Commit Graph

442 Commits

Author SHA1 Message Date
Sebastien Boeuf
7889fc9207 scripts: Run test container with the default bridge network
Using --net=host is not necessary for any of the integration tests, so
let's use the default network option called "bridge".

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-01-11 11:18:48 +00:00
Sebastien Boeuf
df522cf12c ci: Re-enable test_windows_guest_snapshot_restore
This reverts commit 72d054bf40.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-01-11 09:32:58 +00:00
Rob Bradford
a920ef48de Revert "tests: Temporarily disable test_watchdog on aarch64"
This reverts commit 49b49421d0.

Probable solution was applied in f70852c04b

Fixes: #2103

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-01-11 10:26:52 +01:00
Sebastien Boeuf
20fde6b924 tests: Increase sleep time in Windows integration tests
Some sporadic failures were due to an early connection to the VM while
it was not fully ready. Increasing sleep times fixes these issues.

Fixes #2104

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2021-01-08 15:03:04 +00:00
Rob Bradford
72d054bf40 tests: Teporarily disable test_windows_guest_snapshot_restore
This test is reliably failing on our CI and we need time to investigate
why.

See: #2126

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-01-08 15:03:04 +00:00
Bo Chen
a286e960ed tests: Remove the check on the "booted" message in 'wait_vm_boot()'
Given we already check the connected IP address matches the expected
guest IP address, the check on the "booted" message is not needed.

Fixes: #2117

Signed-off-by: Bo Chen <chen.bo@intel.com>
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-01-08 12:54:35 +00:00
Rob Bradford
28abe63f46 tests: Fix test_virtio_block_disable_io_uring()
This test wasn't actually disabling io_uring.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-01-06 18:26:02 +00:00
Rob Bradford
49b49421d0 tests: Temporarily disable test_watchdog on aarch64
This test is very flaky and regularly causing CI failures. Until we can
identify the root cause we should disable this test.

See: #2103

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-01-06 18:26:02 +00:00
Rob Bradford
ef12216c19 tests: Add explicit QCOW2 based image test
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-01-06 18:26:02 +00:00
Rob Bradford
e05ed9240a tests: Use raw images for all tests
Simplify our image handling by not copying both QCOW2 and raw images for
every test. Allow the test to choose QCOW2 or raw by specifying the
image name manually. A follow on patch will add explicity QCOW2 tests.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-01-06 18:26:02 +00:00
Rob Bradford
c91d25ea64 tests: Don't swallow SSH errors
When an SSH command fails we want to be able to see, via a panic() why
and where it failed. Replace use of .unwrap_or_default() from SSH
command calls to ensure that we can see the location of the panic.

Also enhance the existing SSH output code to show the error if there is
one.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-01-06 13:51:26 +01:00
Rob Bradford
2e87d5ae02 tests: integration: Check different virtio-fs SHM region names
Depending on the kernel version the SHM region has a different name.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2021-01-04 22:44:40 +00:00
Rob Bradford
bb1ef5f1b8 tests: integration: Remove quiet from kernel command line
It will be useful to see kernel output from our integration tests when
they fail.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-12-18 16:05:14 +00:00
Rob Bradford
d9e1eec47d tests: integration: Use direct kernel boot for most tests
The boot time for direct kernel boot based tests is significantly
quicker than booting via the firmware and stock kernel as it triggers a
reboot during the boot process due to the initrd handling.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-12-18 16:05:14 +00:00
Rob Bradford
a4c076bd09 tests: integration: Don't always have kernel serial output
When doing a direct kernel boot only have console=ttyS0 in the command
line if we are explicitly testing the serial output. The default
behaviour is `--serial null` so this output will not be visible but will
trigger a KVM exit for every byte which is very costly when running
under nested virtualization.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-12-18 16:05:14 +00:00
Rob Bradford
873c79a931 tests: Add test_tap_from_fd()
This test creates new TAP device, opens it and then passed the fd in via
--net fd=<fd>

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-12-17 22:51:30 +01:00
Rob Bradford
3ee56112cb tests: Bump boot default timeout
Starting the virtio device threads from the VMM thread has slowed down
the start of the VM when running on a highly contested system like the
CI.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-12-17 11:23:53 +00:00
Rob Bradford
06f391e022 tests: integration: Retry epoll if we receive -EINTR or -EAGAIN
On the CI we are seeing that sometimes the epoll is receiving these
errors which do not indicate a failure but that we should retry.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-12-10 10:11:19 -08:00
Rob Bradford
1908f488c3 tests: Move tests from vhost_user_fs to virtiofsd-rs
Download and build virtiofsd-rs and then use that in the integration
test suite.

Fixes: #2013

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-12-01 11:13:21 +01:00
Rob Bradford
f271378811 tests: Wait for reboot in test_virtio_watchdog()
Aim to reduce flaky failures of this test by waiting for the VM to come
back after a reboot.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-11-18 18:27:34 +01:00
Rob Bradford
78b9edf848 tests: Get output from firmware and Linux for test_large_vm()
As we switched to focal for this test we no longer get any output during
the boot unless serial is used over virtio-console.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-11-18 18:27:34 +01:00
Rob Bradford
d0aebfb922 tests: Increase time waited for hotplugged memory to appear
There have been a lot of flakes around tests such as
test_virtio_fs_hotplug_dax_on_w_vhost_user_fs_daemon() or
test_virtio_fs_hotplug_dax_on() which all try and hotplug memory.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-11-18 18:27:34 +01:00
Rob Bradford
f913dd6150 tests: Add integration test to force io_uring off for block
Fixes: #1561

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-11-18 11:47:54 +01:00
Rob Bradford
fb70baece0 tests: Make integration test use vhost_user_{net,block} binaries
With the removal of vhost-user self-spawning support we should migrate
the tests to use the binaries so that we can remove the functionality
from the cloud-hypervisor binary itself.

