This removes nearly all the per-file error reporting macros
from the code in src/util/. A few custom macros remain for the
case, where the file needs to report errors with a variety of
different codes or parameters
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virNetServerMDNSTimeoutNew method was casting a long long
to an int when reporting errors. This should just be using
%lld instead of %d, avoiding the need to cast
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virnetdevtap.c and viruri.c files had two error report
messages which were not annotated with _(...)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Nearly every source file does something like
#define VIR_FROM_THIS VIR_FROM_FOO
#define virFooReportErorr(code, ...) \
virReportErrorHelper(VIR_FROM_THIS, code, __FILE__, \
__FUNCTION__, __LINE__, \
__VA_ARGS__)
This creates needless duplication and inconsistent error
reporting function names in each file. It is trivial to
just have virterror_internal.h provide a virReportError
macro that is equivalent
* src/util/virterror_internal.h: Define virReportError(code, ...)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remote driver needs to make sure the driver lock is released before
entering client IO loop as that may block indefinitely in poll(). As a
direct consequence of not following this in stream APIs, tunneled
migration to a destination host which becomes non-responding may block
qemu driver. Luckily, if keepalive is turned for p2p migrations, both
remote and qemu drivers will get automagically unblocked after keepalive
timeout.
The previous commit (387117ad92) was incomplete leaving those
who does not use libpcap with uncompilable sources beacuse
of incomplete conversion of virNWFilterDHCPSnoopReq function.
Introduce new members in the virMacAddr 'class'
- virMacAddrSet: set virMacAddr from a virMacAddr
- virMacAddrSetRaw: setting virMacAddr from raw 6 byte MAC address buffer
- virMacAddrGetRaw: writing virMacAddr into raw 6 byte MAC address buffer
- virMacAddrCmp: comparing two virMacAddr
- virMacAddrCmpRaw: comparing a virMacAddr with a raw 6 byte MAC address buffer
then replace raw MAC addresses by replacing
- 'unsigned char *' with virMacAddrPtr
- 'unsigned char ... [VIR_MAC_BUFLEN]' with virMacAddr
and introduce usage of above functions where necessary.
Even though qemu-kvm binaries can be used in TCG mode, libvirt would
only detect them if /dev/kvm was available. Thus, one would need to make
a /usr/bin/qemu symlink to be able to use TCG mode with qemu-kvm in an
environment without KVM support.
And even though QEMU is able to make use of KVM, libvirt would not
advertise KVM support unless there was a qemu-kvm symlink available.
This patch fixes both issues.
If QEMU supports the BALLOON_EVENT QMP event, then we can
avoid invoking 'query-balloon' when returning XML or the
domain info.
* src/qemu/qemu_capabilities.c, src/qemu/qemu_capabilities.h:
Add QEMU_CAPS_BALLOON_EVENT
* src/qemu/qemu_driver.c: Skip query-balloon in
qemudDomainGetInfo and qemuDomainGetXMLDesc if we have
QEMU_CAPS_BALLOON_EVENT set
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Check
for BALLOON_EVENT at connect to monitor. Add callback
for balloon change notifications
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h:
Add handling of BALLOON_EVENT and impl 'query-events'
check
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When the guest changes its memory balloon applications may want
to know what the new value is, without having to periodically
poll on XML / domain info. Introduce a "balloon change" event
to let apps see this
* include/libvirt/libvirt.h.in: Define the
virConnectDomainEventBalloonChangeCallback callback
and VIR_DOMAIN_EVENT_ID_BALLOON_CHANGE constant
* python/libvirt-override-virConnect.py,
python/libvirt-override.c: Wire up helpers for new event
* daemon/remote.c: Helper for serializing balloon event
* examples/domain-events/events-c/event-test.c,
examples/domain-events/events-python/event-test.py: Add
example of balloon event usage
* src/conf/domain_event.c, src/conf/domain_event.h: Handling
of balloon events
* src/remote/remote_driver.c: Add handler of balloon events
* src/remote/remote_protocol.x: Define wire protocol for
balloon events
* src/remote_protocol-structs: Likewise.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When building with --disable-debug, VIR_DEBUG expands to a nop.
