The regular expression I used when relicensing to GPLv2+ missed this.
Fixes: ca2749e1bd ("passt: Relicense to GPL 2.0, or any later version")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We partially prepopulate IP and TCP header structures including, amongst
other things the destination address, which for IPv4 is always the known
address of the guest/namespace. We partially precompute both the IPv4
header checksum and the TCP checksum based on this.
In future we're going to want more flexibility with controlling the
destination for IPv4 (as we already do for IPv6), so this precomputed value
gets in the way. Therefore remove the IPv4 destination from the
precomputed checksum and fold it into the checksum update when we actually
send a packet.
Doing this means we no longer need to recompute those partial sums when
the destination address changes ({tcp,udp}_update_l2_buf()) and instead
the computation can be moved to compile time. This means while we perform
slightly more computations on each packet, we slightly reduce the amount of
memory we need to access.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
ns_enter() returns an integer... but it's always zero. If we actually fail
the function doesn't return. Therefore it makes more sense for this to be
a function returning void, and we can remove the cases where we pointlessly
checked its return value.
In addition ns_enter() is usually called from an ephemeral thread created
by NS_CALL(). That means that the exit(EXIT_FAILURE) there usually won't
be reported (since NS_CALL() doesn't wait() for the thread). So, use die()
instead to print out some information in the unlikely event that our
setns() here does fail.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We'll need this in isolate_initial(). While at it, don't rely on
BUFSIZ: the earlier issue we had with musl reminded me it's not a
magic "everything will fit" value. Size the read buffer to what we
actually need from uid_map, and check for the final newline too,
because uid_map is organised in lines.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In practical terms, passt doesn't benefit from the additional
protection offered by the AGPL over the GPL, because it's not
suitable to be executed over a computer network.
Further, restricting the distribution under the version 3 of the GPL
wouldn't provide any practical advantage either, as long as the passt
codebase is concerned, and might cause unnecessary compatibility
dilemmas.
Change licensing terms to the GNU General Public License Version 2,
or any later version, with written permission from all current and
past contributors, namely: myself, David Gibson, Laine Stump, Andrea
Bolognani, Paul Holzinger, Richard W.M. Jones, Chris Kuhn, Florian
Weimer, Giuseppe Scrivano, Stefan Hajnoczi, and Vasiliy Ulyanov.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
musl doesn't define those, use our own definition there. This is a
trivial implementation, similar to what's shipped by e.g. uClibc,
glibc, libiio.
Reported-by: Chris Kuhn <kuhnchris+github@kuhnchris.eu>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
...and, given that I keep getting this wrong, add a convenience
macro, MAX_FROM_BITS().
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
There are some places in passt/pasta which #include <assert.h> and make
various assertions. If we hit these something has already gone wrong, but
they're there so that we a useful message instead of cryptic misbehaviour
if assumptions we thought were correct turn out not to be.
Except.. the glibc implementation of assert() uses syscalls that aren't in
our seccomp filter, so we'll get a SIGSYS before it actually prints the
message. Work around this by adding our own ASSERT() implementation using
our existing err() function to log the message, and an abort(). The
abort() probably also won't work exactly right with seccomp, but once we've
printed the message, dying with a SIGSYS works just as well as dying with
a SIGABRT.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Update the UDP code to use the tap layer abstractions for initializing and
updating the L2 and lower headers. This will make adding other tap
backends in future easier.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We have separate IPv4 and IPv6 versions of a macro to construct an
initializer for ethernet headers. However, now that we have htons_constant
it's easy to simply paramterize this with the ethernet protocol number.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We have several places where we have fairly ugly #ifdefs on __BYTE_ORDER
where we need network order values in a constant expression (so we can't
use htons() or htonl()). We can do this more cleanly by using a single
__BYTE_ORDER ifdef to define htons_constant() and htonl_constant()
macros, then using those in all the other places.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
udp_splice_namebuf is now used only for spliced sending, and so it is
only ever populated with the localhost address, either IPv4 or IPv6.
So, replace the awkward initialization in udp_sock_handler_splice()
with statically initialized versions for IPv4 and IPv6. We then just
need to update the port number in udp_sock_handler_splice().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Spotted in Debian's buildd logs: on ia64, clone(2) is not available:
the glibc wrapper is named __clone2() and it takes, additionally,
the size of the stack area passed by the caller.
