The capability represents that qemu accepts the configuration of the
HPET timer via -machine hpet=on/off rather than the
soon-to-be-deprecated '-no-hpet' option.
The capability is detected from 'query-command-line-options' which
recently added the 'hpet' option.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Introduce a new backend type 'external' for connecting to a swtpm daemon
not managed by libvirtd.
Mostly in one commit, thanks to -Wswitch and the way we generate
capabilities.
https://bugzilla.redhat.com/show_bug.cgi?id=2063723
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Although the qemuMigrationSrcPerformResume actually got called
indirectly via qemuMigrationSrcPerformNative and the recovery process
worked, wrong job phases were used for the "perform" phase, which could
cause issues when libvirt daemon crashed (or was otherwise restarted)
during post-copy recovery.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It will need to be called from a place above its current definition.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When qemuDomainObjReleaseAsyncJob is called when the current async job
is already released we emit quite useless warning which was implemented
to warn about releasing a job owned by another thread.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The function is called even if QEMU reports migration as
postcopy-paused, i.e., it's not migrating anymore. And while changing
the warning, we can drop the part about unattended migration to make the
warning shorter and consistent with qemuMigrationSrcPostcopyFailed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some cases when the internal state of disks can change
without qemu sending events about it (e.g. a disk can close
during reset). In case this happens, we should emit an event
about the modified disk.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1824722#c20
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a guest with <interface/> which has the target
device name set (i.e. not generated by us), it may happen that
the TAP device already exists. This then may lead to all sorts of
problems. For instance: for <interface type='network'/> the TAP
device is plugged into the network's bridge, but since the TAP
device is persistent it remains plugged there even after the
guest is shut off. We don't have a code that unplugs TAP devices
from the bridge because TAP devices we create are transient, i.e.
are removed automatically when QEMU closes their FD.
The only exception is <interface type='ethernet'/> with <target
managed='no'/> where we specifically want to let users use
pre-created TAP device and basically not touch it at all.
There's another reason for denying to use a pre-created TAP
devices: if we ever have bug in TAP name generation, we may
re-use a TAP device from another domain.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2144738
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Historically, QEMU took screenshots in PPM. While this might use
to be popular format, as of v7.1.0-rc0~125^2~6 it is possible to
take screenshots in PNG. This is more popular and renders almost
everywhere, which is not the case for PPM (for instance, modern
browsers do not render it).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'screendump' command has new argument 'format'. Let's expose
this on our QMP level so that callers can specify the format, if
they wish so.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For some reason, only @file argument is printed into debug logs.
The rest of arguments was left out. Include all arguments.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In its v7.1.0-rc0~125^2~6 commit, QEMU gained support for taking
screenshots in PNG format. Track this capability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Internal domain state needs to be refreshed after reset from the guest
side because it may be inconsistent with the internal qemu state.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Internal domain state may change during the reset and qemu does
not always send events about it. In case it happens, internal
state of the domain in libvirt would be inconsistent with the
internal state in qemu which could cause additional problems
(e.g. cdrom tray state can change from open to closed). The
solution is to refresh state after a successful reset to query
qemu about the current internal domain state.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1824722
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Paths for external devices (well, so far only vTPM) are not
stored in the status XML. Therefore, we need to regenerate them
after we've been restarted and reconnecting to a running domain.
Otherwise these will remain NULL which may later lead to a NULL
dereference.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2150760
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function is going to be called outside of qemu_extdevice.c.
Expose it to the rest of the driver.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The path generation phase belongs conceptually into domain
preparation phase and not host preparation. Move
qemuExtDevicesInitPaths() call from qemuExtDevicesPrepareHost()
into qemuExtDevicesPrepareDomain().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The domain startup process is split into multiple phases. One of
them is preparing the domain (at that point live) XML, private
data, various paths, etc - see qemuProcessPrepareDomain(); the
other prepares the host - see qemuProcessPrepareHost(). It's
obvious that the domain XML preparation function must be called
before the host preparation function (e.g. the host preparation
might try to create a file which path is generated in the domain
preparation phase). Nevertheless, let's document this
expectation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the 'cleanup' label and 'ret' variable as we can now directly
return form all cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainDeviceDefCopy' formats the definition and parses it back.
