Make the Xen domain stats / peek and node memory driver
methods unconditionally call the sub-drivers which are
guaranteed to be open.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make the Xen domain scheduler parameter methods directly
call into XenD or Xen hypervisor drivers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make the domain define/undefine driver methods directly call
into either the XenD or XM drivers
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The xenUnifiedDomainGetXMLDesc driver can assume that
the XM and XenD drivers are always present
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make the xenUnifiedDomainGetInfo and xenUnifiedDomainGetState drivers
call the correct sub-driver APIs directly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make xenUnifiedDomainGetOSType directly call either the
xenHypervisorDomainGetOSType or xenDaemonDomainGetOSType
method depending on whether the domain is active or not.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditionally call the xenDaemonDomainDestroyFlags API
since the XenD driver is always available.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Make the xenUnifiedDomainShutdownFlags and xenUnifiedDomainReboot
driver methods unconditionally call the XenD APIs for shutdown
and reboot. Delete the unreachable impls in the XenStore driver.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Update xenUnifiedDomainSuspend and xenUnifiedDomainResume to
unconditionally invoke the XenD APIs for suspend/resume. Delete
the impls in the hypervisor driver which was unreachable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditionally invoke the xenHypervisorLookupDomainByID,
xenHypervisorLookupDomainByUUID or xenDaemonLookupByName
for looking up domains. Fallback to xenXMDomainLookupByUUID
and xenXMDomainLookupByName for legacy XenD without inactive
domain support
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditionally call xenDaemonCreateXML in the
xenUnifiedDomainCreateXML driver, since the XenD
driver is always present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The XenStore driver is mandatory, so it can be used unconditonally
for the xenUnifiedConnectListDomains & xenUnifiedConnectNumOfDomains
drivers. Delete the unused XenD and Hypervisor driver code for
listing / counting domains
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditionally call into xenHypervisorGetMaxVcpus and
xenDaemonNodeGetInfo respectively, since those drivers
are both mandatory
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The hypervisor driver is mandatory, so the the call to
xenHypervisorGetVersion must always succeed. Thus there
is no need to ever run xenDaemonGetVersion
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There is no point iterating over sub-drivers since the user
would not have a virConnectPtr instance at all if opening
the drivers failed. Just return 'Xen' immediately.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since the Xen driver was changed to only execute inside libvirtd,
there is no scenario in which it will be opened from a non-privileged
context. Thus all the code dealing with opening the sub-drivers can
be simplified to assume that they are always privileged.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The Xen driver uses a macro GET_PRIVATE as a supposed shorthand
for 'xenUnifiedPrivatePtr priv = (xenUnifiedPrivatePtr) (conn)->privateData'.
It does not in fact save any lines of code, and obscures what is
happening. Remove it, since it adds no value.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some of the Xen sub-drivers have checks against the
VIR_CONNECT_RO flag. This is not required, since such
checks are done at the top level before the driver
methods are invoked
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The Xen hypervisor driver checks for 'priv->handle < 0' and
returns -1, but without raising any error. Fortunately this
code will never be executed, since the main Xen driver always
checks 'priv->opened[XEN_UNIFIED_HYPERVISOR_OFFSET]' prior
to invoking any hypervisor API. Just remove the redundant
checks for priv->handle
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The udevFreeIfaceDef function in the udev interface driver
just duplicates code from virInterfaceDefFree. Delete it
and call the standard API instead.
Fix the udevGetIfaceDefVlan method so that it doesn't
store pointers to the middle of a malloc'd memory
area.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC, QEMU, and LibXL drivers have all merged their handling of
the attach/update/modify device APIs into one large
'xxxxDomainModifyDeviceFlags'
which then does a 'switch()' based on the actual API being invoked.
While this saves some lines of code, it is not really all that
significant in the context of the driver API impls as a whole.
This merger of the handling of different APIs creates pain when
wanting to automated analysis of the code and do things which
are specific to individual APIs. The slight duplication of code
from unmerged the API impls, is preferrable to allow for easier
automated analysis.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the parsing of XML is pushed down into the various
migration helper APIs. This makes it difficult to insert the
correct access control checks, since one helper API services
many public APIs. Pull the parsing of XML up to the top level
of the QEMU driver APIs
Several APIs allow for custom XML to be passed in. This is
checked for ABI stability, which will ensure the UUID is
not being changed. There isn't validation that the name
did not change though. This could allow renaming of guests
via the backdoor, which in turn could allow for bypassing
access control restrictions based on names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In renaming driver API implementations to match the
public API naming scheme, a few cases in the node
device driver were missed.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The individual hypervisor drivers were directly referencing
APIs in virnodesuspend.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be removed
from the virnodesuspend.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The individual hypervisor drivers were directly referencing
APIs in src/nodeinfo.c in their virDriverPtr struct. Separate
these methods, so there is always a wrapper in the hypervisor
driver. This allows the unused virConnectPtr args to be
removed from the nodeinfo.c file. Again this will ensure that
ACL checks will only be performed on invocations that are
directly associated with public API usage.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virGetHostname() API has a bogus virConnectPtr
parameter. This is because virtualization drivers directly
reference this API in their virDriverPtr tables, tieing its
API design to the public virConnectGetHostname API design.
