Now that we have logging functions embedding perror() functionality,
we can make _some_ calls more terse by using them. In many places,
the strerror() calls are still more convenient because, for example,
they are used in flow debugging functions, or because the return code
variable of interest is not 'errno'.
While at it, convert a few error messages from a scant perror style
to proper failure descriptions.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
perror() prints directly to standard error, but in many cases standard
error might be already closed, or we might want to skip logging, based
on configuration. Our logging functions provide all that.
While at it, make errors more descriptive, replacing some of the
existing basic perror-style messages.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
We have several functions which are used as callbacks for NS_CALL() which
only read their void * parameter, they don't write it. The
constParameterCallback warning in cppcheck 2.14.1 complains that this
parameter could be const void *, also pointing out that that would require
casting the function pointer when used as a callback.
Casting the function pointers seems substantially uglier than using a
non-const void * as the parameter, especially since in each case we cast
the void * to a const pointer of specific type immediately. So, suppress
these errors.
I think it would make logical sense to suppress this globally, but that
would cause unmatchedSuppression errors on earlier cppcheck versions. So,
instead individually suppress it, along with unmatchedSuppression in the
relevant places.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Given that we use this stack pointer as a location to store arbitrary
data types from the cloned process, we need to guarantee that its
alignment matches any of those possible data types.
runsisi reports that pasta gets a SIGBUS in pasta_open_ns() on
aarch64, where the alignment requirement for stack pointers is a
16 bytes (same as the size of a long double), and similar requirements
actually apply to most architectures we run on.
Reported-by: runsisi <runsisi@hust.edu.cn>
Link: https://bugs.passt.top/show_bug.cgi?id=85
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
When I switched from 'uname -m' to 'gcc -dumpmachine' to fetch the
architecture name for, among others, seccomp.sh, I didn't realise
that "armv6l" and "armv7l" are just Linux kernel names -- compilers
just call that "arm".
Fix the "syscalls" annotation we use to define seccomp profiles
accordingly, otherwise pasta will be terminated on sigreturn() on
armv6l and armv7l.
Fixes: 213c397492 ("passt, pasta: Run-time selection of AVX2 build")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We watch network namespace entries to detect when we should quit
(unless --no-netns-quit is passed), and these might stored in a tmpfs
typically mounted at /run/user/UID or /var/run/user/UID, or found in
procfs at /proc/PID/ns/.
Currently, we try to use inotify for any possible location of those
entries, but inotify, of course, doesn't work on pseudo-filesystems
(see inotify(7)).
The man page reflects this: the description of --no-netns-quit
implies that we won't quit anyway if the namespace is not "bound to
the filesystem".
Well, we won't quit, but, since commit 9e0dbc8948 ("More
deterministic detection of whether argument is a PID, PATH or NAME"),
we try. And, indeed, this is harmless, as the caveat from that
commit message states.
Now, it turns out that Buildah, a tool to create container images,
sharing its codebase with Podman, passes a procfs entry to pasta, and
expects pasta to exit once the network namespace is not needed
anymore, that is, once the original container process, also spawned
by Buildah, terminates.
Get this to work by using the timer fallback mechanism if the
namespace name is passed as a path belonging to a pseudo-filesystem.
This is expected to be procfs, but I covered sysfs and devpts
pseudo-filesystems as well, because nothing actually prevents
creating this kind of directory structure and links there.
Note that fstatfs(), according to some versions of man pages, was
apparently "deprecated" by the LSB. My reasoning for using it is
essentially this:
https://lore.kernel.org/linux-man/f54kudgblgk643u32tb6at4cd3kkzha6hslahv24szs4raroaz@ogivjbfdaqtb/t/#u
...that is, there was no such thing as an LSB deprecation, and
anyway there's no other way to get the filesystem type.
Also note that, while it might sound more obvious to detect the
filesystem type using fstatfs() on the file descriptor itself
(c->pasta_netns_fd), the reported filesystem type for it is nsfs, no
matter what path was given to pasta. If we use the parent directory,
we'll typically have either tmpfs or procfs reported.
If the target namespace is given as a PID, or as a PID-based procfs
entry, we don't risk races if this PID is recycled: our handle on
/proc/PID/ns will always refer to the original namespace associated
with that PID, and we don't re-open this entry from procfs to check
it.