Add a do_clone() wrapper handling the different cases, and also
taking care of pointing the child's stack in the middle of the
allocated area: on PA-RISC (hppa), handled by clone(), the stack
grows up, and on ia64 the stack grows down, but the register backing
store grows up -- and I think it might be actually used here.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We recently corrected some errors handling the endianness of IPv4
addresses. These are very easy errors to make since although we mostly
store them in network endianness, we sometimes need to manipulate them in
host endianness.
To reduce the chances of making such mistakes again, change to always using
a (struct in_addr) instead of a bare in_addr_t or uint32_t to store network
endian addresses. This makes it harder to accidentally do arithmetic or
comparisons on such addresses as if they were host endian.
We introduce a number of IN4_IS_ADDR_*() helpers to make it easier to
directly work with struct in_addr values. This has the additional benefit
of making the IPv4 and IPv6 paths more visually similar.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...instead of one fourth. On the main() -> conf() -> nl_sock_init()
call path, LTO from gcc 12 on (at least) x86_64 decides to inline...
everything: nl_sock_init() is effectively part of main(), after
commit 3e2eb4337b ("conf: Bind inbound ports with
CAP_NET_BIND_SERVICE before isolate_user()").
This means we exceed the maximum stack size, and we get SIGSEGV,
under any condition, at start time, as reported by Andrea on a recent
build for CentOS Stream 9.
The calculation of NS_FN_STACK_SIZE, which is the stack size we
reserve for clones, was previously obtained by dividing the maximum
stack size by two, to avoid an explicit check on architecture (on
PA-RISC, also known as hppa, the stack grows up, so we point the
clone to the middle of this area), and then further divided by two
to allow for any additional usage in the caller.
Well, if there are essentially no function calls anymore, this is
not enough. Divide it by eight, which is anyway much more than
possibly needed by any clone()d callee.
I think this is robust, so it's a fix in some sense. Strictly
speaking, though, we have no formal guarantees that this isn't
either too little or too much.
What we should do, eventually: check cloned() callees, there are just
thirteen of them at the moment. Note down any stack usage (they are
mostly small helpers), bonus points for an automated way at build
time, quadruple that or so, to allow for extreme clumsiness, and use
as NS_FN_STACK_SIZE. Perhaps introduce a specific condition for hppa.
Reported-by: Andrea Bolognani <abologna@redhat.com>
Fixes: 3e2eb4337b ("conf: Bind inbound ports with CAP_NET_BIND_SERVICE before isolate_user()")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In a few places we use the FWRITE() macro to open a file, replace it's
contents with a given string and close it again. There's no real
reason this needs to be a macro rather than just a function though.
Turn it into a function 'write_file()' and make some ancillary
cleanups while we're there:
- Add a return code so the caller can handle giving a useful error message
- Handle the case of short write()s (unlikely, but possible)
- Add O_TRUNC, to make sure we replace the existing contents entirely
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
While building with clang:
./util.h:176:24: warning: pragma diagnostic pop could not pop, no matching push [-Wunknown-pragmas]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
If the user specifies an explicit loopback address for a port
binding, we're going to use that address for the 'tap' socket, and
the same exact address for the 'spliced' socket (because those are,
by definition, only bound to loopback addresses).
This means that the second binding will fail, and, unexpectedly, the
port is forwarded, but via tap device, which means the source address
in the namespace won't be a loopback address.
Make it explicit under which conditions we're creating which kind of
socket, by refactoring tcp_sock_init() into two separate functions
for IPv4 and IPv6 and gathering those conditions at the beginning.
Also, don't create spliced sockets if the user specifies explicitly
a non-loopback address, those are harmless but not desired either.
Fixes: 3c6ae62510 ("conf, tcp, udp: Allow address specification for forwarded ports")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Since kernel version 5.7, commit c427bfec18f2 ("net: core: enable
SO_BINDTODEVICE for non-root users"), we can bind sockets to
interfaces, if they haven't been bound yet (as in bind()).
Introduce an optional interface specification for forwarded ports,
prefixed by %, that can be passed together with an address.
