mirror of
https://gitlab.com/libvirt/libvirt.git
synced 2024-11-10 15:30:12 +00:00
0377177c78
When reconnecting to a running QEMU process, we construct the per-domain path in all hugetlbfs mounts. This is a relict from the past (v3.4.0-100-g5b24d25062) where we switched to a per-domain path and we want to create those paths when libvirtd restarts on upgrade. And with namespaces enabled there is one corner case where the path is not created. In fact an error is reported and the reconnect fails. Ideally, all mount events are propagated into the QEMU's namespace. And they probably are, except when the target path does not exist inside the namespace. Now, it's pretty common for users to mount hugetlbfs under /dev (e.g. /dev/hugepages), but if domain is started without hugepages (or more specifically - private hugetlbfs path wasn't created on domain startup), then the reconnect code tries to create it. But it fails to do so, well, it fails to set seclabels on the path because, because the path does not exist in the private namespace. And it doesn't exist because we specifically create only a subset of all possible /dev nodes. Therefore, the mount event, whilst propagated, is not successful and hence the filesystem is not mounted. We have to do it ourselves. If hugetlbfs is mount anywhere else there's no problem and this is effectively a dead code. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2123196 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
175 lines
6.8 KiB
ReStructuredText
175 lines
6.8 KiB
ReStructuredText
=============================
|
|
QEMU command-line passthrough
|
|
=============================
|
|
|
|
.. contents::
|
|
|
|
Libvirt aims to provide explicit modelling of virtualization features in
|
|
the domain XML document schema. QEMU has a very broad range of features
|
|
and not all of these can be mapped to elements in the domain XML. Libvirt
|
|
would like to reduce the gap to QEMU, however, with finite resources there
|
|
will always be cases which aren't covered by the domain XML schema.
|
|
|
|
|
|
XML document additions
|
|
======================
|
|
|
|
To deal with the problem, libvirt introduced support for command-line
|
|
passthrough of QEMU arguments. This is achieved by supporting a custom
|
|
XML namespace, under which some QEMU driver specific elements are defined.
|
|
|
|
The canonical place to declare the namespace is on the top level ``<domain>``
|
|
element. At the very end of the document, arbitrary command-line arguments
|
|
can now be added, using the namespace prefix ``qemu:``
|
|
|
|
::
|
|
|
|
<domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
|
|
<name>QEMUGuest1</name>
|
|
<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
|
|
...
|
|
<qemu:commandline>
|
|
<qemu:arg value='-newarg'/>
|
|
<qemu:arg value='parameter'/>
|
|
<qemu:env name='ID' value='wibble'/>
|
|
<qemu:env name='BAR'/>
|
|
</qemu:commandline>
|
|
</domain>
|
|
|
|
Note that when an argument takes a value eg ``-newarg parameter``, the argument
|
|
and the value must be passed as separate ``<qemu:arg>`` entries.
|
|
|
|
Instead of declaring the XML namespace on the top level ``<domain>`` it is also
|
|
possible to declare it at time of use, which is more convenient for humans
|
|
writing the XML documents manually. So the following example is functionally
|
|
identical:
|
|
|
|
::
|
|
|
|
<domain type='kvm'>
|
|
<name>QEMUGuest1</name>
|
|
<uuid>c7a5fdbd-edaf-9455-926a-d65c16db1809</uuid>
|
|
...
|
|
<commandline xmlns="http://libvirt.org/schemas/domain/qemu/1.0">
|
|
<arg value='-newarg'/>
|
|
<arg value='parameter'/>
|
|
<env name='ID' value='wibble'/>
|
|
<env name='BAR'/>
|
|
</commandline>
|
|
</domain>
|
|
|
|
Note that when querying the XML from libvirt, it will have been translated into
|
|
the canonical syntax once more with the namespace on the top level element.
|
|
|
|
Security confinement / sandboxing
|
|
=================================
|
|
|
|
When libvirt launches a QEMU process it makes use of a number of security
|
|
technologies to confine QEMU and thus protect the host from malicious VM
|
|
breakouts.
|
|
|
|
When configuring security protection, however, libvirt generally needs to know
|
|
exactly which host resources the VM is permitted to access. It gets this
|
|
information from the domain XML document. This only works for elements in the
|
|
regular schema, the arguments used with command-line passthrough are completely
|
|
opaque to libvirt.
|
|
|
|
As a result, if command-line passthrough is used to expose a file on the host
|
|
to QEMU, the security protections will activate and either kill QEMU or deny it
|
|
access.
