Add small test case to demonstrate use of usb-net with user networking
backend.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This patch will allow usb-net devices to be automatically assigned a USB
address (and skip any attempt to assign a PCI one).
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Commit 2ecdf25929 was intended to
implement two things: reduce stack usage inside ACL helpers and
minimally initialize virDomainDef object to avoid passing garbage
inside validation framework. Though original commit has not
touched other ACL helpers.
This patch adds proper clauses to
remoteRelayNetworkEventCheckACL
remoteRelayStoragePoolEventCheckACL
remoteRelayNodeDeviceEventCheckACL
remoteRelaySecretEventCheckACL
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add DMI support for risc-v and mips. Attempt to read dmidecode and
fall back to old behavior if that fails.
The SMBIOS specification[1] officially supports both RISC-V and LoongArch.
Some mips-based Loongson-3 processors also have SMBIOS.
[1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.7.0.pdf
Signed-off-by: Brett Holman <brett.holman@canonical.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Implement display="on" and ramfb="on" for vfio PCI host devices in qemu.
This enables passthrough PCI devices for display just like we did for
mdevs.
Resolves: https://issues.redhat.com/browse/RHEL-28808
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We already allow the user to specify display="on" and ramfb="on" for
mdev host devices. But newer GPU models will no longer use the mdev
framework, so we should enable this same functionality for other
non-mdev passthrough PCI devices.
Resolves: https://issues.redhat.com/browse/RHEL-28808
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Right now, we display the message before actually attempting
to connect to the VM console. That operation, however, can
fail for a number of reasons: for example, is the VM doesn't
have a serial device, the output ends up looking like
$ virsh console cirros
Connected to domain 'cirros'
Escape character is ^] (Ctrl + ])
error: internal error: cannot find character device <null>
The initial message is misleading. Change things so that it's
only printed if we actually successfully connected to the VM
console.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reimplement the virsh-uriprecedence test case in virshtest. To do this
we need to add infrastructure to pass extra environment variables to the
tested virsh.
The user config files are shipped in repo rather than created in the
script.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test simply invokes libvirtd and expects it to fail. We can do that
directly in meson without the need for a wrapper script.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The self-test command for both virsh and virt-admin is self contained
and directly reports success, thus we don't actually need to run a shell
wrapper around it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case is a fairly simple invocation of pool-create-as which can
be done easily from 'virshtest'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test both situations (reading from non-regular file and reading a file
larger than (arbitrary) buffer size) via 'virshtest'.
To feed the pipe we need to create a thread that does it, but otherwise
it's fairly straightforward.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Invoke the majority of the command via DO_TEST_SCRIPT in 'virshtest'.
Some adaptation was needed to avoid printing of tables with volatile
data such as checkpoint creation time, which were converted to list
names-only.
To proprely test redefinition we store XMLs rather than taking them from
the defined checkpoints and use them separately to test redefinition of
checkpoint XMLs. This makes use of the 'cd' command in non-interactive
mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Invoke the majority of the command via DO_TEST_SCRIPT in 'virshtest'.
Some adaptation was needed to avoid printing of tables with volatile
data such as snapshot creation time, which were converted to list
names-only.
To proprely test redefinition we store XMLs rather than taking them from
the defined snapshots and use them separately to test redefinition of
snapshot XMLs. This makes use of the 'cd' command in non-interactive
mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For testing purposes it will come handy to change the directory from a
batch-mode script. Remove the check forbidding use of the 'cd' command
in batch mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Until now when '--name' was used the parent was not printed and the
option was ignored. One option would be to declare the options mutually
exclusive, but for testing it may come handy to print both the snapshot
name and parent. Adjust the code to print them tab-separated and adjust
the docs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'virsh-start' case simply tried to start an already running VM. This
can be easily tested together with the tests for undefining a VM.
For this test the test driver config with multiple VMs comes handy as we
need to test 3 situations when we undefine and stop the VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a simple virsh invocation which can be done in 'virshtest'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It's a simple test case invoking one virsh command thus it can be moved
to 'virshtest'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As all cases are negative we can test them all in one virsh run.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rather than using 'virsh define' for the tests use the XML (or idea what
the XML is testing) and use them as 'qemuxmlconftest' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adapt the 'tests/virsh-output-commands' file from 'virsh-output' test as
a source. Apart from expanding the bash function to each command, I've
also had to drop the negative tests for argument population, as a
command parsing error aborts the execution of the script right away
rather than just reporting the error.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the argument parsing tests excercising 'virsh event' options
from 'virsh-optparse' to 'virshtest'.
