Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v3.1.0-rc3~8^2 the
query-display-options command is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v4.0.0-rc0~202^2~3 the
query-current-machine command is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.12.0-rc0~48^2~25 the
qom-list-properties command is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.6.0-rc0~74^2~6 the
DUMP_COMPLETED event is always available for all QEMU versions we
support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, before sending any guest agent command we would
send 'guest-sync' command to make guest agent reset its internal
state and flush any partially read command (json). This was
because there was no event emitted when the agent
(dis-)connected.
But now that we have the event we can execute the sync command
just once - the first time after we've connected. Should agent
disconnect in the middle of reading a command, and then connect
back again we would get the event and disconnect and connect back
again, resulting in the sync command being executed again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.1.0-rc0~18^2~2 the
VSERPORT_CHANGE event is always available for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v3.0.0-rc0~124^2~1 the
set-numa-node command is always available for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuDomainQueryWakeupSuspendSupport() does not change state
of the domain as it just runs 'query-current-machine' QMP
command. Therefore, there's no need for it to acquire MODIFY job,
QUERY job is perfectly okay.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The was an attempt to document the retvals for
qemuDomainQueryWakeupSuspendSupport(). However, it's misleading
because in reality, the function can return nothing but 0 or -1,
but the comment implies retval of 1 too.
Since the set of possible return values complies with our
unwritten rule (0 for success, -1 for error), there's no real
value in having the comment and as such can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we had no idea whether the qemu-ga running inside
the guest was running or not. Or whether it crashed in the middle
of reading of a command. That's why we issued guest-sync prior
any intended command, to make the agent flush any partially read
JSON and reset its state machine.
But with VSERPORT_CHANGE event we know when the guest agent
(dis-)connects and thus can issue the sync command just once for
each 'connection'. Whether the agent is synced is tracked in
agent->inSync member, which used to be set to true upon
successful sync. But after rework in v8.0.0-rc1~361 that line is
gone, leaving us with using the historic approach basically.
Fixes: cad84fd51e
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.12.0-rc0~148^2~4 the .align
attribute of memory-backend-file is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.11.0-rc0~95^2~9 the .discard
attribute of memory-backend-file is always available for all QEMU
versions we support (4.2.0, currently). Therefore, we can assume
the capability is always set and thus doesn't need to be checked
for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.1.0-rc0~41^2~26 only for Linux,
and later in v3.1.0-rc0~71^2~10 for all POSIX, the
memory-backend-file is going to be present for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that nothing uses this capability, it can be retired.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMUs have this capability. Stop detecting it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced in QEMU's commit of v2.1.0-rc0~41^2~104 the
memory-backend-ram is going to be present for all QEMU versions
we support (4.2.0, currently). Therefore, we can assume the
capability is always set and thus doesn't need to be checked for.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The g_slist_free_full() function is perfectly capable of handling
NULL (in which case it's NOP), therefore there's no need to check
passed pointers for NULL. We have them though in couple of
places. Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Glib can internally convert only unix timestamps up to
9999-12-31T23:59:59 (253402300799). Validate that the user doesn't use
more than that as otherwise we cause an assertion failure:
(process:1183396): GLib-CRITICAL **: 14:25:00.906: g_date_time_format: assertion 'datetime != NULL' failed
Additionally adjust the schema to allow bigger values as we use
'unsigned long long' to parse the value.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2128993
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a rare case when virHashAddEntry fails we would just leak the
structure we wanted to add to the hash table.
Fixes: e89acdbc3b
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The callers store only an 'unsigned int' in the field. Convert it to the
proper type including parser/formatter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adjust the parser and add missing switch cases to make the complier
happy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert the field, adjust the XML parser to use virXMLPropEnum and add
the VIR_DOMAIN_TIMER_TICKPOLICY_LAST enum case to all appropriate
'switch' statements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The libvirt version is stored in an 'unsigned int' use the proper XPath
query function for the type and remove the temporary variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of qemuDomainGetPreservedMounts() is to get a list of
filesystems mounted under /dev and optionally generate a path for
each one where they are moved temporarily when building the
namespace. And if given domain is also running it looks into its
mount table rather than at the host one. But if it did look at
the domain's private mount table, it find /dev mounted twice: the
first time by udev, the second time the tmpfs mounted by us.
Now, later in the function there's a "sorting" algorithm that
tries to reduce number of mount points needing preservation, by
identifying nested mount points. And if we keep the second
occurrence of /dev on the list, well, after the "sorting" we are
left with nothing but "/dev" because all other mount points are
nested.
Fixes: 46b03819ae
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of qemuDomainGetPreservedMounts() is to get a list of
filesystems mounted under /dev and optionally generate a path for
each one where they are moved temporarily when building the
namespace. And the function tries to be a bit clever about it.
For instance, if /dev/shm mount point exists, there's no need to
consider /dev/shm/a nor /dev/shm/b as preserving just 'top level'
/dev/shm gives the same result. To achieve this, the function
iterates over the list of filesystem as returned by
virFileGetMountSubtree() and removes the nested ones. However, it
does so in a bit clumsy way: plain VIR_DELETE_ELEMENT() is used
without freeing the string itself. Therefore, if all three
aforementioned example paths appeared on the list, /dev/shm/a and
/dev/shm/b strings would be leaked.
