Adding the support for the user to set the MTU for the vhost-user-net
backend, which allows the integration test to be extended with the test
of the MTU parameter.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add a new "mtu" parameter to the NetConfig structure and therefore to
the --net option. This allows Cloud Hypervisor's users to define the
Maximum Transmission Unit (MTU) they want to use for the network
interface that they create.
In details, there are two main aspects. On the one hand, the TAP
interface is created with the proper MTU if it is provided. And on the
other hand the guest is made aware of the MTU through the VIRTIO
configuration. That means the MTU is properly set on both the TAP on the
host and the network interface in the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This function starts the 'receive-migration' for the destination VM,
'send-migration' for the source VM, waits for the live-migration
completion, and prints debug information upon errors.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This patch moves the actual test logic and assertions from various
functions to the actual tests, which makes these tests more readable and
easier to debug.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Until the issue #4583 is resolved, we must disable this test given it's
failing quite often on the aarch64 worker.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As 'handle_child_output()' may terminate the test on panic, we need to
cleanup ovs-dpdk setup in advance.
see: #4555
Signed-off-by: Bo Chen <chen.bo@intel.com>
Following our recent v26.0 release we can re-enable our live upgrade
tests to try and make it possible for us to move to making LTS releases.
Currently limited to x86-64 as the live upgrade tests fail on aarch64.
Fixes: #3949
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Only the ovs-dpdk live-migration tests need to run sequentially as they
use the same ovs-dpdk setup.
This is to reduce our CI time, particularly for the live-migration
and aarch64 jobs.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This enables the Windows test module. One basic test is enabled,
while all others are disabled yet for aarch64. Jenkins file is
extended with the corresponding step for aarch64.
installAzureCli() is parametrized.
It seems that transferring a 30GB image would take >= 15 minutes. An
optimization here is having a gzip'ed image to 10GB which would unpack
in 3 minutes. Expect to be quicker than transferring an uncompressed
image while on another network.
Signed-off-by: Anatol Belski <ab@php.net>
The test test_virtio_block_topology has been recently failing due to an
error happening in losetup while trying to set the block size. Since
there's no option in losetup for retrying, we took the approach of
programming the expected behavior of creating a loop device relying
directly on the system ioctl LOOP_CONFIGURE. We apply a retry loop based
on the result returned by this ioctl, so that we don't fail on the first
try. We also added a sleep before retrying, hoping this would help the
next iteration to succeed.
Fixes#3494
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It's been observed on the Bionic image that udev and snapd services can
cause some delay in the VM's shutdown. Disabling them before shutting
down the VM improves the reliability of the test.
Also increasing slightly the sleep time to ensure we give the VM enough
time to shutdown before checking the list of events provided by the
event monitor.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since it's not possible to run the integration test test_vfio on Azure
at the moment (because of some nested virtualization issues), we can
temporarily run it on the baremetal CI where we already run some VFIO
tests.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Move the live migration tests to a 'jammy' worker rather than
'jammy-small'. This type of worker has more CPUs (64 vs 16) and more RAM
(256G vs 64G), which should improve the time it takes to run each test.
With this improvement, the test shouldn't fail anymore due to timeout
being reached.
A second improvement is to reduce the amount of vCPUs created for each
VM. The point is simply to check we can migrate a VM with multiple
vCPUs, therefore using 2 instead of 6 should be enough when possible.
When testing NUMA, we can't lower the amount of vCPUs since there's a
quite complex topology that is expected there.
Also, the total amount of vCPUs is reduced from 12 to 4 (again when not
testing with NUMA).
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Improve error catching on the steps creating the block device so that we
can understand if qemu-img or losetup is the faulty command leading to
an empty device path.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Both of these tests have been sporadically failing through multiple CI
runs. The reason is related to cloud-init which fails to run the
"init-local" script during the second boot of the VM. This causes the
network interface to not be available, and therefore the test can't SSH
into the VM as expected. The root cause is the filesystem and cache
corruption that happens on the cloud-init disk.
