Currently we report a bogus error message when macvlan
creation fails:
error: Failed to start domain migtest
error: operation failed: Unable to create macvlan device
With this removed, we see the real error:
error: Failed to start domain migtest
error: Unable to get index for interface p31p1: No such device
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use of the select() system call is inherantly dangerous since
applications will hit a buffer overrun if any FD number exceeds
the size of the select set size (typically 1024). Replace the
two uses of select() with poll() and use cfg.mk to ban any
future use of select().
NB: This changes the phyp driver so that it uses an infinite
timeout, instead of busy-waiting for 1ms at a time.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This adds both attachment and detachment support for scsi host
device.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat>
Found that I was unable to start existing domains after updating
to a kernel with no cgroups support
# zgrep CGROUP /proc/config.gz
# CONFIG_CGROUPS is not set
# virsh start test
error: Failed to start domain test
error: Unable to initialize /machine cgroup: Cannot allocate memory
virCgroupPartitionNeedsEscaping() correctly returns errno (ENOENT) when
attempting to open /proc/cgroups on such a system, but it was being
dropped in virCgroupSetPartitionSuffix().
Change virCgroupSetPartitionSuffix() to propagate errors returned by
its callees. Also check for ENOENT in qemuInitCgroup() when determining
if cgroups support is available.
It's better to put the usb related codes into qemuDomainAttachHostUsbDevice
instead of qemuDomainAttachHostDevice.
And in the old qemuDomainAttachHostDevice, just stealing the "usb" from
driver->activeUsbHostdevs leaks the memory.
Although virtio-scsi supports SCSI PR (Persistent Reservations),
the device on host may do not support it. To avoid losing data,
Just like PCI and USB pass through devices, only one live guest
is allowed per SCSI host pass through device."
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
The LXC driver can already configure <disk> or <filesystem>
devices to use the loop device. This extends it to also allow
for use of the NBD device, to support non-raw formats.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The <filesystem> element can now accept a <driver type='nbd'/>
as an alternative to 'loop'. The benefit of NBD is support
for non-raw disk image formats.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a virFileNBDDeviceAssociate method, which given a filename
will setup a NBD device, using qemu-nbd as the server.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To correctly handle errors from readdir() you must set 'errno'
to zero before invoking it & check its value afterwards to
distinguish error from EOF.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The current code for setting up loop devices to LXC disks first
does a switch() based on the disk format, then looks at the
disk driver name. Reverse this so it first looks at the driver
name, and then the disk format. This is more useful since the
list of supported disk formats depends on what driver is used.
The code for setting loop devices for LXC fs entries also needs
to have the same logic added, now the XML schema supports this.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Extend the <driver> element in filesystem devices to
allow a storage format to be set. The new attribute
uses 'format' to reflect the storage format. This is
different from the <driver> element in disk devices
which use 'type' to reflect the storage format. This
is because the 'type' attribute on filesystem devices
is already used for the driver backend, for which the
disk devices use the 'name' attribute. Arggggh.
Anyway for disks we have
<driver name="qemu" type="raw"/>
And for filesystems this change means we now have
<driver type="loop" format="raw"/>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
To not introduce more redundant code, helpers are added for
both "selinux", "dac", and "apparmor" backends.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat>
v2.5 - v3:
* Splitted from 8/10 of v2.5
* Don't forget the other backends (DAC, and apparmor)
This adds the scsi-generic device into the device controller's
whitelist, so that it's allowed to used by the qemu process.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
Except the scsi host device's controller is "lsilogic", mapping
between the libvirt attributes and scsi-generic properties is:
libvirt qemu
-----------------------------------------
controller bus ($libvirt_controller.0)
bus channel
target scsi-id
unit lun
For scsi host device with "lsilogic" controller, the mapping is:
('target (libvirt)' must be 0, as it's not used; 'unit (libvirt)
must <= 7).
