External/passt
1
0
Fork 0
mirror of https://passt.top/passt synced 2024-12-22 21:55:22 +00:00
Code Issues Packages Projects Releases Wiki Activity
36c070e6e3
passt/test/perf/pasta_udp

246 lines
6.8 KiB
Plaintext
Raw Normal View History

passt: Relicense to GPL 2.0, or any later version In practical terms, passt doesn't benefit from the additional protection offered by the AGPL over the GPL, because it's not suitable to be executed over a computer network. Further, restricting the distribution under the version 3 of the GPL wouldn't provide any practical advantage either, as long as the passt codebase is concerned, and might cause unnecessary compatibility dilemmas. Change licensing terms to the GNU General Public License Version 2, or any later version, with written permission from all current and past contributors, namely: myself, David Gibson, Laine Stump, Andrea Bolognani, Paul Holzinger, Richard W.M. Jones, Chris Kuhn, Florian Weimer, Giuseppe Scrivano, Stefan Hajnoczi, and Vasiliy Ulyanov. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-04-05 18:11:44 +00:00
# SPDX-License-Identifier: GPL-2.0-or-later
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
#
# PASST - Plug A Simple Socket Transport
# for qemu/UNIX domain socket mode
#
# PASTA - Pack A Subtle Tap Abstraction
# for network namespace/tap device mode
#
# test/perf/pasta_udp - Check UDP performance in pasta mode
#
# Copyright (c) 2021 Red Hat GmbH
# Author: Stefano Brivio <sbrivio@redhat.com>
test/perf: Use CPU frequency from /proc/cpuinfo instead of cpupower(1) Get it to work also in nested virtualisation environments. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-10-19 07:25:29 +00:00
htools bc head ip sleep iperf3 udp_rr jq sed
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
nstools ip sleep iperf3 udp_rr jq sed
conf: Allow address remapped to host to be configured Because the host and guest share the same IP address with passt/pasta, it's not possible for the guest to directly address the host. Therefore we allow packets from the guest going to a special "NAT to host" address to be redirected to the host, appearing there as though they have both source and destination address of loopback. Currently that special address is always the address of the default gateway (or none). That can be a problem if we want that gateway to be addressable by the guest. Therefore, allow the special "NAT to host" address to be overridden on the command line with a new --map-host-loopback option. In order to exercise and test it, update the passt_in_ns and perf tests to use this option and give different mapping addresses for the two layers of the environment. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-08-21 04:20:17 +00:00
set MAP_HOST4 192.0.2.1
set MAP_HOST6 2001:db8:9a55::1
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
test pasta: throughput and latency (local traffic)
test/perf: Try sourcing maximum scaling frequency from cpufreq On most recent CPUs, that's a better indication of all-core turbo frequency, or non-turbo frequency, than /proc/cpuinfo. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-10-20 23:24:22 +00:00
hout FREQ_PROCFS (echo "scale=1"; sed -n 's/cpu MHz.*: \([0-9]*\)\..*$/(\1+10^2\/2)\/10^3/p' /proc/cpuinfo) | bc -l | head -n1
hout FREQ_CPUFREQ (echo "scale=1"; printf '( %i + 10^5 / 2 ) / 10^6\n' $(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq) ) | bc -l
hout FREQ [ -n "__FREQ_CPUFREQ__" ] && echo __FREQ_CPUFREQ__ || echo __FREQ_PROCFS__
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
set THREADS 1
test: Speed up by cutting on eye candy and performance test duration We have a number of delays when we switch to new layouts that were added to make the tests visually easier to follow, together with blinking status bars. Shorten the delays and avoid blinking the status bar if $FAST is set to 1 (no demo mode). Shorten delays in busy loops to 10ms, instead of 100ms, and skip the one-second fixed delay when we wait for the status of a command. Cut the duration of throughput and latency tests to one second, down from ten. Somewhat surprisingly, the results we get are rather consistent, and not significantly different from what we'd get with 10 seconds. This, together with Podman's commit 20f3e8909e3a ("test/system: pasta_test_do add explicit port check"), cuts the time needed on my setup for full test run from approximately 37 minutes to...: $ time ./run [exited] PASS: 165, FAIL: 0 Log at /home/sbrivio/passt/test/test_logs/test.log real 15m34.253s user 0m0.011s sys 0m0.011s Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-08-14 17:25:38 +00:00
set TIME 1
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
set OPTS -u -P __THREADS__
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
info Throughput in Gbps, latency in µs, one thread at __FREQ__ GHz
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
report pasta lo_udp 1 __FREQ__
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
th pktlen 1500B 4000B 16384B 65535B
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
tr UDP throughput over IPv6: ns to host
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3s host 10003
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
