With current OpenSUSE Tumbleweed on aarch64 (gcc-12-1.3.aarch64) and
on x86_64 (gcc-12-1.4.x86_64), but curiously not on armv7hl
(gcc-12-1.3.armv7hl), gcc warns about using the _pointer_ to the
802.3 header to write the whole frame to the tap descriptor:
reading between 62 and 4294967357 bytes from a region of size 14
which is bogus:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103483
Probably declaring udp_sock_fill_data_v{4,6}() as noinline would
"fix" this, but that's on the data path, so I'd rather not. Use
a gcc pragma instead.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Having all those 'echo $?' is rather distracting in demos.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Sefano Brivio <sbrivio@redhat.com>
...there are no 'test' directives in demo, and this causes a
script failure.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
'sleep' always needs an argument, this was meant to introduce
a 2 seconds delay.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There's no need to return non-zero if there have been failures in
run(), because the exit value is already determined from the number
of failures reported in the log file.
Return zero, so that this doesn't cause the script to fail, given we
now run it with -e.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
There are a few occurrences of this assignment, which are needed to
re-add ::1 as loopback address after the MTU has been increased
back from a value below 1280 bytes.
This one, however, is redundant, and causes an error in the
execution.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
A number of individual test cases use '*out' commands to check for success
of specific commands they've issued. Now that the test harness is testing
for success of all issued commands as a matter of course, we no longer need
to do this.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that we have pane_status to check the success of commands issued to
panes, we can more easily check for the success of the 'which' commands
used to check tool availability, rather than constructing, then parsing
special "skip" output.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
When we use pane_wait to wait for a command issued to a tmux pane to finish
we have no idea whether the command succeeded or not. This means that the
test scripts can keep running long after the point something vital has
failed, making it difficult to work out what went wrong.
Add a new pane_status command that checks for success of the issued command
and use it in most places instead of pane_wait. We still need explicit
pane_wait where we're gathering explicit output with pane_parse, because
the way we check the status with 'echo $?' means we lose track of that
output.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio:
- instead of quitting the script, make a test fail if a command
issued in a pane fails during a test, and loop until the status code is
numeric in pane_status() as a hack to make it a bit more robust
- retain usage of pane_wait() in iperf3 and teardown functions as we
interrupt iperf3, passt, and pasta, so a non-zero exit code is expected
- drop bogus ns_{1,2}_wait() calls in teardown_two_guests(), those
functions were never implemented
- use pane_status() for "guest" test directives too
]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Most commands issued during the testing scripts aren't explicitly checked
for errors. Therefore, if they fail, the shell will just keep on
executing. This makes it difficult to figure out where things started
going wrong if things fall over.
Run the whole script with the set -e mode so that it will exit in the case
of any (unchecked) failing command. To make this work we do need to add
explicit checks / fallbacks for some commands which we expect to fail.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: use sh -e instead of setting -e later, so that we don't miss
anything before set -e is issued]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
pane_parse() attempts to grab the output from the last command issued
into a tmux pane. It strips out control characters using tr, which in
particular includes the final \r\n. However, this won't fully strip
out terminal escape sequences. In particular this breaks if the shell
in the pane is bash, with enable-bracketed-paste enabled in readline.
That issues terminal sequences to enable and disable bracketed paste
mode around every shell prompt.
We can work around this because these escapes are followed by a \r
(CR). More generally, it seems reasonable to assume that any terminal
shenanigans followed by a CR, but not an LF is supposed to be hidden.
So, use sed to strip everything before the second last CR. We still
need the tr to remove the final \r\n from the string (sed processes a
line at a time, and doesn't consider the CRLF part of the buffer it's
processing).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[sbrivio: modify regexp to keep foo\r\r\n unchanged, by matching on at
least one CR and a non-CR afterwards: that's the usual output pattern
for bash on Debian 8 and Debian 9]
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
run_term() uses tmux set-option -g to globally set the default shell.
Unfortunately this hits a chicken-and-egg problem that's common with many
of tmux's session options. If there isn't already a tmux server running,
we can't connect to set the option. If we attempt this after starting our
session (and therefore the server), then the session will already be
started with the previous default shell.
In any case it's not a good idea to set tmux global options, since that
might interfere with whatever else the user is doing in tmux. So, instead
set the default-shell option locally to the session after starting it. To
make sure we get the right shell for our initial script, explicitly invoke
/bin/sh to interpret it.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The semantics of tmux's update-environment option are a bit confusing.
It says it means the given variables are copied into the session
environment from the source environment, but it's not entirely clear
what the "source" environment means.
From my experimentation it appeast to be the environment from which
the tmux *server* is launched, not the one issuing the 'new-session'
command. That makes it pretty much useles, certainly in our case where
we have no way of knowing if the user has pre-existing tmux sessions.
Instead use the new-session -e option to explicitly pass in the variables
we want to propagate.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The DEBUG option for tests/run enables debugging options to passt/pasta,
however that doesn't help with debugging the test scripts themselves, which
are fairly fragile.
Extend the DEBUG option so it also prints information on each command in
the test scripts to make it easier to work out where things are falling
over.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The XVFB variable is initialized at the beginning of test/run then never
used again. I'm assuming it's a leftover from some ealier iteration.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Ignore various files generated during build or test.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reflect the recent changes in the Podman adaptation (no port
forwarding by default).
It turns out that by running two iperf3 processes, sometimes
slirp4netns blocks the second connection until the first test is
done, thus doubling the throughput. Use a single process for
slirp4netns with slirp4netns port handling.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Rebase the patch for Podman on top of current upstream, and:
- add support for configuration of specific addresses for forwarded
ports
- by default, disable port forwarding, and reflect this in the man
page changes
- adjust processing to a new, incompatible format for port storage,
which I couldn't actually track down to a specific commit, but
that resulted in https://github.com/containers/podman/issues/13643
and commit eedaaf33cdbf ("fix slirp4netns port forwarding with
ranges")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This feature is available in slirp4netns but was missing in passt and
pasta.
Given that we don't do dynamic memory allocation, we need to bind
sockets while parsing port configuration. This means we need to
process all other options first, as they might affect addressing and
IP version support. It also implies a minor rework of how TCP and UDP
implementations bind sockets.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reported by Coverity: if we fail to run the AVX2 version, once
execve() fails, we had already replaced argv[0] with the new
stack-allocated path string, and that's then passed back to
main(). Use a static variable instead.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Not an actual issue due to how it's typically stored, but udp_act
can also be used for ports 65528-65535. Reported by Coverity.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reported by Coverity: it doesn't see that tcp{4,6}_l2_buf_used are
set to zero by tcp_l2_data_buf_flush(), repeat that explicitly here.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
This really just needs to be an assignment before line_read() --
turn it into a for loop. Reported by Coverity.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
All instances were harmless, but it might be useful to have some
debug messages here and there. Reported by Coverity.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Field doff in struct tcp_hdr is 4 bits wide, so optlen in
tcp_tap_handler() is already bound, but make that explicit.
Reported by Coverity.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
...using dh_apparmor to ship and apply AppArmor profiles. Tried on
current Debian testing (Bookworm, 12).
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
read() will return zero if we pass a zero length, which makes no
sense: instead, track explicitly that we exhausted the buffer, flush
packets to handlers and redo.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
If the tun interface disappears, we'll call tap_ns_tun() after the
seccomp profile is applied: add ioctl() and openat() to it.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