This also causes problems for access control checks since
these must only be done for invocations from the public
API, not internal invocation.
Remove the bogus virConnectPtr parameter, and make each
hypervisor driver provide a dedicated function for the
driver API impl. This will allow access control checks
to be easily inserted later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since PIDs can be reused, polkit prefers to be given
a (PID,start time) pair. If given a PID on its own,
it will attempt to lookup the start time in /proc/pid/stat,
though this is subject to races.
It is safer if the client app resolves the PID start
time itself, because as long as the app has the client
socket open, the client PID won't be reused.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
There are various methods named "virXXXXSecurityContext",
which are specific to SELinux. Rename them all to
"virXXXXSELinuxContext". They will still raise errors at
runtime if SELinux is not compiled in
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It is possible for $line to be undefined at first used, if
the symfile doesn't have a section prefix (which is the case
for auto-generated symfiles).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the volume is of a clustered volume group, and not active, the
related pool APIs fails on opening /dev/vg/lv. If the volume is
suspended, it hangs on open(2) the volume.
Though the best solution is to expose the volume status in volume
XML, and even better to provide API to activate/deactivate the volume,
but it's not the work I want to touch currently. Volume status in
other status is just fine to skip.
About the 5th field of lv_attr (from man lvs[8])
<quote>
5 State: (a)ctive, (s)uspended, (I)nvalid snapshot, invalid
(S)uspended snapshot, snapshot (m)erge failed,suspended
snapshot (M)erge failed, mapped (d)evice present without
tables, mapped device present with (i)nactive table
</quote>
While reviewing proposed VIR_STRDUP conversions, I've already noticed
several places that do:
if (str && VIR_STRDUP(dest, str) < 0)
which can be simplified by allowing str to be NULL (something that
strdup() doesn't allow). Meanwhile, code that wants to ensure a
non-NULL dest regardless of the source can check for <= 0.
Also, make it part of the VIR_STRDUP contract that macro arguments
are evaluated exactly once.
* src/util/virstring.h (VIR_STRDUP, VIR_STRDUP_QUIET, VIR_STRNDUP)
(VIR_STRNDUP_QUIET): Improve contract.
* src/util/virstring.c (virStrdup, virStrndup): Change return
conventions.
* docs/hacking.html.in: Document this.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
VIR_APPEND_ELEMENT(array, size, elem) was not safe if the expression
for 'size' had side effects. While no one in the current code base
was trying to pass side effects, we might as well be robust and
explicitly document our intentions.
* src/util/viralloc.c (virInsertElementsN): Add special case.
* src/util/viralloc.h (VIR_APPEND_ELEMENT): Use it.
(VIR_ALLOC, VIR_ALLOC_N, VIR_REALLOC_N, VIR_EXPAND_N)
(VIR_RESIZE_N, VIR_SHRINK_N, VIR_INSERT_ELEMENT)
(VIR_DELETE_ELEMENT, VIR_ALLOC_VAR, VIR_FREE): Document
which macros are safe in the presence of side effects.
* docs/hacking.html.in: Document this.
* HACKING: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
VFIO device assignment requires a cgroup ACL to be setup for access to
the /dev/vfio/nn "group" device for any devices that will be assigned
to a guest. In the case of a host device that is allocated from a
pool, it was being allocated during qemuBuildCommandLine(), which is
called by qemuProcessStart() *after* the all-encompassing
qemuSetupCgroup() was called, meaning that the standard Cgroup ACL
setup wasn't creating ACLs for these devices allocated from pools.
One possible solution was to manually add a single ACL down inside
qemuBuildCommandLine() when networkAllocateActualDevice() is called,
but that has two problems: 1) the function that adds the cgroup ACL
requires a virDomainObjPtr, which isn't available in
qemuBuildCommandLine(), and 2) we really shouldn't be doing network
device setup inside qemuBuildCommandLine() anyway.
Instead, I've created a new function called
qemuNetworkPrepareDevices() which is called just before
qemuPrepareHostDevices() during qemuProcessStart() (explanation of
ordering in the comments), i.e. well before the call to
qemuSetupCgroup(). To minimize code churn in a patch that will be
backported to 1.0.5-maint, qemuNetworkPrepareDevices only does
networkAllocateActualDevice() and the bare amount of setup required
for type='hostdev network devices, but it eventually should do *all*
device setup for guest network devices.
Note that some of the code that was previously needed in
qemuBuildCommandLine() is no longer required when
networkAllocateActualDevice() is called earlier:
* qemuAssignDeviceHostdevAlias() is already done further down in
qemuProcessStart().
* qemuPrepareHostdevPCIDevices() is called by
qemuPrepareHostDevices() which is called after
qemuNetworkPrepareDevices() in qemuProcessStart().
