This commit implements the `get_device_attr` method for the
`KVM_GET_DEVICE_ATTR` ioctl. This ioctl will be used in retrieving
the GIC status.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit adds methods to save/restore AArch64 vCPU registers,
including:
1. The AArch64 `VcpuKvmState` structure.
2. Some `Vcpu` trait methods of the `KvmVcpu` structure to
enable the save/restore of the AArch64 vCPU states.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit ports code from firecracker and refactors the existing
AArch64 code as the preparation for implementing save/restore
AArch64 vCPU, including:
1. Modification of `arm64_core_reg` macro to retrive the index of
arm64 core register and implemention of a helper to determine if
a register is a system register.
2. Move some macros and helpers in `arch` crate to the `hypervisor`
crate.
3. Added related unit tests for above functions and macros.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Currently we don't need to do anything to service these exits but when
the synthetic interrupt controller is active an exit will be triggered
to notify the VMM of details of the synthetic interrupt page.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The new function already checks if the API version is compatible. There
is no need to expose the get_api_version function to code outside
hypervisor crate.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
We may need to store hypervisor speciific data to the VM. This support is
needed for Microsoft hyperv implementations. This patch introduces two
new definitions to Vm trait and implements for KVM.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Based on the way KVM_GET_MSRS and KVM_SET_MSRS work, both function are
very unlikely to fail, as they simply stop looping through the list of
MSRs as soon as getting or setting one fails. This is causing some
issues with the snapshot/restore feature, as on some platforms, we only
save a subset of the list of MSRs, leading to unproper way of saving the
VM.
The way to address this issue is by checking the number of MSRs get/set
matches the expected amount from the list. In case it does not match, we
simply ignore the failing MSR and continue getting/setting the rest of
the list. By doing this by iterations, we end up getting/setting as many
MSRs as the platform can support.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Make set_gsi_routing take a list of IrqRoutingEntry. The construction of
hypervisor specific structure is left to set_gsi_routing.
Now set_gsi_routes, which is part of the interrupt module, is only
responsible for constructing a list of routing entries.
This further splits hypervisor specific code from hypervisor agnostic
code.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
That function is going to return a handle for passthrough related
operations.
Move create_kvm_device code there.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
It returns an hypervisor object depending on which hypervisor is
configured. Currently it only supports KVM.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
The support for SGX is exposed to the guest through CPUID 0x12. KVM
passes static subleaves 0 and 1 from the host to the guest, without
needing any modification from the VMM itself.
But SGX also relies on dynamic subleaves 2 through N, used for
describing each EPC section. This is not handled by KVM, which means
the VMM is in charge of setting each subleaf starting from index 2
up to index N, depending on the number of EPC sections.
These subleaves 2 through N are not listed as part of the supported
CPUID entries from KVM. But it's important to set them as long as index
0 and 1 are present and indicate that SGX is supported.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In this commit we saved the BDF of a PCI device and set it to "devid"
in GSI routing entry, because this field is mandatory for GICv3-ITS.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
It gets bubbled all the way up from hypervsior crate to top-level
Cargo.toml.
Cloud Hypervisor can't function without KVM at this point, so make it
a default feature.
Fix all scripts that use --no-default-features.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
In order to move the hypervisor specific parts of the VM exit handling
path, we're defining a generic, hypervisor agnostic VM exit enum.
This is what the hypervisor's Vcpu run() call should return when the VM
exit can not be completely handled through the hypervisor specific bits.
For KVM based hypervisors, this means directly forwarding the IO related
exits back to the VMM itself. For other hypervisors that e.g. rely on the
VMM to decode and emulate instructions, this means the decoding itself
would happen in the hypervisor crate exclusively, and the rest of the VM
exit handling would be handled through the VMM device model implementation.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Fix test_vm unit test by using the new abstraction and dropping some
dead code.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
On x86 architecture, we need to save a list of MSRs as part of the vCPU
state. By providing the full list of MSRs supported by KVM, this patch
fixes the remaining snapshot/restore issues, as the vCPU is restored
with all its previous states.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add a new function to the hypervisor trait so that the caller can
retrieve the list of MSRs supported by this hypervisor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Some vCPU states such as MP_STATE can be modified while retrieving
other states. For this reason, it's important to follow a specific
order that will ensure a state won't be modified after it has been
saved. Comments about ordering requirements have been copied over
from Firecracker commit 57f4c7ca14a31c5536f188cacb669d2cad32b9ca.
This patch also set the previously saved VCPU_EVENTS, as this was
missing from the restore codepath.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Initially the licensing was just Apache-2.0. This patch changes
the licensing to dual license Apache-2.0 OR BSD-3-Clause
Signed-off-by: Muminul Islam <muislam@microsoft.com>
When set_user_memory_region was moved to hypervisor crate, it was turned
into a safe function that wrapped around an unsafe call. All but one
call site had the safety statements removed. But safety statement was
not moved inside the wrapper function.
Add the safety statement back to help reasoning in the future. Also
remove that one last instance where the safety statement is not needed .
No functional change.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This commit fixes some warnings introduced in the previous
hyperviosr crate PR.Removed some unused variables from arch/aarch64
module.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Implement the vCPU state getter and setter separately from the initial
KVM Hypervisor trait implementation, mostly for readability purposes.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
For each of the traits we are defining kvm related structures
and add the trait implementation to the structs. For more information
please see the kvm-ioctls and kvm-bindings crate.
This is a standalone implementation that does not include the switch of
the Cloud-Hypervisor vmm and arch crates to it.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
As the only hypervisor that Cloud-Hypervisor supports is KVM, the
Hypervisor trait accomodates for the upcoming KVM implementation.
This trait will be instanciated at build time through hypervisor
specific features, i.e. it's not aiming at run-time selection of
hypervisors for Cloud-Hypervisor.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This VM trait should be implemented by each underlying hypervisor.
Previously created hypervisor object should create the VM based on
already selected hypervisor. This is just the trait definition. For each
of supported hypervisor we need to implement the trait. Later we will
implement this trait for KVM and then Microsoft Hyper-V.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This Vcpu trait should be implemented by each underlying hypervisor.
Previously created hypervisor object should create the VM based on
already selected hypervisor and Vm object should create this vcpu
object based on same hyperviosr. Each of this object should be
referenced by trait object i.e <dyn Vcpu>.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The purpose of this trait is to add support for other hypervisors than
KVM, like e.g. Microsoft Hyper-V.
Further commits will define additional hypervisor related traits like
Vcpu and Vm. Each of the supported hypervisor will need to implement all
traits defined from the hypervisor crate.
Signed-off-by: Muminul Islam <muislam@microsoft.com>