libvirt qemu
----------------------------------------------------------
controller && bus bus ($libvirt_controller.$libvirt_bus)
unit scsi-id
It's not good to hardcode/hard-check limits of these attributes,
and even worse, these limits are not documented, one has to find
out by either testing or reading the qemu code, I'm looking forward
to qemu expose limits like these one day). For example, exposing
"max_target", "max_lun" for megasas:
static const struct SCSIBusInfo megasas_scsi_info = {
.tcq = true,
.max_target = MFI_MAX_LD,
.max_lun = 255,
.transfer_data = megasas_xfer_complete,
.get_sg_list = megasas_get_sg_list,
.complete = megasas_command_complete,
.cancel = megasas_command_cancel,
};
Example of the qemu command line (lsilogic controller):
-drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
-device scsi-generic,bus=scsi0.0,scsi-id=8,\
drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0
Example of the qemu command line (virtio-scsi controller):
-drive file=/dev/sg2,if=none,id=drive-hostdev-scsi_host7-0-0-0 \
-device scsi-generic,bus=scsi0.0,channel=0,scsi-id=128,lun=128,\
drive=drive-hostdev-scsi_host7-0-0-0,id=hostdev-scsi_host7-0-0-0
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
Adding two cap flags for scsi-generic:
QEMU_CAPS_SCSI_GENERIC
QEMU_CAPS_SCSI_GENERIC_BOOTINDEX
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
An example of the scsi hostdev XML:
<hostdev mode='subsystem' type='scsi'>
<source>
<adapter name='scsi_host0'/>
<address bus='0' target='0' unit='0'/>
</source>
<address type='drive' controller='0' bus='0' target='4' unit='8'/>
</hostdev>
Controller is implicitly added for scsi hostdev, though the scsi
controller's model defaults to "lsilogic", which might be not what
the user wants (same problem exists for virtio-scsi disk). It's
the existing problem, will be addressed later.
The device address must be specified manually. Later patch will let
libvirt generate it automatically.
This only introduces the generic XMLs for scsi hostdev, later patches
will add other elements, e.g. <readonly>, <shareable>.
Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
Signed-off-by: Osier Yang <jyang@redhat.com>
The helper works for default sysfs_prefix, but for user specified
prefix, it doesn't work. (Detected when writing test cases. A later
patch will add the test cases for fc_host).
In case of the caller can pass a "prefix" (or "sysfs_prefix")
without the trailing slash, and Unix-Like system always eats
up the redundant "slash" in the filepath, let's add it explicitly.
Introduced by commit 244ce462e2, which refactored the helper for wwn
reading, however, it forgot to change the old "strndup" and "sizeof(buf)",
"sizeof(buf)" operates on the fixed length array ("buf") in the old code,
but now "buf" is a pointer.
Before the fix:
% virsh nodedev-dumpxml scsi_host5
<device>
<name>scsi_host5</name>
<parent>pci_0000_04_00_1</parent>
<capability type='scsi_host'>
<host>5</host>
<capability type='fc_host'>
<wwnn>2001001b</wwnn>
<wwpn>2101001b</wwpn>
<fabric_wwn>2001000d</fabric_wwn>
</capability>
</capability>
</device>
With the fix:
% virsh nodedev-dumpxml scsi_host5
<device>
<name>scsi_host5</name>
<parent>pci_0000_04_00_1</parent>
<capability type='scsi_host'>
<host>5</host>
<capability type='fc_host'>
<wwnn>0x2001001b32a9da4e</wwnn>
<wwpn>0x2101001b32a9da4e</wwpn>
<fabric_wwn>0x2001000dec9877c1</fabric_wwn>
</capability>
</capability>
</device>
Commit bfe7721d introduced a regression, but only on platforms
like FreeBSD that lack posix_fallocate and where mmap serves as
a nice fallback for safezero.
util/virfile.c: In function 'safezero':
util/virfile.c:837: error: 'PROT_READ' undeclared (first use in this function)
* src/util/virutil.c (includes): Move use of <sys/mman.h>...