And when I think about it more, there's no real need to shrink
the array down (realloc()). It's going to be free()-d when
returning from the function. Switch to
VIR_DELETE_ELEMENT_INPLACE() then.
Fixes: cdd9205dff
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virTristateSwitchFromBool to fill in the default if user didn't
request it explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
libvirt-guests has After= dependency for all the sockets and that is enough.
With the extra Before= in the service file systemd postpones the start of the
socket activated service (when libvirt-guests is trying to connect to the
socket) until after libvirt-guests is stopped effectively making `systemctl stop
libvirt-guests` deadlock. The reason for that is that all stop jobs are
scheduled before any start job. Removing the redundant Before= specification
fixes this behaviour.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
On normal vm startup, we open a file descriptor
for the vsock device in qemuProcessPrepareHost.
However, when doing domxml-to-native, no file descriptors are open.
Only pass the fd if it's not -1, to make domxml-to-native work.
https://bugzilla.redhat.com/show_bug.cgi?id=1777212
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When libvirtd is restarted during an active outgoing migration (or
snapshot, save, or dump which are internally implemented as migration)
it wants to cancel the migration. But by a mistake in commit
v8.7.0-57-g2d7b22b561 the qemuMigrationSrcCancel function is called with
wait == true, which leads to an instant crash by dereferencing NULL
pointer stored in priv->job.current.
When canceling migration to file (snapshot, save, dump), we don't need
to wait until it is really canceled as no migration capabilities or
parameters need to be restored.
On the other hand we need to wait when canceling outgoing migration and
since we don't have virDomainJobData at this point, we have to
temporarily restore the migration job to make sure we can process
MIGRATION events from QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In my commit v8.7.0-57-g2d7b22b561 I attempted to make
qemuMigrationSrcCancel synchronous, but failed. When we are canceling
migration after some kind of error which is detected in
in qemuMigrationSrcWaitForCompletion, jobData->status will be set to
VIR_DOMAIN_JOB_STATUS_FAILED regardless on QEMU state. So instead of
relying on the translated jobData->status in qemuMigrationSrcIsCanceled
we need to check the migration status we get from QEMU MIGRATION event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As advertised in the previous commit, QEMU_SCHED_CORE_VCPUS case
is implemented for hotplug case. The implementation is very
similar to the cold boot case, except here we fork off for every
vCPU (because the implementation is done in
qemuProcessSetupVcpu() which is also the function that's called
from hotplug code). But that's okay because our hotplug APIs
allow hotplugging one device at the time.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2074559
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For QEMU_SCHED_CORE_VCPUS case, the vCPU threads should be placed
all into one scheduling group, but not the emulator or any of its
threads. Therefore, as soon as vCPU TIDs are detected, fork off a
child which then creates a separate scheduling group and adds all
vCPU threads into it.
Please note, this commit only handles the cold boot case. Hotplug
is going to be implemented in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For QEMU_SCHED_CORE_FULL case, all helper processes should be
placed into the same scheduling group as the QEMU process they
serve. It may happen though, that a helper process is started
before QEMU (cold start of a domain). But we have the dummy
process running from which the QEMU process will inherit the
scheduling group, so we can use the dummy process PID as an
argument to virCommandSetRunAmong().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
For QEMU_SCHED_CORE_EMULATOR or QEMU_SCHED_CORE_FULL the QEMU
process (and its vCPU threads) should be placed into its own
scheduling group. Since we have the dummy process running for
exactly this purpose use its PID as an argument to
virCommandSetRunAmong().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The aim of this helper function is to spawn a child process in
which new scheduling group is created. This dummy process will
then used to distribute scheduling group from (e.g. when starting
helper processes or QEMU itself). The process is not needed for
QEMU_SCHED_CORE_NONE case (obviously) nor for
QEMU_SCHED_CORE_VCPUS case (because in that case a slightly
different child will be forked off).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Ideally, we would just pick the best default and users wouldn't
have to intervene at all. But in some cases it may be handy to
not bother with SCHED_CORE at all or place helper processes into
the same group as QEMU. Introduce a knob in qemu.conf to allow
users control this behaviour.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are couple of scenarios where we need to reflect MAC change
done in the guest:
1) domain restore from a file (here, we don't store updated MAC
in the save file and thus on restore create the macvtap with
the original MAC),
2) reconnecting to a running domain (here, the guest might have
changed the MAC while we were not running),
3) migration (here, guest might change the MAC address but we
fail to respond to it,
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When restoring a domain from a save image, we need to query QEMU
for some runtime information that is not stored in status XML, or
even if it is, it's not parsed (e.g. virtio-mem actual size, or
soon rx-filters for macvtaps).
During migration, this is done in qemuMigrationDstFinishFresh(),
or in case of newly started domain in qemuProcessStart(). Except,
the way that the code is written, when restoring from a save
image (which is effectively a migration), the state is never
refreshed, because qemuProcessStart() sees incoming migration so
it does not refresh the state thinking it'll be done in the
finish phase. But restoring from a save image has no finish
phase. Therefore, refresh the state explicitly after the domain
was restored but before vCPUs are resumed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are not updating domain XML to new MAC address, just merely
setting host side of macvtap. But we don't need a MODIFY job for
that, QUERY is just fine.
