* qemud/remote.c: Send back the actual libvirt connection error
rather than formatting a generic error for security driver
methods
* src/libvirt.c: Fix virDomainGetSecurityLabel, and
virNodeGetSecurityModel to correctly set the error on
the virConnectPtr object, and raise a full error rather
than warning when not supported
* docs/bugs.html[.in]: general tickets are under the 'Virtualization
Tools' product category and Fedora specific tickets are under the
'Fedora' product category.
The 'pipe' character type wasn't documented.
TCP uses a <protocol> element, not <wire>
We weren't doing strict validation for protocol and source mode values.
When "git pull" (or any other operation) brings in a new version of the
gnulib git submodule, you must rerun the autogen.sh script. With this
change, "make" now fails and tells you to run ./autogen.sh, when needed.
* autogen.sh: Maintain a new file, .git-module-status, containing
the current submodule status. If it doesn't exist or its content
is different from what "git submodule status" prints, then run
./bootstrap
* .gitignore: Add .git-module-status
* cfg.mk: Diagnose out of date submodule and fail.
* README-hacking: Update not to mention bootstrap.
* Makefile.am (MAINTAINERCLEANFILES): Add .git-module-status,
so that "make maintainerclean" will remove it.
* src/domain_conf.c: replace open coded chr type parsing with
virDomainChrTypeFromString(), retaining the existing semantics
where unknown types are silently mapped to the "null" type and
"pty" is used if none is specified
We keep support for the pty based monitor so that we can re-connect
to VMs started by older versions of libvirtd.
* src/domain_conf.c: handle formatting and parsing unix monitors
* src/qemu_driver.c: add qemudOpenMonitorUnix(), remove the monitor
pty path searching from qemudFindCharDevicePTYs(), switch
qemudStartVMDaemon() and qemuDomainXMLToNative() to using a unix
monitor
* tests/qemuxml2argvtest.c: switch to using a unix monitor
* tests/qemuxml2argvdata/qemuxml2argv-*.args: update test data
There are no functional changes in this patch apart from adding the
monitor type to the state XML.
The patch mostly consists of switching to use virDomainChrDef every
where to describe the monitor.
* src/domain_conf.h: replace monitorpath with monitor_chr
* src/domain_conf.c: handle parsing the monitor type and initializing
monitor chr
* src/qemu_conf.[ch]: make qemudBuildCommandLine take a
virDomainChrDefPtr and use that to build the -monitor parameter
* src/qemu_driver.c: split pty specific and common code from
qemudOpenMonitor, have qemudStartVMDaemon() initialize monitor_chr
* tests/qemuxml2argvtest.c: update for qemudBuildCommandLine() change
* src/qemu_driver.c: vm->monitorpath is already initialized in the case
of re-connect, so move the initialization for the normal startup case
out of the common code
No longer maintain a version-controlled ChangeLog file, but do
continue to include a ChangeLog file in distribution tarball.
* Makefile.am (gen-ChangeLog): New rule.
(dist-hook): Depend on it.
(EXTRA_DIST): Add ChangeLog-old.
* bootstrap (modules): Add gitlog-to-changelog.
* ChangeLog: Remove file. Renamed to...
* ChangeLog-old: ...this. New file.
* autogen.sh: Touch ChangeLog, to ensure it exists. For automake.
* bootstrap (modules): Add gnumakefile and maintainer-makefile.
* GNUmakefile: Remove file, now provided by gnulib.
* Makefile.maint: Remove. Replaced by maint.mk from gnulib.
.gitignore: Add GNUmakefile and maint.mk.
* cfg.mk (prev_version_file): Disable this feature.
Setting this to /dev/null avoids an otherwise harmless diagnostic.
This makes it so we record (via a git submodule)
a snapshot of whatever version of gnulib we're using,
and none of gnulib sources are in the libvirt repository.
The result is that we have as much reproducibility as when
we version-controlled imported copies of the gnulib sources,
but without the hassle of the manual process we used when
syncing with upstream.
Note that when you clone libvirt, you get only the libvirt
repository, but when you first run ./bootstrap, it clones
gnulib (at the SHA1 recorded via the submodule), creating
the .gnulib/ hierarchy. Then, the bootstrap script runs
gnulib-tool to populate gnulib/ with the files that make
up the selected modules.
Put the following in your ~/.gitconfig file.
[alias]
syncsub = submodule foreach git pull origin master
The update procedure is simple:
git syncsub
...build & test...
git commit -m 'gnulib: sync submodule to latest' .gnulib
* .gitmodules: New file.
* .gnulib: Initialize.
* bootstrap: Set up to use the new submodule.
Stop using --no-vc-files.
Don't remove .gitignore files.
Don't use or create .cvsignore.
Diagnose an invalid --gnulib-srcdir=DIR argument.