* src/util/virfile.c (includes): ...to the file that uses mmap.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently the fdstream function hardcodes the location
of the iohelper to LIBEXECDIR "/libvirt_iohelper". This
is not convenient when trying to write test cases which
use this code. Add a virFDStreamSetIOHelper method to
allow the test cases to point to the location of the
un-installed iohelper binary.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Apps using libvirt will often have code like
if (virXXXX() < 0) {
virErrorPtr err = virGetLastError();
fprintf(stderr, "Something failed: %s\n",
err && err->message ? err->message :
"unknown error");
return -1;
}
Checking for a NULL error object or message leads to very
verbose code. A virGetLastErrorMessage() helper from libvirt
can simplify this to
if (virXXXX() < 0) {
fprintf(stderr, "Something failed: %s\n",
virGetLastErrorMessage());
return -1;
}
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In b2878ed860 we added the O_NOCTTY
flag when opening files in the stream code. Unfortunately a later
piece of code was comparing the flags == O_RDONLY, without masking
out the non-access mode flags. This broke the iohelper when used
with streams for read, since it caused us to attach the stream
output pipe to the stream input FD instead of output FD :-(
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It is possible to build a kernel without swap cgroup controls
present. This causes a fatal error when querying memory
parameters. Treat missing swap controls as meaning "unlimited".
The fatal error remains if the user tries to actually change
the limit.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
- provide virNetDevSetMAC() implementation based on SIOCSIFLLADDR
ioctl.
- adjust virNetDevExists() to check for ENXIO error because
FreeBSD throws it when device doesn't exist
Signed-off-by: Eric Blake <eblake@redhat.com>
These all existed before virfile.c was created, and for some reason
weren't moved.
This is mostly straightfoward, although the syntax rule prohibiting
write() had to be changed to have an exception for virfile.c instead
of virutil.c.
This movement pointed out that there is a function called
virBuildPath(), and another almost identical function called
virFileBuildPath(). They really should be a single function, which
I'll take care of as soon as I figure out what the arglist should look
like.
This resolves:
https://bugzilla.redhat.com/show_bug.cgi?id=851411https://bugzilla.redhat.com/show_bug.cgi?id=955500
The first problem was that virFileOpenAs was returning fd (-1) in one
of the error cases rather than ret (-errno), so the caller thought
that the error was EPERM rather than ENOENT.
The second problem was that some log messages in the general purpose
qemuOpenFile() function would always say "Failed to create" even if
the caller hadn't included O_CREAT (i.e. they were trying to open an
existing file).
This fixes virFileOpenAs to jump down to the error return (which
returns ret instead of fd) in the previously mentioned incorrect
failure case of virFileOpenAs(), removes all error logging from
virFileOpenAs() (since the callers report it), and modifies
qemuOpenFile to appropriately use "open" or "create" in its log
messages.
NB: I seriously considered removing logging from all callers of
virFileOpenAs(), but there is at least one case where the caller
doesn't want virFileOpenAs() to log any errors, because it's just
going to try again (qemuOpenFile()). We can't simply make a silent
variation of virFileOpenAs() though, because qemuOpenFile() can't make
the decision about whether or not it wants to retry until after
virFileOpenAs() has already returned an error code.
Likewise, I also considered changing virFileOpenAs() to return -1 with
errno set on return, and may still do that, but only as a separate
patch, as it obscures the intent of this patch too much.
Update the DRIVER_SOURCE_FILES variable to reference the
other various XXX_SOURCES variables, instead of duplicating
the filename lists. This results in a bunch of extra files
being processed, but the test scripts can easily skip those
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The previous update of method naming missed the ESX storage
backend files. Update them is that the driver impl methods
follow the naming of the public API but with s/vir/esx/
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virNWFilterTechDriver struct is an internal only driver
API with no public API equivalent. It should be skipped by
the 'check-driverimpls' test case
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some methods in the udev interface driver used 'cleanup' as the
label for separate error codepaths. Change these to use 'error'
as required by coding standards
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Print an error instead of crashing when a TPM device without
a backend is specified.