Reported use case: running local services that use ports we want
to have externally forwarded:
https://github.com/containers/podman/issues/14425
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Logging to file is going to add some further complexity that we don't
want to squeeze into util.c.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Commit c318ffcb4c ("udp: Ignore bogus -Wstringop-overread for
write() from gcc 12.1") uses a gcc pragma to ignore a bogus warning,
which started appearing on gcc 12.1 (aarch64 and x86_64) due to:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103483
...but gcc 12.2 has the same issue. Not just that: if LTO is enabled,
the pragma itself is ignored (this wasn't the case with gcc 12.1),
because of:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=80922
Drop the pragma, and assign a frame (in the networking sense) pointer
from the offset of the Ethernet header in the buffer, then pass it to
write() and pcap(), so that gcc doesn't obsess anymore with the fact
that an Ethernet header is 14 bytes and we're sending more than that.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We define our own ffsl() as a weak symbol, in case our C library doesn't
include it. On glibc systems which *do* include it, this causes a cppcheck
warning because unsurprisingly our version doesn't pick the same argument
names. Convert the suppression for this into an inline suppression.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
passt/pasta contains a number of routines designed to isolate passt from
the rest of the system for security. These are spread through util.c and
passt.c. Move them together into a new isolation.c file.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Currently the logic to work out what UID and GID we will run as is spread
across conf(). If --runas is specified it's handled in conf_runas(),
otherwise it's handled by check_root(), which depends on initialization of
the uid and gid variables by either conf() itself or conf_runas().
Make this clearer by putting all the UID and GID logic into a single
conf_ugid() function.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
check_root() both checks to see if we are root (in the init namespace),
and if we are drops to an unprivileged user. To make future cleanups
simpler, split the checking for root (now in check_root()) from the actual
dropping of privilege (now in drop_root()).
Note that this does slightly alter semantics. Previously we would only
setuid() if we were originally root (in the init namespace). Now we will
always setuid() and setgid(), though it won't actually change anything if
we weren't privileged to begin with. This also means that we will now
always attempt to switch to the user specified with --runas, even if we
aren't (init namespace) root to begin with. Obviously this will fail with
an error if we weren't privileged to start with. --help and the man page
are updated accordingly.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
c->uid and c->gid are first set in conf(), and last used in check_root()
itself called from conf(). Therefore these don't need to be fields in the
long lived context structure and can instead be locals in conf().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The v4 and v6 fields of the context structure can be confusing, because
they change meaning part way through the code: Before conf_ip(), they are
booleans which indicate whether the -4 or -6 options have been given.
After conf_ip() they are DISABLED|ENABLED|PROBE enums which indicate
whether the IP version is available (which means both that it was allowed
on the command line and we were able to configure it). The PROBE variant
of the enum is only used locally within conf_ip() and since recent changes
there it no longer has a real purpose different from ENABLED.
Simplify this all by making the context fields always just a boolean
indicating the availability of the IP version. They both default to 1, but
can be set to 0 by either command line options or configuration failures.
We use some local variables in conf() for tracking the state of the command
line options on their own.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Minor coding style fix in conf.c]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
On some systems, user and group "nobody" might not be available. The
new --runas option allows to override the default "nobody" choice if
started as root.
Now that we allow this, drop the initgroups() call that was used to
add any additional groups for the given user, as that might now
grant unnecessarily broad permissions. For instance, several
distributions have a "kvm" group to allow regular user access to
/dev/kvm, and we don't need that in passt or pasta.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
With current OpenSUSE Tumbleweed on aarch64 (gcc-12-1.3.aarch64) and
on x86_64 (gcc-12-1.4.x86_64), but curiously not on armv7hl
(gcc-12-1.3.armv7hl), gcc warns about using the _pointer_ to the
802.3 header to write the whole frame to the tap descriptor:
reading between 62 and 4294967357 bytes from a region of size 14
which is bogus:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103483
Probably declaring udp_sock_fill_data_v{4,6}() as noinline would
"fix" this, but that's on the data path, so I'd rather not. Use
a gcc pragma instead.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This feature is available in slirp4netns but was missing in passt and
pasta.
Given that we don't do dynamic memory allocation, we need to bind
sockets while parsing port configuration. This means we need to
process all other options first, as they might affect addressing and
IP version support. It also implies a minor rework of how TCP and UDP
implementations bind sockets.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Implement a packet abstraction providing boundary and size checks
based on packet descriptors: packets stored in a buffer can be queued
into a pool (without storage of its own), and data can be retrieved
referring to an index in the pool, specifying offset and length.
Checks ensure data is not read outside the boundaries of buffer and
descriptors, and that packets added to a pool are within the buffer
range with valid offset and indices.