This allows us to process the event should it occur during
migration.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Parts of the code that responds to the NIC_RX_FILTER_CHANGED
event are going to be re-used. Separate them into a function
(qemuDomainSyncRxFilter()) and move the code into qemu_domain.c
so that it can be re-used from other places of the driver.
There's one slight change though: instead of passing device alias
from the just received event to qemuMonitorQueryRxFilter(), I've
switched to using the alias stored in our domain definition. But
these two are guaranteed to be equal. virDomainDefFindDevice()
made sure about that, if nothing else.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no need to call virNetDevRxFilterFree() explicitly, when
corresponding variables can be declared as
g_autoptr(virNetDevRxFilter).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds a new worker qemuDomainGetStatsVm which reports the
stats returned by "query-stats" via qemuMonitorQueryStats for the VM
target.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
This patch adds the stats queried by qemuMonitorQueryStats for vCPU and
add them according to their QOM device path
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
This patch adds a hashtable for storing the stats schema and a function
to refresh it by querying "query-stats-schemas" using
qemuMonitorQueryStatsSchema
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
As qemu becomes more modularized, it is important for libvirt to advertise
availability of the modularized functionality through capabilities. This
change adds channel devices to domain capabilities, allowing clients such
as virt-install to avoid using spicevmc channel devices when not supported
by the target qemu.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The error message doesn't really convey the information that 3d
acceleration works only for the 'virtio' model and similarly the same
error would be reported if qemu doesn't support acceleration, which is
hard to debug.
Split and clarify the errors.
Noticed in https://gitlab.com/libvirt/libvirt/-/issues/388
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Users can play all sorts of games with mount points. For
instance, they can unmount and mount back a hugetlbfs and only
after that attempt to hotplug memory.
This has an unfortunate consequence though. During memory
hotplug, when qemuProcessBuildDestroyMemoryPaths() is called the
path is created with very restrictive mode (0700) because under
the hood g_mkdir_with_parents(path, 0700) is called.
Therefore, create the driver generic portion of the path
separately.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2134009
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
During its initialization, the QEMU driver iterates over
hugetlbfs mount points, creating the driver specific path in each
of them ($prefix/libvirt/qemu). This path is created with very
wide mode (0777) because per-domain directories are then created
under it.
Separate this code into a function so that it can be re-used.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
domcapabilities reports spice graphics support even against a minimal
qemu installation without spice modules. Checking for 'query-spice'
in the list of qmp commands supported by qemu is not sufficient to
determine spice support. Checking the command line produces acurrate
results.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As qemu becomes more modularized, it is important for libvirt to advertise
availability of the modularized functionality through capabilities. This
change adds USB redirect devices to domain capabilities, allowing clients
such as virt-install to avoid using redirdev devices when not supported
by the target qemu.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When libvirt is restarted, the qemuProcessShutdownReboot command is
executed to restore the VM that is being restarted. In this case, a
coredump may occur when we hotplug a pci device since the PCI address
hasn't be inited yet. Moving the initialization of address to the front
of qemuProcessShutdownOrReboot to ensure that we have the address inited.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If QEMU replies to device_del command with "DeviceNotFound"
error, then libvirt doesn't clean the device from the live
configuration.
This is because qemuMonitorDelDevice() returns -2 to
qemuDomainDeleteDevice() and instead of calling
qemuDomainRemoveDevice() the qemuDomainDetachDeviceLive() jumps
right onto cleanup label.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/359
Signed-off-by: Pierre LIBEAU <pierre.libeau@corp.ovh.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The @vendor variable inside virQEMUCapsCPUDefsToModels() is
allocated, but never freed. But there is actually no need for it
to be allocated, because it merely passes a retval of
virCPUGetVendorForModel() (which returns a const string) to
virDomainCapsCPUModelsAdd() (which ten accepts the argument as
const string). Therefore, drop the g_strdup() call and fix the
type of the variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Since commit "cpu_x86: Disable blockers from unusable CPU models"
(v3.8.0-99-g9c9620af1d) we explicitly disable CPU features reported by
QEMU as usability blockers for a particular CPU model when creating
baseline or host-model CPU definition. When QEMU changed canonical names
for some features (mostly those with '_' in their names), we forgot to
translate the blocker lists to names used by libvirt and the renamed
features would no longer be explicitly disabled in the created CPU model
even if they were reported as blockers by QEMU.
