libvirt/docs/kbase/memorydevices.rst
Peter Krempa fa5124bdbb docs: formatdomain: Remove 'elementsMemory' anchor
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2022-06-01 12:27:10 +02:00

151 lines
4.6 KiB
ReStructuredText

==============
Memory devices
==============
.. contents::
Basics
======
Memory devices can be divided into two families: volatile and non-volatile.
The former is typical RAM memory: it's volatile and thus its contents doesn't
survive guest reboots or power cycles. The latter retains its contents across
reboots or power outages.
In Libvirt, there are two models for volatile memory:
* ``dimm`` model:
::
<memory model='dimm'>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
<address type='dimm' slot='0'/>
</memory>
* ``virtio-mem`` model:
::
<memory model='virtio-mem'>
<target>
<size unit='KiB'>1048576</size>
<node>0</node>
<block unit='KiB'>2048</block>
<requested unit='KiB'>524288</requested>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</memory>
Then there are two models for non-volatile memory:
* ``nvdimm`` model:
::
<memory model='nvdimm'>
<source>
<path>/tmp/nvdimm</path>
</source>
<target>
<size unit='KiB'>523264</size>
<node>0</node>
</target>
<address type='dimm' slot='0'/>
</memory>
* ``virtio-pmem`` model:
::
<memory model='virtio-pmem' access='shared'>
<source>
<path>/tmp/virtio_pmem</path>
</source>
<target>
<size unit='KiB'>524288</size>
</target>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memory>
Please note that (maybe somewhat surprisingly) virtio models go onto PCI bus
instead of DIMM slots.
Furthermore, DIMMs can have ``<source/>`` element which configures backend for
devices. For NVDIMMs the element is mandatory and reflects where the content
is saved.
See `memory devices documentation <../formatdomain.html#memory-devices>`_.
``virtio-mem`` model
====================
The ``virtio-mem`` model can be viewed as revised memory balloon. It offers
adding and removing memory (without the actual hotplug of the device). It
solves problems that memory balloon can't solve on its own and thus is more
flexible than DIMM + balloon solution. ``virtio-mem`` is NUMA aware, and thus
memory can be inflated/deflated only for a subset of guest NUMA nodes. Also,
it works with chunks that are either exposed to guest or reclaimed from it.
See https://virtio-mem.gitlab.io/
Under the hood, ``virtio-mem`` device is split into chunks of equal size which
are then exposed to the guest. Either all of them or only a portion depending
on user's request. Therefore there are three important sizes for
``virtio-mem``. All are to be found under ``<target/>`` element:
#. The maximum size the device can ever offer, exposed under ``<size/>``
#. The size of a single block, exposed under ``<block/>``
#. The current size exposed to the guest, exposed under ``<requested/>``
For instance, in the following example the maximum size is 4GiB, the block size
is 2MiB and only 1GiB should be exposed to the guest:
::
<memory model='virtio-mem'>
<target>
<size unit='KiB'>4194304</size>
<block unit='KiB'>2048</block>
<requested unit='KiB'>1048576</requested>
</target>
</memory>
Please note that ``<requested/>`` must be an integer multiple of ``<block/>``
size or zero (no blocks exposed to the guest) and has to be less or equal to
``<size/>`` (all blocks exposed to the guest). Furthermore, QEMU recommends the
``<block/>`` size to be as big as a Transparent Huge Page (usually 2MiB).
To change the size exposed to the guest, users should pass memory device XML
with nothing but ``<requested/>`` changed into the
``virDomainUpdateDeviceFlags()`` API. For user's convenience this can be done
via virsh too:
::
# virsh update-memory-device $dom --requested-size 2GiB
If there are two or more ``<memory/>`` devices then ``--alias`` shall be used
to tell virsh which memory device should be updated.
For running guests there is fourth size that can be found under ``<target/>``:
::
<current unit='KiB'>2097152</current>
The ``<current/>`` reflects the current size used by the guest. In general it
can differ from ``<requested/>``. Reasons include guest kernel missing
``virtio-mem`` module and thus being unable to take offered memory, or guest
kernel being unable to free memory. Since ``<current/>`` only reports size to
users, the element is never parsed. It is formatted only into live XML.
Since changing ``<current/>`` allocation requires cooperation with guest
kernel, requests for change are not instant. Therefore, libvirt emits
``VIR_DOMAIN_EVENT_ID_MEMORY_DEVICE_SIZE_CHANGE`` event whenever current
allocation changed.