But parameters to VIR_DEBUG can be variables that are passed only
to VIR_DEBUG. In the case the building system complains about unused
variables.
When --direct is used when migrating a domain running on a hypervisor
that does not support direct migration (such as QEMU), the caller would
get the following error message:
this function is not supported by the connection driver:
virDomainMigrateToURI2
which is a complete nonsense since qemu driver implements
virDomainMigrateToURI2. This patch would emit a more sensible error in
this case:
Requested operation is not valid: direct migration is not supported
by the connection driver
Commit 32a9aac switched libvirt to use the XDG base directories
to locate most of its data/config. In particular, the per-user socket
for qemu:///session is now stored in the XDG runtime directory.
This directory is located by looking at the XDG_RUNTIME_DIR environment
variable, with a fallback to ~/.cache/libvirt if this variable is not
set.
When the daemon is autospawned because a client application wants
to use qemu:///session, the daemon is ran in a clean environment
which does not contain XDG_RUNTIME_DIR. It will create its socket
in ~/.cache/libvirt. If the client application has XDG_RUNTIME_DIR
set, it will not look for the socket in the fallback place, and will
fail to connect to the autospawned daemon.
This patch adds XDG_RUNTIME_DIR to the daemon environment before
auto-starting it. I've done this in virNetSocketForkDaemon rather
than in virCommandAddEnvPassCommon as I wasn't sure we want to pass
these variables to other commands libvirt spawns. XDG_CACHE_HOME
and XDG_CONFIG_HOME are also added to the daemon env as it makes use
of those as well.
When calling 'lvcreate' if specifying both the '-L' and
'--virtualsize' options, the latter will be treated as
the capacity and the former as the allocation. This can
be used to support sparse volume creation. In addition,
when listing volumes it is necessary to include the 'size'
field in lvs output, so that we can detect sparse volume
allocation correctly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To make it easier to dynamically change the command line ARGV,
switch all storage code over to use virCommandPtr APIs for
running programs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Fix the virStorageBackendFileSystemVolDelete method to not use
unlink() unconditionally. It must use rmdir() for volumes which
are directories. It should also raise an error if given a volume
which has the network/block type.
Per the typical use of libvirt is to fork the qemu process with
qemu:qemu. Setting the pool permission mode as 0700 by default
will prevent the guest start with permission reason.
Define macro for the default pool and vol permission modes
incidentally.
Since we are not yet using the virNetServerPtr object for running
the event loop, we can't use virNetServerQuit(). Instead set the
global 'quit' flag in libvirt_lxc
This patch changes the way data to fill the nodeinfo structure are
gathered. We've gathere the test data by iterating processors an sockets
separately from nodes. The reported data was based solely on information
about core id. Problems arise when eg cores in mulit-processor machines
don't have same id's on both processors or maybe one physical processor
contains more NUMA nodes.
This patch changes the approach how we detect processors and nodes. Now
we start at enumerating nodes and for each node processors, sockets and
threads are enumerated separately. This approach provides acurate data
that comply to docs about the nodeinfo structure. This also enables to
get rid of hacks: see commits 10d9038b74,
ac9dd4a676. (Those changes in nodeinfo.c
are efectively reverted by this patch).
This patch also changes output of one of the tests, as the processor
topology is now acquired more precisely.
The s390(x) architecture doesn't feature a PCI bus. For the purpose of
supporting virtio devices a virtual bus called virtio-s390 is used.
A new address type VIR_DOMAIN_DEVICE_ADDRESS_TYPE_VIRTIO_S390 is used to
distinguish the virtio devices on s390 from PCI-based virtio devices.
V3 Change: updated QEMU_CAPS_VIRTIO_S390 to fit upstream.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This is in preparation of the enablement of s390 guests with virtio devices.
The assignment of device addresses happens in different places, i.e. the
qemu driver and process modules as well as in the unit tests in slightly
different flavors. Currently, these are PPC spapr-vio and PCI
devices, virtio-s390 (not PCI based) will follow.
