Based on some digital archaeology performed by jtomko, it's been determined
that the persistentAddrs variable is no longer necessary...
The variable was added by:
commit 141dea6bc7
CommitDate: 2010-02-12 17:25:52 +0000
Add persistence of PCI addresses to QEMU
Where it was set to 0 on domain startup if qemu did not support the
QEMUD_CMD_FLAG_DEVICE capability, to clear the addresses at shutdown,
because QEMU might make up different ones next time.
As of commit f5dd58a608
CommitDate: 2012-07-11 11:19:05 +0200
qemu: Extended qemuDomainAssignAddresses to be callable from
everywhere.
this was broken, when the persistentAddrs = 0 assignment was moved
inside qemuDomainAssignPCIAddresses and while it pretends to check
for !QEMU_CAPS_DEVICE, its parent qemuDomainAssignAddresses is only
called if QEMU_CAPS_DEVICE is present.
Since commit id '20a0fa8e' removed the QEMU_CAPS_DEVICE, Coverity notes
that it's no longer possible to have 'addrs' be NULL when checking for
a live domain since qemuDomainPCIAddressSetCreate would have jumped to
cleanup if addrs was NULL.
Instead of setting the flag before parsing the PCI address, set
it afterwards. This ensure we can never end up in a situation
where the flag has been set but pci_dev.physical_function has
not been filled in.
Commit c8b1a83605 changed the function, making it
impossible for callers to be able to tell whether a
non-negative return value means "physical function
address found and parsed correctly" or "couldn't find
corresponding physical function".
The important difference between the two being that,
in the latter case, the returned pointer is NULL and
should never, ever be dereferenced.
In order to cope with these changes, the callers
have to be updated.
Use the detected tray presence flag to trigger the tray waiting code
only if the given storage device in qemu reports to have a tray.
This is necessary as the floppy device lost it's tray as of qemu commit:
commit abb3e55b5b718d6392441f56ba0729a62105ac56
Author: Max Reitz <mreitz@redhat.com>
Date: Fri Jan 29 20:49:12 2016 +0100
Revert "hw/block/fdc: Implement tray status"
Commit 1fad65d49a used a really big hammer
and overwrote the error message that might be reported by qemu if the
tray is locked. Fix it by reporting the error only if no error is
currently set.
Error after commit mentioned above:
error: internal error: timed out waiting for disk tray status update
New error:
error: internal error: unable to execute QEMU command 'eject': Tray of
device 'drive-ide0-0-0' is not open
Extract information for all disks and update tray state and source only
for removable drives. Additionally store whether a drive is removable
and whether it has a tray.
Extract whether a given drive has a tray and whether there is no image
inserted.
Negative logic for the image insertion is chosen so that the flag is set
only if we are certain of the fact.
When reviewing libxl vif typename series[0] I found a bug
on xen-xm formatter where "virsh domxml-to-native xen-xm file.xml"
can lead to a NULL dereference if the disk driver isn't specified.
Fix this by checking for driver before writing/testing it down.
[0] https://www.redhat.com/archives/libvir-list/2016-April/msg01434.html
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
This is identical to type='bridge', but without the "connect to a
bridge" part, so it can be handled by using the same functions (and
often even the same cases in switch statements), after renaming
virLXCProcessSetupInterfaceBridged() to virLXCProcessInterfaceTap()
and enhancing it to skip bridge-related items when brname == NULL.
To be truly useful, we need to support setting the ip address on the
host side veth as well as guest side veth (already supported for
type='bridge'), as well as setting the peer address for both.
The <script> element (supported by type='ethernet' in qemu) isn't
supported in this patch. An error is logged at domain start time if it
is encountered. This may be changed in a later patch.
This patch follows the pattern used in qemu driver regarding
reference counting.
It changes lxcDomObjFromDomain() to ref the domain (using
virDomainObjListFindByUUIDRef()) and adds virDomainObjEndAPI() which
should be the only function in which the return value of
virObjectUnref() is checked. This makes all reference counting
deterministic and makes the code a bit clearer.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
Below is backtraces of two deadlocked threads:
thread #1:
virDomainConfVMNWFilterTeardown
virNWFilterTeardownFilter
lock updateMutex <------------
_virNWFilterTeardownFilter
try to lock interface <----------
thread #2:
learnIPAddressThread
lock interface <-------
virNWFilterInstantiateFilterLate
try to lock updateMutex <----------
The problem is fixed by unlocking interface before calling
virNWFilterInstantiateFilterLate to avoid updateMutex and interface ordering
deadlocks. Otherwise we are going to instantiate the filter while holding
interface lock, which will try to lock updateMutex, and if some other thread
instantiating a filter in parallel is holding updateMutex and is trying to
lock interface, both will deadlock.
Also it is safe to unlock interface before virNWFilterInstantiateFilterLate
because learnIPAddressThread stopped capturing packets and applied necessary
rules on the interface, while instantiating a new filter doesn't require a
locked interface.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Fix the regex for excluding files for this syntax-rule. The rule "include/"
will not work, because we are matching the whole line like this
"^(...|include/|...)$ so we need to use "include/libvirt/libvirt.+". The second
issue is that we are using only one '$' but there should be two of those at the
end. The last small adjustment is to escape dots '.' so it match only dot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
We need to append GNUTLS_CFLAGS while building utils because virtcrypto
is using it. This fixes build on freebsd where gnutuls is in
/usr/local/include.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Test disk-drive-network-rbd-auth-AES depends on existence of
gnutls_cipher_encrypt() function which was introduced in gnutls 2.10.0.
On systems without this function we should skip this test.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If try to stop VM or container which is already stopped than
Virtuozzo 7 returns code PRL_ERR_INVALID_ACTION_REQUESTED.
Error code PRL_ERR_DISP_VM_IS_NOT_STARTED is used in Virtuozzo 6
Commit 5e54361c added virStoragePoolObjClearVols before refreshPool
to prevent duplicate volume entries.
However it is not needed here because we're not refreshing the pool yet,
just checking for the existence of the refresh callback.
The actual refresh is done via virStorageVolFDStreamCloseCb
in virStorageVolPoolRefreshThread, which already calls
virStoragePoolObjClearVols.
This test requests a read-only virtual FAT drive on the IDE bus.
Read-only IDE drives are unsupported, but libvirt only displays
the error if it has the QEMU_CAPS_DRIVE_READONLY capability.
Read-write FAT drives are also unsupported.
Rather than only assigning a PCI address when no address is given at
all, also do it when the config says that the address type is 'pci',
but it gives no address (virDeviceInfoPCIAddressWanted()).
There are also several places after parsing but prior to address
assignment where code previously expected that any info with address
type='pci' would have a *valid* PCI address, which isn't always the
case - now we check not only for type='pci', but also for a valid
address (virDeviceInfoPCIAddressPresent()).
The test case added in this patch was directly copied from Cole's patch titled:
qemu: Wire up address type=pci auto_allocate
