They require the caller to provide the maximum number
of array elements upfront, leading to either incomplete
results or violations of the zero-one-infinity rule.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Q35 machine types 2.3 and older had an integrated floppy controller.
Support for these machine types was removed by QEMU commit
commit 86165b499edf8b03bb2d0e926d116c2f12a95bfe
q35: Remove old machine versions
git describe: v2.5.0-1530-g86165b499e contains: v2.6.0-rc0~76^2~4
In libvirt, we have bumped the minimum QEMU version to 2.11:
commit b4cbdbe90b
qemu: Formally deprecate support for qemu < 2.11
git describe: v7.3.0-13-gb4cbdbe90b contains: v7.4.0-rc1~300
Since this QEMU version only supports Q35 machine versions 2.4+,
remove the code dealing with older ones.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Simon Rowe <simon.rowe@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch also includes propagation of flags into the
virNetworkDefParse().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I have added new driver functions which define network with given
flags. I have also replaced definitions of the functions without
flags with function calls to the new ones.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I need to propagate flags for the next commit.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This new API allows to define network with given flags.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Where easily possible, declare variables with g_auto to reduce
the amount of calls in cleanup sections.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Kristina Hanicova <khanicov@redhat.com>
New clang has a false-positive about value of 'olddisks' being unused
after being set. This is clearly wrong because we want to use
'g_autofree' to clear it later.
While I'm against modifying good code for the sake of bad static
analysis in this case it's not obvious that we depend on the lifetime of
'olddisks' being needed until the end of the function as we store
pointers into it into the hash table and later copy them out.
Rewrite the code by assigning to 'olddisks' earlier and then using
'olddisks' in the loop, so it's clear where the lifetime of the objects
ends, and this should also silence the warning.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virNetworkDef was not freed if the function failed in the first
two ifs, causing a possible memory leak.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The variable is used inside a loop in which it's allocated in
each iteration. Bring it inside the loop so that g_autoptr()
kicks in each iteration.
Fixes: 3caa28dc50
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This essentially reverts:
commit ca5c8e1dc7
qemuxml2argvtest: Avoid conditions in test macro
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A helper that resets the log before each test and prints
it on failure.
It also takes the return variable as an argument,
so it can be used to eliminate number of branches
the compiler has to consider in the main function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Refactor to use automatic cleanup and remove the goto's.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While s390x doesn't have NUMA nodes it has libnuma which is still
helpful as it parses sysfs for us and kernel emulates NUMA#0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When using 'virsh freepages' or 'virsh allocpages' then
virHostMemGetFreePages() or virHostMemAllocPages() is called,
respectively. But the following may happen: libvirt was built
without numactl support and thus a fake NUMA node was constructed
for capabilities, which means that startCell is going to be 0.
But we can't blindly pass startCell = 0 to virNumaGetPageInfo()
nor virNumaSetPagePoolSize() because they would operate over node
specific path (/sys/devices/system/node/nodeX) rather than NUMA
agnostic path (/sys/kernel/mm/hugepages/) and we are not
guaranteed that the former exists (kernel might have been built
without NUMA support).
Resolves:https://bugzilla.redhat.com/show_bug.cgi?id=1978574
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In all three cases (LXC, QEMU and VBox drivers) the caller has
access to host capabilities and thus know the maximum NUMA node.
This means, that virHostMemAllocPages() doesn't have to query
it. Querying may fail if libvirt was compiled without numactl
support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In all three cases (LXC, QEMU and VBox drivers) the caller has
access to host capabilities and thus know the maximum NUMA node.
This means, that virHostMemGetFreePages() doesn't have to query
it. Querying may fail if libvirt was compiled without numactl
support.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This is just a small helper that will be used later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The 'PARSE' macro does not use '#' or '##' directives,
or anything from outside of the macro other than the
cleanup label.
Turn it into a function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that it uses virnetdevbandwidthmock which we only
build on Linux.
Fixes: eb55e8a897
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A logic bug in the code creating overlays on existing images resulted
into wrongly using "luks" instead of "qcow2" for the backing format if
the backing image is an luks-encrypted qcow2. The special format munging
is needed only for raw luks images.
In practice the impact is not as critical as to use encrypted images in
the backing chain the user must fully describe the backing chain
including backing images to provide encryption keys, which overrides the
metadata recorded in the qcow2 header.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We need to validate the XML against schema if option '--validate'
was passed to the virsh command. This patch also includes
propagation of flags into the virSecretDefParse() function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We need to validate the XML against schema if option 'validate'
was passed to the 'iface-define' virsh command. For that we need
to allow validation flag and propagate flags to parse function.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
We need to know if validation flag is present in order to
validate given XML against schema in virXMLParse().
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