For example, on a host where EPYC CPU model has the following blockers
<blocker name='sha-ni'/>
<blocker name='mmxext'/>
<blocker name='fxsr-opt'/>
<blocker name='cr8legacy'/>
<blocker name='sse4a'/>
<blocker name='misalignsse'/>
<blocker name='osvw'/>
we would fail to disable 'fxsr-opt':
<cpu mode='custom' match='exact'>
<model fallback='forbid'>EPYC</model>
<feature policy='disable' name='sha-ni'/>
<feature policy='disable' name='mmxext'/>
<feature policy='disable' name='cr8legacy'/>
<feature policy='disable' name='sse4a'/>
<feature policy='disable' name='misalignsse'/>
<feature policy='disable' name='osvw'/>
<feature policy='disable' name='monitor'/>
</cpu>
The 'monitor' feature is disabled even though it is not reported as a
blocker by QEMU because libvirt's definition of EPYC includes the
feature while it is missing in EPYC definition in QEMU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
So far QEMU driver does not get CPU model vendor from QEMU directly and
it has to ask the CPU driver for the info stored in CPU map.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Even though several CPU models from various vendors are reported as
usable on a given host, user may still want to use only those that match
the host vendor. Currently the only place where users can check the
vendor of each CPU model is our CPU map, which is considered internal
and users should not really be using it directly. So to allow for such
filtering we now advertise the vendor of each CPU model in domain
capabilities.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only part of qemuCaps both functions are interested in is the CPU
architecture. Changing them to expect just virArch makes the functions
more reusable.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since the function always returns 0, we can just return void and make
callers simpler.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use virXMLParse so that the code doesn't have to explicitly allocate
an XPath context and validate the root element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Replace virNetworkDefParseString/File by direct calls to
virNetworkDefParse.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename virDomainBackupDefParse to virDomainBackupDefParseXML and use
it in place of virDomainBackupDefParseNode. This is possible as
virXMLParse can be used to replace XPath context allocation and root
node checking.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch 'fixes' the behavior of the persistent_state TPM domain XML
attribute that intends to preserve the state of the TPM but should not
keep the state around on all the hosts a VM has been migrated to. It
removes the TPM state directory structure from the source host upon
successful migration when non-shared storage is used. Similarly, it
removes it from the destination host upon migration failure when
non-shared storage is used.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add UNDEFINE_TPM and UNDEFINE_KEEP_TPM flags to qemuDomainUndefineFlags()
API and --tpm and --keep-tpm to 'virsh undefine'. Pass the
virDomainUndefineFlagsValues via qemuDomainRemoveInactive()
from qemuDomainUndefineFlags() all the way down to
qemuTPMEmulatorCleanupHost() and delete TPM storage there considering that
the UNDEFINE_TPM flag has priority over the persistent_state attribute
from the domain XML. Pass 0 in all other API call sites to
qemuDomainRemoveInactive() for now.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we no longer use the capability, stop probing for existence
of 'virtual-css-bridge' and its properties.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduced in libvirt by:
commit f245a9791c
qemu: introduce capability for virtual-css-bridge
Which mentions that its support was in QEMU 2.7.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This capability was introduced by libvirt commit:
commit 263e65fd20
qemu: introduce vfio-ccw capability
It probes for the cssid-unrestricted property of
virtual-css-bridge, which was introduced in QEMU v2.12 by:
commit 99577c492fb2916165ed9bc215f058877f0a4106
s390x/css: unrestrict cssids
Since we bumped the minimum QEMU version to 4.2.0, assume
this property is always present.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Let me take you on a short trip to history. A long time ago,
libvirt would configure all QEMUs to use $hugetlbfs/libvirt/qemu
for their hugepages setup. This was problematic, because it did
not allow enough separation between guests. Therefore in
v3.0.0-rc1~367 the path changed to a per-domain basis:
$hugetlbfs/libvirt/qemu/$domainShortName
And to help with migration on daemon restart a call to
qemuProcessBuildDestroyMemoryPaths() was added to
qemuProcessReconnect() (well, it was named
qemuProcessBuildDestroyHugepagesPath() back then, see
v3.10.0-rc1~174). This was desirable then, because the memory
hotplug code did not call the function, it simply assumes
per-domain paths to exist. But this changed in v3.5.0-rc1~92
after which the per-domain paths are created on memory hotplug
too.
Therefore, it's no longer necessary to create these paths in
qemuProcessReconnect(). They are created exactly when needed
(domain startup and memory hotplug).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When creating a node in QEMU's namespace the whole link chain is
created with it. Here, we use g_file_read_link() from the child
(running inside the namespace) to learn whether a link exists and
points to expected target. Now, when building the namespace there
can't be any symlinks and this g_file_read_link() returns NULL
always. And because we pass a local GError variable to it, glib
tries to set it to a localized error message. This comes with
creating a (static) hash table inside of g_strerror() and is
guarded with a mutex. The hash table is also allocated using
GSlice allocator instead of g_malloc, and since the latter is
safe to use after fork (because it's documented to use plain
malloc), glib went with the former, naturally. Now, GSlice
allocator has plenty of internal mutexes and thus hitting a
locked mutex is not that hard.
Fortunately, we don't care about any error from
g_file_read_link() and thus we can pass NULL which avoids calling
g_strerror().
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2120965
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The qemuNamespaceMknodPaths() function is responsible for
creating files/directories in QEMU's mount namespace. When
called, it is given list of paths that have to be created in the
namespace. It processes this list and removes items that are not
directly under /dev, but on a 'shared' filesystem (note that all
other mount points are preserved). And it may so happen that
after this pre-process no files/directories need to be created in
the namespace. If that's the case, exit early and avoid
fork()-ing only to find out the same.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Besides the -cpu host, The host-phys-bits=on applies to custom or max
cpu model, So the host-passthrough validation check is unnecessary for
maxphysaddr with mode='passthrough'.
Signed-off-by: Lin Ma <lma@suse.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
For prevent memory leak and easier to use, So change
virDomainEventTunableNew to get virTypedParameterPtr *params
and set it = NULL.