As hinted above, this new function should be moved into a separate
qemu_network.c (or similarly named) file along with
qemuPhysIfaceConnect(), qemuNetworkIfaceConnect(), and
qemuOpenVhostNet(), and expanded to call those functions as well, then
the nnets loop in qemuBuildCommandLine() should be reduced to only
build the commandline string (which itself can be in a separate
qemuInterfaceBuilldCommandLine() function as suggested by
Michal). However, this will require storing away an array of tapfd and
vhostfd that are needed for the commandline, so I would rather do that
in a separate patch and leave this patch at the minimum to fix the
bug.
On architectures not supporting the Intel specific programmable interval
timer, like e.g. S390, starting a domain with a clock definition containing
a pit timer results in the error "Option no-kvm-pit-reinjection not supported
for this target".
By moving the capability enablement for -no-kvm-pit-reinjection from the
InitQMPBasic section into the x86_64 and i686 only enablement section all
other architectures are no longer automatically enabled. In addition
architecture related capabilities enablements have refactored into a new
architecture bound capabilities initialization function.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
We have seen an issue on s390x platform where domain XMLs larger than 1MB
were used. The define command was finished successfully. The dumpxml command
was not successful (i.e. could not encode message payload).
Enlarged message related sizes (e.g. maximum string size, message size, etc.)
to handle larger system configurations used on s390x platform.
To improve handling of the RPC message size the allocation during encode process
is changed to a dynamic one (i.e. starting with 64kB initial size and increasing
that size in steps up to 16MB if the payload data is larger).
Signed-off-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
When attempting to generate the native command line from an XML file
that uses graphics port auto allocation, the generated commandline
wouldn't be valid.
This patch adds fake autoallocation of ports as done when starting the
actual machine.
On a mingw build, 'make distcheck' fails with:
GEN libvirt_qemu.def
make[3]: *** No rule to make target `../../src/libvirt_lxc.syms', needed by `libvirt_lxc.def'. Stop.
I traced it to a missing entry in EXTRA_DIST. But rather than keep
the entire list in sync, it is easier to list the three syms files
that drive .so files directly, and then reuse existing makefile
variables for the remaining files (that is, I validated that all
remaining files are added to SYM_FILES, possibly via USED_SYM_FILES,
according to makefile conditionals).
Problem introduced in commit 3d1596b (v1.0.2).
* src/Makefile.am (EXTRA_DIST): Ensure all syms files are shipped.
Signed-off-by: Eric Blake <eblake@redhat.com>
The code adaptation is not done right now, but in subsequent patches.
Hence I am not implementing syntax-check rule as it would break
compilation. Developers are strongly advised to use these new macros.
They are similar to VIR_ALLOC() logic: VIR_STRDUP(dst, src) returns zero
on success, -1 otherwise. In case you don't want to report OOM error,
use the _QUIET variant of a macro.
I must have looked at this a couple dozen times before I noticed it
had "!=" instead of "==". Not doing this setup prevented qemu from
doing anything with the vfio group device.
In the non linux case some callers like gather_scsi_host_caps needed the
return code of -1 while others like update_caps needed an empty
statement (to avoid a "statement without effect" warning). This is much
simpler solved by using a function instead of a define.
A 'uri' parameter was added for the benefit of sanlock. This
causes a warning in the lockd driver though
2013-05-03 13:20:35.347+0000: 28403: error : virLockManagerLockDaemonNew:482 : internal error Unexpected parameter uri for object
Ignore this parameter, since lockd does not require it and it
is harmless if not used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This should resolve https://bugzilla.redhat.com/show_bug.cgi?id=958907
Recent new addition of code to read/write active network state to the
NETWORK_STATE_DIR in the network driver broke startup for
qemu:///session. The network driver had several state file paths
hardcoded to /var, which could never possibly work in session mode.
This patch modifies *all* state files to use a variable string that is
set differently according to whether or not we're running
privileged. (It turns out that logDir was never used, so it's been
completely eliminated.)
There are very definitely other problems preventing dnsmasq and radvd
from running in non-privileged mode, but it's more consistent to have
the directories used by them be determined in the same fashion.
NB: I've noted before that the network driver is storing its state
(including dnsmasq and radvd state) in /var/lib, while qemu stores its
state in /var/run. It would probably have been better if the two
matched, but it's been this way for a long time, and changing it would
break running installations during an upgrade, so it's best to just
leave it as it is.
The QEMU migration code unconditionally sets the 'persistent'
cookie flag on the source host. The dest host, however, only
allows it during parsing if VIR_MIGRATE_PERSIST_DEST was
set. Make the source host only set it if this flag is
present.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The lockd plugin for the lock manager was not correctly
handling the release of resource locks. This meant that
during migration, or when pausing a VM, the locks would
not get released. This in turn made it impossible to
resume the domain, or finish migration
The F_DUPFD_CLOEXEC operation with fcntl() expects a single
int argument, specifying the minimum FD number for the newly
dup'd file descriptor. We were not specifying that causing
random stack data to be accessed as the FD number. Sometimes
that worked, sometimes it didn't.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
POSIX says pthread_t is opaque. We can't guarantee if it is scaler
or a pointer, nor what size it is; and BSD differs from Linux.