See: #1925

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-11-18 11:46:32 +01:00
Anatol Belski
b399287430 memory_manager: Make addressable space size 64k aligned
While the addressable space size reduction of 4k in necessary due to
the Linux bug, the 64k alignment of the addressable space size is
required by Windows. This patch satisfies both.

Signed-off-by: Anatol Belski <anbelski@linux.microsoft.com>
2020-11-16 16:39:11 +00:00
Rob Bradford
ec84abc5c7 tests: Remove self spawning integration tests
Fixes: #1925

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-11-09 00:16:15 +01:00
Michael Zhao
164d481683 tests: Enable watchdog test case on AArch64
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-11-02 08:19:07 +00:00
Michael Zhao
a278704ae0 tests: Enable reboot test case on AArch64
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-10-30 17:14:44 +00:00
Michael Zhao
0f5e5d9e6d tests: Fix some build warnings in integration test on AArch64
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-10-30 17:14:12 +00:00
Michael Zhao
4606f0f28a tests: Make migration test case X86 only
Set the test case test_snapshot_restore X86 only, instead of excluding
it from test command line.

The command line option was added because we used to support migration
with Virtio-MMIO, but not Virtio-PCI.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-10-30 17:14:12 +00:00
Bo Chen
8c268e351c tests: Port more tests to use wait_vm_boot
Tests not ported include 1) the ones that start guest VMs without
network (e.g. test_net_hotplug, test_initramfs), 2) test_vfio that
involves l2 guest. Also, some tests that use bionic guest image are
given extended timeout (120s) for 'wait_vm_boot'.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-10-29 15:30:17 +00:00
Bo Chen
a79f058a90 tests: Accept custom timeout for wait_vm_boot
This allows known slow tests to have a longer/customized timeout while
keeping the default timeout short.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-10-29 15:30:17 +00:00
Bo Chen
26783fea89 tests: Wait explicitly for vm shutdown w/ the 'wait-timeout' crate
Instead of waiting blindly with fixed amount of sleeping time, we can
use the `wait-timeout` crate to explicitly wait VM shutdown (with a
timeout). It can reduces the execution time of some tests
substantially. Also, this patch increases the `shutdown` timeout for
'test_reboot', which should fix the recent sporadic failures on this
test.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-10-29 15:30:17 +00:00
Bo Chen
8c92d1dbdc tests: Wait explicitly for the guest vm to boot
Instead of blindly waiting for 20-40s for the guest VM to boot, this
patch waits the notification from the guest VM explicitly by using a
simple TcpListener on the host and a custom systemd service in the
guest.

This patch also ported few tests to use this new machanism, while more
tests are to be ported.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-10-28 11:27:25 -07:00
Wei Liu
255dbd29ef tests: factor out windows_auth
This avoid repetition once we have more Windows tests.

No functional change.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-10-22 18:23:08 +02:00
Wei Liu
2902a96ae6 tests: add Windows guest snapshot test
We also need to restrict the number of test threads to 1 to avoid tests
interfere with each other.

Signed-off-by: Wei Liu <liuwe@microsoft.com>
2020-10-22 18:23:08 +02:00
Sebastien Boeuf
89b3d7b49b ci: Update integration tests with latest balloon changes
Now that virtio-balloon is not declared as part of the --memory
parameter, the integration tests are updated to keep the correct
behavior.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-10-22 16:33:16 +02:00
Rob Bradford
700f63fad8 tests: Add integration test for virtio-watchdog
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-10-21 16:02:39 +01:00
Bo Chen
e83d99ab10 tests: Run binary with INFO (-v) level logging
Given the increased amount of output from cloud-hypervisor, this patch
also increased the PIPE_SIZE to 32MB (from 256KB).

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-10-21 08:48:28 +01:00
Bo Chen
e869d2f1bc tests: Print full commandline for better debugging
This patch prints the complete commandline when launching
cloud-hypervisor. It also prints the details of the `ssh` command if
the command is failing.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-10-21 08:48:28 +01:00
Sebastien Boeuf
8b9c9bc97f ci: Remove all references to 'mmio' feature
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-10-19 14:58:48 +01:00
Rob Bradford
d598341534 tests: Add Windows guest integration test
This is a new integration test running Windows as a guest with Cloud
Hypervisor. Once the VM is booted, the test connects to the guest
through SSH and shutdown the VM. If this succeeds, this means the VM
was properly booted to userspace and that the network was functional.

Important to note that because this test generates lots of logs, it
requires a large pipe size for both stdout and stderr.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-10-14 11:19:29 +02:00
Rob Bradford
0eabc00b27 tests: Allow controlling the password for SSH auth
The login details for the Windows VM are different.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-10-14 11:19:29 +02:00
Sebastien Boeuf
9d882bc8fe ci: Add integration test for testing maximum physical bits
Introduce a new test that will validate the new option `max_phys_bits`
from the `--cpus` parameter behaves as expected.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-10-13 18:58:36 +02:00
Sebastien Boeuf
67025948dc ci: Simplify test scripts
Since all unit and integration tests are run inside containers because
they are called from dev_cli.sh, they always run as root. That's why
both unit and integration scripts can be simplified as they don't need
to apply specific capabilities and run cargo tests in a dedicated 'kvm'
group.

