Everytime we use VFIO with cloud-hypervisor, we get the following error:
ERROR:vfio/src/vfio_device.rs:440 -- Could not get region #8 info
But this is not an error per se, and should be considered as a simple
warning.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
This allows us to change the memory map that is being used by the
devices via an atomic swap (by replacing the map with another one). The
ArcSwap provides the mechanism for atomically swapping from to another
whilst still giving good read performace. It is inside an Arc so that we
can use a single ArcSwap for all users.
Not covered by this change is replacing the GuestMemoryMmap itself.
This change also removes some vertical whitespace from use blocks in the
files that this commit also changed. Vertical whitespace was being used
inconsistently and broke rustfmt's behaviour of ordering the imports as
it would only do it within the block.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The vsock packets that we're building are resolving guest addresses to
host ones and use the latter as raw pointers.
If the corresponding guest mapped buffer spans across several regions in
the guest, they will do so in the host as well. Since we have no
guarantees that host regions are contiguous, it may lead the VMM into
trying to access memory outside of its memory space.
For now we fix that by ensuring that the guest buffers do not span
across several regions. If they do, we error out.
Ideally, we should enhance the rust-vmm memory model to support safe
acces across host regions.
Fixes CVE-2019-18960
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The signal handling for vCPU signals has changed in the latest release
so switch to the new API.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This commit ensures device's PCI config space is being written after
MSI/MSI-X interrupts have been enabled/disabled. In case of MSI, when
the interrupts are enabled through VFIO (using VFIO_DEVICE_SET_IRQS),
the MSI Enable bit in the MSI capability structure found in the PCI
config space is disabled by default. That's why when the guest is
enabling this bit, we first need to enable the MSI interrupts with
VFIO through VFIO_DEVICE_SET_IRQS ioctl, and only after we can write
to the device region to update the MSI Enable bit.
Fixes#460
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The comments of vfio kernel module said that individual subindex
interrupts can be disabled using the -1 value for DATA_EVENTFD or
the index can be disabled as a whole with:
flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
CC: Liu Jiang <gerry@linux.alibaba.com>
The KVM_SET_GSI_ROUTING ioctl is very simple, it overrides the previous
routes configuration with the new ones being applied. This means the
caller, in this case cloud-hypervisor, needs to maintain the list of all
interrupts which needs to be active at all times. This allows to
correctly support multiple devices to be passed through the VM and being
functional at the same time.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to improve the existing VFIO code, this patch registers the
eventfds used to trigger KVM interrupts only when the interrupts are
enabled, and unregisters them when interrupts are disabled.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since the kvm crates now depend on vmm-sys-util, the bump must be
atomic.
The kvm-bindings and ioctls 0.2.0 and 0.4.0 crates come with a few API
changes, one of them being the use of a kvm_ioctls specific error type.
Porting our code to that type makes for a fairly large diff stat.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Introduce method unmap_mmio_regions to unmap all regions mapped to host.
This patch eliminate the error message "Could not unset container".
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
This reverts commit 66fde245b3.
The commit broke the VFIO support for MSI. Issue needs to be
investigated but in the meantime, it is safer to fix the codebase.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
We disabled msi/msix twice inside Drop trait for VfioPciDevice,
which resulted in error message "Could not disable MSI-X". Eliminating
this error by check whether the msi/msix capability is enabled.
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
CC: Liu Jiang <gerry@linux.alibaba.com>
The comments of vfio kernel module said that individual subindex
interrupts can be disabled using the -1 value for DATA_EVENTFD or
the index can be disabled as a whole with:
flags = (DATA_NONE|ACTION_TRIGGER), count = 0.
Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com>
CC: Liu Jiang <gerry@linux.alibaba.com>
We need to rely on the latest kvm-ioctls version to benefit from the
recent addition of unregister_ioevent(), allowing us to detach a
previously registered eventfd to a PIO or MMIO guest address.
Because of this update, we had to modify the current constraint we had
on the vmm-sys-util crate, using ">= 0.1.1" instead of being strictly
tied to "0.2.0".
Once the dependency conflict resolved, this commit took care of fixing
build issues caused by recent modification of kvm-ioctls relying on
EventFd reference instead of RawFd.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The PciDevice trait is supposed to describe only functions related to
PCI. The specific method ioeventfds() has nothing to do with PCI, but
instead would be more specific to virtio transport devices.
This commit removes the ioeventfds() method from the PciDevice trait,
adding some convenient helper as_any() to retrieve the Any trait from
the structure behing the PciDevice trait. This is the only way to keep
calling into ioeventfds() function from VirtioPciDevice, so that we can
still properly reprogram the PCI BAR.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Based on the value being written to the BAR, the implementation can
now detect if the BAR is being moved to another address. If that is the
case, it invokes move_bar() function from the DeviceRelocation trait.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In case a VFIO devices is being attached behind a virtual IOMMU, we
should not automatically map the entire guest memory for the specific
device.
A VFIO device attached to the virtual IOMMU will be driven with IOVAs,
hence we should simply wait for the requests coming from the virtual
IOMMU.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
With this implementation of the trait ExternalDmaMapping, we now have
the tool to provide to the virtual IOMMU to trigger the map/unmap on
behalf of the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The VFIO container is the object needed to update the VFIO mapping
associated with a VFIO device. This patch allows the device manager
to have access to the VFIO container.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Following the refactoring of the code allowing multiple threads to
access the same instance of the guest memory, this patch goes one step
further by adding RwLock to it. This anticipates the future need for
being able to modify the content of the guest memory at runtime.
