The MTRR feature was missing from the CPUID, which is causing the guest
to ignore the MTRR settings exposed through dedicated MSRs.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Removing the ISA DMA configurations prevents the kernel from accessing
the port I/O 0x87, which was generating the following warning:
WARN:vmm/src/cpu.rs:378 -- Guest PIO read to unregistered address 0x87
Removing the TELCLOCK configuration prevents the kernel from accessing
the port I/O reserved for the memory manager, which was causing the
following warning:
WARN:vmm/src/memory_manager.rs:289 -- Unexpected offset for accessing
memory manager device: 15
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The ::new() does very little beyond trying to open the /dev/kvm device
so provide a hint to the user about what has gone wrong.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
As discussed in #1707, the `vcpu` thread can be stalled when using
`--serial tty`. To workaround that issue, this patch enforces to resize
the pipe size to 256K when we capture the stdout/stderr of the
cloud-hypervisor child process in the integration tests. Note that the
pipe size (256K) is chosen based on the output size of our integration
tests at this point, which may need to be increased in the future.
Signed-off-by: Bo Chen <chen.bo@intel.com>
By looking at Linux kernel boot time, we identified that a lot of time
was spent registering and unregistering IRQ fds to KVM. This is not
efficient and certainly not a wrong behavior from the Linux kernel,
but rather a problem with the Cloud-Hypervisor's implementation of
MSI-X.
The way to fix this issue is by ensuring the initial conditions are
correct, which means the entire MSI-X vector table must be disabled
and masked. Additionally, each vector must be individually masked.
With these correct conditions, Linux won't start masking interrupt
vectors, and later unmask them since they will be seen as masked from
the beginning. This means the OS will simply have to unmask them when
needed, avoiding the extra operation.
Another aspect of this patch is to prevent Cloud-Hypervisor from
enabling (by registering IRQ fd) all vectors when either the global
'mask' or 'enable' bits are set. Instead, we can simply let the mask()
and unmask() operations take care of it if needed.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since Cloud-Hypervisor currently support one single PCI bus, we must
reflect this through the MCFG table, as it advertises the first bus and
the last bus available. In this case both are bus 0.
This patch saves quite some time during guest kernel boot, as it
prevents from checking each bus for available devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When created, the IOAPIC entries should be masked, as it is the guest's
responsibility (FW and/or OS) to unmask them if/when necessary.
This patch saves a full round of port I/O writes from the guest to the
IOAPIC, meant for masking the unmasked entries.
Because they're now masked, the entries are not enabled, which means
they are not connected from a KVM perspective, saving from unneeded
registration/unregistration of the irq fds.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
While we figure out the details on how to correctly build virtiofsd from
the latest rebase from the branch "virtio-fs-dev" (which now relies on
QEMU's new build system), let's fix the CI by relying on an older branch
which still relies on the previous build system.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The states of GIC should be part of the VM states. This commit
enables the AArch64 VM states save/restore by adding save/restore
of GIC states.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Currently for AArch64, the GICv3-ITS is tried to be created first
when PCI is not needed, which is unnecessary. This commit fixes
the problem.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The definition of libc::SYS_ftruncate on AArch64 is different
from that on x86_64. This commit unifies the previously hard-coded
syscall number for AArch64.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
`KVM_GET_REG_LIST` ioctl is needed in save/restore AArch64 vCPU.
Therefore we whitelist this ioctl in seccomp.
Also this commit unifies the `SYS_FTRUNCATE` syscall for x86_64
and AArch64.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Similarly as the VM booting process, on AArch64 systems,
the vCPUs should be created before the creation of GIC. This
commit refactors the vCPU save/restore code to achieve the
above-mentioned restoring order.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Since calling `KVM_GET_ONE_REG` before `KVM_VCPU_INIT` will
result in an error: Exec format error (os error 8). This commit
decouples the vCPU init process from `configure_vcpus`. Therefore
in the process of restoring the vCPUs, these vCPUs can be
initialized separately before started.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The construction of `GICR_TYPER` register will need vCPU states.
