MAX
instead of REMOTE_DOMAIN_PERF_EVENTS_MAX.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2017-03-17 10:39:45 +01:00
Daniel P. Berrange
887450cbdf Sanity check explicit TLS file paths
When providing explicit x509 cert/key paths in libvirtd.conf,
the user must provide all three. If one or more is missed,
this leads to obscure errors at runtime when negotiating
the TLS session

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-03-16 10:49:58 +00:00
Daniel P. Berrange
27cd763500 Increase default file handle limits for daemons
Linux still defaults to a 1024 open file handle limit. This causes
scalability problems for libvirtd / virtlockd / virtlogd on large
hosts which might want > 1024 guest to be running. In fact if each
guest needs > 1 FD, we can't even get to 500 guests. This is not
good enough when we see machines with 100's of physical cores and
TBs of RAM.

In comparison to other memory requirements of libvirtd & related
daemons, the resource usage associated with open file handles
is essentially line noise. It is thus reasonable to increase the
limits unconditionally for all installs.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-03-16 10:48:09 +00:00
Daniel P. Berrange
3c647ee4bb Switch to GSSAPI (kerberos) instead of the insecure DIGEST-MD5
RFC 6331 documents a number of serious security weaknesses in
the SASL DIGEST-MD5 mechanism. As such, libvirtd should not
by using it as a default mechanism. GSSAPI is the only other
viable SASL mechanism that can provide secure session encryption
so enable that by defalt as the replacement.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-03-15 18:14:51 +00:00
Peter Krempa
633b7592d6 daemon: Refactor connection driver module loading
Pass the registration function name to virDriverLoadModule so that we
can later call specific functions if necessary (e.g. for testing
purposes). This gets rid of the rather ugly automatic name generator and
unifies the code to load/initialize the modules.

It's also clear which registration function gets called.
2017-02-21 09:24:33 +01:00
Boris Fiuczynski
4e036ab0c2 libvirtd: set openvswitch timeout value based on config data
Since a successful completion of the calls to openvswitch is expected
a longer timeout should be able to be chosen to account for loaded systems.
Therefore this patch provides the ability to specify the timeout value for
openvswitch calls in the libvirtd configuration file.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
2017-02-09 14:34:08 +01:00
Boris Fiuczynski
66583c0cf7 libvirtd: add openvitch timeout value
Provide the ability to specify a default timeout value for
successful completion of openvswitch calls in the libvirtd
configuration file.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-02-09 14:34:08 +01:00
Daniel P. Berrange
aed0850e39 virtlockd: fix systemd unit file dependancies
After deploying virtlogd by default we identified a number of
mistakes in the systemd unit file. virtlockd's relationship
to libvirtd is the same as virtlogd, so we must apply the
same unit file fixes to virtlockd

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-02-03 16:40:08 +00:00
Chen Hanxiao
f97a8a3284 THREADS.txt: fix typos
s/wakup/wakeup

Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
2017-01-25 09:18:49 +01:00
Daniel P. Berrange
42241208d9 secret: add support for value change events
Emit an event whenever a secret value changes

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-09 16:42:04 +00:00
Daniel P. Berrange
3b7bd6e540 remote: implement secret lifecycle event APIs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-09 15:53:49 +00:00
Daniel P. Berrange
c50070173d Add domain event for metadata changes
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-09 15:53:00 +00:00
John Ferlan
0c234889c4 storage: Introduce virStorageVolInfoFlags
https://bugzilla.redhat.com/show_bug.cgi?id=1332019

This function will essentially be a wrapper to virStorageVolInfo in order
to provide a mechanism to have the "physical" size of the volume returned
instead of the "allocation" size. This will provide similar capabilities to
the virDomainBlockInfo which can return both allocation and physical of a
domain storage volume.