As the test invokes 'virsh event' with a timeout and thus waits for one
second pointlessly the patch also adds infrastructure to mark individual
cases as expensive and is skipped normally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the argument parsing tests excercising various numeric options
(except 'virsh event') from 'virsh-optparse' to 'virshtest'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the argument parsing tests excercising 'virsh snapshot-create-as'
from 'virsh-optparse' to 'virshtest'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the argument parsing tests excercising 'virsh setvcpus' from
'virsh-optparse' to 'virshtest'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all tests were converted, this is no longer needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adapt the tests to be invoked in one run. Note that multiple fake VMs
were used for the distinct tests so that they don't influence each
other.
This is the final coversion of tests to run in batch mode which halved
the runtime of 'virshtest' on my machine (1.11s vs 2.33s).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The query and update can be tested in one run and validated against
files rather than hardcoded strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All of the commands can be tested in one 'virsh' run in batch mode and
tested against a file rather than hardcoded strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add the basic list and info commands into a script and run it via
VIR_TEST_RUN_SCRIPT to simplify the code and save up on 'virsh'
instances exec'd for the test.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that the output is tested against files these are not needed any
more. The brief existence of both proved that the output is identical.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Managing output files is much simpler especially with
VIR_TEST_REGENERATE_OUTPUT compared to putting the expected string blobs
into the C source file.
For now the output is tested both against the hardcoded strings as well
as the output files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Embedding the expected output in a C source code makes it very hard to
extend tests. In order to be able to test the outputs against data in
files on disk we need better naming of the tests themselves.
Use virTestCounterNext/Reset with appropriate tags to give reasonable
names to the 'virsh echo' tests' and prepare the 'DO_TEST' macro for
wider use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Express what's possible via a "virsh script" rather than invoking
separate virsh for each one.
We need to keep a few for parity as the argument parser behaves
differently when processing argv-like input compared to a string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both argument passing and multiple command handling is already tested in
the 'multiple commands' cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Optimize invocation of the tests to share one 'virsh' binary as they
don't influence each other.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add support for reading a file and passing it to virsh in 'batch' mode
so that multiple commands can be easily tested with one invocation of
virsh.
To show how it's used adapt the alias handling tests to be invoked all
at once.
As in batch mode the arguments are read from a string and separated
inside virsh, one test is kept separate to be parsed in argv mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming patches will require that possibly multiple occurences of the
string to drop are present in the output string thus we need to adapt
testFilterLine to handle them.
Additionally we drop the unused return value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the test code so that if virsh fails both 'stdout' and 'stderr'
are captured and compared against the output and also the return value
is checked by appending it to the output.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify testCompareOutputLit to take a filename argument and compare it
against and populate the arguments.
For tests which don't use the 'data' from virTestRun, we'll expect to
pass the output filename, thus we also propagate it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Drop the last enum member VSH_OFLAG_NONE and remove the 'flags' variable
from vshCmdOptDef.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch the command parser from using the VSH_OFLAG_REQ_OPT flag
opting out from positional parsing of arguments to a combination of the
'positional' flags for truly positional arguments and
'unwanted_positional' preserving semantics for the existing arguments
where the parser did it due to bad design.
This patch retires VSH_OFLAG_REQ_OPT along with the infrastructure that
was needed to refactor all uses properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically the command parser in virsh parses/fills even optional
arguments with values as if they were positional unless opted out using
VSH_OFLAG_REQ_OPT. This creates unexpected situations when commands can
break in this unwanted semantics:
$ virsh snapshot-create-as --print-xml 1 2 3
<domainsnapshot>
<name>2</name>
<description>3</description>
</domainsnapshot>
To prevent any further addition annotate the rest of the arguments with
the 'unwanted_positional' flag, so that the parser can keep parsing them
as such but any further optional argument will not have this behaviour.
Certain arguments where it makes sense are annotated as 'positional' too
in this patch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically the command parser in virsh parses/fills even optional
arguments with values as if they were positional unless opted out using
VSH_OFLAG_REQ_OPT. This creates unexpected situations when commands can
break in this unwanted semantics:
$ virsh snapshot-create-as --print-xml 1 2 3
<domainsnapshot>
<name>2</name>
<description>3</description>
</domainsnapshot>
To prevent any further addition annotate the rest of the arguments with
the 'unwanted_positional' flag, so that the parser can keep parsing them
as such but any further optional argument will not have this behaviour.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Annotate arguments which can be unintentionally parsed positionally.
(See previous commits for explanation.)
All of these options were added in order thus we must declare all of
them as 'unwanted_positional'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