The way to prevent from this issue is to sync the guest filesystem
before we shut it down, and as a security harness, we also wait for a
few seconds for the shutdown command to complete inside the guest before
we trigger the API shutdown or delete.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
It might sometimes take a few seconds for the guest to trigger the OOM
and report it back to the host. That's why this patch adds some sleep
time between the command in the guest supposedly triggering the OOM and
the check of the balloon size from the host.
Fixes#4336
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
warning: you are deriving `PartialEq` and can implement `Eq`
--> vmm/src/serial_manager.rs:59:30
|
59 | #[derive(Debug, Clone, Copy, PartialEq)]
| ^^^^^^^^^ help: consider deriving `Eq` as well: `PartialEq, Eq`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#derive_partial_eq_without_eq
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
As coredump function is to make a vmcore for crash tool to analyze,
in order not to introduce a big thing in integration, we just check
if ch-remote command runs no error report here.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
From the logs it appears that booting the VM to the point at which it
can signal to the host can sometimes take longer than then 30 seconds
specified.
Fixes: #4136
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The current patch fixes the following error that was raised by clippy:
error: this let-binding has unit value
--> tests/integration.rs:6538:13
|
6538 | / let _ = stdin
6539 | | .write_all("type=7".as_bytes())
6540 | | .expect("failed to write stdin");
| |_________________________________________________^
|
= note: `-D clippy::let-unit-value` implied by `-D warnings`
= help: for further information visit
https://rust-lang.github.io/rust-clippy/master/index.html#let_unit_value
help: omit the `let` binding
|
6538 ~ stdin
6539 + .write_all("type=7".as_bytes())
6540 + .expect("failed to write stdin");
|
error: could not compile `cloud-hypervisor` due to previous error
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In this way, we can cover a broad range of events from the event monitor
while avoiding code duplication.
Fixes: #4054
Signed-off-by: Bo Chen <chen.bo@intel.com>
This prevents a conflict since the old API socket will not have been
cleaned up (due to the use of SIGKILL.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Live upgrade is currently not guaranteed during this development cycle
and we will try to enable these tests after the next release.
Signed-off-by: Bo Chen <chen.bo@intel.com>
By augmenting existing set of tests, this patch added a set of
tests for live-upgrade that covers use cases with NUMA,
vhost-user (OVS-DPDK), and local-migration.
Fixes: #3949
Signed-off-by: Bo Chen <chen.bo@intel.com>
We modified a test case to workaround the RAM calculation error caused
by hidding 4MiB memory for UEFI. Now change it back to normal.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Now that address translations performed by virtio-iommu can error out if
the address can't be translated, we uncovered an issue in integration
test aarch64_acpi::test_virtio_iommu.
We disable the test until we can investigate and fix the root cause.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The extra vDPA device in the test is hotplugged behind the vIOMMU, which
covers the use case of placing a vDPA device behind a virtual IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As reported by the periodic CI runs, it may take more time for the NVMe
device to present in the guest after being hotplugged as a VFIO user
device on `aarch64` (especially under high load). Let's increase the
timeout after device hotplug from `1s` to `10s` to increase the test
stability.
Fixes: #3495
Signed-off-by: Bo Chen <chen.bo@intel.com>
Compile this feature in by default as it's well supported on both
aarch64 and x86_64 and we only officially support using it (no non-acpi
binaries are available.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
It seems the vdpa_sim_block isn't behaving properly after the vhost
device is closed, as it sometimes returns EBUSY when we try to open it
again. The easiest way to deal with this issue is by simplifying the
integration test, avoid to plug the same device after it's been
unplugged.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Disable the DAX feature from the virtio-fs implementation as the feature
is still not stable. The feature is deprecated, meaning the 'dax'
parameter will be removed in about 2 releases cycles.
In the meantime, the parameter value is ignored and forced to be
disabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The test is sporadically failing whenever we try to hotplug the vDPA
device we've just unplugged. This is causing the kernel to complain with
EBUSY because the device hasn't been released yet. This is happening
because the CI system is under very high load, therefore taking quite
some time to the host to update the state of this device.