Fixes #1683

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-10-07 14:26:13 +02:00
Sebastien Boeuf
162789a2d1 ci: Extend virtio-blk hotplug integration test
The existing virtio-blk hotplug test is extended by removing and
re-adding the virtio-blk device. This ensures the unplug/re-plug
feature is properly tested.

Fixes #1809

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-10-06 17:22:29 +01:00
Sebastien Boeuf
14163c5200 ci: Extend virtio-net hotplug integration test
The existing virtio-net hotplug test is extended by removing and
re-adding the virtio-net device. This ensures the unplug/re-plug
feature is properly tested.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-10-06 17:22:29 +01:00
Bo Chen
1d3c3bc6ec tests: Capture child process stdout/err in 'test_memory_mergeable'
Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-09-25 08:40:23 +02:00
Bo Chen
2441798fe4 tests: Resize the pipe size to 256K for capturing child stdout/err
As discussed in #1707, the `vcpu` thread can be stalled when using
`--serial tty`. To workaround that issue, this patch enforces to resize
the pipe size to 256K when we capture the stdout/stderr of the
cloud-hypervisor child process in the integration tests. Note that the
pipe size (256K) is chosen based on the output size of our integration
tests at this point, which may need to be increased in the future.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-09-25 08:40:23 +02:00
Bo Chen
365b947023 tests: Port test_simple_launch to the new methodology
This is the last test to be ported to the new methodology.

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-09-25 08:40:23 +02:00
Bo Chen
cb2f11724a tests: Port test_reboot to the new methodology
Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-09-25 08:40:23 +02:00
Henry Wang
c85c1f0d76 ci: AArch64: enable snapshot/restore integration test case
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2020-09-23 12:37:25 +01:00
Sebastien Boeuf
5a3d54fa19 ci: Extend virtio-mem integration test with reboot
Now that virtio-mem supports reboot, we extend the existing integration
tests to validate the amount of RAM after reboot is the same as before
the reboot, but also that we can still resize down the VM or the memory
zone after the reboot.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-09-16 19:20:04 +02:00
Sebastien Boeuf
9d8672afc6 ci: Extend guest NUMA integration test with memory zone resizing
Extend the existing test to validate that each NUMA node gets assigned
the right amount of memory after each memory zone has been resized.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-09-16 19:20:04 +02:00
Sebastien Boeuf
5823c12eab ci: Extend memory zone integration test with 'resize-zone'
Now that we can resize each memory zone independently, this commit
extends the memory zone related test by validating 'vm.resize-zone'
works correctly.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-09-16 19:20:04 +02:00
Sebastien Boeuf
56b0c85578 ci: Introduce SGX integration testing
Extending the Cloud-Hypervisor CI to allow for testing SGX on a
dedicated machine where special image and kernels are ready.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-09-09 15:33:49 +02:00
Sebastien Boeuf
e15dba2925 vmm: Rename NUMA option 'id' into 'guest_numa_id'
The goal of this commit is to rename the existing NUMA option 'id' with
'guest_numa_id'. This is done without any modification to the way this
option behaves.

The reason for the rename is caused by the observation that all other
parameters with an option called 'id' expect a string to be provided.

Because in this particular case we expect a u32 representing a proximity
domain from the ACPI specification, it's better to name it with a more
explicit name.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-09-07 07:37:14 +02:00
Sebastien Boeuf
bf5e028016 ci: Update memory zone and NUMA integration tests
Since both --memory-zone and --numa parameters have been updated with
addition and removal of multiple options, this commit updates the
related integration tests to ensure they are still valid.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-09-07 07:37:14 +02:00
Bo Chen
4392a1484c tests: Port test_bzimage_reboot to the new methodology
Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-09-03 17:47:14 +01:00
Bo Chen
ded376c6e1 tests: Port test_console_file to the new methodology
Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-09-03 17:47:14 +01:00
Bo Chen
a4abb7f8e5 tests: Port test_virtio_console to the new methodology
Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-09-03 17:47:14 +01:00
Bo Chen
aac0cba0d1 tests: Port test_serial_file to the new methodology
Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-09-03 17:47:14 +01:00
Bo Chen
9686aef2c9 tests: Port test_serial_tty to the new methodology
Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-09-03 17:47:14 +01:00
Bo Chen
4e0e3d6221 tests: Port test_serial_null to the new methodology
Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-09-03 17:47:14 +01:00
Bo Chen
9e7e64d2a3 tests: Port various integration tests to new methodology
This patch ported many tests to the new methodology, where the guest log
will be printed only when the test is failing.

Things to finish in follow-up PRs:

1. Special tests not ported yet include: test_reboot,
test_bzimage_reboot, test_serial_null(), test_serial_tty(),
test_serial_file(), test_virtio_console(), test_console_file(),
and test_simple_launch.

