The calls to these functions are always preceded by a call to
InterruptSourceGroup::update(). By adding a masked boolean to that
function call it possible to remove 50% of the calls to the
KVM_SET_GSI_ROUTING ioctl as the the update will correctly handle the
masked or unmasked case.
This causes the ioctl to disappear from the perf report for a boot of
the VM.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rust 2021 edition has a few improvements over the 2018 edition. Migrate
the project to 2021 edition by following recommended migration steps.
Luckily, the code itself doesn't require fixing.
Bump MSRV to 1.56 as it is required by the 2021 edition. Also fix the
clap build dependency to make Cloud Hypervisor build again.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
If EFI reset fails on the Linux kernel then it will fallthrough to CMOS
reset. Implement this as one of our reset solutions.
Fixes: #3912
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Compile this feature in by default as it's well supported on both
aarch64 and x86_64 and we only officially support using it (no non-acpi
binaries are available.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
To emulate debug I/O port on arm64, we need trap from guest to VMM.
Generally, there are 3 ways to go:
1) execute a privilege intruction like "wfi";
2) access a system register;
3) access device MMIO region;
However, 1) and 2) often handled in kvm, thus 3) it's the choice.
There maybe lots of repeated work and enlarge the size of clh to develop
a new device, so it's better to reuse the current device. Luckily, I
find that pl011 is the eariest device initialized in kernel and, there
is reserved region in it which we can reuse for emulating debug I/O.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
error: unneeded late initalization
Error: --> devices/src/legacy/rtc_pl031.rs:294:9
|
294 | let v;
| ^^^^^^
|
= note: `-D clippy::needless-late-init` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `v` here
|
297 | let v = if (AMBA_ID_LOW..AMBA_ID_HIGH).contains(&offset) {
| +++++++
help: remove the assignments from the branches
|
299 ~ u32::from(PL031_ID[index])
300 | } else {
301 ~ match offset {
302 | RTCDR => self.get_time(),
303 | RTCMR => {
304 | // Even though we are not implementing RTC alarm we return the last value
...
help: add a semicolon after the `if` expression
|
317 | };
| +
error: unneeded late initalization
Error: --> devices/src/legacy/uart_pl011.rs:297:9
|
297 | let v;
| ^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `v` here
|
299 | let v = if (AMBA_ID_LOW..AMBA_ID_HIGH).contains(&(offset >> 2)) {
| +++++++
help: remove the assignments from the branches
|
301 ~ u32::from(PL011_ID[index])
302 | } else {
303 ~ match offset >> 2 {
304 | UARTDR => {
305 | let c: u32;
306 | let r: u32;
...
help: add a semicolon after the `if` expression
|
340 | };
| +
error: unneeded late initalization
Error: --> devices/src/legacy/uart_pl011.rs:305:21
|
305 | let c: u32;
| ^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `c` here
|
309 | let c: u32 = self.read_fifo.pop_front().unwrap_or_default().into();
| ~~~~~~~~~~
error: unneeded late initalization
Error: --> devices/src/legacy/uart_pl011.rs:306:21
|
306 | let r: u32;
| ^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `r` here
|
320 | let r: u32 = c;
| ~~~~~~~~~~
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The register D has only one bit that is not reserved, and its purpose is
to report if the RTC/CMOS device is powered or not.
The OVMF firmware was failing to boot as it was getting the information
that the device was powered off from the register D.
The simple way to fix this issue is by always returning the bit 7 from
register D as 1, indicating the device is always powered.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Because anyhow version 1.0.46 has been yanked, let's move back to the
previous version 1.0.45.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
For the bus scanning the GED AML code now calls into a PSCN method that
scans all buses. This approach was chosen since it handles the case
correctly where one GED interrupt is services for two hotplugs on
distinct segments.
The PCIU and PCID field values are now determined by the PSEG field that
is uses to select which segment those values should be used for.
Similarly _EJ0 will notify based on the value of _SEG.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This was causing some issues because of the use of 2 different versions
for the vm-memmory crate. We'll wait for all dependencies to be properly
resolved before we move to 0.7.0.