The reasons for adding regions to an existing guest memory could be:
- Add virtio-pmem and virtio-fs regions after the guest memory was
created.
- Support future hotplug of devices, memory, or anything that would
require more memory at runtime.
Because most of the time, the lock will be taken as read only, using
RwLock instead of Mutex is the right approach.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The VMM guest memory was cloned (copied) everywhere the code needed to
have ownership of it. In order to clean the code, and in anticipation
for future support of modifying this guest memory instance at runtime,
it is important that every part of the code share the same instance.
Because VirtioDevice implementations need to have access to it from
different threads, that's why Arc must be used in this case.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Latest clippy version complains about our existing code for the
following reasons:
- trait objects without an explicit `dyn` are deprecated
- `...` range patterns are deprecated
- lint `clippy::const_static_lifetime` has been renamed to
`clippy::redundant_static_lifetimes`
- unnecessary `unsafe` block
- unneeded return statement
All these issues have been fixed through this patch, and rustfmt has
been run to cleanup potential formatting errors due to those changes.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The structure of the vmm-sys-util crate has changed with lots of code
moving to submodules.
This change adjusts the use of the imported structs to reference the
submodules.
Fixes: #145
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Update all dependencies with "cargo upgrade" with the exception of
vmm-sys-utils which needs some extra porting work.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
When reading from or writing to the MSI-X table, the function provided
by the PCI crate expects the offset to start from the beginning of the
table. That's why it is VFIO specific code to be responsible for
providing the right offset, which means it needs to be the offset
substracted by the beginning of the MSI-X table offset.
This bug was not discovered until we tested VFIO with some device where
the MSI-X table was placed on a BAR at an offset different from 0x0.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Relying on the newly added code in the pci crate, the vfio crate can now
properly expose an expansion ROM BAR if the device has one.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to support VFIO for devices supporting multiple functions,
we need to mask the multi-function bit (bit 7 from Header Type byte).
Otherwise, the guest kernel ends up tryng to enumerate those devices.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Since our VFIO code does not support pin based interrupt, but only MSI
and MSI-X, it is cleaner to not expose any Interrupt Pin to the guest by
setting its value to 0.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Until the codebase can properly expose the ROM BAR into the guest, it is
better to disable it for now, returning always 0 when the register is
being read.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The IO BAR alignment was already set to 4 bytes, this patch simply added
a comment for it.
The Memory BAR alignment was also set to the right value, but it was not
explained why 0x1000 was needed, and also why 0x10 could sometimes be
used as correct alignment.
A Memory BAR must be aligned at least on 16 bytes since the first 4 bits
are dedicated to some specific information about the BAR itself. But in
case a BAR is identified as mappable from VFIO, this means our VMM might
memory map it into the VMM address space, and set KVM accordingly using
the ioctl KVM_SET_USER_MEMORY_REGION. In case of KVM, we have to take
into account that it expects addresses to be page aligned, which means
4K in this case.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
In order to correctly support multiple VFIO devices, we need to
increment the memory slot index every time it is being used to set some
user memory region through KVM. That's why the mem_slot parameter is
made mutable.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
KVM does not support multiple KVM VFIO devices to be created when
trying to support multiple VFIO devices. This commit creates one
global KVM VFIO device being shared with every VFIO device, which
makes possible the support for passing several devices through the
VM.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
VFIO explictly tells us if a MMIO region can be mapped into the guest
address space or not. Except for MSI-X table BARs, we try to map them
into the guest whenever VFIO allows us to do so. This avoids unnecessary
VM exits when the guest tries to access those regions.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We track all MSI and MSI-X capabilities changes, which allows us to also
track all MSI and MSI-X table changes.
With both pieces of information we can build kvm irq routing tables and
map the physical device MSI/X vectors to the guest ones. Once that
mapping is in place we can toggle the VFIO IRQ API accordingly and
enable disable MSI or MSI-X interrupts, from the physical device up to
the guest.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
In order to properly manage the VFIO device interrupt settings, we need
to keep track of both MSI and MSI-X PCI config capabilities changes.
When the guest programs the device for interrupt delivery, it writes to
the MSI and MSI-X capabilities. This information must be trapped and
cached in order to map the physical device interrupt delivery path to
the guest one. In other words, tracking MSI and MSI-X capabilites will
allow us to accurately build the KVM interrupt routes.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This brings the initial PCI support to the VFIO crate.
The VfioPciDevice is the main structure and holds an inner VfioDevice.
VfioPciDevice implements the PCI trait, leaving the IRQ assignments
empty as this will be driven by both the guest and the VFIO PCI device,
not by the VMM.
As we must trap BAR programming from the guest (We don't want to program
the actual device with guest addresses), we use our local PCI
configuration cache to read and write BARs.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The Virtual Function I/O (VFIO) kernel subsystem exposes a vast and
relatively complex userspace API. This commit abstracts and simplifies
this API into both an internal and external API.
The external API is to be consumed by VFIO device implementation through
the VfioDevice structure. A VfioDevice instance can:
- Enable and disable all interrupts (INTX, MSI and MSI-X) on the
underlying VFIO device.
- Read and write all of the VFIO device memory regions.
- Set the system's IOMMU tables for the underlying device.
Signed-off-by: Zhang, Xiong Y <xiong.y.zhang@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