This implies a wider rework: usage of the "queueing" part of the
abstraction mostly affects tap_handler_{passt,pasta}() functions and
their callees, while the "fetching" part affects all the guest or tap
facing implementations: TCP, UDP, ICMP, ARP, NDP, DHCP and DHCPv6
handlers.
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Using events and flags instead of states makes the implementation
much more straightforward: actions are mostly centered on events
that occurred on the connection rather than states.
An example is given by the ESTABLISHED_SOCK_FIN_SENT and
FIN_WAIT_1_SOCK_FIN abominations: we don't actually care about
which side started closing the connection to handle closing of
connection halves.
Split out the spliced implementation, as it has very little in
common with the "regular" TCP path.
Refactor things here and there to improve clarity. Add helpers
to trace where resets and flag settings come from.
No functional changes intended.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...those were used when epoll references used to be socket numbers,
they should have gone away a long time ago.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
--debug can be a bit too noisy, especially as single packets or
socket messages are logged: implement a new option, --trace,
implying --debug, that enables all debug messages.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
To reach (at least) a conceptually equivalent security level as
implemented by --enable-sandbox in slirp4netns, we need to create a
new mount namespace and pivot_root() into a new (empty) mountpoint, so
that passt and pasta can't access any filesystem resource after
initialisation.
While at it, also detach IPC, PID (only for passt, to prevent
vulnerabilities based on the knowledge of a target PID), and UTS
namespaces.
With this approach, if we apply the seccomp filters right after the
configuration step, the number of allowed syscalls grows further. To
prevent this, defer the application of seccomp policies after the
initialisation phase, before the main loop, that's where we expect bad
things to happen, potentially. This way, we get back to 22 allowed
syscalls for passt and 34 for pasta, on x86_64.
While at it, move #syscalls notes to specific code paths wherever it
conceptually makes sense.
We have to open all the file handles we'll ever need before
sandboxing:
- the packet capture file can only be opened once, drop instance
numbers from the default path and use the (pre-sandbox) PID instead
- /proc/net/tcp{,v6} and /proc/net/udp{,v6}, for automatic detection
of bound ports in pasta mode, are now opened only once, before
sandboxing, and their handles are stored in the execution context
- the UNIX domain socket for passt is also bound only once, before
sandboxing: to reject clients after the first one, instead of
closing the listening socket, keep it open, accept and immediately
discard new connection if we already have a valid one
Clarify the (unchanged) behaviour for --netns-only in the man page.
To actually make passt and pasta processes run in a separate PID
namespace, we need to unshare(CLONE_NEWPID) before forking to
background (if configured to do so). Introduce a small daemon()
implementation, __daemon(), that additionally saves the PID file
before forking. While running in foreground, the process itself can't
move to a new PID namespace (a process can't change the notion of its
own PID): mention that in the man page.
For some reason, fork() in a detached PID namespace causes SIGTERM
and SIGQUIT to be ignored, even if the handler is still reported as
SIG_DFL: add a signal handler that just exits.
We can now drop most of the pasta_child_handler() implementation,
that took care of terminating all processes running in the same
namespace, if pasta started a shell: the shell itself is now the
init process in that namespace, and all children will terminate
once the init process exits.
Issuing 'echo $$' in a detached PID namespace won't return the
actual namespace PID as seen from the init namespace: adapt
demo and test setup scripts to reflect that.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
clang-tidy from LLVM 13.0.1 reports some new warnings from these
checkers:
- altera-unroll-loops, altera-id-dependent-backward-branch: ignore
for the moment being, add a TODO item
- bugprone-easily-swappable-parameters: ignore, nothing to do about
those
- readability-function-cognitive-complexity: ignore for the moment
being, add a TODO item
- altera-struct-pack-align: ignore, alignment is forced in protocol
headers
- concurrency-mt-unsafe: ignore for the moment being, add a TODO
item
Fix bugprone-implicit-widening-of-multiplication-result warnings,
though, that's doable and they seem to make sense.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Bitmap manipulating functions would otherwise refer to inconsistent
sets of bits on big-endian architectures. While at it, fix up a
couple of casts.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This is the only remaining Linux-specific include -- drop it to avoid
clang-tidy warnings and to make code more portable.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Unions and structs, you all have names now.
Take the chance to enable bugprone-reserved-identifier,
cert-dcl37-c, and cert-dcl51-cpp checkers in clang-tidy.
Provide a ffsl() weak declaration using gcc built-in.