This reverts commit 76b6c62d07.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In preparation for reorganizing how the serial output is constructed
add methods to the serial devices for setting the out buffer after the
device is created.
Also add a method to enable flushing the output buffer to be used to
write the buffer to the PTY fd once the PTY is writable.
Signed-off-by: William Douglas <william.douglas@intel.com>
Validate the size of I/O reads and check that no request is made to an
out of bounds index (which would cause a panic.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Check the size of data buffer for reading on the ApciPmTimer device to
avoid a potential panic if the guest uses non-DWORD access.
Simplify the zeroring of the buffer for AcpiShutdownDevice.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
These statements are useful for understanding the cause of reset or
shutdown of the VM and are not spammy so should be included at info!()
level.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The type is to change from 32-bit to 64-bit. See
https://github.com/rust-lang/libc/issues/1848.
The change is announced via a deprecation warning. Cloud Hypervisor's
code does not need changing. Simply suppress these warnings.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
This doesn't really affect the build as we ship a Cargo.lock with fixed
versions in. However for clarity it makes sense to use fixed versions
throughout and let dependabot update them.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
With the new beta version, clippy complains about redundant allocation
when using Arc<Box<dyn T>>, and suggests replacing it simply with
Arc<dyn T>.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Issue from beta verion of clippy:
Error: --> vm-virtio/src/queue.rs:700:59
|
700 | if let Some(used_event) = self.get_used_event(&mem) {
| ^^^^ help: change this to: `mem`
|
= note: `-D clippy::needless-borrow` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_borrow
Signed-off-by: Bo Chen <chen.bo@intel.com>
On FDT, VMM can allocate IRQ from 0 for devices.
But on ACPI, the lowest range below 32 has to be avoided.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Now all crates use edition = "2018" then the majority of the "extern
crate" statements can be removed. Only those for importing macros need
to remain.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In order to support using Versionize for state structures it is necessary
to use simpler, primitive, data types in the state definitions used for
snapshot restore.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Simplify snapshot & restore code by using generics to specify helper
functions that take / make a Serialize / Deserialize struct
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: an implementation of `From` is preferred since it gives you `Into<_>` for free where the reverse isn't true
Error: --> devices/src/legacy/rtc_pl031.rs:73:1
|
73 | impl Into<libc::clockid_t> for ClockType {
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
= note: `-D clippy::from-over-into` implied by `-D warnings`
= help: consider to implement `From` instead
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#from_over_into
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: redundant slicing of the whole range
Error: --> devices/src/legacy/gpio_pl061.rs:298:37
|
298 | let value = read_le_u32(&data[..]);
| ^^^^^^^^^ help: use the original slice instead: `data`
|
= note: `-D clippy::redundant-slicing` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#redundant_slicing
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
error: name `GPIOInterruptDisabled` contains a capitalized acronym
Error: --> devices/src/legacy/gpio_pl061.rs:46:5
|
46 | GPIOInterruptDisabled,
| ^^^^^^^^^^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `GpioInterruptDisabled`
|
= note: `-D clippy::upper-case-acronyms` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
warning: name `AcpiPMTimerDevice` contains a capitalized acronym
--> devices/src/acpi.rs:175:12
|
175 | pub struct AcpiPMTimerDevice {
| ^^^^^^^^^^^^^^^^^ help: consider making the acronym lowercase, except the initial letter: `AcpiPmTimerDevice`
|
= note: `#[warn(clippy::upper_case_acronyms)]` on by default
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#upper_case_acronyms
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit implements ARM PrimeCell General Purpose Input/Output
(GPIO) PL061 device specification.
Signed-off-by: Penny Zheng <penny.zheng@arm.com>
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
On AArch64, interrupt controller (GIC) is emulated by KVM. VMM need to
set IRQ routing for devices, including legacy ones.
Before this commit, IRQ routing was only set for MSI. Legacy routing
entries of type KVM_IRQ_ROUTING_IRQCHIP were missing. That is way legacy
devices (like serial device ttyS0) does not work.
