All modern qemus support sandboxing so this is covered by other tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The feature is supported by all supported qemu versions thus covered
thoroughly by other test cases.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test is now pointless since we always assume that this option is
present.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'set-numa-node' is the command which can set the equivalent parameters
to '-numa' in preconfig mode, so we can use it as witness to see that
-numa is supported.
To ensure that the old detection method is removed once we'll be bumping
qemu support add a comment with the appropriate version check.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All supported QEMU versions have all the fields so we can remove the
booleans controlling which fields are used on the monitor.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuMonitorJSONCheckError instead of handcrafted error reporting.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to automatic memory freeing and remove the cleanup section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
They are no longer used as we now assume that all tuning caps are
present and in case some will be removed we'll need to use different
probing methods.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
All currently supported qemu versions support all throttling
capabilities. It is unlikely that any of the fields will be removed in
the future and if it will we will need to do specific probing which is
possible via the 'throttle' object which is the replacement for the
legacy way to configure throttling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The configurability of the number of dies in a CPU can be inferred from
the presence of the 'die-id' field in 'query-hotpluggable-cpus'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Probing QEMU_CAPS_DRIVE_DISCARD and QEMU_CAPS_DRIVE_DETECT_ZEROES can be
replaced by looking into the QMP schema rather than looking at -drive
which isn't in use any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make it more obvious that we care about passing FDs on the commandline
before startup of qemu, which is used to avoid startup monitor polling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_CHARDEV_RECONNECT, QEMU_CAPS_CHARDEV_LOGFILE and
QEMU_CAPS_CHARDEV_FILE_APPEND can be probed from the appropriate fields
in 'chardev-add' probed via the QMP schema instead of the command line
parameters.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a comment that will attempt to discourage adding new capabilities
based on 'query-command-line-options'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a cross reference of the enum value name with the string
representation. This allows a quick cross-reference of the values
without having to open the header and implementation files separately.
To achieve this the checker code at first obtains a list of the
flags and cross-references them when checking the grouping in
syntax-check, thus we are guaranteed to stay in sync.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Further commits will be refactoring and minimizing capabilities being
parsed from 'query-command-line-options'. Group the struct driving the
detection by argument name so it's easier to spot options belonging
together.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming commit will always add the property so the negative tests would
stop working.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add g_autofree to functions changed in previous commits doing
g_auto cleanup for libxml2-related variables, where it could
lead to removal of a label.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use g_auto where possible, reducing variable scope where applicable.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move 'ctxt' and 'doc' inside the loop and mark them with g_auto.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Based on kernel commit messages the interface is
/sys/class/fc/fc_udev_device/appid_store
where we need to write the following string "$INODE:$APPID".
$INODE is the VM root cgroup inode in hexadecimal and $APPID is user
provided string that will be attached to each FC frame for the VM
within the cgroup identified by inode and has limit 128 bytes.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Prepare the function for additional sub-elements where all of the
sub-elements are optional.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There is no need to error out for empty <partition></partition> element
as we can just simply ignore it. This allows to simplify the function
and prepare it for new sub-elements of <resource>.
It makes the <partition> element optional so we need to reflect the
change in schema as well.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
For new feature Fibre Channel VMID we will need to get inode of the
VM root cgroup as it is used in the new kernel API together with VMID.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
commit 2e668a61d5ae4("Fix error handling when adding MCS labels") uses
the 'pctx' in virReportError after it has been freed. Fix it.
Fixes: 2e668a61d5
Signed-off-by: Zhenyu Ye <yezhenyu2@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Libvirt assumes that a SCSI bus can fit up to 8 devices
(including controller itself), except for so called wide bus
which can accommodate up to 16 devices (again, including
controller). This plays important role when computing 'drive'
address in virDomainDiskDefAssignAddress(). So far, the only
driver that enables wide SCSI bus is VMX. But with newer
releases, ESX is capable of "super wide" bus (64 devices).
We can blindly bump the limit in our code because then we would
compute address that's invalid for older ESX versions that we
still want to support.
Unfortunately, I haven't found a better place where to store this
than virDomainDef.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
After previous patch it can no longer happen that @def will be
NULL and *def won't be.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The way we parse VMX configuration is rather unfortunate,
especially when it comes to disks. We allocate an array that can
handle all possible disks but leave the array counter (ndisks) at
zero and increase it only after successful parsing. But, we never
size the array down to release unneeded chunks of memory.
We can do better: we can use VIR_APPEND_ELEMENT() to allocate
array as needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is an attachment from the following bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1738392
Notice that .vmx file has two scsi disks, but only one is
reported in the XML. This will be fixed later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
At the beginning of vmx.c we have a comment that maps
virtualHW.version field onto ESX version. However, it wasn't
updated in a while. Fill it in using the following kbase article:
https://kb.vmware.com/s/article/1003746
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Some variables are used in a loop and only freed in the cleanup
section because we need to be able to jump out of the loop.
Reduce their scope and free them automatically.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Use 'ostype' instead of generic 'str', to discourage
reuse. Also mark it as autofree.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
If the QEMU driver is configured to use the old "file" stdio
handler (meaning virtlogd is out of the picture) and a chardev
has a log file configured we rely on QEMU being able to create
the file itself. This may not be always possible (e.g. if the
logfile is set to a directory that QEMU process can't reach).
In such case we should create the file and just pass its FD to
QEMU.
We could do that unconditionally and just either pass FD from
virtlogd or the one we opened, because we bumped QEMU version
and are now requiring new enough QEMU. However, I'm keeping the
old style where logfile is appended on the cmd line for the tests
sake.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1989457
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
Again, we don't need full driver, just its config.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