We've also had reports of gcc complaining on attempts to cast it,
if we use a cast to the wrong type (for example, pointers have to be
cast to void* or intptr_t before being narrowed; while casting a
function return of scalar pthread_t to void* triggers a different
warning).
Give up on casts, and use unions to get at decent bits instead. And
rather than futz around with figuring which 32 bits of a potentially
64-bit pointer are most likely to be unique, convert the rest of
the code base to use 64-bit values when using a debug id.
Based on a report by Guido Günther against kFreeBSD, but with a
fix that doesn't regress commit 4d970fd29 for FreeBSD.
* src/util/virthreadpthread.c (virThreadSelfID, virThreadID): Use
union to get at a decent bit representation of thread_t bits.
* src/util/virthread.h (virThreadSelfID, virThreadID): Alter
signature.
* src/util/virthreadwin32.c (virThreadSelfID, virThreadID):
Likewise.
* src/qemu/qemu_domain.h (qemuDomainJobObj): Alter type of owner.
* src/qemu/qemu_domain.c (qemuDomainObjTransferJob)
(qemuDomainObjSetJobPhase, qemuDomainObjReleaseAsyncJob)
(qemuDomainObjBeginNestedJob, qemuDomainObjBeginJobInternal): Fix
clients.
* src/util/virlog.c (virLogFormatString): Likewise.
* src/util/vireventpoll.c (virEventPollInterruptLocked):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
If an early dispatch check caused a jump to the 'cleanup' branch
then virTypeParamsFree() would be called with an uninitialized
'nparams' variable. Fortunately 'params' is initialized to NULL,
so the uninitialized 'nparams' variable would not be used.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The call to virReportError conditionally switched between
two format strings, with different numbers of placeholders.
This meant the format string with no placeholders was not
protected by a "%s".
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
More fallout from commit 7c9a2d88 dropping too many headers. Fixes:
In file included from ../../src/vbox/vbox_glue.c:26:0:
../../src/vbox/vbox_MSCOMGlue.c: In function 'vboxLookupVersionInRegistry':
../../src/vbox/vbox_MSCOMGlue.c:435:5: error: implicit declaration of function 'virParseVersionString' [-Werror=implicit-function-declaration]
...
../../src/vbox/vbox_driver.c: In function 'vboxConnectOpen':
../../src/vbox/vbox_driver.c:147:5: error: implicit declaration of function 'getuid' [-Werror=implicit-function-declaration]
../../src/vbox/vbox_driver.c:147:5: error: nested extern declaration of 'getuid' [-Werror=nested-externs]
* src/vbox/vbox_MSCOMGlue.c (includes): Add missing includes.
* src/vbox/vbox_driver.c (includes): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 776d49f4 added a static function that is only called
conditionally; leading to this compile error on mingw:
CC libvirt_util_la-virprocess.lo
../../src/util/virprocess.c:624:26: error: 'struct rlimit' declared inside parameter list [-Werror]
../../src/util/virprocess.c:624:26: error: its scope is only this definition or declaration, which is probably not what you want [-Werror]
../../src/util/virprocess.c:622:1: error: 'virProcessPrLimit' defined but not used [-Werror=unused-function]
* src/util/virprocess.c (virProcessPrLimit): Only declare
virProcessPrLimit when used.
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 7c9a2d88 cleaned up too many headers; FreeBSD builds
failed due to:
util/virutil.c:556: warning: implicit declaration of function 'canonicalize_file_name'
(Not sure which Linux header leaked this declaration, but gnulib
only guarantees it in stdlib.h)
libvirt.c:956: warning: implicit declaration of function 'virGetUserConfigDirectory'
(Here, a build on Linux was picking up virutil.h indirectly via
one of the conditional driver headers, where that driver was not
being built on my FreeBSD setup)
* src/util/virutil.c (includes): Need <stdlib.h> for
canonicalize_file_name.
* src/libvirt.c (includes): Use "virutil.h" unconditionally,
rather than relying on conditional indirect inclusion.
Signed-off-by: Eric Blake <eblake@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
It's not desired to force users imagine path for a socket they
are not even supposed to connect to. On the other hand, we
already have a release where the qemu agent socket path is
exposed to XML, so we cannot silently drop it from there.
The new path is generated in form:
$LOCALSTATEDIR/lib/libvirt/qemu/channel/target/$domain.$name
for qemu system mode, and
$XDG_CONFIG_HOME/qemu/lib/channel/target/$domain.$name
for qemu session mode.
virPCIDeviceReattach and virPCIDeviceUnbindFromStub (called by
virPCIDeviceReattach) had previously required the name of the stub
driver as input. This is unnecessary, because the name of the driver
the device is currently bound to can be found by looking at the link:
/sys/bus/pci/dddd:bb:ss.ff/driver
Instead of requiring that the name of the expected stub driver name
and only unbinding if that one name is matched, we no longer take a
driver name in the arglist for either of these
functions. virPCIDeviceUnbindFromStub just compares the name of the
currently bound driver to a list of "well known" stubs (right now
contains "pci-stub" and "vfio-pci" for qemu, and "pciback" for xen),
and only performs the unbind if it's one of those devices.