There's, however, a remaining race possibility if the parent process
is not the one associated to the network namespace we operate on: in
that case, the parent might pass a procfs entry associated to a PID
that was recycled by the time we parse it. This can't happen if the
namespace PID matches the one of the parent, because we detach from
the controlling terminal after parsing the namespace reference.
To avoid this type of race, if desired, we could add the option for
the parent to pass a PID file descriptor, that the parent obtained
via pidfd_open(). This is beyond the scope of this change.
Update the man page to reflect that, even if the target network
namespace is passed as a procfs path or a PID, we'll now quit when
the procfs entry is gone.
Reported-by: Paul Holzinger <pholzing@redhat.com>
Link: https://github.com/containers/podman/pull/21563#issuecomment-1948200214
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We don't know how frequently this happens, but hitting
fs.inotify.max_user_watches or similar sysctl limits is definitely
not out of question, and Paul mentioned that, for example, Podman's
CI environments hit similar issues in the past.
Introduce a fallback mechanism based on a timer file descriptor: we
grab the directory handle at startup, and we can then use openat(),
triggered periodically, to check if the (network) namespace directory
still exists. If openat() fails at some point, exit.
Link: https://github.com/containers/podman/pull/21563#issuecomment-1943505707
Reported-by: Paul Holzinger <pholzing@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
logmsg() takes printf like arguments, but because it's not a built in, the
compiler won't generate warnings if the format string and parameters don't
match. Enable those by using the format attribute.
Strictly speaking this is a gcc extension, but I believe it is also
supported by some other common compilers. We already use some other
attributes in various places. For now, just use it and we can worry about
compilers that don't support it if it comes up.
This exposes some warnings from existing callers, both in gcc and in
clang-tidy:
- Some are straight out bugs, which we correct
- It's occasionally useful to invoke the logging functions with an empty
string, which gcc objects to, so disable that specific warning in the
Makefile
- Strictly speaking the C standard requires that the parameter for a %p
be a (void *), not some other pointer type. That's only likely to cause
problems in practice on weird architectures with different sized
representations for pointers to different types. Nonetheless add the
casts to make it happy.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Newer versions of cppcheck (as of 2.12.0, at least) added a warning for
pointers which could be declared to point at const data, but aren't.
Based on that, make many pointers throughout the codebase const.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Because packets sent on the tap interface will always be going to the
guest/namespace, we more-or-less know what address they'll be going to. So
we pre-fill this destination address in our header buffers for IPv4. We
can't do the same for IPv6 because we could need either the global or
link-local address for the guest. In future we're going to want more
flexibility for the destination address, so this pre-filling will get in
the way.
Change the flow so we always fill in the IPv4 destination address for each
packet, rather than prefilling it from proto_update_l2_buf(). In fact for
TCP we already redundantly filled the destination for each packet anyway.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
epoll_ref contains a variety of information useful when handling epoll
events on our sockets, and we place it in the epoll_event data field
returned by epoll. However, for a few other things we use the 'fd' field
in the standard union of types for that data field.
This actually introduces a bug which is vanishingly unlikely to hit in
practice, but very nasty if it ever did: theoretically if we had a very
large file descriptor number for fd_tap or fd_tap_listen it could overflow
into bits that overlap with the 'proto' field in epoll_ref. With some
very bad luck this could mean that we mistakenly think an event on a
regular socket is an event on fd_tap or fd_tap_listen.
More practically, using different (but overlapping) fields of the
epoll_data means we can't unify dispatch for the various different objects
in the epoll. Therefore use the same epoll_ref as the data for the tap
fds and the netns quit fd, adding new fd type values to describe them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
We now detect errors on netlink "set" operations while configuring the
pasta namespace with --config-net. However in many cases rather than
a simple "set" we use a more complex "dup" function to copy
configuration from the host to the namespace. We're not yet properly
detecting and reporting netlink errors for that case.
Change the "dup" operations to propagate netlink errors to their
caller, pasta_ns_conf() and report them there.
Link: https://bugs.passt.top/show_bug.cgi?id=60
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Minor formatting changes in pasta_ns_conf()]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Currently if anything goes wrong while we're configuring the namespace
network with --config-net, we'll just ignore it and carry on. This might
lead to a silently unconfigured or misconfigured namespace environment.
For simple "set" operations based on nl_do() we can now detect failures
reported via netlink. Propagate those errors up to pasta_ns_conf() and
report them usefully.