Therefore this commit adds methods to extract saved vCPU states
from the cpu manager.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Unlike x86_64, the "interrupt_controller" in the device manager
for AArch64 is only a `Gic` object that implements the
`InterruptController` to provide the interrupt delivery service.
This is not the real GIC device so that we do not need to save
its states. Also, we do not need to insert it to the device_tree.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
The value of GIC register `GICR_TYPER` is needed in restoring
the GIC states. This commit adds a field in the GIC device struct
and a method to construct its value.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
In AArch64 systems, the state of GIC device can only be
retrieved from `KVM_GET_DEVICE_ATTR` ioctl. Therefore to implement
saving/restoring the GIC states, we need to make sure that the
GIC object (either the file descriptor or the device itself) can
be extracted after the VM is started.
This commit refactors the code of GIC creation by adding a new
field `gic_device_entity` in device manager and methods to set/get
this field. The GIC object can be therefore saved in the device
manager after calling `arch::configure_system`.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit adds a function which allows to save RDIST pending
tables to the guest RAM, as well as unit test case for it.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit adds the unit test cases for getting/setting the GIC
distributor, redistributor and ICC registers.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit implements the `get_device_attr` method for the
`KVM_GET_DEVICE_ATTR` ioctl. This ioctl will be used in retrieving
the GIC status.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit moves the GIC-related code to a separate module.
Therefore the implementation of GIC registers can be introduced
to the new module.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Adds 3 more unit test cases for AArch64:
*save_restore_core_regs
*save_restore_system_regs
*get_set_mpstate
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit adds methods to save/restore AArch64 vCPU registers,
including:
1. The AArch64 `VcpuKvmState` structure.
2. Some `Vcpu` trait methods of the `KvmVcpu` structure to
enable the save/restore of the AArch64 vCPU states.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit ports code from firecracker and refactors the existing
AArch64 code as the preparation for implementing save/restore
AArch64 vCPU, including:
1. Modification of `arm64_core_reg` macro to retrive the index of
arm64 core register and implemention of a helper to determine if
a register is a system register.
2. Move some macros and helpers in `arch` crate to the `hypervisor`
crate.
3. Added related unit tests for above functions and macros.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Misspellings were identified by https://github.com/marketplace/actions/check-spelling
* Initial corrections suggested by Google Sheets
* Additional corrections by Google Chrome auto-suggest
* Some manual corrections
Signed-off-by: Josh Soref <jsoref@users.noreply.github.com>
virtio-mem device would use 'VIRTIO_MEM_F_ACPI_PXM' to add memory to NUMA
node, which MUST be existed, otherwise it will be assigned to node id 0,
even if user specify different node id.
According ACPI spec about Memory Affinity Structure, system hardware
supports hot-add memory region using 'Hot Pluggable | Enabled' flags.
Signed-off-by: Jiangbo Wu <jiangbo.wu@intel.com>
Use zone.host_numa_node to create memory zone, so that memory zone
can apply memory policy in according with host numa node ID
Signed-off-by: Jiangbo Wu <jiangbo.wu@intel.com>
If after the creation of the self-spawned backend, the VMM cannot create
the corresponding vhost-user frontend, the VMM must kill the freshly
spawned process in order to ensure the error propagation can happen.
In case the child process would still be around, the VMM cannot return
the error as it waits onto the child to terminate.
This should help us identify when self-spawned failures are caused by a
connection being refused between the VMM and the backend.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When the VMM is terminated by receiving a SIGTERM signal, the signal
handler thread must be able to invoke ioctl(TCGETS) and ioctl(TCSETS)
without error.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Build testing of changes happens on GitHub actions and the integration
tests will build the binary (with different feature flags) again. So
these earlier build operations are just wasted time on the critical
path.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