# (datagram size) = (packet size) - 48: 40 bytes of IPv6 header, 8 of UDP header
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW ns ::1 10003 __TIME__ __OPTS__ -b 5G -l 1452
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 1.0 1.5
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW ns ::1 10003 __TIME__ __OPTS__ -b 10G -l 3972
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 1.2 1.8
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW ns ::1 10003 __TIME__ __OPTS__ -b 30G -l 16336
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 5.0 6.0
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW ns ::1 10003 __TIME__ __OPTS__ -b 40G -l 65487
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 7.0 9.0
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
iperf3k host
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
tl UDP RR latency over IPv6: ns to host
lat -
lat -
lat -
hostb udp_rr --nolog -P 10003 -C 10013 -6
nsout LAT udp_rr --nolog -P 10003 -C 10013 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 200 150
tr UDP throughput over IPv4: ns to host
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3s host 10003
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
# (datagram size) = (packet size) - 28: 20 bytes of IPv4 header, 8 of UDP header
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW ns 127.0.0.1 10003 __TIME__ __OPTS__ -b 5G -l 1372
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 1.0 1.5
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW ns 127.0.0.1 10003 __TIME__ __OPTS__ -b 10G -l 3972
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 1.2 1.8
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW ns 127.0.0.1 10003 __TIME__ __OPTS__ -b 30G -l 16356
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 5.0 6.0
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW ns 127.0.0.1 10003 __TIME__ __OPTS__ -b 40G -l 65507
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 7.0 9.0
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
iperf3k host
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
tl UDP RR latency over IPv4: ns to host
lat -
lat -
lat -
hostb udp_rr --nolog -P 10003 -C 10013 -4
nsout LAT udp_rr --nolog -P 10003 -C 10013 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
hostw
lat __LAT__ 200 150
tr UDP throughput over IPv6: host to ns
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3s ns 10002
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host ::1 10002 __TIME__ __OPTS__ -b 5G -l 1452
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
bw __BW__ 1.0 1.5
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host ::1 10002 __TIME__ __OPTS__ -b 10G -l 3972
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
bw __BW__ 1.2 1.8
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host ::1 10002 __TIME__ __OPTS__ -b 30G -l 16336
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
bw __BW__ 5.0 6.0
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host ::1 10002 __TIME__ __OPTS__ -b 40G -l 65487
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 7.0 9.0
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
iperf3k ns
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
tl UDP RR latency over IPv6: host to ns
lat -
lat -
lat -
nsb udp_rr --nolog -P 10002 -C 10012 -6
hout LAT udp_rr --nolog -P 10002 -C 10012 -6 -c -H ::1 | sed -n 's/^throughput=\(.*\)/\1/p'
nsw
lat __LAT__ 200 150
tr UDP throughput over IPv4: host to ns
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3s ns 10002
iperf3 BW host 127.0.0.1 10002 __TIME__ __OPTS__ -b 5G -l 1372
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
bw __BW__ 1.0 1.5
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host 127.0.0.1 10002 __TIME__ __OPTS__ -b 10G -l 3972
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
bw __BW__ 1.2 1.8
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host 127.0.0.1 10002 __TIME__ __OPTS__ -b 30G -l 16356
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
bw __BW__ 5.0 6.0
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host 127.0.0.1 10002 __TIME__ __OPTS__ -b 40G -l 65507
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 7.0 9.0
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
iperf3k ns
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
tl UDP RR latency over IPv4: host to ns
lat -
lat -
lat -
nsb udp_rr --nolog -P 10002 -C 10012 -4
hout LAT udp_rr --nolog -P 10002 -C 10012 -4 -c -H 127.0.0.1 | sed -n 's/^throughput=\(.*\)/\1/p'
nsw
lat __LAT__ 200 150
te
test pasta: throughput and latency (traffic via tap)
Don't abbreviate ip(8) arguments in examples and tests ip(8)'s ability to take abbreviated arguments (e.g. "li sh" instead of "link show") is very handy when using it interactively, but it doesn't make for very readable scripts and examples when shown that way. Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2022-06-10 02:32:42 +00:00
nsout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
info Throughput in Gbps, latency in µs, one thread at __FREQ__ GHz
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
report pasta tap_udp 1 __FREQ__
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
th pktlen 1500B 4000B 16384B 65520B
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