This allows virsh nodedevice-reattach to work properly across a
libvirtd restart, and fixes a couple of cases where we were
erroneously still hard-coding "pci-stub" as the drive name.
For some unknown reason, virPCIDeviceReattach had been calling
modprobe on the stub driver prior to unbinding the device. This was
problematic because we no longer know the name of the stub driver in
that function. However, it is pointless to probe for the stub driver
at that time anyway - because the device is bound to the stub driver,
we are guaranteed that it is already loaded, and so that call to
modprobe has been removed.
Python code generator "generate_source" section that handles
code generation to "free" inherited objects needs to generate
DISPATCH_FREE calls for all extended_by objects.
For s390 we don't want to have a default USB device generated even
if QEMU is silently tolerating -usb on the command line. This may change
in the future.
Another reason to avoid the USB controller is that it implies a PCI
bus which might cause a regression at some later point in time.
The following change will set the USB controller model to 'none'
unless a model or address has been specified, which can be the case
if a legacy definition is loaded or the XML writer knows what
she/he's doing.
Requiring the user to explicitly disable USB on systems not supporting
it seems cumbersome.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Commit eca3fdf inadvertantly caused a failure to start for any domain
with the following in its config:
<graphics type='spice' autoport='yes'/>
The problem is that when tlsPort == 0 and defaultMode == "any" (which
is the default for defaultMode), this would be flagged in the code as
"needTLSPort", and if there was then no spice tls config, the new
error+fail would happen.
This patch checks for the case of defaultMode == "any", and in that
case simply doesn't allocate a TLS port (since that's probably not
what the user wanted, and it would have failed later anyway.). It does
leave the error in place for cases when the user specifically asked to
use tls in one way or another, though.
On cygwin, compilation failed because SIOCSIFHWADDR is undefined.
* src/util/virnetdev.c (virNetDevSetMAC): Cygwin can query but not
set mac address.
Signed-off-by: Eric Blake <eblake@redhat.com>
As a result of commit id '19c345f2', 'make -C tests valgrind' has the
following for qemuxml2argvtest:
==22482== 197 (80 direct, 117 indirect) bytes in 1 blocks are definitely lost in loss record 101 of 120
==22482== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==22482== by 0x4C6F301: virAlloc (viralloc.c:124)
==22482== by 0x4C840FC: virSaveLastError (virerror.c:308)
==22482== by 0x431882: qemuBuildCommandLine (qemu_command.c:8204)
==22482== by 0x41E8F0: testCompareXMLToArgvHelper (qemuxml2argvtest.c:155)
==22482== by 0x41FE9F: virtTestRun (testutils.c:157)
==22482== by 0x419DEB: mymain (qemuxml2argvtest.c:654)
==22482== by 0x4204DA: virtTestMain (testutils.c:719)
==22482== by 0x39D0821A04: (below main) (libc-start.c:225)
==22482==
FreeBSD (and maybe other BSDs) have different member
names in struct ifreq when compared to Linux, such as:
- uses ifr_data instead of ifr_newname for setting
interface names
- uses ifr_index instead of ifr_ifindex for interface
index
Also, add a check for SIOCGIFHWADDR for virNetDevValidateConfig().
Use AF_LOCAL if AF_PACKET is not available.
Signed-off-by: Eric Blake <eblake@redhat.com>
If virPCIDeviceGetVFIOGroupDev() failed,
virSecurity*(Set|Restore)HostdevLabel() would fail to free a
virPCIDevice that had been allocated.
These leaks were all introduced (by me) very recently, in commit
f0bd70a.
libxlBuildDomainConfig() was disposing the libxl_domain_config object
on error, only to have it disposed again by libxlBuildDomainConfig()'s
caller, which resulted in a segfault. Leave disposing of the config
object to it's owner.
These fixes solve a compilation failure on FreeBSD:
util/virnetdevtap.c: In function 'virNetDevTapGetName':
util/virnetdevtap.c:56: warning: unused parameter 'tapfd' [-Wunused-parameter]
util/virnetdevtap.c:56: warning: unused parameter 'ifname' [-Wunused-parameter]
* src/util/virnetdevtap.c (virNetDevTapGetName): Add attributes
when TUNGETIFF is not present.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemuBuildMemballoonDevStr returns NULL if memballoon doesn't have
the right address type, but it doesn't report an error, leading to:
error: An error occurred, but the cause is unknown
Report a helpful error message instead, e.g.:
error: XML error: memballoon unsupported with address type 'usb'
When a user requests auto-allocation of the spice TLS port but spice TLS
is disabled in qemu.conf, we start the machine and let qemu fail instead
of erroring out sooner.
Add an error message so that this doesn't happen.
On the off-chance that creation of persistent configuration file would
fail when defining a network that is already started as transient, the
code would remove the transient data structure and thus the network.
This patch changes the code so that in such case, the network is again
marked as transient and left behind.