2. Few direct calls to 'Command::new(clh_command("cloud-hypervisor"))',
which is still printing the guest console

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-09-03 08:13:20 +02:00
Sebastien Boeuf
5d80bc2339 ci: Add distance validation to NUMA integration test
By extending the existing NUMA integration test, this commit validates
the proper distances between NUMA nodes are exposed to the guest.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-09-01 18:09:01 +02:00
Sebastien Boeuf
d6fc18da9e ci: Add CPUs validation to the NUMA integration test
Extend the existing NUMA integration to validate that specifying CPUs
for each NUMA node gets propagated to the guest.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-09-01 15:25:00 +02:00
Sebastien Boeuf
36171caba9 ci: Add integration test for defining NUMA nodes in the guest
This new test validates the guest OS can find the NUMA nodes which have
been defined by the user through the CLI, and that the right amount of
memory is associated with each node.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-09-01 14:11:49 +02:00
Michael Zhao
a1c4c77cd8 tests: Enable test cases checking PCI MSI on AArch64
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-08-31 08:20:42 +02:00
Michael Zhao
2b8e08bd36 tests: Enable test_multi_cpu case on AArch64
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-08-31 08:20:42 +02:00
Michael Zhao
85c9bd0f47 tests: Enable vhost-user-net self-spawned test cases
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-08-31 08:19:23 +02:00
Sebastien Boeuf
1b4591aecc vmm: memory_manager: Apply NUMA policy to memory zones
Relying on the new option 'host_numa_node' from the 'memory-zone'
parameter, the user can now define which NUMA node from the host
should be used to back the current memory zone.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-08-27 08:39:38 -07:00
Sebastien Boeuf
7b898285d5 ci: Extend integration tests with user defined memory zones
Adding a small test to validate that user defined memory zones work as
expected when using --memory-zone option.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-08-25 16:43:10 +02:00
Michael Zhao
24fb5c8387 tests: Enable test case test_counters on AArch64
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-08-18 08:10:04 +02:00
Rob Bradford
fd48779a0d tests: Port test_initramfs to new methodology
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-08-13 13:03:22 +02:00
Rob Bradford
dd39aedde1 tests: Port test_memory_mergeable to new methodology
As a compromise we only print out the first child's output.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-08-13 13:03:22 +02:00
Rob Bradford
9dd4625fb4 tests: Port test_virtio_vsock to new methodology
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-08-13 13:03:22 +02:00
Rob Bradford
4983e5c322 tests: Port test_virtio_pmem to new methodology
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-08-13 13:03:22 +02:00
Rob Bradford
32b70e354c tests: Port virtiofs tests to new methodology
This required a bit of rearranging as it is not possible to call
prepare_daemon() inside a catch_unwind{} block.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-08-12 14:53:02 +01:00
Rob Bradford
23174800ca tests: Port vhost_user_block tests to new methodology
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-08-12 14:53:02 +01:00
Rob Bradford
8f4e1382a9 tests: Port vhost_user_net tests to new methodology
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-08-12 14:53:02 +01:00
Rob Bradford
effff460d4 tests: Port test_cpu_topology to new test methodology
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-08-12 14:53:02 +01:00
Rob Bradford
d749aa2e6b tests: Port test_vfio to new test methodology
Now the testing aspects are run inside a panic handler block rather than
inside a credibility TestBlock. If the test fails then the output from
the cloud-hypervisor binary is then presented.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-08-12 12:19:34 +02:00
Rob Bradford
4ef702ea76 tests: Use a disk image for test_vfio rather than virtio-fs
This reduces the complexity of the test slightly. The PCI BDFs in the L1
needed changing as the block devices come before the network ones.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-08-12 12:19:34 +02:00
Rob Bradford
070f47246c tests: Port test_snapshot_restore to new methodology
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-08-11 12:57:18 +02:00
Rob Bradford
6cd31e7a4d tests: Introduce new test methodology
Rather than using a credible TestBlock to capture the test assertions
instead use a catch_unwind block to catch the panic and turn
it into a Result<>.

If block panicked or the child binary had non-zero exit then, and only
then, print out the child output.

This results in a clearer test output with no interleaving.

Currently only test_counters is ported to this methodology to
demonstrate its use.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-08-11 12:57:18 +02:00
Michael Zhao
f2db346127 tests: Enable more integration test cases on AArch64
Enabled 3 test cases:
- test_large_vm
- test_huge_memory
- test_serial_null

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-08-05 08:15:18 +01:00
Henry Wang
a47da51539 ci: AArch64: Enable basic virtio_vsock test case for AArch64
This commit enables the test case for testing the basic function
of virtio_vsock (i.e. without the hotplug).

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2020-08-04 13:16:14 +01:00
Henry Wang
61c093f724 ci: AArch64: Enable api_create_boot for AArch64
This commit enables the `api_create_boot` case in the integration
test as the test for the Cloud Hypervisor API server functionality.

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2020-08-03 14:15:14 +01:00
Henry Wang
d5863caa4d ci: AArch64: Enable virtio-fs integration test
This commit enables the virtio-fs related integration test cases
for AArch64.

Note that to run virtio-fs cases, the host kernel should be
newer than v5.5.

Fixes: https://github.com/cloud-hypervisor/cloud-hypervisor/issues/1516

Signed-off-by: Henry Wang <henry.wang@arm.com>
2020-07-31 14:06:55 +02:00
Michael Zhao
fec54f71b0 tests: Enable PCI integration test cases on AArch64
Enabled a minimum set of PCI test case.
More cases are to be adapted or debugged.

Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-07-30 09:52:12 +02:00
Michael Zhao
b363d1c706 tests: Enable integration test for initramfs on AArch64
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
2020-07-20 14:20:53 +01:00
Henry Wang
f449aec78e ci: AArch64: Enable AArch64 mmio-related integration test cases
This commit enables some mmio-related integration test cases on
AArch64, including:
* some vhost_user test cases
* virtio-blk test cases
* pmem test cases

Also this commit contains a bug fix in creating virtio-blk device.
Previously, when creating the FDT, the virtio-blk device was
labeled in the reverse order of address allocation.