tr UDP throughput over IPv6: ns to host
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3s host 10003
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
# (datagram size) = (packet size) - 48: 40 bytes of IPv6 header, 8 of UDP header
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
conf: Allow address remapped to host to be configured Because the host and guest share the same IP address with passt/pasta, it's not possible for the guest to directly address the host. Therefore we allow packets from the guest going to a special "NAT to host" address to be redirected to the host, appearing there as though they have both source and destination address of loopback. Currently that special address is always the address of the default gateway (or none). That can be a problem if we want that gateway to be addressable by the guest. Therefore, allow the special "NAT to host" address to be overridden on the command line with a new --map-host-loopback option. In order to exercise and test it, update the passt_in_ns and perf tests to use this option and give different mapping addresses for the two layers of the environment. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-08-21 04:20:17 +00:00
iperf3 BW ns __MAP_HOST6__ 10003 __TIME__ __OPTS__ -b 8G -l 1472
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 0.3 0.5
conf: Allow address remapped to host to be configured Because the host and guest share the same IP address with passt/pasta, it's not possible for the guest to directly address the host. Therefore we allow packets from the guest going to a special "NAT to host" address to be redirected to the host, appearing there as though they have both source and destination address of loopback. Currently that special address is always the address of the default gateway (or none). That can be a problem if we want that gateway to be addressable by the guest. Therefore, allow the special "NAT to host" address to be overridden on the command line with a new --map-host-loopback option. In order to exercise and test it, update the passt_in_ns and perf tests to use this option and give different mapping addresses for the two layers of the environment. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-08-21 04:20:17 +00:00
iperf3 BW ns __MAP_HOST6__ 10003 __TIME__ __OPTS__ -b 12G -l 3972
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 0.5 0.8
conf: Allow address remapped to host to be configured Because the host and guest share the same IP address with passt/pasta, it's not possible for the guest to directly address the host. Therefore we allow packets from the guest going to a special "NAT to host" address to be redirected to the host, appearing there as though they have both source and destination address of loopback. Currently that special address is always the address of the default gateway (or none). That can be a problem if we want that gateway to be addressable by the guest. Therefore, allow the special "NAT to host" address to be overridden on the command line with a new --map-host-loopback option. In order to exercise and test it, update the passt_in_ns and perf tests to use this option and give different mapping addresses for the two layers of the environment. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-08-21 04:20:17 +00:00
iperf3 BW ns __MAP_HOST6__ 10003 __TIME__ __OPTS__ -b 20G -l 16356
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 3.0 4.0
conf: Allow address remapped to host to be configured Because the host and guest share the same IP address with passt/pasta, it's not possible for the guest to directly address the host. Therefore we allow packets from the guest going to a special "NAT to host" address to be redirected to the host, appearing there as though they have both source and destination address of loopback. Currently that special address is always the address of the default gateway (or none). That can be a problem if we want that gateway to be addressable by the guest. Therefore, allow the special "NAT to host" address to be overridden on the command line with a new --map-host-loopback option. In order to exercise and test it, update the passt_in_ns and perf tests to use this option and give different mapping addresses for the two layers of the environment. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-08-21 04:20:17 +00:00
iperf3 BW ns __MAP_HOST6__ 10003 __TIME__ __OPTS__ -b 30G -l 65472
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 6.0 7.0
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
iperf3k host
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
tl UDP RR latency over IPv6: ns to host
lat -
lat -
lat -
hostb udp_rr --nolog -P 10003 -C 10013 -6
conf: Allow address remapped to host to be configured Because the host and guest share the same IP address with passt/pasta, it's not possible for the guest to directly address the host. Therefore we allow packets from the guest going to a special "NAT to host" address to be redirected to the host, appearing there as though they have both source and destination address of loopback. Currently that special address is always the address of the default gateway (or none). That can be a problem if we want that gateway to be addressable by the guest. Therefore, allow the special "NAT to host" address to be overridden on the command line with a new --map-host-loopback option. In order to exercise and test it, update the passt_in_ns and perf tests to use this option and give different mapping addresses for the two layers of the environment. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-08-21 04:20:17 +00:00