Signed-off-by: lu zhipeng <luzhipeng@cestc.cn>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
When reconnecting to a running QEMU process, we construct the
per-domain path in all hugetlbfs mounts. This is a relict from
the past (v3.4.0-100-g5b24d25062) where we switched to a
per-domain path and we want to create those paths when libvirtd
restarts on upgrade.
And with namespaces enabled there is one corner case where the
path is not created. In fact an error is reported and the
reconnect fails. Ideally, all mount events are propagated into
the QEMU's namespace. And they probably are, except when the
target path does not exist inside the namespace. Now, it's pretty
common for users to mount hugetlbfs under /dev (e.g.
/dev/hugepages), but if domain is started without hugepages (or
more specifically - private hugetlbfs path wasn't created on
domain startup), then the reconnect code tries to create it.
But it fails to do so, well, it fails to set seclabels on the
path because, because the path does not exist in the private
namespace. And it doesn't exist because we specifically create
only a subset of all possible /dev nodes. Therefore, the mount
event, whilst propagated, is not successful and hence the
filesystem is not mounted. We have to do it ourselves.
If hugetlbfs is mount anywhere else there's no problem and this
is effectively a dead code.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2123196
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Sometimes it may come handy to just bind mount a directory/file
into domain's namespace. Implement a thin wrapper over
qemuNamespaceMknodPaths() which has all the logic we need.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When setting up namespace for QEMU we look at mount points under
/dev (like /dev/pts, /dev/mqueue/, etc.) because we want to
preserve those (which is done by moving them to a temp location,
unshare(), and then moving them back). We have a convenience
helper - qemuDomainGetPreservedMounts() - that processes the
mount table and (optionally) moves the other filesystems too.
This helper is also used when attempting to create a path in NS,
because the path, while starting with "/dev/" prefix, may
actually lead to one of those filesystems that we preserved.
And here comes the corner case: while we require the parent mount
table to be in shared mode (equivalent of `mount --make-rshared /'),
these mount events propagate iff the target path exist inside the
slave mount table (= QEMU's private namespace). And since we
create only a subset of /dev nodes, well, that assumption is not
always the case.
For instance, assume that a domain is already running, no
hugepages were configured for it nor any hugetlbfs is mounted.
Now, when a hugetlbfs is mounted into '/dev/hugepages', this is
propagated into the QEMU's namespace, but since the target dir
does not exist in the private /dev, the FS is not mounted in the
namespace.
Fortunately, this difference between namespaces is visible when
comparing /proc/mounts and /proc/$PID/mounts (where PID is the
QEMU's PID). Therefore, if possible we should look at the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When creating a path in a domain's mount namespace we try to set
ACLs on it, so that it's a verbatim copy of the path in parent's
namespace. The ACLs are queried upfront (by
qemuNamespaceMknodItemInit()) but this is fault tolerant so the
pointer to ACLs might be NULL (meaning no ACLs were queried, for
instance because the underlying filesystem does not support
them). But then we take this NULL and pass it to virFileSetACLs()
which immediately returns an error because NULL is invalid value.
Mimic what we do with SELinux label - only set ACLs if they are
non-NULL which includes symlinks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When retiring QEMU_CAPS_BLOCKDEV_HOSTDEV_SCSI capability the
commit removed a bit too much. Previously, all other devices than
VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_SCSI were ignored in
qemuDomainDeviceHostdevDefPostParseRestoreBackendAlias(). But the
commit in question removed not only the capability check but also
this return early statement. Restore it back.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2129239
Fixes: dc8dbb27d4
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Upcoming patch which is fixing the opening of drivers in monolithic mode
needs to know whether we are inside 'libvirtd' but the code where the
decision needs to happen is not re-compiled per daemon. Thus we need to
pass this information to the stateful driver init function so that it
can be remebered.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of qemuProcessNeedHugepagesPath() is to determine whether
a hugetlbfs mount point is required for given domain (as in
whether qemuBuildMemoryBackendProps() picks up
memory-backend-file pointing to a hugetlbfs mount point). Well,
when domain is configured to use memfd backend then that
condition can never be true. Therefore, skip creating domain's
private path under hugetlbfs mount points.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now that all preceding flags were deleted we can fix the enum value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuMonitorJSONMigrate' is called from:
- qemuMonitorMigrateToHost
- qemuMonitorMigrateToSocket
Both of the above function are called only from
qemuMigrationSrcStart.
- qemuMonitorMigrateToFd
- called from:
- qemuMigrationSrcToFile
Both instances here pass QEMU_MONITOR_MIGRATE_BACKGROUND
directly.
- qemuMigrationSrcStart
qemuMigrationSrcStart is then called from qemuMigrationSrcRun and
qemuMigrationSrcResume, both of which always add QEMU_MONITOR_MIGRATE_BACKGROUND
to the flags.
Thus any caller always passes the flag so that we can remove the flag
altogether.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the support for enabling the 'blk' and 'inc' parameters of the
'migrate' command as there are no users any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU supported the NBD server required for the new-style migration for a
long time already and when coupled with -blockdev the old style
migration doesn't even work, thus remove support for it.