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2020-07-20 11:45:47 +01:00
Sebastien Boeuf
8be80aca80 ci: Give some time to the disk hotplug
Under high load, the VM might take some time to hotplug the disk after
the hotplug command has been issued. For this reason, let's put a 10s
sleep before checking for the presence of the new disk.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-13 12:19:24 +02:00
Sebastien Boeuf
802f02532a ci: Extend test_vfio time before VM is ready
We want to give the time to the nested VM to be fully ready before we
check it's correctly setup. This involves 3 layers of virtualization
when running the CI on Azure, which added to the high load happening
because of the parallelization, adds up to the start up time.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-13 12:19:24 +02:00
Rob Bradford
81ce8f505c tests: Enable virtio-mmio tests for virtio-console
This is useful to ensure that virtio-console support is covered.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-13 10:16:03 +02:00
Rob Bradford
6161d3bef8 tests: Enable virtio-vsock testing with virtio-mmio transport
As compiling without acpi (implied by mmio) means that the VM will
terminate on i8042 reset we cannot test the reboot.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-10 07:22:37 +02:00
Rob Bradford
bb6b738c0d tests: Enable test_multiple_network_interfaces with virtio-mmio
Ensure that multiple network interfaces function correctly when using
virtio-mmio.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-09 09:53:30 +02:00
Rob Bradford
730f3884f4 tests: Enable test_virtio_blk with virtio-mmio transport
This test makes use of MQ support in virtio-block so it is advisable to
test with virtio-mmio.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-09 09:53:13 +02:00
Rob Bradford
d725c2cbfb tests: Enable virtio-mem testing with virtio-mmio
Try and enable virtio-mem testing when using the virtio-mmio transport.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-09 09:52:56 +02:00
Sebastien Boeuf
ef554ba13c ci: Increase time to stabilize memory measurement
Check if increasing the time after the VM is spawned help with getting
more stable numbers for the base PSS.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-07 19:36:12 +02:00
Hui Zhu
b59f231092 tests: Add integration test to test_memory_hotplug for virtio-balloon
Signed-off-by: Hui Zhu <teawater@antfin.com>
2020-07-07 17:25:13 +01:00
Henry Wang
33c5d6bb98 tests: Enable test_aarch64_pe_boot case for AArch64
The compiled AArch64 linux kernel by running `make` is in PE format
instead of vmlinux, vmlinux.pvh and bzImage format. Therefore we
need to add integration test for this case.

Signed-off-by: Henry Wang <Henry.Wang@arm.com>
2020-07-07 13:55:39 +01:00
Sebastien Boeuf
bb9174601a ci: Separate parallel vs sequential tests
In order to differentiate tests that can be run in parallel versus
tests that must be run on their own, we move all tests into dedicated
modules.

The point is to avoid glitches in results that can be caused by the fact
that other tests (hence VMs) are running at the same time.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-03 13:08:37 +01:00
Sebastien Boeuf
c2920d2b6b ci: Move from Clear Linux to Ubuntu Focal Fossa cloud image
Move the CI to rely entirely on Ubuntu cloud images. It's worth noting
that both QCOW2 and RAW images from Ubuntu Focal Fossa have been
modified to include the tools needed from integration tests.
This means fio, iperf, iperf3, netcat and socat have been added to the
image. The snapd package have been fully removed as it was expecting the
support for squashfs (not present when using our own kernel from direct
kernel boot), which was causing some failures, and was preventing
cloud-init from terminating properly.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-07-02 13:47:16 +02:00
Rob Bradford
135ee4568e tests: Enhance rate_limited_copy() to also consider free disk space
With QCOW disk images the space needed is greater than the size of the
iamge as any "zero" blocks in the image are allocated when they are
touched making the image bigger.

Here we add a threshold of 6GiB with added debugging messages to ensure
that there is sufficient disk space to run the tests.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-07-02 11:52:49 +02:00
Sebastien Boeuf
514978b54a ci: Improve test_snapshot_restore with multiple vCPUs
Extend the existing integration test test_snapshot_restore by testing
with more than one vCPU.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-06-30 14:03:03 +01:00
Rob Bradford
48a05c4727 tests: Add simple counters integration test
Add a simple test to check that the data from the counters matches what
is expected and that the value of the counters increases after an
operation that will hit all counters.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-06-25 07:02:44 +02:00
Rob Bradford
4b64f2a027 vmm: cpu: Reuse already allocated vCPUs if available
When a request is made to increase the number of vCPUs in the VM attempt
to reuse any previously removed (and hence inactive) vCPUs before
creating new ones.

This ensures that the APIC ID is not reused for a different KVM vCPU
(which is not allowed) and that the APIC IDs are also sequential.

The two key changes to support this are:

* Clearing the "kill" bit on the old vCPU state so that it does not
  immediately exit upon thread recreation.
* Using the length of the vcpus vector (the number of allocated vcpus)
  rather than the number of active vCPUs (.present_vcpus()) to determine
  how many should be created.

This change also introduced some new info!() debugging on the vCPU
creation/removal path to aid further development in the future.

TEST=Expanded test_cpu_hotplug test.

Fixes: #1338

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-06-23 14:11:14 +01:00
Sebastien Boeuf
b5cf150ac3 ci: Update test_snapshot_restore by resuming the VM
Now that snapshot/restore is symmetrical, that is the VM must be paused
before it is snapshot and it must be resumed after it's been restored,
the integration test is updated accordingly.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-06-23 10:15:03 +02:00
Rob Bradford
798f3f01a9 tests: Add integration tests for CPU topology
Add multiple integration tests with various different CPU topologies and
check that they work as expected.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-06-17 12:18:09 +02:00
Sebastien Boeuf
4f311b56eb ci: Extend integration tests for checking PCI hotplug response
Upon PCI hotplug, the VMM now returns some information about the device
name and the associated b/d/f. This patch extends the integration tests
so that we validate the response is the one that is expected.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-06-12 13:37:18 +01:00
Bo Chen
cc85d896a5 tests: Extend test_*_reboot with checks on fd leaking
This revised version of the patch reuses the back-off strategy from
'ssh_command()' to deal with varying booting time.