nsout LAT udp_rr --nolog -P 10003 -C 10013 -6 -c -H __MAP_HOST6__ | sed -n 's/^throughput=\(.*\)/\1/p'
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
hostw
lat __LAT__ 200 150
tr UDP throughput over IPv4: ns to host
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3s host 10003
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
# (datagram size) = (packet size) - 28: 20 bytes of IPv4 header, 8 of UDP header
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
conf: Allow address remapped to host to be configured Because the host and guest share the same IP address with passt/pasta, it's not possible for the guest to directly address the host. Therefore we allow packets from the guest going to a special "NAT to host" address to be redirected to the host, appearing there as though they have both source and destination address of loopback. Currently that special address is always the address of the default gateway (or none). That can be a problem if we want that gateway to be addressable by the guest. Therefore, allow the special "NAT to host" address to be overridden on the command line with a new --map-host-loopback option. In order to exercise and test it, update the passt_in_ns and perf tests to use this option and give different mapping addresses for the two layers of the environment. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-08-21 04:20:17 +00:00
iperf3 BW ns __MAP_HOST4__ 10003 __TIME__ __OPTS__ -b 8G -l 1472
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 0.3 0.5
conf: Allow address remapped to host to be configured Because the host and guest share the same IP address with passt/pasta, it's not possible for the guest to directly address the host. Therefore we allow packets from the guest going to a special "NAT to host" address to be redirected to the host, appearing there as though they have both source and destination address of loopback. Currently that special address is always the address of the default gateway (or none). That can be a problem if we want that gateway to be addressable by the guest. Therefore, allow the special "NAT to host" address to be overridden on the command line with a new --map-host-loopback option. In order to exercise and test it, update the passt_in_ns and perf tests to use this option and give different mapping addresses for the two layers of the environment. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-08-21 04:20:17 +00:00
iperf3 BW ns __MAP_HOST4__ 10003 __TIME__ __OPTS__ -b 12G -l 3972
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 0.5 0.8
conf: Allow address remapped to host to be configured Because the host and guest share the same IP address with passt/pasta, it's not possible for the guest to directly address the host. Therefore we allow packets from the guest going to a special "NAT to host" address to be redirected to the host, appearing there as though they have both source and destination address of loopback. Currently that special address is always the address of the default gateway (or none). That can be a problem if we want that gateway to be addressable by the guest. Therefore, allow the special "NAT to host" address to be overridden on the command line with a new --map-host-loopback option. In order to exercise and test it, update the passt_in_ns and perf tests to use this option and give different mapping addresses for the two layers of the environment. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-08-21 04:20:17 +00:00
iperf3 BW ns __MAP_HOST4__ 10003 __TIME__ __OPTS__ -b 20G -l 16356
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 3.0 4.0
conf: Allow address remapped to host to be configured Because the host and guest share the same IP address with passt/pasta, it's not possible for the guest to directly address the host. Therefore we allow packets from the guest going to a special "NAT to host" address to be redirected to the host, appearing there as though they have both source and destination address of loopback. Currently that special address is always the address of the default gateway (or none). That can be a problem if we want that gateway to be addressable by the guest. Therefore, allow the special "NAT to host" address to be overridden on the command line with a new --map-host-loopback option. In order to exercise and test it, update the passt_in_ns and perf tests to use this option and give different mapping addresses for the two layers of the environment. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-08-21 04:20:17 +00:00
iperf3 BW ns __MAP_HOST4__ 10003 __TIME__ __OPTS__ -b 30G -l 65492
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
bw __BW__ 6.0 7.0
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
iperf3k host
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
tl UDP RR latency over IPv4: ns to host
lat -
lat -
lat -
hostb udp_rr --nolog -P 10003 -C 10013 -4