Link: https://bugs.passt.top/show_bug.cgi?id=60
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Minor formatting changes in pasta_ns_conf()]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
All the netlink operations currently implicitly use one of the two global
netlink sockets, sometimes depending on an 'ns' parameter. Change them
all to explicitly take the socket to use (or two sockets to use in the case
of the *_dup() functions). As well as making these functions strictly more
general, it makes the callers easier to follow because we're passing a
socket variable with a name rather than an unexplained '0' or '1' for the
ns parameter.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Minor formatting changes in pasta_ns_conf()]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
nl_route() can perform 3 quite different operations based on the 'op'
parameter. Split this into separate functions for each one. This requires
more lines of code, but makes the internal logic of each operation much
easier to follow.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
nl_addr() can perform three quite different operations based on the 'op'
parameter, each of which uses a different subset of the parameters. Split
them up into a function for each operation. This does use more lines of
code, but the overlap wasn't that great, and the separated logic is much
easier to follow.
It's also clearer in the callers what we expect the netlink operations to
do, and what information it uses.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Minor formatting fixes in pasta_ns_conf()]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
nl_link() performs a number of functions: it can bring links up, set MAC
address and MTU and also retrieve the existing MAC. This makes for a small
number of lines of code, but high conceptual complexity: it's quite hard
to follow what's going on both in nl_link() itself and it's also not very
obvious which function its callers are intending to use.
Clarify this, by splitting nl_link() into nl_link_up(), nl_link_set_mac(),
and nl_link_get_mac(). The first brings up a link, optionally setting the
MTU, the others get or set the MAC address.
This fixes an arguable bug in pasta_ns_conf(): it looks as though that was
intended to retrieve the guest MAC whether or not c->pasta_conf_ns is set.
However, it only actually does so in the !c->pasta_conf_ns case: the fact
that we set up==1 means we would only ever set, never get, the MAC in the
nl_link() call in the other path. We get away with this because the MAC
will quickly be discovered once we receive packets on the tap interface.
Still, it's neater to always get the MAC address here.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When the open() or setns() calls fails pasta exits early and prints an
error. However it did not include the errno so it was impossible to know
why the syscall failed.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Split print to fit 80 columns in pasta_open_ns()]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Use the newly-introduced NL_DUP mode for nl_addr() to copy all the
addresses associated to the template interface in the outer
namespace, unless --no-copy-addrs (also implied by -a) is given.
This option is introduced as deprecated right away: it's not expected
to be of any use, but it's helpful to keep it around for a while to
debug any suspected issue with this change.
This is done mostly for consistency with routes. It might partially
cover the issue at:
https://bugs.passt.top/show_bug.cgi?id=47
Support multiple addresses per address family
for some use cases, but not the originally intended one: we'll still
use a single outbound address (unless the routing table specifies
different preferred source addresses depending on the destination),
regardless of the address used in the target namespace.
Link: https://bugs.passt.top/show_bug.cgi?id=47
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Similarly to what we've just done with routes, support NL_DUP for
addresses (currently not exposed): nl_addr() can optionally copy
mulitple addresses to the target namespace, by fixing up data from
the dump with appropriate flags and interface index, and repeating
it back to the kernel on the socket opened in the target namespace.
Link-local addresses are not copied: the family is set to AF_UNSPEC,
which means the kernel will ignore them. Same for addresses from a
mismatching address (pre-4.19 kernels without support for
NETLINK_GET_STRICT_CHK).
Ignore IFA_LABEL attributes by changing their type to IFA_UNSPEC,
because in general they will report mismatching names, and we don't
really need to use labels as we already know the interface index.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Use the newly-introduced NL_DUP mode for nl_route() to copy all the
routes associated to the template interface in the outer namespace,
unless --no-copy-routes (also implied by -g) is given.
This option is introduced as deprecated right away: it's not expected
to be of any use, but it's helpful to keep it around for a while to
debug any suspected issue with this change.
Otherwise, we can't use default gateways which are not, address-wise,
on the same subnet as the container, as reported by Callum.
Reported-by: Callum Parsey <callum@neoninteger.au>
Link: https://github.com/containers/podman/issues/18539
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Instead of just fetching the default gateway and configuring a single
equivalent route in the target namespace, on 'pasta --config-net', it
might be desirable in some cases to copy the whole set of routes
corresponding to a given output interface.