Add a test for tpm device with no backend, which should fail
with a parse error.
https://bugzilla.redhat.com/show_bug.cgi?id=961252
Make the Xen domain stats / peek and node memory driver
methods unconditionally call the sub-drivers which are
guaranteed to be open.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make the Xen domain scheduler parameter methods directly
call into XenD or Xen hypervisor drivers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make the domain define/undefine driver methods directly call
into either the XenD or XM drivers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The xenUnifiedDomainGetXMLDesc driver can assume that
the XM and XenD drivers are always present
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make the xenUnifiedDomainGetInfo and xenUnifiedDomainGetState drivers
call the correct sub-driver APIs directly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make xenUnifiedDomainGetOSType directly call either the
xenHypervisorDomainGetOSType or xenDaemonDomainGetOSType
method depending on whether the domain is active or not.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditionally call the xenDaemonDomainDestroyFlags API
since the XenD driver is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make the xenUnifiedDomainShutdownFlags and xenUnifiedDomainReboot
driver methods unconditionally call the XenD APIs for shutdown
and reboot. Delete the unreachable impls in the XenStore driver.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update xenUnifiedDomainSuspend and xenUnifiedDomainResume to
unconditionally invoke the XenD APIs for suspend/resume. Delete
the impls in the hypervisor driver which was unreachable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditionally invoke the xenHypervisorLookupDomainByID,
xenHypervisorLookupDomainByUUID or xenDaemonLookupByName
for looking up domains. Fallback to xenXMDomainLookupByUUID
and xenXMDomainLookupByName for legacy XenD without inactive
domain support
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditionally call xenDaemonCreateXML in the
xenUnifiedDomainCreateXML driver, since the XenD
driver is always present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The XenStore driver is mandatory, so it can be used unconditonally
for the xenUnifiedConnectListDomains & xenUnifiedConnectNumOfDomains
drivers. Delete the unused XenD and Hypervisor driver code for
listing / counting domains
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditionally call into xenHypervisorGetMaxVcpus and
xenDaemonNodeGetInfo respectively, since those drivers
are both mandatory
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The hypervisor driver is mandatory, so the the call to
xenHypervisorGetVersion must always succeed. Thus there
is no need to ever run xenDaemonGetVersion
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There is no point iterating over sub-drivers since the user
would not have a virConnectPtr instance at all if opening
the drivers failed. Just return 'Xen' immediately.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since the Xen driver was changed to only execute inside libvirtd,
there is no scenario in which it will be opened from a non-privileged
context. Thus all the code dealing with opening the sub-drivers can
be simplified to assume that they are always privileged.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The Xen driver uses a macro GET_PRIVATE as a supposed shorthand
for 'xenUnifiedPrivatePtr priv = (xenUnifiedPrivatePtr) (conn)->privateData'.
It does not in fact save any lines of code, and obscures what is
happening. Remove it, since it adds no value.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some of the Xen sub-drivers have checks against the
VIR_CONNECT_RO flag. This is not required, since such
checks are done at the top level before the driver
methods are invoked
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The Xen hypervisor driver checks for 'priv->handle < 0' and
returns -1, but without raising any error. Fortunately this
code will never be executed, since the main Xen driver always
checks 'priv->opened[XEN_UNIFIED_HYPERVISOR_OFFSET]' prior
to invoking any hypervisor API. Just remove the redundant
checks for priv->handle
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The udevFreeIfaceDef function in the udev interface driver
just duplicates code from virInterfaceDefFree. Delete it
and call the standard API instead.
Fix the udevGetIfaceDefVlan method so that it doesn't
store pointers to the middle of a malloc'd memory
area.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