conf: Allow address remapped to host to be configured Because the host and guest share the same IP address with passt/pasta, it's not possible for the guest to directly address the host. Therefore we allow packets from the guest going to a special "NAT to host" address to be redirected to the host, appearing there as though they have both source and destination address of loopback. Currently that special address is always the address of the default gateway (or none). That can be a problem if we want that gateway to be addressable by the guest. Therefore, allow the special "NAT to host" address to be overridden on the command line with a new --map-host-loopback option. In order to exercise and test it, update the passt_in_ns and perf tests to use this option and give different mapping addresses for the two layers of the environment. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-08-21 04:20:17 +00:00
nsout LAT udp_rr --nolog -P 10003 -C 10013 -4 -c -H __MAP_HOST4__ | sed -n 's/^throughput=\(.*\)/\1/p'
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
hostw
lat __LAT__ 200 150
test/perf/pasta_udp: Add host to namespace cases for traffic via tap These were missing as it wasn't clear, when the other tests were introduced, if using the global address of a namespace, from the host, should have resulted in traffic being routed via the tap interface (as opposed to the loopback interface). We now clarified that's actually the case. Use same values and thresholds as the tests for loopback traffic, as throughput figures currently indicate there isn't much difference. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-01-03 23:49:07 +00:00
tr UDP throughput over IPv6: host to ns
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3s ns 10002
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
test/perf/pasta_udp: Add host to namespace cases for traffic via tap These were missing as it wasn't clear, when the other tests were introduced, if using the global address of a namespace, from the host, should have resulted in traffic being routed via the tap interface (as opposed to the loopback interface). We now clarified that's actually the case. Use same values and thresholds as the tests for loopback traffic, as throughput figures currently indicate there isn't much difference. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-01-03 23:49:07 +00:00
nsout IFNAME ip -j link show | jq -rM '.[] | select(.link_type == "ether").ifname'
test: Don't require 64-bit prefixes in perf tests When determining the namespace's IPv6 address in the perf test setup, we explicitly filter for addresses with a 64-bit prefix length. There's no real reason we need that - as long as it's a global address we can use it. I suspect this was copied without thinking from a similar example in the NDP tests, where the 64-bit prefix length _is_ meaningful (though it's not entirely clear if the handling is correct there either). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2024-11-06 01:44:14 +00:00
nsout ADDR6 ip -j -6 addr show|jq -rM '.[] | select(.ifname == "__IFNAME__").addr_info[] | select(.scope == "global").local'
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host __ADDR6__ 10002 __TIME__ __OPTS__ -b 8G -l 1472
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
bw __BW__ 0.3 0.5
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host __ADDR6__ 10002 __TIME__ __OPTS__ -b 12G -l 3972
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
bw __BW__ 0.5 0.8
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host __ADDR6__ 10002 __TIME__ __OPTS__ -b 20G -l 16356
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
bw __BW__ 3.0 4.0
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host __ADDR6__ 10002 __TIME__ __OPTS__ -b 30G -l 65472
test/perf/pasta_udp: Add host to namespace cases for traffic via tap These were missing as it wasn't clear, when the other tests were introduced, if using the global address of a namespace, from the host, should have resulted in traffic being routed via the tap interface (as opposed to the loopback interface). We now clarified that's actually the case. Use same values and thresholds as the tests for loopback traffic, as throughput figures currently indicate there isn't much difference. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-01-03 23:49:07 +00:00
bw __BW__ 7.0 9.0
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
iperf3k ns
test/perf/pasta_udp: Add host to namespace cases for traffic via tap These were missing as it wasn't clear, when the other tests were introduced, if using the global address of a namespace, from the host, should have resulted in traffic being routed via the tap interface (as opposed to the loopback interface). We now clarified that's actually the case. Use same values and thresholds as the tests for loopback traffic, as throughput figures currently indicate there isn't much difference. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-01-03 23:49:07 +00:00
tl UDP RR latency over IPv6: host to ns
lat -
lat -
lat -
nsb udp_rr --nolog -P 10002 -C 10012 -6
hout LAT udp_rr --nolog -P 10002 -C 10012 -6 -c -H __ADDR6__ | sed -n 's/^throughput=\(.*\)/\1/p'
nsw
lat __LAT__ 200 150
tr UDP throughput over IPv4: host to ns