Fixes: #1209

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-06-10 13:54:18 +01:00
Rob Bradford
aa79a92c35 tests: Add integration test for unprivileged network
This tests whether we can have a working network without having
CAP_NET_ADMIN.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-06-08 17:56:10 +02:00
Bo Chen
a8cdf2f070 tests,vm-virtio,vmm: Use 'socket' for all CLI/API parameters
This patch unifies the inconsistent uses of 'socket' and 'sock' from our
CLI/API parameters.

Fixes: #1091

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-06-08 17:41:12 +02:00
Rob Bradford
eabf43fbf6 Revert "tests: Extend test_*_reboot with checks on fd leaking"
This reverts commit 7dc4e91303.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-06-05 14:09:17 +01:00
Bo Chen
7dc4e91303 tests: Extend test_*_reboot with checks on fd leaking
Fixes: #1209

Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-06-04 20:48:44 +01:00
Rob Bradford
af8292b623 vmm, config, vhost_user_blk: remove "wce" parameter
This config option provided very little value and instead we now enable
this feature (which then lets the guest control the cache mode)
unconditionally.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-21 08:40:43 +02:00
Sebastien Boeuf
a7f236b896 ci: Extend snapshot/restore to validate virtio-vsock
Now that snapshot/restore support has been enabled for virtio-vsock, the
corresponding integration test is expanded with some validation that
virtio-vsock supports to be snapshot and restored.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-05-19 18:52:08 +02:00
Sebastien Boeuf
f975998875 ci: Extend snapshot/restore test with virtio-iommu
When compiled with pci feature, the integration test now validates that
/dev/vdb can be correctly read while being placed behing a virtual
IOMMU.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-05-19 09:03:41 +01:00
Sebastien Boeuf
9f2eddd9d8 ci: Fix test_serial_off
The integration test validating that --serial off works correctly was
not properly written as it was using the FW, which by default would use
the kernel command line found in the EFI partition. Unfortunately, this
kernel command line was including "console=ttyS0", which causes the
kernel to try to write to the serial port, even if there's no serial
port being emulated.

The problem is, when no emulation of the serial port is provided, the
default value returned on 0x3f8 is 0, which makes the guest kernel think
that some data needs to be read.

The only way to avoid all this is by ensuring we can control the kernel
command line by removing any occurence of "console=ttyS0" from it.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-05-19 09:22:09 +02:00
Rob Bradford
391508f054 tests: Add tests checking for host MAC address setting
Extend the set of tests we have for virtio-net and vhost-user-net to
check for host MAC address setting.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-15 11:45:09 +01:00
Sebastien Boeuf
ba4ec7fce2 ci: Extend snapshot_restore_test with hotplug
There's a simple way to trigger PCI BAR reprogramming for a given
device, by removing it and then hotplugging it back. The Linux kernel
will simply choose to place the BARs at different location than the ones
chosen by Cloud-Hypervisor. By doing so, and creating the snapshot after
this hotplug operation, we can manage to validate that the resource are
correctly restored for a given virtio-pci device.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-05-14 11:02:22 +02:00
Sebastien Boeuf
9e165c2c17 ci: Enable snapshot/restore integration test
Now that snapshot/restore feature is stable for both virtio-mmio and
virtio-pci devices, we re-enable the integration test for validating
snapshot/restore does not get broken.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-05-14 11:02:22 +02:00
Rob Bradford
80aa0a753d tests: Test unplugging virtio-fs
Now that virtio-fs has unplug support try unplugging and readding the
virtio-fs device.

Fixes: #1050

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-13 09:11:50 +01:00
Rob Bradford
36bffff22a tests: Expand the test_large_memory() test to cover lots of vCPUs
Ensure that there is no regression in our support for a large number of
vCPUS.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-11 19:34:34 +01:00
Rob Bradford
16ac24d8f7 tests: Only test "noacpi" test when we don't build with ACPI
The mmio integration test build currently doesn't use ACPI so piggyback
on that test variation.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-11 19:34:34 +01:00
Rob Bradford
52ac3779df tests: Remove network interface from test_memory_overhead
Continue to try and track down the instability in the numbers generated
by this test by removing the (unused) network interface. It's possible
we are getting broadcast packets into the tap device and generating a
variable size of allocations.

See: #760

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-11 11:27:19 +02:00
Rob Bradford
592de97fbd vhost_user_net: Use config::OptionParser to simplify net backend parsing
Switch to using the recently added OptionParser in the code that parses
the network backend.

Whilst doing this also update the net-backend syntax to use "sock"
rather than socket.

Fixes: #1092
Partially fixes: #1091

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-11 09:40:40 +02:00
Rob Bradford
9adc32a043 tests: Print out details for smaps in test_memory_overhead
To aid the debugging of why the test_memory_overhead sometimes fails
print a details of all the named regions that it uses in its
calculation.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-07 17:53:47 +02:00
Rob Bradford
250f825f58 tests: Check that requesting tap name for virtio-net succeeds
When requesting a specific tap name with virtio-net check that that tap
device is created.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-07 13:41:00 +02:00
Rob Bradford
006da0405e tests: Check tap name provided is used for vhost_user_net tests
If a preferred tap name is given check that it is created.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-07 13:41:00 +02:00
Rob Bradford
54b3329f0c tests: Add tests that use (non-existing) named tap
The current tests support giving a tap name but they only test with tap
interfaces that already exist.

Fixes: #871

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-07 13:41:00 +02:00
Rob Bradford
b8841d7a82 tests: Validate vsock functionality works across a reboot
Reboot the VM and check that the vsock functionality is preserved.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-05 13:01:38 +02:00
Rob Bradford
cb220ae184 tests: Add some debugging to test_memory_overhead
This test is flaky. Add some debugging to identify what the bad value
is.