Since we already are parsing the XML here, we're better off parsing it
twice and save the formatting step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainDeviceDefCopy' formats the definition and parses it back.
Since we already are parsing the XML here, we're better off parsing it
twice and save the formatting step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use of qemuDomainValidateVcpuInfo in the helpers for hotplug and unplug
of vCPUs can lead to spurious errors reported such as:
internal error: qemu didn't report thread id for vcpu 'XX'"
The reason for this is that qemuDomainValidateVcpuInfo validates the
state of all vCPUs against the expected state of vCPUs. If an unplug
operation completed before libvirt was unable to process it yet the
expected state could not reflect the current state.
To avoid spurious errors the qemuDomainHotplugAddVcpu and
qemuDomainRemoveVcpu functions are modified to do localized validation
only for the vCPUs they actually modify.
We also now ensure that the cgroups are modified before bailing out on
error for any vCPUs which passed validation.
Additionally in order for qemuDomainRemoveVcpuAlias to be able to find
the unplugged vCPU we must ensure that qemuDomainRefreshVcpuInfo does
not clear out the alias in case when the vCPU is no longer reported by
qemu.
Co-authored-by: Partha Satapathy <partha.satapathy@oracle.com>
Signed-off-by: Shaleen Bathla <shaleen.bathla@oracle.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Recently, the QEMU driver gained support for migration with TPM
state on a shared volume (e.g. NFS). As a part of that, the
destination side avoids setting seclabels on it to avoid cutting
off the source while it is still using it. Makes sense, except
for a wee bit: the secdriver API does a bit more - it also sets
label on the swtpm log file. And this one definitely needs to be
labeled (it lives under /var/log/swtpm/libvirt/qemu/..., i.e. not
on a shared volume).
Previously, qemuSecurityStartTPMEmulator() took care of that. But
during rework to shared volume migration, the code was changed so
now plain qemuSecurityCommandRun() would be run (i.e. no
relabelling).
But after previous commits, we can now chose whether the TPM
state should be relabelled or just the log file.
Fixes: 2e669ec789231d39e0d5f5f6a201d2a661b8070c
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2130192#c7
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is basically just a continuation of the previous commit.
Now that the security driver APIs have a boolean flag that
controls setting/restoring seclabel of either both TPM state and
log files, or just the log file, propagate this boolean into
those APIs that start/stop swtpm emulator. For now, just pass
true. The juicy bits are soon to come.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virSecurityDomainSetTPMLabels() and
virSecurityDomainRestoreTPMLabels() APIs set/restore label on two
files/directories:
1) the TPM state (tpm->data.emulator.storagepath), and
2) the TPM log file (tpm->data.emulator.logfile).
Soon there will be a need to set the label on the log file but
not on the state. Therefore, extend these APIs for a boolean flag
that when set does both, but when unset does only 2).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virJSONValueObjectGetArray + virJSONValueArrayToStringList instead
so that the ofvirJSONValueObjectGetStringArray wrapper can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In two instances (qemuMonitorJSONGetStringListProperty,
qemuMonitorJSONGetStringArray) the return value is checked by
qemuMonitorJSONCheckReply and extracted by
virJSONValueObjectGetStringArray.
We can use qemuMonitorJSONGetReply which returns it directly and then
virJSONValueArrayToStringList to convert it without the additional
lookup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Using 'virJSONValueObjectHasKey' when we want to access the value
afterwards is wasteful. Fetch the JSON value right away.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than checking that the object has the correct key and then
fetching it again use fetch the array first and then use
virJSONValueArrayToStringList to directly convert it.
Additionally we can avoid the conversion if there are no members
simplifying the surrounding logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'dependencies' field in the return data may be missing in some
cases. Historically 'virJSONValueObjectGetStringArray' didn't report
error in such case, but later refactor (commit 043b50b948ef3c2 ) added
an error in order to use it in other places too.
Unfortunately this results in the error log being spammed with an
irrelevant error in case when qemuAgentGetDisks is invoked on a VM
running windows.
Replace the use of virJSONValueObjectGetStringArray by fetching the
array first and calling virJSONValueArrayToStringList only when we have
an array.
