The expansion ROM BAR can be considered like a 32-bit memory BAR with a
slight difference regarding the amount of reserved bits at the beginning
of its 32-bit value. Bit 0 indicates if the BAR is enabled or disabled,
while bits 1-10 are reserved. The remaining upper 21 bits hold the BAR
address.
This commit extends the pci crate in order to support expansion ROM BAR.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The check performed on the end address was wrong since the end address
was actually the address right after the end. To get the right end
address, we need to add (region size - 1) to the start address.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The way the function write_reg() was implemented, it was not keeping
the bits supposed to be read-only whenever the guest was writing to one
of those. That's why this commit takes care of protecting those bits,
preventing them from being updated.
The tricky part is about the BARs since we also need to handle the very
specific case where the BAR is being written with all 1's. In that case
we want to return the size of the BAR instead of its address.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
A BAR can be three different types: IO, 32 bits Memory, or 64 bits
Memory. The VMM needs a way to set the right type depending on its
needs.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
As mentioned in the PCI specification, the Function Mask from the
Message Control Register can be set to prevent a device from injecting
MSI-X messages. This supersedes the vector masking as it interacts at
the device level.
Here quoted from the specification:
For MSI and MSI-X, while a vector is masked, the function is prohibited
from sending the associated message, and the function must set the
associated Pending bit whenever the function would otherwise send the
message. When software unmasks a vector whose associated Pending bit is
set, the function must schedule sending the associated message, and
clear the Pending bit as soon as the message has been sent. Note that
clearing the MSI-X Function Mask bit may result in many messages
needing to be sent.
This commit implements the behavior described above by reorganizing
the way the PCI configuration space is being written. It is indeed
important to be able to catch a change in the Message Control
Register without having to implement it for every PciDevice
implementation. Instead, the PciConfiguration has been modified to
take care of handling any update made to this register.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add the BSD and Apache license.
Make all crosvm references point to the BSD license.
Add the right copyrights and identifier to our VMM code.
Add Intel copyright to the vm-virtio and pci crates.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
After the virtio-blk device support has been introduced in the
previous commit, the vmm need to rely on this new device to boot
from disk images instead of initrd built into the kernel.
In order to achieve the proper support of virtio-blk, this commit
had to handle a few things:
- Register an ioevent fd for each virtqueue. This important to be
notified from the virtio driver that something has been written
on the queue.
- Fix the retrieval of 64bits BAR address. This is needed to provide
the right address which need to be registered as the notification
address from the virtio driver.
- Fix the write_bar and read_bar functions. They were both assuming
to be provided with an address, from which they were trying to
find the associated offset. But the reality is that the offset is
directly provided by the Bus layer.
- Register a new virtio-blk device as a virtio-pci device from the
vm.rs code. When the VM is started, it expects a block device to
be created, using this block device as the VM rootfs.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This crate is based on the crosvm devices/src/pci implementation from 107edb3e
We introduced a few changes:
- This one is a standalone crate. The device crate does not carry any
PCI specific bits.
- Simplified PCI root configuration. We only carry a pointer to a
PciConfiguration, not a wrapper around it.
- Simplified BAR allocation API. All BARs from the PciDevice instance
must be generated at once through the PciDevice.allocate_bars()
method.
- The PCI BARs are added to the MMIO bus from the PciRoot add_device()
method.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