This patch modifies the code to check that the destination returned data
for the NBD migration and returns an error if it did not and deletes the
fallback code paths which would not work.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The NBD server (detected via 'nbd-server-start' qmp command) was added
to qemu in v1.3 and can't be compiled out.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In commit 6111b23522 removing pre-blockdev code paths I've
improperly refactored the setup of non-shared storage migration.
Specifically the code checking that there are disks and setting up the
NBD data in the migration cookie was originally outside of the loop
checking the user provided list of specific disks to migrate, but became
part of the block as it was not un-indented when a higher level block
was being removed.
The above caused that if non-shared storage migration is requested, but
the user doesn't provide the list of disks to migrate (thus implying to
migrate every appropriate disk) the code doesn't actually setup the
migration and then later on falls back to the old-style migration which
no longer works with blockdev.
Move the check that there's anything to migrate out of the
'nmigrate_disks' block.
Fixes: 6111b23522
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2125111
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/373
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Although these and functions in the following two patches are for
now just being used by the qemu driver, it makes sense to have all
begin job functions in the same file.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjEndJob() into
src/conf/virdomainjob as universal virDomainObjEndJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjBeginJob() into
src/conf/virdomainjob as universal virDomainObjBeginJob().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch uses the job object directly in the domain object and
removes the job object from private data of all drivers that use
it as well as other relevant code (initializing and freeing the
structure).
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds the generalized job object into the domain object
so that it can be used by all drivers without the need to extract
it from the private data.
Because of this, the job object needs to be created and set
during the creation of the domain object. This patch also extends
xmlopt with possible job config containing virDomainJobObj
callbacks, its private data callbacks and one variable
(maxQueuedJobs).
This patch includes:
* addition of virDomainJobObj into virDomainObj (used in the
following patches)
* extending xmlopt with job config structure
* new function for freeing the virDomainJobObj
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The following patches move job object as a member into the domain
object. Because of this, domain_conf (where the domain object is
defined) needs to import the file with the job object.
It makes sense to move jobs to the same level as the domain_conf:
into src/conf/
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch moves qemuDomainObjBeginJobInternal() as
virDomainObjBeginJobInternal() into hypervisor in order to be
used by other hypervisors in the following patches.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that we assume all the virtio capabilities, this function does not
check anything.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Added by QEMU commit:
commit 74b3e46630446568aecb0be1c77c4875d7a52f6d
Author: Jason Wang <jasowang@redhat.com>
CommitDate: 2019-10-25 07:46:22 -0400
virtio: add property to enable packed virtqueue
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Message-Id: <20191025083527.30803-9-eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
git describe: v4.1.0-1780-g74b3e46630 contains: v4.2.0-rc0~32^2~17
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
All the supported QEMU versions should have iothread support
on the virtio-scsi controllers if they are compiled in.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced by QEMU commit 0846e6359c407e372f446723b8b7b09ac20d0f03
released in QEMU 1.3.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We have always considered "migrate_cancel" QMP command to return after
successfully cancelling the migration. But this is no longer true (to be
honest I'm not sure it ever was) as it just changes the migration state
to "cancelling". In most cases the migration is canceled pretty quickly
and we don't really notice anything, but sometimes it takes so long we
even get to clearing migration capabilities before the migration is
actually canceled, which fails as capabilities can only be changed when
no migration is running. So to avoid this issue, we can wait for the
migration to be really canceled after sending migrate_cancel. The only
place where we don't need synchronous behavior is when we're cancelling
migration on user's request while it is actively watched by another
thread.
https://bugzilla.redhat.com/show_bug.cgi?id=2114866
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We will need a little bit more code around qemuMonitorMigrateCancel to
make sure it works as expected. The new qemuMigrationSrcCancel helper
will avoid repeating the code in several places.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Let's call this qemuMigrationSrcCancelUnattended as the function is
supposed to be used when no other thread is watching the migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Just before pushing my earlier commit I've switch order of two
arguments of virProcessGetStatInfo() (as suggested in review).
However, I forgot to swap the arguments in
qemuDomainGetStatsCpuProc() which leads to userTime and sysTime
being swapped.
Fixes: 044b8744d6
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For domains started under session URI, we don't set up CGroups
(well, how could we since we're not running as root anyways).
Nevertheless, fetching CPU statistics exits early because of
lacking cpuacct controller. But with recent extension to
virProcessGetStatInfo() we can get the values we need from the
proc filesystem. Implement the fallback for the session URI as
some of virt tools rely on cpu.* stats to be reported (virt-top,
virt-manager).
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/353
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1693707
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virProcessGetStatInfo() helper parses /proc stat file for
given PID and/or TID and reports cumulative cpuTime which is just
a sum of user and sys times. But in near future, we'll need those
times separately, so make the function return them too (if caller
desires).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Split up the condition and report a different error message when the
host or host config results in S390 PV launch security being
unavailable.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2122534
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
The replacement is 'serial' and 'parallel' respectively introduced at
least in qemu-2.9 and the old versions are deprecated since qemu-6.0
(qemu commit 5965243641d797b22 ).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virtio-*-(non-)-transitional device models which replace the use of
'disable-legacy'/'disable-modern' features were introduced in qemu-4.0.