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3s ns 10002
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
test/perf/pasta_udp: Add host to namespace cases for traffic via tap These were missing as it wasn't clear, when the other tests were introduced, if using the global address of a namespace, from the host, should have resulted in traffic being routed via the tap interface (as opposed to the loopback interface). We now clarified that's actually the case. Use same values and thresholds as the tests for loopback traffic, as throughput figures currently indicate there isn't much difference. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-01-03 23:49:07 +00:00
nsout ADDR ip -j -4 addr show|jq -rM '.[] | select(.ifname == "__IFNAME__").addr_info[0].local'
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host __ADDR__ 10002 __TIME__ __OPTS__ -b 8G -l 1472
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
bw __BW__ 0.3 0.5
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host __ADDR__ 10002 __TIME__ __OPTS__ -b 12G -l 3972
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
bw __BW__ 0.5 0.8
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host __ADDR__ 10002 __TIME__ __OPTS__ -b 20G -l 16356
test/perf: Explicitly control UDP packet length, instead of MTU Packet size can make a big difference to UDP throughput, so it makes sense to measure it for a variety of different sizes. Currently we do this by adjusting the MTU on the relevant interface before running iperf3. However, the UDP packet size has no inherent connection to the MTU - it's controlled by the sender, and the MTU just affects whether the packet will make it through or be fragmented. The only reason adjusting the MTU works is because iperf3 bases its default packet size on the (path) MTU. We can test this more simply by using the -l option to the iperf3 client to directly control the packet size, instead of adjusting the MTU. As well as simplifying this lets us test different packet sizes for host to ns traffic. We couldn't do that previously because we don't have permission to change the MTU on the host. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:30 +00:00
bw __BW__ 3.0 4.0
test: iperf3 3.16 introduces multiple threads, drop our own implementation of that Starting from iperf3 version 3.16, -P / --parallel spawns multiple clients as separate threads, instead of multiple streams serviced by the same thread. So we can drop our lib/test implementation to spawn several iperf3 client and server processes and finally simplify things quite a bit. Adjust number of threads and UDP sending bandwidth to values that seem to be more or less matching previous throughput tests on my setup. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au>
2024-07-24 20:40:32 +00:00
iperf3 BW host __ADDR__ 10002 __TIME__ __OPTS__ -b 30G -l 65492
test/perf/pasta_udp: Add host to namespace cases for traffic via tap These were missing as it wasn't clear, when the other tests were introduced, if using the global address of a namespace, from the host, should have resulted in traffic being routed via the tap interface (as opposed to the loopback interface). We now clarified that's actually the case. Use same values and thresholds as the tests for loopback traffic, as throughput figures currently indicate there isn't much difference. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-01-03 23:49:07 +00:00
bw __BW__ 7.0 9.0
test/perf: Start iperf3 server less often Currently we start both the iperf3 server(s) and client(s) afresh each time we want to make a bandwidth measurement. That's not really necessary as usually a whole batch of bandwidth measurements can use the same server. Split up the iperf3 directive into 3 directives: iperf3s to start the server, iperf3 to make a measurement and iperf3k to kill the server, so that we can start the server less often. This - and more importantly, the reduced number of waits for the server to be ready - reduces runtime of the performance tests on my laptop by about 4m (out of ~28minutes). For now we still restart the server between IPv4 and IPv6 tests. That's because in some cases the latency measurements we make in between use the same ports. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2023-11-06 07:08:28 +00:00
iperf3k ns
test/perf/pasta_udp: Add host to namespace cases for traffic via tap These were missing as it wasn't clear, when the other tests were introduced, if using the global address of a namespace, from the host, should have resulted in traffic being routed via the tap interface (as opposed to the loopback interface). We now clarified that's actually the case. Use same values and thresholds as the tests for loopback traffic, as throughput figures currently indicate there isn't much difference. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
2023-01-03 23:49:07 +00:00
tl UDP RR latency over IPv4: host to ns
lat -
lat -
lat -
nsb udp_rr --nolog -P 10002 -C 10012 -4
hout LAT udp_rr --nolog -P 10002 -C 10012 -4 -c -H __ADDR__ | sed -n 's/^throughput=\(.*\)/\1/p'
nsw
lat __LAT__ 200 150
test: Add CI/demo scripts Not really quick, definitely dirty. Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
2021-09-27 13:10:35 +00:00
te
Reference in New Issue Copy Permalink