By optionally passing to qemuDomainAssignAddresses the domain
object and the capabilities it is now possible to call the function
from most of the places (except for hotplug) where address assignment
is done.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
This makes the driver fail with a clear error message in case of UUID
collisions (for example if somebody copied a container configuration
without updating the UUID) and also raises an error on other hash map
failures.
OpenVZ itself doesn't complain about duplicate UUIDs since this
parameter is only used by libvirt.
Commit 5e6ce1 moved down detection of the ACPI feature in
qemuParseCommandLine. However, when ACPI is detected, it clears
all feature flags in def->features to only set ACPI. This used to
be fine because this was the first place were def->features was set,
but after the move this is no longer necessarily true because this
block comes before the ACPI check:
if (strstr(def->emulator, "kvm")) {
def->virtType = VIR_DOMAIN_VIRT_KVM;
def->features |= (1 << VIR_DOMAIN_FEATURE_PAE);
}
Since def is allocated in qemuParseCommandLine using VIR_ALLOC, we
can always use |= when modifying def->features
The only useful translation of "%s" as a format string is "%s" (I
suppose you could claim "%1$s" is also valid, but why bother). So
it is not worth translating; fixing this exposes some instances
where we were failing to translate real error messages. This makes
the fix of commit 097da1ab more generic, as well as ensuring no
future regressions.
* cfg.mk (sc_prohibit_useless_translation): New rule.
* src/lxc/lxc_driver.c (lxcSetVcpuBWLive): Fix offender.
* src/openvz/openvz_conf.c (openvzReadFSConf): Likewise.
* src/qemu/qemu_cgroup.c (qemuSetupCgroupForVcpu): Likewise.
* src/qemu/qemu_driver.c (qemuSetVcpusBWLive): Likewise.
* src/xenapi/xenapi_utils.c (xenapiSessionErrorHandle): Likewise.
Instead of changing the existed virFileMakePath to accept mode
argument and modifying a pile of its uses, this patch introduces
virFileMakePathWithMode, and use it instead of mkdir() to create
the readline history dir.
Commit 122fa379de introduces option to
store more than one host entry in a storage pool source definition. That
commit causes a regression, where a check is added that only one host
entry should be present (that actualy is not present as the source
structure was just allocated and zeroed) instead of allocating memory
for the host entry.
As the storage pool sources are stored in a list of structs, the pointer
returned by virStoragePoolSourceListNewSource() shouldn't be freed as it
points in the middle of a memory block. This combined with a regression
that takes the error path every time on caused a double-free abort on
the src struct in question.
Previous commits added code to unmount the existing /proc,
/sys and /dev hierarchies on the root filesystem of the
container. This should only have been done if the container's
root filesystem was the same as the host's root. ie if
the root source is '/'. As it is, this causes LXC containersr
to fail to start if their root source is not '/'
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for introducing a full RPC protocol for
libvirt_lxc, switch over to using the virNetServer APIs
for the monitor connection
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
While it is not currently used elsewhere in libvirt, the code
for finding a free loop device & associating a file with it
is not LXC specific. Move it into the viffile.{c,h} file where
potentially shared code is more commonly kept.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the cgroup object into virLXCControllerPtr and rename
all the setup methods to include 'Cgroup' in their name
if appropriate
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the monitor FDs into the virLXCControllerPtr object
removing the need for the 'struct lxcMonitor' object
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virLXCControllerRun method is getting a little too large,
and about 50% of its code is related to setting up a /dev/pts
mount. Move the latter out into a dedicated method
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the security manager object into the virLXCControllerPtr
object. Also simplify the code creating it in the first place
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the list of loop device FDs into the virLXCControllerPtr
object and make sure that virLXCControllerStopInit will
close them all
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Turn 'struct lxc_console' into virLXCControllerConsolePtr and make it
a part of virLXCControllerPtr
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Keep a record of the init PID in the virLXCController object
and create a virLXCControllerStopInit method for killing this
process
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the veth device name state into the virLXCControllerPtr
object and stop passing it around. Also use size_t instead
of unsigned int for the array length parameters.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