The easy way to fix such issue is by increasing the sleep time between
the unplug and the replug.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Ensure devices that are specified to be on a PCI segment that is behind
the IOMMU are IOMMU enabled if possible or error out for those devices
that do not support it.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Adding two new integration tests for vDPA, relying on both block and net
simulators from the host kernel.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In this way, we can cover local-migration with dpdk in our regular CI,
to prevent similar regressions reported and fixed by #3657.
Fixes: #3659
Signed-off-by: Bo Chen <chen.bo@intel.com>
Introducing a new integration test relying on the virtio-balloon ability
to free host pages that have been reported as freed by the guest.
This test checks that after consuming a lot of RAM in the guest, the VMM
process is able to releases the pages reported by the guest. Simply done
by checking the RSS associated with the VMM's process follows the memory
trend in the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In this way, we allows to reuse the struct `Guest` with kernel paths and
kernel commands (e.g. hardcoded constants) that are tests-specific.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Instead of using hardcoded firmware paths inside the `Guest` struct
constructor, this commit removes `fw_path` related code paths from the
`Guest` struct and asks each test constructs its firmware path
explicitly. This allows better flexibility for the `Guest` struct so
that it can be reused for the performance tests we are adding soon.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Now that multiple file descriptors can be provided along with add-net,
that means we can hotplug a multiqueue macvtap interface to the VM.
The common macvtap test is updated, meaning that both coldplug and
hotplug codepath now use multiqueue.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add integration tests for "pmu=on". It depends on checking if there
is "arm-pmu" item in "/proc/interrupts". As PMU info has not been added
to ACPI, the tests are only for dt.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
As it might take more time for the VM to boot (especially under high
load) when using the firmware, let's increase the timeout waiting for
the VM to be reachable.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Both OVMF and RHF firmwares triggered an error when O_DIRECT was used
because they didn't align the buffers to the block sector size.
In order to prevent regressions, we're adding a new test validating the
VM can properly boot when the OS disk is opened with O_DIRECT and booted
from the rust-hypervisor-fw.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Update documentation and CI to rely on the new CLOUDHV.fd firmware built
from the newly introduced target CloudHvX64.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
error: this boolean expression can be simplified
--> tests/integration.rs:3755:33
|
3755 | assert!(!(empty > 5), "No login on pty");
| ^^^^^^^^^^^^ help: try: `empty <= 5`
|
= note: `-D clippy::nonminimal-bool` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#nonminimal_bool
error: unneeded late initalization
--> tests/integration.rs:7619:13
|
7619 | let mut success;
| ^^^^^^^^^^^^^^^^
|
= note: `-D clippy::needless-late-init` implied by `-D warnings`
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `success` here
|
7621 | let mut success = if let Some(status) = send_migration
| +++++++++++++++++
help: remove the assignments from the branches
|
7625 ~ status.success()
7626 | } else {
7627 ~ false
|
help: add a semicolon after the `if` expression
|
7628 | };
| +
error: unneeded late initalization
--> tests/integration.rs:7838:13
|
7838 | let mut success;
| ^^^^^^^^^^^^^^^^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#needless_late_init
help: declare `success` here
|
7840 | let mut success = if let Some(status) = send_migration
| +++++++++++++++++
help: remove the assignments from the branches
|
7844 ~ status.success()
7845 | } else {
7846 ~ false
|
help: add a semicolon after the `if` expression
|
7847 | };
| +
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When enabling the `mshv` feature, we skip quite some tests and
hence have known dead-code. This annotation silences dead-code
related warnings for our quality workflow to pass.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Given integration tests are placed in a dedicate directory, they don't
need annotations (e.g. `#[cfg(integration_test)]` and `#[cfg(test)]`) or
defining `test mod` to exclude themselves from the common compilation
process.
Signed-off-by: Bo Chen <chen.bo@intel.com>