This means we can remove the specific parts of the code for formatting
the old-style device options and replace all other code to solely depend
on the QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_VIRTIO_PCI_TRANSITIONAL is the evolution of
QEMU_CAPS_VIRTIO_PCI_DISABLE_LEGACY from qemu's point of view. Make sure
that we consider both when assesing whether a device belongs on PCIe.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When commit bac6b266fb added this "functionality" this was the only
naming I could think of, but after discussion with Dan we found the name
'null' fits a bit better, so change it before we make a release with the
old name.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Just like the socket, remove the pidfile when TPM emulator is being stopped. In
order to make this a bit cleaner, try to remove it even if swtpm_ioctl does not
exist.
https://bugzilla.redhat.com/show_bug.cgi?id=2111301
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After converting virNetworkDef * to g_autoptr(virNetworkDef) the
cleanup codepath was empty, so it has been removed.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virCommand module is specifically designed so that no caller
has to check for retval of individual virCommand*() APIs except
for virCommandRun() where the actual error is reported. Moreover,
virCommandNew*() use g_new0() to allocate memory and thus it's
not really possible for those APIs to return NULL. Which is why
they are even marked as ATTRIBUTE_NONNULL. But there are few
places where we do check the retval which is a dead code
effectively. Drop those checks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
When multiple VFIO or VDPA devices are assigned to a guest, the guest
can fail to start because the guest fails to map enough memory. For
example, the case mentioned in
https://bugzilla.redhat.com/show_bug.cgi?id=2111317 results in this
failure:
2021-08-05T09:51:47.692578Z qemu-kvm: failed to write, fd=31, errno=14 (Bad address)
2021-08-05T09:51:47.692590Z qemu-kvm: vhost vdpa map fail!
2021-08-05T09:51:47.692594Z qemu-kvm: vhost-vdpa: DMA mapping failed, unable to continue
The current memlock limit calculation does not work for scenarios where
there are multiple such devices assigned to a guest. The root causes are
a little bit different between VFIO and VDPA devices.
For VFIO devices, the issue only occurs when a vIOMMU is present. In
this scenario, each vfio device is assigned a separate AddressSpace
fully mapping guest RAM. When there is no vIOMMU, the devices are all
within the same AddressSpace so no additional memory limit is needed.
For VDPA devices, each device requires the full memory to be mapped
regardless of whether there is a vIOMMU or not.
In order to enable these scenarios, we need to multiply memlock limit
by the number of VDPA devices plus the number of VFIO devices for guests
with a vIOMMU. This has the potential for pushing the memlock limit
above the host physical memory and negating any protection that these
locked memory limits are providing, but there is no other short-term
solution.
In the future, there should be have a revised userspace iommu interface
(iommufd) that the VFIO and VDPA backends can make use of. This will be
able to share locked memory limits between both vfio and vdpa use cases
and address spaces and then we can disable these short term hacks. But
this is still in development upstream.
Resolves: https://bugzilla.redhat.com/2111317
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Now that we no longer care about any of their properties, there's no need
to call `device-list-properties` on these devices.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced back in 2013 by QEMU commit:
commit 398489018183d613306ab022653552247d93919f
pc: limit 64 bit hole to 2G by default
Released in 1.6.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduced back in 2012 by QEMU commit:
commit 783e9b4826b95e53e33c42db6b4bd7d89bdff147
introduce a new monitor command 'dump-guest-memory' to dump guest's memory
Released in QEMU 1.2.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Historically, the tpm->data.emulator.activePcrBanks member was an
unsigned int but since it was used as a bitmap it was converted
to virBitmap type instead. Now, the virBitmap is allocated inside
of virDomainTPMDefParseXML() but only if <activePcrBanks/> was
found with at last one child element. Otherwise it stays NULL.
Fast forward to starting a domain with TPM 2.0 and no
<activePcrBanks/> configured. Eventually,
qemuTPMEmulatorBuildCommand() is called, which subsequently calls
qemuTPMEmulatorReconfigure() and finally
qemuTPMPcrBankBitmapToStr() passing the NULL value. Before
rewrite to virBitmap this function would return NULL for empty
activePcrBanks but now, well, now it crashes.
Fixes: 52c7c31c80
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch uses qemuMonitorQueryStats to query "halt_poll_success_ns"
and "halt_poll_fail_ns" for every vCPU. The respective values for each
vCPU are then added together.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Related: https://gitlab.com/libvirt/libvirt/-/issues/276
This patch adds an API for the "query-stats" QMP command.
The query returns a JSON containing the statistics based on the target,
which can either be vCPU or VM, and the providers. The API deserializes
the query result into an array of GHashMaps, which can later be used to
extract all the query statistics. GHashMaps are used to avoid traversing
the entire array to find the statistics you are looking for. This would
be a singleton array if the target is a VM since the returned JSON is
also a singleton array in that case.