The USB-specific cgroup setup had been inserted inline in
qemuDomainAttachHostUsbDevice and qemuSetupCgroup, but now there is a
common cgroup setup function called for all hostdevs, so it makes sens
to put the usb-specific setup there and just rely on that function
being called.
The one thing I'm uncertain of here (and a reason for not pushing
until after release) is that previously hostdev->missing was checked
only when starting a domain (and cgroup setup for the device skipped
if missing was true), but with this consolidation, it is now checked
in the case of hotplug as well. I don't know if this will have any
practical effect (does it make sense to hotplug a "missing" usb
device?)
PCIO device assignment using VFIO requires read/write access by the
qemu process to /dev/vfio/vfio, and /dev/vfio/nn, where "nn" is the
VFIO group number that the assigned device belongs to (and can be
found with the function virPCIDeviceGetVFIOGroupDev)
/dev/vfio/vfio can be accessible to any guest without danger
(according to vfio developers), so it is added to the static ACL.
The group device must be dynamically added to the cgroup ACL for each
vfio hostdev in two places:
1) for any devices in the persistent config when the domain is started
(done during qemuSetupCgroup())
2) at device attach time for any hotplug devices (done in
qemuDomainAttachHostDevice)
The group device must be removed from the ACL when a device it
"hot-unplugged" (in qemuDomainDetachHostDevice())
Note that USB devices are already doing their own cgroup setup and
teardown in the hostdev-usb specific function. I chose to make the new
functions generic and call them in a common location though. We can
then move the USB-specific code (which is duplicated in two locations)
to this single location. I'll be posting a followup patch to do that.
Don't reserve slot 2 for video if the machine has no PCI buses.
Error out when the user specifies a video device without
a PCI address when there are no PCI buses.
(This wouldn't work on a machine with no PCI bus anyway since
we do add PCI addresses for video devices to the command line)
In the past we automatically added a USB controller and assigned
it a PCI address (0:0:1.2) even on machines without a PCI bus.
This didn't break machines with no PCI bus because the command
line for it is just '-usb', with no mention of the PCI bus.
The implicit IDE controller (reserved address 0:0:1.1) has
no command line at all.
Commit b33eb0dc removed the ability to reserve PCI addresses
on machines without a PCI bus. This made them stop working,
since there would always be the implicit USB controller.
Skip the reservation of addresses for these controllers when
there is no PCI bus, instead of failing.
This isn't strictly speaking a bugfix, but I realized I'd gotten a bit
too verbose when I chose the names for
VIR_DOMAIN_HOSTDEV_PCI_BACKEND_TYPE_*. This shortens them all a bit.
I remembered to document this bit, but somehow forgot to implement it.
This adds <driver name='kvm|vfio'/> as a subelement to the <forward>
element of a network (this puts it parallel to the match between
mode='hostdev' attribute in a network and type='hostdev' in an
<interface>).
Since it's already documented, only the parser, formatter, backend
driver recognition (it just translates/moves the flag into the
<interface> at the appropriate time), and a test case were needed.
(I used a separate enum for the values both because the original is
defined in domain_conf.h, which is unavailable from network_conf.h,
and because in the future it's possible that we may want to support
other non-hostdev oriented driver names in the network parser; this
makes sure that one can be expanded without the other).
<source type='bridge'> uses a helper application to do the necessary
TUN/TAP setup to use an existing network bridge, thus letting
unprivileged users use TUN/TAP interfaces.
However, libvirt should be preventing QEMU from running any setuid
programs at all, which would include this helper program. From
a security POV, any setuid helper needs to be run by libvirtd itself,
not QEMU.
This is what this patch does. libvirt now invokes the setuid helper,
gets the TAP fd and then passes it to QEMU in the normal manner.
The path to the helper is specified in qemu.conf.
As a small advantage, this adds a <target dev='tap0'/> element to the
XML of an active domain using <interface type='bridge'>.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will be used on a tap file descriptor returned by the bridge helper
to populate the <target> element, because the helper does not provide
the interface name.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
this patch fix the wrong sequence for fd and timeout register. the sequence
was right in dfa1e1dd for fd register, but it changed in e0622ca2.
in this patch, set priv, xl_priv in info and increase info->priv ref count
before virEventAddHandle. if do this after virEventAddHandle, the fd
callback or fd deregister maybe got the empty priv, xl_priv or wrong ref
count.
after apply this patch, test more than 100 rounds passed compare to fail
within 3 rounds without this patch. each round includes define -> start ->
destroy -> create -> suspend -> resume -> reboot -> shutdown -> save ->
resotre -> dump -> destroy -> create -> setmem -> setvcpus -> destroy.
Signed-off-by: Bamvor Jian Zhang <bjzhang@suse.com>
VFIO requires all of the guest's memory and IO space to be lockable in
RAM. The domain's max_balloon is the maximum amount of memory the
domain can have (in KiB). We add a generous 1GiB to that for IO space
(still much better than KVM device assignment, where the KVM module
actually *ignores* the process limits and locks everything anyway),
and convert from KiB to bytes.