* build-aux/vc-list-files: Delete file, now pulled from gnulib.
* build-aux/useless-if-before-free: Likewise.
* po/POTFILES.in: Remove gnulib/lib/gai_strerror.c, since
it no longer contains translatable strings.
* gnulib/*: Remove gnulib/ hierarchy.
Since Makefile.maint will soon come from gnulib's maint.mk,
sync Makefile.maint to have the same contents (modulo minor
things). In syncing it, we have to remove some libvirt-specific
rules. Since we want to keep them (of course), put those in cfg.mk.
* Makefile.maint: Merge from gnulib's maint.mk.
* cfg.mk (sc_avoid_write): New rule. From Makefile.cfg.
(sc_prohibit_strcmp_and_strncmp): Likewise, and rename.
(sc_prohibit_asprintf, sc_prohibit_VIR_ERR_NO_MEMORY): Likewise.
(sc_prohibit_nonreentrant): Likewise.
(sc_prohibit_ctype_h): Likewise.
(sc_TAB_in_indentation, sc_avoid_ctype_macros): Likewise.
(sc_prohibit_virBufferAdd_with_string_literal): Likewise.
(sc_prohibit_gethostby): Likewise.
(sc_libvirt_unmarked_diagnostics): Likewise. Also, rename the
rule, inserting "_libvirt", since this rule is a specialization of
the one in gnulib.
* GNUmakefile: Include cfg.mk, not Makefile.cfg
* .x-sc_prohibit_strcmp_and_strncmp: New file.
* Makefile.am (EXTRA_DIST): Add .x-sc_prohibit_strcmp_and_strncmp
Don't use mylibtool, (subsumed by automake's silent rules)
Its use was causing a non-srcdir build to fail.
* Makefile.am (EXTRA_DIST): Remove mylibtool.
* configure.in: Don't use mylibtool.
* configure.in: Use AM_SILENT_RULES([yes]),
but only if that m4 macro is defined.
Thus, it works even on systems that lack automake-1.11.
Daniel Berrange suggested adding the conditional, so that
we don't have a hard requirement on 1.11, e.g., for RHEL5.
It failed in a non-srcdir build because those 5 sample output
files were not included in the distribution tarball. Include them.
* tests/Makefile.am (qemuhelpdata, EXTRA_DIST): Include these:
kvm-74, kvm-86, qemu-0.10.5, qemu-0.9.1, qemu-kvm-0.10.5.
* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga
when starting guests if video card is present
* tests/qemuhelptest.c: Change to use constants instead
of hardcoded hex numbers, and add VGA support
* tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml,
tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video>
element for testing graphics adapter
* tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag
* tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests
* docs/schemas/domain.rng: Define <video> element schema
* src/domain_conf.c, src/domain_conf.h, src/libvirt_private.syms:
Add parsing and formatting for <video> element
* src/network_driver.c src/node_device.c src/storage_driver.c:
many places in the code reported 'No xxx with matching name" after
a Lookup error without reporting the name used by the failed lookup
* docs/examples/python/domstart.py python/tests/create.py:
The two example were broken as they needed full-access connection
but only opened read-only connections
Fixes startup of guest's with sourceless cdrom devices.
Patch from Cole Robinson originally posted here:
https://bugzilla.redhat.com/499569
but never sent upstream.
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
As pointed out by Tim Waugh here:
https://bugzilla.redhat.com/507555
We shouldn't bother trying to set the context of a file if it already
matches what we want.
(Fixed to use STREQ() and not use tabs, as pointed out by danpb)
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
This patch was posted ages ago here:
https://bugzilla.redhat.com/493692
But was never posted upstream AFAICT.
Patch from Dan Berrange
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
* docs/schemas/network.rng: fix the network schemas to match
new accepted elements, patch by Satoru SATOH
* src/network_conf.c: fix network driver to save the domain name
in XML if present, patch by Satoru SATOH
* AUTHORS: adding Satoru SATOH
Daniel
* docs/drvone.html.in docs/drvone.html docs/drivers.html.in
docs/hvsupport.html.in docs/sitemap.html.in docs/*: added
documentation for OpenNebula driver by Abel Miguez Rodriguez
and regenerated the docs
Daniel
* src/libvirt.c src/virterror.c: fix some missing comments in public
modules.
* docs/libvirt-api.xml docs/libvirt-refs.xml
docs/devhelp/libvirt-libvirt.html docs/html/libvirt-libvirt.html:
regenerated documentation
* po/*: updated the polish localization and regenerated
Daniel
* docs/logging.html[.in] qemud/libvirtd.conf qemud/qemud.c
src/logging.[ch]: cleanup the logging code and docs to remove
all references to log level 0, cleanup hardcoded values and add
a default VIR_LOG_DEFAULT value, patch by Amy Griffis
daniel