Signed-off-by: Amneesh Singh <natto@weirdnatto.in>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This represents an interface connected to a VMWare Distributed Switch,
previously obscured as a dummy interface.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduced back in 2010 by QEMU commit:
commit a697a334b3c4d3250e6420f5d38550ea10eb5319
virtio-net: Introduce a new bottom half packet TX
Released in QEMU 0.14.0
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
All callers pass 'true'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The blockdev-backup QMP command was introduced in qemu-2.3.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The event was introduced in qemu-2.3
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Set it same way we set throttling for other disks in
qemuProcessSetupDiskThrottling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
While we assume that -blockdev is supported the validator had also some
corner cases for -drive. Since we use '-drive' exclusively for the
extremely rarely used SD cards it makes no sense to have the validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The capability is checked when we validate the source in the first
place. Also it won't make sense any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we know we have a modern qemu at hand which can interpret the
dotted syntax, we can format the -drive needed for SD cards via the
common infrastructure we have for all blockdev stuff.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the generic frontend-less -drive code from qemuBuildDriveStr by
assuming that we support only blockdev-enabled qemus.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
SD card disks can't be detached, so it makes no sense to special case
them in the unplug code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All media are changed in blockdev-instantiated cdroms now, remove the
old code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The operation makes no sense regardless of the way how we specify disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With new qemu versions we setup floppies via -device.
Some legacy output tests were not modernized yet so the expected output
needs to be adjusted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'persistjob' is always true and 'top' and 'base' are always NULL.
Adjust the functions to drop the arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The top level API is unused so it can be removed but internally the JSON
version is called by other monitor commands which extract information
from the reply.
Thus qemuMonitorJSONQueryNamedBlockNodes is unexported and moved
appropriately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function and its callees were a bit more entangled so remove the
pre-blockdev code separately.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only instance in this file can be simplified to avoid checking the
capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With blockdev we are generating the nodenames ourselves so all of this
infrastructure became obsolete. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer need it as we use the more modern job events.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previous patches removed the job submission for the handler so now even
the handler itself can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported qemu versions now work with blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume that QEMU_CAPS_BLOCKDEV is present and remove all code executed
when it's not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The migration code was using few blockdev bits before blockdev was
fully integrated to allow TLS with NBD.
Since we now always use blockdev we can remove the check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We no longer need the arguments which were conditionally filled based on
presence of the QEMU_CAPS_BLOCKDEV feature.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume that QEMU_CAPS_BLOCKDEV is present and remove all code executed
when it's not.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In one of early iterations of the gluster driver 'tcp' was used instead
of 'inet' and 'socket' instead of 'path' for unix sockets. All of this
can be now removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that QEMU_CAPS_BLOCKDEV_HOSTDEV_SCSI is always set we can remove the
code which handled cases when the capability was not set.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'device_id' property of 'scsi_disk' was added in qemu-4.0 and it's
unconditionally present, thus we can now always assume its presence.
Update some fake-caps test which didn't yet assert the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code which fills 'qomName' does so only when the blockdev capability
is enabled so we don't have to check it separately as it can be only
non-NULL when blockdev is used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The cleanup of the code to always assume support for QEMU_CAPS_BLOCKDEV
will not be simple, so for now we hardcode the support and the code will
be cleaned up gradually.
We also disallow users to clear the flags via the namespace property or
qemu.conf configuration.
The change to the PPC64 test data originates from the fact that the
capability dump is not from the release version but is lacking one of
the necessary flags to enable -blockdev.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
luks-encrypted QCOW2 files were introduced in qemu-2.6 unconditionally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Discard and zero-detection for disk sources is supported since qemu-2.1
so we can always assume it's supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The debug level of gluster backend became configurable in qemu-2.8.
This also removes the only old-style syntax for the 'blockdev-add'
command prior to stabilization.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'debug' level for the gluster driver was added in qemu-2.8
unconditionally so libvirt can always assume it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Active block commit is supported since qemu-2.0
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Active layer block commit is unconditionally supported since qemu-2.0.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'change-backing-file' command is unconditionally supported since
qemu-2.1.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'change-backing-file' command was added in qemu-2.1 and doesn't have
any dependencies. We use it as witness for using blockjobs with relative
backing paths. Always assume it's supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We now only support qemu versions which already have the capability so
we can remove this now unused code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rename qemuBuildAudioCommandLineArgs to qemuBuildAudioCommandLine and
fix the arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the old now unused code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Generate only new version of the '-audiodev' commandline. The leftover
old code and validation will be removed in subsequent patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Per [1] the Debian 10 reaches EOL in August of 2022. This allows us to
bump the minimum supported qemu version to qemu-4.2 which will also
allow us to do significant cleanups.
This commit bumps the minimum qemu verison and updates the corresponding
docs.
[1]: https://wiki.debian.org/DebianReleases
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The only caller doesn't check the return value and actually doesn't have
one either. Remove the return value and adjust return statements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since we started handling the monitor EOF event inside a job any code
which uses virDomainObjWait would no longer properly abort in case when
the VM crashed during the wait.
This is because virDomainObjWait uses virDomainObjIsActive which checks
'vm->def->id' to see if the VM is still active. Unfortunately the domain
id is cleared in qemuProcessStop which is run only inside the job.
To fix this we can use the 'beingDestroyed' flag stored in the VM
private data which is set to true around the time when the condition is
signalled.
Reported-by: Pavel Hrdina <phrdina@redhat.com>
Fixes: 8c9ff9960b
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemu code will need to check other qemu-private conditions when
reporting success for waiting. Thus we must replace all use of it with a
qemu-specific helper. For now the helper forwards directly to
virDomainObjWait.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