In the case of hotplug, we are changing the limit for the already
existing qemu process (prlimit() is used under the hood), and for
regular commandline additions of vfio devices, we schedule a call to
setrlimit() that will happen after the qemu process is forked.
These were previously being set in a custom hook function, but now
that virCommand directly supports setting them, we can eliminate that
part of the hook and call the APIs directly.
This patch adds two sets of functions:
1) lower level virProcessSet*() functions that will immediately set
the RLIMIT_MEMLOCK. RLIMIT_NPROC, or RLIMIT_NOFILE of either the
current process (using setrlimit()) or any other process (using
prlimit()). "current process" is indicated by passing a 0 for pid.
2) functions for virCommand* that will setup a virCommand object to
set those limits at a later time just after it has forked a new
process, but before it execs the new program.
configure.ac has prlimit and setrlimit added to the list of functions
to check for, and the low level functions log an "unsupported" error)
on platforms that don't support those functions.
If a user cgroup name begins with "cgroup.", "_" or with any of
the controllers from /proc/cgroups followed by a dot, then they
need to be prefixed with a single underscore. eg if there is
an object "cpu.service", then this would end up as "_cpu.service"
in the cgroup filesystem tree, however, "waldo.service" would
stay "waldo.service", at least as long as nobody comes up with
a cgroup controller called "waldo".
Since we require a '.XXXX' suffix on all partitions, there is
no scope for clashing with the kernel 'tasks' and 'release_agent'
files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the partition named passed in the XML does not already have
a suffix, ensure it gets a '.partition' added to each component.
The exceptions are /machine, /user and /system which do not need
to have a suffix, since they are fixed partitions at the top
level.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Recently we changed to create VM cgroups with the naming pattern
$VMNAME.$DRIVER.libvirt. Following discussions with the systemd
community it was decided that only having a single '.' in the
names is preferrable. So this changes the naming scheme to be
$VMNAME.libvirt-$DRIVER. eg for LXC 'mycontainer.libvirt-lxc' or
for KVM 'myvm.libvirt-qemu'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Legacy kvm style pci device assignment requires changes to the
labelling of several sysfs files for each device, but for vfio device
assignment, the only thing that needs to be relabelled/chowned is the
"group" device for the group that contains the device to be assigned.
This was the only hypervisor driver other than qemu that implemented
virNodeDeviceDettach. It doesn't currently support multiple pci device
assignment driver backends, but it is simple to plug in this new API,
which will make it easier for Xen people to fill it in later when they
decide to support VFIO (or whatever other) device assignment. Also it
means that management applications will have the same API available to
them for both hypervisors on any given version of libvirt.
The only acceptable value for driverName in this case is NULL, since
there is no alternate, and I'm not willing to pick a name for the
default driver used by Xen.
The differences from virNodeDeviceDettach are very minor:
1) Check that the flags are 0.
2) Set the virPCIDevice's stubDriver according to the driverName that
is passed in.
3) Call virPCIDeviceDetach with a NULL stubDriver, indicating it
should get the name of the stub driver from the virPCIDevice
object.
This requires a custom function for remoteNodeDeviceDetachFlags,
because it is named *NodeDevice, but it goes through the hypervisor
driver rather than nodedevice driver, and so it uses privateData
instead of nodeDevicePrivateData. (It has to go through the hypervisor
driver, because that is the driver that knows about the backend drivers
that will perform the pci device assignment).
The existing virNodeDeviceDettach() assumes that there is only a
single PCI device assignment backend driver appropriate for any
hypervisor. This is no longer true, as the qemu driver is getting
support for PCI device assignment via VFIO. The new API
virNodeDeviceDetachFlags adds a driverName arg that should be set to
the exact same string set in a domain <hostdev>'s <driver name='x'/>
element (i.e. "vfio", "kvm", or NULL for default). It also adds a
flags arg for good measure (and because it's possible we may need it
when we start dealing with VFIO's "device groups").
If the config for a device has specified <driver name='vfio'/>,
"backend" in the pci part of the hostdev object will be set to
..._VFIO. In this case, when creating a virPCIDevice set the
stubDriver to "vfio-pci", otherwise set it to "pci-stub". We will rely
on the lower levels to report an error if the vfio driver isn't
loaded.
The detach/attach functions in virpci.c will pay attention to the
stubDriver setting in the device, and bind/unbind the appropriate
driver when preparing hostdevs for the domain.
Note that we don't yet attempt to do anything to mark active any other
devices in the same vfio "group" as a single device that is being
marked active. We do need to do that, but in order to get basic VFIO
functionality testing sooner rather than later, initially we'll just
live with more cryptic errors when someone tries to do that.
This can be set when the virPCIDevice is created and placed on a list,
then used later when traversing the list to determine which stub
driver to bind/unbind for managed devices.
The existing Detach and Attach functions' signatures haven't been
changed (they still accept a stub driver name in the arg list), but if
the arg list has NULL for stub driver and one is available in the
device's object, that will be used. (we may later deprecate and remove
the arg from those functions).