For instance, in:
https://github.com/containers/podman/issues/18539
IPv4 Default Route Does Not Propagate to Pasta Containers on Hetzner VPSes
configuring the default gateway won't work without a gateway-less
route (specifying the output interface only), because the default
gateway is, somewhat dubiously, not on the same subnet as the
container.
This is a similar case to the one covered by commit 7656a6f888
("conf: Adjust netmask on mismatch between IPv4 address/netmask and
gateway"), and I'm not exactly proud of that workaround.
We also have:
https://bugs.passt.top/show_bug.cgi?id=49
pasta does not work with tap-style interface
for which, eventually, we should be able to configure a gateway-less
route in the target namespace.
Introduce different operation modes for nl_route(), including a new
NL_DUP one, not exposed yet, which simply parrots back to the kernel
the route dump for a given interface from the outer namespace, fixing
up flags and interface indices on the way, and requesting to add the
same routes in the target namespace, on the interface we manage.
For n routes we want to duplicate, send n identical netlink requests
including the full dump: routes might depend on each other and the
kernel processes RTM_NEWROUTE messages sequentially, not atomically,
and repeating the full dump naturally resolves dependencies without
the need to actually calculate them.
I'm not kidding, it actually works pretty well.
Link: https://github.com/containers/podman/issues/18539
Link: https://bugs.passt.top/show_bug.cgi?id=49
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
In pasta_wait_for_ns(), open() failing with ENOENT is expected: we're
busy-looping until the network namespace appears. But any other
failure is not something we're going to recover from: return right
away if we don't get either success or ENOENT.
Now that pasta_wait_for_ns() can actually fail, handle that in
pasta_start_ns() by reporting the issue and exiting.
Looping on EPERM, when pasta doesn't actually have the permissions to
join a given namespace, isn't exactly a productive thing to do.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If we want /proc contents to be consistent after pasta spawns a child
process in a new PID namespace (only for operation without a
pre-existing namespace), we need to mount /proc after the clone(2)
call with CLONE_NEWPID, and we enable the child to do that by
passing, in the same call, the CLONE_NEWNS flag, as described by
pid_namespaces(7).
This is not really a remount: in fact, passing MS_REMOUNT to mount(2)
would make the call fail. We're in another mount namespace now, so
it's a fresh mount that has the effect of hiding the existing one.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
In practical terms, passt doesn't benefit from the additional
protection offered by the AGPL over the GPL, because it's not
suitable to be executed over a computer network.
Further, restricting the distribution under the version 3 of the GPL
wouldn't provide any practical advantage either, as long as the passt
codebase is concerned, and might cause unnecessary compatibility
dilemmas.
Change licensing terms to the GNU General Public License Version 2,
or any later version, with written permission from all current and
past contributors, namely: myself, David Gibson, Laine Stump, Andrea
Bolognani, Paul Holzinger, Richard W.M. Jones, Chris Kuhn, Florian
Weimer, Giuseppe Scrivano, Stefan Hajnoczi, and Vasiliy Ulyanov.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This actually leaves us with 0 uses of err(), but someone could want
to use it in the future, so we may as well leave it around.
Signed-off-by: Laine Stump <laine@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Exits codes are very useful for scripts, when the pasta child execvp()
call fails with ENOENT that parent should also exit with > 0. In short
the parent should always exit with the code from the child to make it
useful in scripts.
It is easy to test with: `pasta -- bash -c "exit 3"; echo $?`
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
By default clone() will create a child that does not send SIGCHLD when
the child exits. The caller has to specifiy the SIGNAL it should get in
the flag bitmask.
see clone(2) under "The child termination signal"
This fixes the problem where pasta would not exit when the execvp()
call failed, i.e. when the command does not exists.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Adapted from a patch by Paul Holzinger: when pasta spawns a command,
operating without a pre-existing user and network namespace, it needs
to wait for the tap device to be configured and its handler ready,
before the command is actually executed.
Otherwise, something like:
pasta --config-net nslookup passt.top
usually fails as the nslookup command is issued before the network
interface is ready.
We can't adopt a simpler approach based on SIGSTOP and SIGCONT here:
the child runs in a separate PID namespace, so it can't send SIGSTOP
to itself as the kernel sees the child as init process and blocks
the delivery of the signal.
We could send SIGSTOP from the parent, but this wouldn't avoid the
possible condition where the child isn't ready to wait for it when
the parent sends it, also raised by Paul -- and SIGSTOP can't be
blocked, so it can never be pending.