See: #760

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-05-05 11:35:12 +02:00
Rob Bradford
d5bfa2dfc8 vmm, vhost_user_block: Make parameter names match --disk
Make the --block-backend parameters match the --disk parameters.

Fixes: #898

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-04-30 15:20:55 +02:00
Samuel Ortiz
ce794f7858 ci: Pass target triple to the test scripts
We pass it to the integration and unit tests script through --libc.
Cargo tests are left unmodified.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2020-04-29 17:57:01 +01:00
Rob Bradford
3012975c17 tests: Enhance vsock integration test to support hotplug
Test basic vsock functionality works with hotplugged vsock device.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-04-29 12:44:49 +01:00
Rob Bradford
1df38daf74 vmm, tests: Make specifying a size optional for virtio-pmem
If a size is specified use it (in particular this is required if the
destination is a directory) otherwise seek in the file to get the size
of the file.

Add a new check that the size is a multiple of 2MiB otherwise the kernel
will reject it.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-04-24 18:30:05 +01:00
Bo Chen
3f42f86d81 vmm: Add the 'shared' and 'hugepages' controls to MemoryConfig
The new 'shared' and 'hugepages' controls aim to replace the 'file'
option in MemoryConfig. This patch also updated all related integration
tests to use the new controls (instead of providing explicit paths to
"/dev/shm" or "/dev/hugepages").

Fixes: #1011

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Signed-off-by: Bo Chen <chen.bo@intel.com>
2020-04-23 21:39:51 +02:00
Rob Bradford
c790bba905 tests: Migrate from Ubuntu Eoan to Focal
This is the latest LTS release.

Fixes: #989

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-04-23 13:01:02 +02:00
Sebastien Boeuf
3e8a6ba0c0 ci: Ignore test_snapshot_restore
The newly added integration test "test_snapshot_restore" is very
unstable, which causes our CI to fail on most pull requests, which is
not acceptable. That's why we ignore this test until we can fix the
stability issue.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-04-23 11:38:47 +02:00
Sebastien Boeuf
f6b150a34d ci: Add integration test for VM migration
Now that we have multiple virtio devices supporting snapshot and restore
operations, we can add a new integration test to validate the migration
feature works as expected.

The important part is virtio-net as it is used to ssh into the VM to
verify the VM has been restored in the proper state.

This test only works for virtio-mmio for now. Further support for
testing virtio-pci will be added once the virtio-pci transport layer
will support migration.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-04-22 22:19:31 +02:00
Sebastien Boeuf
c23b48888d ci: Factorize virtio-fs hotplug integration tests
There is some duplication between regular and hotplug virtio-fs tests
that can be factorized by adding a simple hotplug flag to choose if each
test should run with or without hotplugging the device.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-04-20 20:36:26 +02:00
Dean Sheather
f68b08bfdb tests: add integration tests for vm.add-fs route
Adds integration tests with and without dax for the new vm.add-fs route.

Signed-off-by: Dean Sheather <dean@coder.com>
2020-04-20 20:36:26 +02:00
Rob Bradford
ea82632c70 tests: Enhance test_pmem_hotplug to also unplug device
Ensure that the device is removed and the removed device stays away
after a reboot.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-04-16 17:03:25 +02:00
Rob Bradford
6389418fa6 tests: Enhance test_disk_hotplug to also unplug device
Ensure that the device is removed and the removed device stays away
after a reboot.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-04-16 17:03:25 +02:00
Alejandro Jimenez
4617aefd60 tests: Test initramfs loading with PVH boot
Add an integration test to verify loading an initramfs using the
PVH boot protocol.

Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
2020-04-09 17:28:03 +02:00
Sebastien Boeuf
0c29c2ec49 ci: Extend VFIO test with memory hotplug
One more time, we're extending the VFIO integration test to verify that
a VFIO device passed through a VM is still usable after some new memory
has been hotplugged.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-27 09:35:39 +01:00
Damjan Georgievski
3b470d4f4b tests: add support for initramfs
the integration test creates an initramfs image based on AlpineLinux mini root filesystem
with a simple /init script that just echoes a string to the console. The string
is passed via the kernel cmdline as an environment variable.

Signed-off-by: Damjan Georgievski <gdamjan@gmail.com>
2020-03-26 11:59:03 +01:00
Rob Bradford
4b110d5b73 tests: Add integration test for hotplugging network device
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-25 17:58:06 +01:00
Hui Zhu
abbd69abee tests: Add integration test test_virtio_mem
Add integration test test_virtio_mem for virtio-mem.

Signed-off-by: Hui Zhu <teawater@antfin.com>
2020-03-25 15:54:16 +01:00
Rob Bradford
8d05fb86e3 tests: Add integration test for hotplugging pmem device
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-25 13:18:17 +01:00
Rob Bradford
96d4f1e39e tests: Add integration test for hotplugging disk device
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-25 09:35:53 +00:00
Sebastien Boeuf
c1e6d0022b ci: Add memory resizing use case to vhost-user tests
All vhost-user-blk, vhost-user-net and virtio-fs integration tests are
extended with memory resizing. The point is to validate that we can
hotplug some memory and keep these backends to work as expected.