Start reordering includes, but that's not enough for the
llvm-include-order checker yet.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
SPDX tags don't replace license files. Some notices were missing and
some tags were not according to the SPDX specification, too.
Now reuse --lint from the REUSE tool (https://reuse.software/) passes.
Reported-by: Martin Hauke <mardnh@gmx.de>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Replace libc functions that might dynamically allocate memory with own
implementations or wrappers.
Drop brk(2) from list of allowed syscalls in seccomp profile.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Move netlink routines to their own file, and use netlink to configure
or fetch all the information we need, except for the TUNSETIFF ioctl.
Move pasta-specific functions to their own file as well, add
parameters and calls to configure the tap interface in the namespace.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Based on a patch from Giuseppe Scrivano, this adds the ability to:
- specify paths and names of target namespaces to join, instead of
a PID, also for user namespaces, with --userns
- request to join or create a network namespace only, without
entering or creating a user namespace, with --netns-only
- specify the base directory for netns mountpoints, with --nsrun-dir
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
[sbrivio: reworked logic to actually join the given namespaces when
they're not created, implemented --netns-only and --nsrun-dir,
updated pasta demo script and man page]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Detecting bound ports at start-up time isn't terribly useful: do this
periodically instead, if configured.
This is only implemented for TCP at the moment, UDP is somewhat more
complicated: leave a TODO there.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If transparent huge pages are available, madvise() will do the trick.
While at it, decrease EPOLL_EVENTS for the main loop from 10 to 8,
for slightly better socket fairness.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Traffic with loopback source address will be forwarded to the direct
loopback connection in the namespace, and the tap interface is used
for the rest.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Provide an AVX2-based function using compiler intrinsics for
TCP/IP-style checksums. The load/unpack/add idea and implementation
is largely based on code from BESS (the Berkeley Extensible Software
Switch) licensed as 3-Clause BSD, with a number of modifications to
further decrease pipeline stalls and to minimise cache pollution.
This speeds up considerably data paths from sockets to tap
interfaces, decreasing overhead for checksum computation, with
16-64KiB packet buffers, from approximately 11% to 7%. The rest is
just syscalls at this point.
While at it, provide convenience targets in the Makefile for avx2,
avx2_debug, and debug targets -- these simply add target-specific
CFLAGS to the build.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Packets are received directly onto pre-cooked, static buffers
for IPv4 (with partial checksum pre-calculation) and IPv6 frames,
with pre-filled Ethernet addresses and, partially, IP headers,
and sent out from the same buffers with sendmmsg(), for both
passt and pasta (non-local traffic only) modes.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
PASTA (Pack A Subtle Tap Abstraction) provides quasi-native host
connectivity to an otherwise disconnected, unprivileged network
and user namespace, similarly to slirp4netns. Given that the
implementation is largely overlapping with PASST, no separate binary
is built: 'pasta' (and 'passt4netns' for clarity) both link to
'passt', and the mode of operation is selected depending on how the
binary is invoked. Usage example:
$ unshare -rUn
# echo $$
1871759
$ ./pasta 1871759 # From another terminal
# udhcpc -i pasta0 2>/dev/null
# ping -c1 pasta.pizza
PING pasta.pizza (64.190.62.111) 56(84) bytes of data.
64 bytes from 64.190.62.111 (64.190.62.111): icmp_seq=1 ttl=255 time=34.6 ms
--- pasta.pizza ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 34.575/34.575/34.575/0.000 ms
# ping -c1 spaghetti.pizza
PING spaghetti.pizza(2606:4700:3034::6815:147a (2606:4700:3034::6815:147a)) 56 data bytes
64 bytes from 2606:4700:3034::6815:147a (2606:4700:3034::6815:147a): icmp_seq=1 ttl=255 time=29.0 ms
--- spaghetti.pizza ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 28.967/28.967/28.967/0.000 ms
This entails a major rework, especially with regard to the storage of
tracked connections and to the semantics of epoll(7) references.