|
|
|
|
There are two strategies for dealing with this problem, either figure out what
|
|
steps are needed to grant QEMU access to the device, or disable the security
|
|
protections. The former is harder, but more secure, while the latter is simple.
|
|
|
|
Granting access per VM
|
|
----------------------
|
|
|
|
* SELinux - the file on the host needs an SELinux label that will grant access
|
|
to QEMU's ``svirt_t`` policy.
|
|
|
|
- Read-only access - use the ``virt_content_t`` label
|
|
- Shared, write access - use the ``svirt_image_t:s0`` label (ie no Multi-
|
|
Category Security (MCS) value appended)
|
|
- Exclusive, write access - use the ``svirt_image_t:s0:MCS`` label for the VM.
|
|
The MCS is auto-generatd at boot time, so this may require re-configuring
|
|
the VM to have a fixed MCS label
|
|
|
|
* Discretionary Access Control (DAC) - the file on the host needs to be
|
|
readable/writable to the ``qemu`` user or ``qemu`` group. This can be done
|
|
by changing the file ownership to ``qemu``, or relaxing the permissions to
|
|
allow world read, or adding file ACLs to allow access to ``qemu``.
|
|
|
|
* Namespaces - a private ``mount`` namespace is used for QEMU by default
|
|
which populates a new ``/dev`` with only the device nodes needed by QEMU.
|
|
There is no way to augment the set of device nodes ahead of time.
|
|
|
|
* Seccomp - libvirt launches QEMU with its built-in seccomp policy enabled with
|
|
``obsolete=deny``, ``elevateprivileges=deny``, ``spawn=deny`` and
|
|
``resourcecontrol=deny`` settings active. There is no way to change this
|
|
policy on a per VM basis.
|
|
|
|
* Cgroups - a custom cgroup is created per VM and this will either use the
|
|
``devices`` controller or an ``BPF`` rule to define an access control list
|
|
for the set of device nodes.
|
|
There is no way to change this policy on a per VM basis.
|
|
|
|
Disabling security protection per VM
|
|
------------------------------------
|
|
|
|
Some of the security protections can be disabled per-VM:
|
|
|
|
* SELinux - in the domain XML the ``<seclabel>`` model can be changed to
|
|
``none`` instead of ``selinux``, which will make the VM run unconfined.
|
|
|
|
* DAC - in the domain XML an ``<seclabel>`` element with the ``dac`` model can
|
|
be added, configured with a user / group account of ``root`` to make QEMU run
|
|
with full privileges.
|
|
|
|
* Namespaces - there is no way to disable this per VM.
|
|
|
|
* Seccomp - there is no way to disable this per VM.
|
|
|
|
* Cgroups - there is no way to disable this per VM.
|
|
|
|
Disabling security protection host-wide
|
|
---------------------------------------
|
|
|
|
As a last resort it is possible to disable security protection host wide which
|
|
will affect all virtual machines. These settings are all made in
|
|
``/etc/libvirt/qemu.conf``
|
|
|
|
* SELinux - set ``security_default_confied = 0`` to make QEMU run unconfined by
|
|
default, while still allowing explicit opt-in to SELinux for VMs.
|
|
|
|
* DAC - set ``user = root`` and ``group = root`` to make QEMU run as the root
|
|
account.
|
|
|
|
* SELinux, DAC - set ``security_driver = []`` to entirely disable both the
|
|
SELinux and DAC security drivers.
|
|
|
|
* Namespaces - set ``namespaces = []`` to disable use of the ``mount``
|
|
namespaces, causing QEMU to see the normal fully popualated ``dev``.
|
|
|
|
* Seccomp - set ``seccomp_sandbox = 0`` to disable use of the Seccomp sandboxing
|
|
in QEMU.
|
|
|
|
* Cgroups - set ``cgroup_device_acl`` to include the desired device node, or
|
|
``cgroup_controllers = [...]`` to exclude the ``devices`` controller.
|
|
|
|
Private monunt namespace
|
|
----------------------------
|
|
|
|
As mentioned above, libvirt launches each QEMU process in its own ``mount``
|
|
namespace. It's recommended that all mount points are set up prior starting any
|
|
guest. For cases when that can't be assured, mount points in the namespace are
|
|
marked as slave so that mount events happening in the parent namespace are
|
|
propagated into this child namespace. But this may require an additional step:
|
|
mounts in the parent namespace need to be marked as shared (if the distribution
|
|
doesn't do that by default). This can be achieved by running the following
|
|
command before any guest is started:
|
|
|
|
::
|
|
|
|
# mount --make-rshared /
|