The setting of X86 IRQ routing entries are not impacted.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Both GIC and IOAPIC must implement a new method notifier() in order to
provide the caller with an EventFd corresponding to the IRQ it refers
to.
This is needed in anticipation for supporting INTx with VFIO PCI
devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In anticipation for supporting the notifier function for the legacy
interrupt source group, we need this function to return an EventFd
instead of a reference to this same EventFd.
The reason is we can't return a reference when there's an Arc<Mutex<>>
involved in the call chain.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Currently the GED control is in a fixed I/O port address but instead use
an MMIO address that has been chosen by the allocator.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
If a GED event of type 0x8 (for power button) is received notify the
guest OS that this button device has been activated.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Renamed this bitfield as it will also be used for non-hotplug purposes
such as synthesising a power button.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This can be uses to indicate to the caller that it should wait on the
barrier before returning as there is some asynchronous activity
triggered by the write which requires the KVM exit to block until it's
completed.
This is useful for having vCPU thread wait for the VMM thread to proceed
to activate the virtio devices.
See #1863
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Windows will write zero to the IOAPIC version register as part of
probing if the device is there.
Fixes: #1791
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
A new version of vm-memory was released upstream which resulted in some
components pulling in that new version. Update the version number used
to point to the latest version but continue to use our patched version
due to the fix for #1258
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When the destination mode is physical, the destination field should
only be defined through bits 56-59, as defined in the IOAPIC spec. But
from the APIC specification, the APIC ID is always defined on 8 bits no
matter which destination mode is selected. That's why we always retrieve
the destination field based on bits 56-63.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When created, the IOAPIC entries should be masked, as it is the guest's
responsibility (FW and/or OS) to unmask them if/when necessary.
This patch saves a full round of port I/O writes from the guest to the
IOAPIC, meant for masking the unmasked entries.
Because they're now masked, the entries are not enabled, which means
they are not connected from a KVM perspective, saving from unneeded
registration/unregistration of the irq fds.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Unlike x86_64, the "interrupt_controller" in the device manager
for AArch64 is only a `Gic` object that implements the
`InterruptController` to provide the interrupt delivery service.
This is not the real GIC device so that we do not need to save
its states. Also, we do not need to insert it to the device_tree.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Misspellings were identified by https://github.com/marketplace/actions/check-spelling
* Initial corrections suggested by Google Sheets
* Additional corrections by Google Chrome auto-suggest
* Some manual corrections
Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
This removes the dependency of the pci crate on the devices crate which
now only contains the device implementations themselves.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
There will be some cases where the implementation of the snapshot()
function from the Snapshottable trait will require to modify some
internal data, therefore we make this possible by updating the trait
definition with snapshot(&mut self).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This is a counter exposed via an I/O port that runs at 3.579545MHz. Here
we use a hardcoded I/O and expose the details through the FADT table.
TEST=Boot Linux kernel and see the following in dmesg:
[ 0.506198] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This bit should be set for the last 224us of each second. To be able to
fill this bit we need to use clock_gettime() to get the nanoseconds.
Also set the frequency bit to indicate we update at 32kHz.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
In this commit we saved the BDF of a PCI device and set it to "devid"
in GSI routing entry, because this field is mandatory for GICv3-ITS.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This commit adds the implementation for the AArch64 PL031
Real Time Clock (RTC) that provides a long time base counter. This
is achieved by generating an interrupt signal after counting a
programmed number of cycles of a real-time clock input. The AArch64
guest VM of the cloud-hypervisor will use this RTC to sync the time
in itself.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit only implements the InterruptController crate on AArch64.
The device specific part for GIC is to be added.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
IOAPIC, a X86 specific interrupt controller, is referenced by device
manager and CPU manager. To work with more architectures, a common
type for all architectures is needed.
This commit introduces trait InterruptController to provide architecture
agnostic functions. Device manager and CPU manager can use it without
caring what the underlying device is.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This identifier is chosen from the DeviceManager so that it will manage
all identifiers across the VM, which will ensure uniqueness.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
OVMF and other standard firmwares use I/O port 0x402 as a simple debug
port by writing ASCII characters to it. This is gated under a feature
that is not enabled by default.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