Use SIGUSR1 instead: mask it before clone(), so that the child starts
with it blocked, and can safely wait for it. Once the parent is
ready, it sends SIGUSR1 to the child. If SIGUSR1 is sent before the
child is waiting for it, the kernel will queue it for us, because
it's blocked.
Reported-by: Paul Holzinger <pholzing@redhat.com>
Fixes: 1392bc5ca0 ("Allow pasta to take a command to execute")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Spotted in Debian's buildd logs: on ia64, clone(2) is not available:
the glibc wrapper is named __clone2() and it takes, additionally,
the size of the stack area passed by the caller.
Add a do_clone() wrapper handling the different cases, and also
taking care of pointing the child's stack in the middle of the
allocated area: on PA-RISC (hppa), handled by clone(), the stack
grows up, and on ia64 the stack grows down, but the register backing
store grows up -- and I think it might be actually used here.
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There are several minor problems with our parsing of IPv4 netmasks (-n).
First, we don't reject nonsensical netmasks like 0.255.0.255. Address this
structurally by using prefix length instead of netmask as the primary
variable, only converting (and validating) when we need to. This has the
added benefit of making some things more uniform with the IPv6 path.
Second, when the user specifies a prefix length, we truncate the output
from strtol() to an integer, which means we would treat -n 4294967320 as
valid (equivalent to 24). Fix types to check for this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
pasta_setup_ns() no longer has much to do with setting up a namespace.
Instead it's really about starting the shell or other command we want to
run with pasta connectivity. Rename it and its argument structure to be
less misleading.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When in passt mode, or pasta mode spawning a command, we create a userns
for ourselves. This is used both to isolate the pasta/passt process itself
and to run the spawned command, if any.
Since eed17a47 "Handle userns isolation and dropping root at the same time"
we've handled both cases the same, configuring the UID and GID mappings in
the new userns to map whichever UID we're running as to root within the
userns.
This mapping is desirable when spawning a shell or other command, so that
the user gets a root shell with reasonably clear abilities within the
userns and netns. It's not necessarily essential, though. When not
spawning a shell, it doesn't really have any purpose: passt itself doesn't
need to be root and can operate fine with an unmapped user (using some of
the capabilities we get when entering the userns instead).
Configuring the uid_map can cause problems if passt is running with any
capabilities in the initial namespace, such as CAP_NET_BIND_SERVICE to
allow it to forward low ports. In this case the kernel makes files in
/proc/pid owned by root rather than the starting user to prevent the user
from interfering with the operation of the capability-enhanced process.
This includes uid_map meaning we are not able to write to it.
Whether this behaviour is correct in the kernel is debatable, but in any
case we might as well avoid problems by only initializing the user mappings
when we really want them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
In a few places we use the FWRITE() macro to open a file, replace it's
contents with a given string and close it again. There's no real
reason this needs to be a macro rather than just a function though.
Turn it into a function 'write_file()' and make some ancillary
cleanups while we're there:
- Add a return code so the caller can handle giving a useful error message
- Handle the case of short write()s (unlikely, but possible)
- Add O_TRUNC, to make sure we replace the existing contents entirely
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
drop_caps() has a number of bugs which mean it doesn't do what you'd
expect. However, even if we fixed those, the call in pasta_start_ns()
doesn't do anything useful:
* In the common case, we're UID 0 at this point. In this case drop_caps()
doesn't accomplish anything, because even with capabilities dropped, we
are still privileged.
* When attaching to an existing namespace with --userns or --netns-only
we might not be UID 0. In this case it's too early to drop all
capabilities: we need at least CAP_NET_ADMIN to configure the
tap device in the namespace.
Remove this call - we will still drop capabilities a little later in
sandbox().
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
The end of pasta_start_ns() has a test against pasta_child_pid, testing
if we're in the parent or the child. However we started the child running
the pasta_setup_ns function which always exec()s or exit()s, so if we
return from the clone() we are always in the parent, making that test
unnecessary.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
When invoked so as to spawn a shell, pasta checks explicitly for the
shell being bash and if so, adds a "-l" option to make it a login shell.
This is not ideal, since this is a bash specific option and requires pasta
to know about specific shell variants.
There's a general convention for starting a login shell, which is to
prepend a "-" to argv[0]. Use this approach instead, so we don't need bash
specific logic.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Logging to file is going to add some further complexity that we don't
want to squeeze into util.c.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
clang-tidy isn't quite clever enough to figure out that getenv("SHELL")
will return the same thing both times here, which makes it conclude that
shell could be NULL, causing problems later.
