Previously the device setup code assumed that if no IOAPIC was passed in
then the device should be added to the kernel irqchip. As an earlier
change meant that there was always a userspace IOAPIC this kernel based
code can be removed.
The accessor still returns an Option type to leave scope for
implementing a situation without an IOAPIC (no serial or GED device).
This change does not add support no-IOAPIC mode as the original code did
not either.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Update the configuration after a resize to ensure that after a reboot
the added vCPUs are preserved.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This was causing issues when the kernel was trying to reset the
interrupt and making the reboot fail.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The tty mode remains raw mode when cloud-hypervisor is terminted by
SIGTERM or SIGINT. The terminal is unusable due to echoing is
disabled which is really annoying.
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
Some physical address bits may become reserved in page table when SME
is enabled on AMD platform. Guest will trigger a reserved bit
violation page fault in this case due to write these reserved bits to 1
in page table. We need reduce the reserved bits to get the right
physical address range.
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
The KVM_SET_GSI_ROUTING ioctl is very simple, it overrides the previous
routes configuration with the new ones being applied. This means the
caller, in this case cloud-hypervisor, needs to maintain the list of all
interrupts which needs to be active at all times. This allows to
correctly support multiple devices to be passed through the VM and being
functional at the same time.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Call the "CTFY" method that will itself call Notify() on the CPU objects
in the ACPI namespace.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add ability to notify via the GED device that there is some new hotplug
activity. This will be used by the CpuManager (and later DeviceManager
itself) to notify of new hotplug activity.
Currently it has a hardcoded IRQ of 5 as the ACPI tables also need to
refer to this IRQ and the IRQ allocation does not permit the allocation
of specific IRQs.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Currently only increasing the number of vCPUs is supported but in the
future it will be extended.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When configuring a processor after boot as a hotplug CPU we only
configure a subset of the CPU state. In particular we should not
configure the FPU, segment registers (or reconfigure the paging which is
a side-effect of that) nor the main registers. Achieve this by making
the function take an Option type for the start address.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Refactor the vCPU thread starting so that there is the possibility to
bring on extra vCPU threads.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Currently this just holds the thread handle but will be enlarged to
encompass details such as whether the vCPU is currently being inserted
or ejected.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The MADT table contains the details of all the potential vCPUs and
whether they are present at boot (as indicated by the flags field.)
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When initialising the ACPI tables and configuring the VM use the new
accessor on the CpuManager to get the number of boot vCPUs.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Since the kvm crates now depend on vmm-sys-util, the bump must be
atomic.
The kvm-bindings and ioctls 0.2.0 and 0.4.0 crates come with a few API
changes, one of them being the use of a kvm_ioctls specific error type.
Porting our code to that type makes for a fairly large diff stat.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
context ID on vsock man defines a 32-bits value, openapi default integer
is a signed 32-bits value.
This could lead to miss one bit during castings for typed client
implmentations. Lets increase the range of valid values by requesting an
int64.
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
In case the VM is started with the flag "--pmem mergeable=on", it means
the user expects the guest persistent memory pages to be marked as
mergeable. This commit relies on the madvise(MADV_MERGEABLE) system call
to inform the host kernel about these pages.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to let the user indicate if the persistent memory pages should
be marked as mergeable or not, a new option is being introduced.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case the VM is started with the flag "--memory mergeable=on", it
means the user expects the guest RAM pages to be marked as mergeable.
This commit relies on the madvise(MADV_MERGEABLE) system call to inform
the host kernel about these pages.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to let the user indicate if the guest RAM pages should be
marked as mergeable or not, a new option is being introduced.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
When vmm.ping give a response, we expect get the version from
the VMM not the vmm create
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
vmm.ping will help to check if http API server is up and
running.
This also removes the vmm.info endpoint.
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
The CPU manager uses an I/O port and to prevent potential clashes with
assignment for PCI devices ensure that it is allocated by the allocator.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Rather than hardcode the CPU status for all the CPUs instead query from
the CPU manager via the I/O port that is is on via the ACPI tables.
Each CPU device has a _STA method that calls into the CSTA method which
reads and writes the I/O ports via the PRST field which exposes the I/O
port through and OpRegion.
As we only support boot CPUS report that all the CPUs are enabled for
now.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The Linux kernel expects all CPUs, whether they be enabled or disabled
to have an _MAT entry containing the LAPIC details for this CPU with the
enabled bit set to 1 (in the flags.)
In the MADT table the same bit is used to determine if the CPU is
present at boot vs available later.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When adding devices to the guest, and populating the device model, we
should prefix the routines with add_. When we're just creating the
device objects but not yet adding them we use make_.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to reduce the DeviceManager's new() complexity, we can move the
MMIO devices creation code into its own routine.
Fixes: #441
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to reduce the DeviceManager's new() complexity, we can move the
PCI devices creation code into its own routine.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to reduce the DeviceManager's new() complexity, we can move the
ACPI device creation code into its own routine.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to reduce the DeviceManager's new() complexity, we can move the
ACPI device creation code into its own routine.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to reduce the DeviceManager's new() complexity, we can move the
legacy devices creation code into its own routine.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to reduce the DeviceManager's new() complexity, we can move the
console creation code into its own routine.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