NB: Since we're reusing the _virStorageVolInfo and not creating a new
_virStorageVolInfoFlags structure, we'll need to generate the rpc APIs
remoteStorageVolGetInfoFlags and remoteDispatchStorageVolGetInfoFlags
(although both were originally created from gendispatch.pl and then
just copied into daemon/remote.c and src/remote/remote_driver.c).

The new API will allow the usage of a VIR_STORAGE_VOL_GET_PHYSICAL flag
and will make the decision to return the physical or allocation value
into the allocation field.

In order to get that physical value, virStorageBackendUpdateVolTargetInfoFD
adds logic to fill in physical value matching logic in qemuStorageLimitsRefresh
used by virDomainBlockInfo when the domain is inactive.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-12-20 13:52:39 -05:00
Erik Skultety
1a38fbaa86 admin: Introduce virAdmConnectSetLoggingFilters
Enable libvirt users to modify logging filters of a daemon from outside.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-12-15 10:36:23 +01:00
Erik Skultety
ceeb85bd00 admin: Introduce virAdmConnectSetLoggingOutputs
Enable libvirt users to modify daemon's logging output settings from outside.
If either an empty string or NULL is passed, a default logging output will be
used the same way as it would be in case writing an empty string to the
libvirtd.conf

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-12-15 10:36:23 +01:00
Erik Skultety
cd484b534e admin: Introduce virAdmConnectGetLoggingFilters
Enable libvirt users to query logging filter settings.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-12-15 10:36:23 +01:00
Erik Skultety
fc7d1be79e admin: Introduce virAdmConnectGetLoggingOutputs
Enable libvirt users to query logging output settings.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-12-15 10:36:23 +01:00
Erik Skultety
94c465d0eb daemon: Hook up the virLog{Get,Set}DefaultOutput to the daemon's init routine
Now that virLog{Get,Set}DefaultOutput routines are introduced we can wire them
up to the daemon's logging initialization code. Also, change the order of
operations a bit so that we still strictly honor our precedence of settings:
cmdline > env > config now that outputs and filters are not appended anymore.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-12-15 10:36:23 +01:00
Erik Skultety
0d6cf32721 admin: Allow passing NULL to virLogSetOutputs
Along with an empty string, it should also be possible for users to pass
NULL to the public APIs which in turn would trigger a routine(future
work) responsible for defining an appropriate default logging output
given the current circumstances.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-12-15 10:36:23 +01:00
Yuri Chornoivan
ff8e021225 Fix minor typos 2016-12-02 09:25:13 +01:00
Michal Privoznik
fd81eb7c48 daemon: Install virt-guest-shutdown.target properly
When trying to install libvirtd from sources I've noticed the
following failure:

/usr/bin/install: cannot stat 'virt-guest-shutdown.target': No such file or directory
Makefile:2792: recipe for target 'install-init-systemd' failed
make[3]: *** [install-init-systemd] Error 1
make[3]: *** Waiting for unfinished jobs....

The problem is that while other files around that location in
Makefile are firstly generated into the builddir and only after
that installed, virt-guest-shutdown.target file is not generated
at all and should be installed from the srcdir.

This was introduced in 01079727.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-11-29 16:31:52 +01:00
Michal Privoznik
c2a5a4e7ea virstring: Unify string list function names
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:

virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix

We can do better:

virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-11-25 13:54:05 +01:00
Nikolay Shirokovskiy
01079727fe libvirtd: systemd: add special target for system shutdown
It is already discussed in "[RFC] daemon: remove hardcode dep on libvirt-guests" [1].

Mgmt can use means to save/restore domains on system shutdown/boot other than
libvirt-guests.service. Thus we need to specify appropriate ordering dependency between
libvirtd, domains and save/restore service. This patch takes approach suggested
in RFC and introduces a systemd target, so that ordering can be built next way:

libvirtd -> domain -> virt-guest-shutdown.target -> save-restore.service.

This way domains are decoupled from specific shutdown service via intermediate
target.

[1] https://www.redhat.com/archives/libvir-list/2016-September/msg01353.html
2016-11-23 11:13:53 +03:00