It's a bit ugly that we call getenv() twice in any case, so rework this in
a way that clang-tidy can figure out shell won't be NULL.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
passt/pasta can interact with user namespaces in a number of ways:
1) With --netns-only we'll remain in our original user namespace
2) With --userns or a PID option to pasta we'll join either the given
user namespace or that of the PID
3) When pasta spawns a shell or command we'll start a new user namespace
for the command and then join it
4) With passt we'll create a new user namespace when we sandbox()
ourself
However (3) and (4) turn out to have essentially the same effect. In both
cases we create one new user namespace. The spawned command starts there,
and passt/pasta itself will live there from sandbox() onwards.
Because of this, we can simplify user namespace handling by moving the
userns handling earlier, to the same point we drop root in the original
namespace. Extend the drop_user() function to isolate_user() which does
both.
After switching UID and GID in the original userns, isolate_user() will
either join or create the userns we require. When we spawn a command with
pasta_start_ns()/pasta_setup_ns() we no longer need to create a userns,
because we're already made one. sandbox() likewise no longer needs to
create (or join) an userns because we're already in the one we need.
We no longer need c->pasta_userns_fd, since the fd is only used locally
in isolate_user(). Likewise we can replace c->netns_only with a local
in conf(), since it's not used outside there.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
--netns-only is supposed to make pasta use only a network namespace, not
a user namespace. However, pasta_start_ns() has this backwards, and if
--netns-only is specified it creates a user namespace but *not* a network
namespace. Correct this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
conf_ns_open() opens file descriptors for the namespaces pasta needs, but
it doesnt really have anything to do with configuration any more. For
better clarity, move it to pasta.c and rename it pasta_open_ns(). This
makes the symmetry between it and pasta_start_ns() more clear, since these
represent the two basic ways that pasta can operate, either attaching to
an existing namespace/process or spawning a new one.
Since its no longer validating options, the errors it could return
shouldn't cause a usage message. Just exit directly with an error instead.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
passt/pasta contains a number of routines designed to isolate passt from
the rest of the system for security. These are spread through util.c and
passt.c. Move them together into a new isolation.c file.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When not given an existing PID or network namspace to attach to, pasta
spawns a shell. Most commands which can spawn a shell in an altered
environment can also run other commands in that same environment, which can
be useful in automation.
Allow pasta to do the same thing; it can be given an arbitrary command to
run in the network and user namespace which pasta creates. If neither a
command nor an existing PID or netns to attach to is given, continue to
spawn a default shell, as before.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
There are several places in the passt code where we have lint overrides
because we're not adding CLOEXEC flags to open or other operations.
Comments suggest this is because it's before we fork() into the background
but we'll need those file descriptors after we're in the background.
However, as the name suggests CLOEXEC closes on exec(), not on fork(). The
only place we exec() is either super early invoke the avx2 version of the
binary, or when we start a shell in pasta mode, which certainly *doesn't*
require the fds in question.
Add the CLOEXEC flag in those places, and remove the lint overrides.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The context structure contains a batch of fields specific to IPv4 and to
IPv6 connectivity. Split those out into a sub-structure.
This allows the conf_ip4() and conf_ip6() functions, which take the
entire context but touch very little of it, to be given more specific
parameters, making it clearer what it affects without stepping through the
code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
After recent changes, conf_ip() now has essentially entirely disjoint paths
for IPv4 and IPv6 configuration. So, it's cleaner to split them out into
different functions conf_ip4() and conf_ip6().
Splitting these out also lets us make the interface a bit nicer, having
them return success or failure directly, rather than manipulating c->v4
and c->v6 to indicate success/failure of the two versions.
Since these functions may also initialize the interface index for each
protocol, it turns out we can then drop c->v4 and c->v6 entirely, replacing
tests on those with tests on whether c->ifi4 or c->ifi6 is non-zero (since
a 0 interface index is never valid).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: Whitespace fixes]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
It looks like glibc commonly implements clock_gettime(2) with
clock_gettime64(), and uses recv() instead of recvfrom(), send()
instead of sendto(), and sigreturn() instead of rt_sigreturn() on
armv6l and armv7l.
Adjust the list of system calls for armv6l and armv7l accordingly.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