Fixes: 043b50b948ef3c2a4adf5fa32a93ec2589851ac6
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2149752
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use qemuMonitorJSONGetReply and unify the two blocks with the same
condition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use qemuMonitorJSONGetReply in cases where qemuMonitorJSONCheckReply
is followed by virJSONValueObjectGet*(reply, "return").
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace usage of the following pattern with the new helper:
if (qemuMonitorJSONCheckReply(cmd, reply, VIR_JSON_TYPE_ARRAY) < 0)
return -1;
data = virJSONValueObjectGetArray(reply, "return");
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Replace usage of the following pattern with the new helper:
if (qemuMonitorJSONCheckReply(cmd, reply, VIR_JSON_TYPE_OBJECT) < 0)
return -1;
data = virJSONValueObjectGetObject(reply, "return");
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rather than simply checking that the 'return' field is of the expected
type we can directly return it as the caller is very likely going to use
it. Extract the code into the new function and add a wrapper to preserve
old functionality.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Don't continue with the historical mistake and fix all internal
functions to use a sane type for flags.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCommandSetSendBuffer() function consumes passed @buffer,
but takes it only as plain pointer. Switch to a double pointer to
make this obvious. This allows us then to drop all
g_steal_pointer() in callers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
QEMU capabilities is the only thing we use from priv so we can just pass
that directly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When an internal API takes a vm pointer, it's usually just after the
driver argument.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The vm object is used inside qemuMigrationCookieParse based on the flags
passed to qemuMigrationCookieParse and the content of the cookie. The
callers should not just blindly guess and pass NULL if they
(incorrectly) think the vm object is not needed. We should always pass
the vm object unless it does not exist yet.
This fixes a bug when statistics of a completed migration reported
"Unknown" operation instead of "Incoming migration" on the destination
host.
https://bugzilla.redhat.com/show_bug.cgi?id=2137298
Fixes: v8.7.0-79-g0150f7a8c1
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Inside of qemuTPMEmulatorBuildCommand() there are two calls to
qemuTPMSetupEncryption() which simply ignore returned error. This
is suboptimal because then we rely on swtpm binary reporting a
generic error (something among invalid command line arguments)
while an error reported by qemuTPMSetupEncryption() is more
specific.
However, since virCommandSetSendBuffer() only sets an error
inside of virCommand structure (the error is then reported in
virCommandRun()), we need to exempt its retval from error
checking. Thus, the signature of qemuTPMSetupEncryption() is
changed a bit so that -1/0 can be returned to indicate error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When there is no vIOMMU, vfio devices don't need to lock the entire guest
memory per-device, but they still need to lock the entire guest memory to
share between all vfio devices. This memory accounting is not shared
with vDPA devices, so it should be added to the memlock limit separately.
Commit 8d5704e2 added support for multiple vfio/vdpa devices but
calculated the limits incorrectly when there were both vdpa and vfio
devices and no vIOMMU. In this case, the memory lock limit was not
increased separately for the vfio devices.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2143838
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When post-copy migration is running in Finish phase we already did
everything needed and we're just waiting for all the memory to transfer
to the destination. The domain is already running on there at this
point. Once all data is transferred (QEMU sends a MIGRATION completed
event) we're done. So in this specific post-copy case the source does
not need to care about the result of the Finish call as long as QEMU
says migration completed. The Finish call to the destination daemon may
fail for reasons that do not affect QEMU, e.g., libvirt daemon was
restarted there or the libvirt connection broke.
Currently we just mark the post-copy migration as failed on the source
and keep the domain paused there. But when libvirt daemon is restarted
at this point, it will detect migration finished successfully and kill
the domain as migrated. It make sense to do this even without having to
restart the daemon.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/338
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We need the restored job even in case the migration already finished
even though we will stop it just a few lines below as the functions we
call in between require an existing migration job.
This fixes a crash on reconnect when post-copy migration finished while
the daemon was not running.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When generating memory for main guest memory memory-backend-*
might be used. This means, we may need to generate thread-context
objects too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When generating memory for memory devices memory-backend-* might
be used. This means, we may need to generate thread-context
objects too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