The device option for vfio-pci is nearly identical to that for
pci-assign - only the configfd parameter isn't supported (or needed).
Checking for presence of the bootindex parameter is done separately
from constructing the commandline, similar to how it is done for
pci-assign.
This patch contains tests to check for proper commandline
construction. It also includes tests for parser-formatter-parser
roundtrips (xml2xml), because those tests use the same data files, and
would have failed had they been included before now.
qemu: xml/args tests for VFIO hostdev and <interface type='hostdev'/>
These should be squashed in with the patch that adds commandline
handling of vfio (they would fail at any earlier time).
A domain's <interface> or <hostdev>, as well as a <network>'s
<forward>, can now have an optional <driver name='kvm|vfio'/>
element. As of this patch, there is no functionality behind this new
knob - this patch adds support to the domain and network
formatter/parser, and to the RNG and documentation.
When the backend is added, legacy KVM PCI device assignment will
continue to be used when no driver name is specified (or if <driver
name='kvm'/> is specified), but if driver name is 'vfio', the new UEFI
Secure Boot compatible VFIO device assignment will be used.
Note that the parser doesn't automatically insert the current default
value of this setting. This is done on purpose because the two
possibilities are functionally equivalent from the guest's point of
view, and we want to be able to automatically start using vfio as the
default (even for existing domains) at some time in the future. This
is similar to what was done with the "vhost" driver option in
<interface>.
There will soon be other items related to pci hostdevs that need to be
in the same part of the hostdevsubsys union as the pci address (which
is currently a single member called "pci". This patch replaces the
single member named pci with a struct named pci that contains a single
member named "addr".
QEMU_CAPS_DEVICE_VFIO_PCI is set if the device named "vfio-pci" is
supported in the qemu binary.
QEMU_CAPS_VFIO_PCI_BOOTINDEX is set if the vfio-pci device supports
the "bootindex" parameter; for some reason, the bootindex parameter
wasn't included in early versions of vfio support (qemu 1.4) so we
have to check for it separately from vfio itself.
POSIX says that both basename() and dirname() may return static
storage (aka they need not be thread-safe); and that they may but
not must modify their input argument. Furthermore, <libgen.h>
is not available on all platforms. For these reasons, you should
never use these functions in a multi-threaded library.
Gnulib instead recommends a way to avoid the portability nightmare:
gnulib's "dirname.h" provides useful thread-safe counterparts. The
obvious dir_name() and base_name() are GPL (because they malloc(),
but call exit() on failure) so we can't use them; but the LGPL
variants mdir_name() (malloc's or returns NULL) and last_component
(always points into the incoming string without modifying it,
differing from basename semantics only on corner cases like the
empty string that we shouldn't be hitting in the first place) are
already in use in libvirt. This finishes the swap over to the safe
functions.
* cfg.mk (sc_prohibit_libgen): New rule.
* src/util/vircgroup.c: Fix offenders.
* src/parallels/parallels_storage.c (parallelsPoolAddByDomain):
Likewise.
* src/parallels/parallels_network.c (parallelsGetBridgedNetInfo):
Likewise.
* src/node_device/node_device_udev.c (udevProcessSCSIHost)
(udevProcessSCSIDevice): Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskDeleteVol): Likewise.
* src/util/virpci.c (virPCIGetDeviceAddressFromSysfsLink):
Likewise.
* src/util/virstoragefile.h (_virStorageFileMetadata): Avoid false
positive.
Signed-off-by: Eric Blake <eblake@redhat.com>
Jim Fehlig reported on IRC that older gcc/glibc triggers this warning:
cc1: warnings being treated as errors
qemu/qemu_domain.c: In function 'qemuDomainDefFormatBuf':
qemu/qemu_domain.c:1297: error: declaration of 'remove' shadows a global declaration [-Wshadow]
/usr/include/stdio.h:157: error: shadowed declaration is here [-Wshadow]
make[3]: *** [libvirt_driver_qemu_impl_la-qemu_domain.lo] Error 1
Fix it like we have done in the past (such as commit 2e6322a).
* src/qemu/qemu_domain.c (qemuDomainDefFormatBuf): Avoid shadowing
a function name.
Signed-off-by: Eric Blake <eblake@redhat.com>
When all usb controllers connected to the same bus have <master
startport='x'/> specified, none of them have 'id=usb' assigned and
thus qemu fails due to invalid masterport specification (we use 'usb'
for that purpose). Adding a check that at least one of the
controllers is specified without <master startport='x'/> and in case
this happens, error out due to invalid configuration.
After 9d6e56db the syntax-check was unhappy due to wrong whitespacing:
src/qemu/qemu_command.c:1637: for ( ; a.slot < QEMU_PCI_ADDRESS_SLOT_LAST; a.slot++) {
maint.mk: incorrect whitespace around brackets, see HACKING for rules
make: *** [bracket-spacing-check] Error 1
After 78d7c3c5 we are strdup()-ing path to qemu-bridge-helper.
However, the check for its return value is missing. So it is
possible we've ignored the OOM error silently.