Indexing TCP and UDP bindings merely by socket proved to be
inflexible and unsuitable to handle different connection flows: pasta
also provides Layer-2 to Layer-2 socket mapping between init and a
separate namespace for local connections, using a pair of splice()
system calls for TCP, and a recvmmsg()/sendmmsg() pair for UDP local
bindings. For instance, building on the previous example:
# ip link set dev lo up
# iperf3 -s
$ iperf3 -c ::1 -Z -w 32M -l 1024k -P2 | tail -n4
[SUM] 0.00-10.00 sec 52.3 GBytes 44.9 Gbits/sec 283 sender
[SUM] 0.00-10.43 sec 52.3 GBytes 43.1 Gbits/sec receiver
iperf Done.
epoll(7) references now include a generic part in order to
demultiplex data to the relevant protocol handler, using 24
bits for the socket number, and an opaque portion reserved for
usage by the single protocol handlers, in order to track sockets
back to corresponding connections and bindings.
A number of fixes pertaining to TCP state machine and congestion
window handling are also included here.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...sharing the same filesystem. Instead of a fixed path for the UNIX
domain socket, passt now uses a path with a counter, probing for
existing instances, and picking the first free one.
The demo script is updated accordingly -- it can now be started several
times to create multiple namespaces with an instance of passt each,
with addressing reflecting separate subnets, and NDP proxying between
them.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Add support for a variable amount of DNS servers, including zero,
from /etc/resolv.conf, in DHCP, NDP and DHCPv6 implementations.
Introduce support for domain search list for DHCP (RFC 3397),
NDP (RFC 8106), and DHCPv6 (RFC 3646), also sourced from
/etc/resolv.conf.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This is in preparation for scatter-gather IO on the UDP receive path:
save a getsockname() syscall by setting a flag if we get the numbering
of all bound sockets in a strict sequence (expected, in practice) and
repurpose the tap buffer to be also a socket receive buffer, passing
it down to protocol handlers.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
As we support UDP forwarding for packets that are sent to local
ports, we actually need some kind of connection tracking for UDP.
While at it, this commit introduces a number of vaguely related fixes
for issues observed while trying this out. In detail:
- implement an explicit, albeit minimalistic, connection tracking
for UDP, to allow usage of ephemeral ports by the guest and by
the host at the same time, by binding them dynamically as needed,
and to allow mapping address changes for packets with a loopback
address as destination
- set the guest MAC address whenever we receive a packet from tap
instead of waiting for an ARP request, and set it to broadcast on
start, otherwise DHCPv6 might not work if all DHCPv6 requests time
out before the guest starts talking IPv4
- split context IPv6 address into address we assign, global or site
address seen on tap, and link-local address seen on tap, and make
sure we use the addresses we've seen as destination (link-local
choice depends on source address). Similarly, for IPv4, split into
address we assign and address we observe, and use the address we
observe as destination
- introduce a clock_gettime() syscall right after epoll_wait() wakes
up, so that we can remove all the other ones and pass the current
timestamp to tap and socket handlers -- this is additionally needed
by UDP to time out bindings to ephemeral ports and mappings between
loopback address and a local address
- rename sock_l4_add() to sock_l4(), no semantic changes intended
- include <arpa/inet.h> in passt.c before kernel headers so that we
can use <netinet/in.h> macros to check IPv6 address types, and
remove a duplicate <linux/ip.h> inclusion
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This is a reimplementation, partially building on the earlier draft,
that uses L4 sockets (SOCK_DGRAM, SOCK_STREAM) instead of SOCK_RAW,
providing L4-L2 translation functionality without requiring any
security capability.
Conceptually, this follows the design presented at:
https://gitlab.com/abologna/kubevirt-and-kvm/-/blob/master/Networking.md
The most significant novelty here comes from TCP and UDP translation
layers. In particular, the TCP state and translation logic follows
the intent of being minimalistic, without reimplementing a full TCP
stack in either direction, and synchronising as much as possible the
TCP dynamic and flows between guest and host kernel.
Another important introduction concerns addressing, port translation
and forwarding. The Layer 4 implementations now attempt to bind on
all unbound ports, in order to forward connections in a transparent
way.
While at it:
- the qemu 'tap' back-end can't be used as-is by qrap anymore,
because of explicit checks now introduced in qemu to ensure that
the corresponding file descriptor is actually a tap device. For
this reason, qrap now operates on a 'socket' back-end type,
accounting for and building the additional header reporting
frame length
- provide a demo script that sets up namespaces, addresses and
routes, and starts the daemon. A virtual machine started in the
network namespace, wrapped by qrap, will now directly interface
with passt and communicate using Layer 4 sockets provided by the
host kernel.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
With this, merd provides a fully functional IPv4 environment to
guests, requiring a single capability, CAP_NET_RAW.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