Just a note that because memory resizing is not supported by mmio, we
limit these extensions to all non-mmio use cases.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
890582b5a2 ci: Factorize kernel command line
The same Clear Linux kernel command line was repeated again and again in
the code. That's why this commit takes care of factorizing it, which
simplifies the code but also simplify maintenance whenever we'd need to
update the block UUID.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
4de258477e ci: Fix mmio tests with direct kernel boot
The hypervisor-fw does not support virtio-blk through mmio transport
layer, therefore we can only run tests with mmio if these tests boot
directly to kernel.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
f2682463a4 ci: Factorize integration tests booting from vhost-user-blk
Remove duplicated code for all boot related tests relying on
vhost-user-blk.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
5a5b3cf23b ci: Factorize vhost-user-blk integration tests
All the non-boot related vhost-user-blk tests are factorized to remove
code duplication.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
dd8debf201 ci: Run vhost-user-blk tests for mmio builds
There's no reason mmio builds cannot support vhost-user-blk, therefore
there's no reason to skip these tests for mmio.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
0c9c72c583 ci: Unify vhost-user-blk integration tests
As a first step towards factorizing as many vhost-user-blk tests as
possible, this patch takes care of unifying their expected output.

It also makes a clear separation between the tests booting from
vhost-user-blk from the ones passing an extra volume.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
c95851f48f ci: Run vhost-user-net tests for mmio transport
No reason to skip vhost-user-net integration tests for the mmio
transport build.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Sebastien Boeuf
68293fc0e8 ci: Factorize vhost-user-net one step further
In order to limit code duplication, vhost-user-net integration tests are
further factorized, as they now include the self spawning test.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-24 19:01:15 +00:00
Rob Bradford
bdcfe1efbd tests: Add "discard_writes" pmem test
Factorise test_virtio_pmem to test changes are not persisted if file is
readonly.

As virtio-mem is now supported in the upstream kernel we can switch to
using the firmware.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-20 14:46:34 +01:00
Rob Bradford
70986022d8 tests: Make the test_virtio_pmem test use a temporary file
Rather than using a raw OS disk image. This will be useful when the test
is extended to doing I/O on the image.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-20 14:46:34 +01:00
Rob Bradford
0788600702 build: Remove "pvh_boot" feature flag
This feature is stable and there is no need for this to be behind a
flag. This will also reduce the time needed to run the integration test
as we will not be running them all again under the flag.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-19 13:05:44 +00:00
Alejandro Jimenez
efb2447801 pvh: Add integration test to validate PVH boot
Add an integration test that builds cloud-hypervisor with
the pvh_boot feature and boots a kernel built with CONFIG_PVH.

Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
2020-03-13 18:29:44 +01:00
Rob Bradford
abccf766ce tests: Use ch-remote to add/remove devices in test_vfio
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-12 12:56:10 +01:00
Rob Bradford
5c3ce9dd00 tests: Extend ch-remote helper to support optional single argument
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-12 12:56:10 +01:00
Sebastien Boeuf
34412c9b41 vmm: Add id option to VFIO hotplug
Add a new id option to the VFIO hotplug command so that it matches the
VFIO coldplug semantic.

This is done by refactoring the existing code for VFIO hotplug, where
VmAddDeviceData structure is replaced by DeviceConfig. This structure is
the one used whenever a VFIO device is coldplugged, which is why it
makes sense to reuse it for the hotplug codepath.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-11 19:50:31 +01:00
Rob Bradford
911a2d61d7 tests: Use ch-remote to resize the VM
Remove manually constructed API request in the integration tests.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-11 08:22:09 +01:00
Sebastien Boeuf
f7277140bb ci: Add integration test for VFIO hot-unplug
Extend the existing test_vfio by unplugging the previously hotplugged
device.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-10 17:05:06 +00:00
Rob Bradford
16fd506bb8 tests: Use new ch-remote for pause/resume integration test
Replace the use of a manual curl command with the new ch-remote tool.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-09 15:03:01 +00:00
Cathy Zhang
be6f91d0d1 tests: Refactoring vhost_user_net test cases
Signed-off-by: Cathy Zhang <cathy.zhang@intel.com>
2020-03-05 15:09:20 +00:00
Rob Bradford
42148063ec tests: Remove further use of sudo subshells
Replace sudo invocations of bash creating a subshell with simpler
solutions by running the program directly on the input or using tee.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 20:54:46 +01:00
Rob Bradford
2baf5ab80d tests: Simplfy the shm region check
There is no need to spawn a subshell in this case as grep can open the
file directly.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 20:54:46 +01:00
Rob Bradford
97affbebfe tests: Re-enable the virtio-fs tests and make them work with virtio-mmio
As part of bringing the tests up with virtio-mmio the virtio-fs were
wrongly disabled. Re-enable them and remove the cache size check as the
cache does not appear in /proc/iomem on virtio-mmio.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 20:54:46 +01:00
Rob Bradford
7b1d5c1ad9 tests: Remove entropy check from vhost-user-block test
When booting from vhost-user-block the entropy is sometimes lower
triggering a flaky test. We have already use other, more reliable
methods for checking that the VM has booted.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 20:54:46 +01:00
Sebastien Boeuf
1152b1a147 ci: Add VFIO hotplug integration test
This commit extends the existing test_vfio by hotplugging an extra
virtio-net device to the L2 VM. The test for validating the hotplug
succeeded is the same as the one to verify the non-hotplugged devices.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-04 12:06:02 +00:00
Rob Bradford
22dd49d0b5 tests: Test virtio-fs with virtio-mmio
Now that virtio-mmio transport has support for SHM regions we should be
able to test virtio-fs against it.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-03-04 09:40:25 +01:00
Sebastien Boeuf
0223cf8c2b ci: Update ClearLinux image
A new ClearLinux image has been uploaded to the Azure storage account.
It is based off of the ClearLinux cloudguest image 31310 version, with
three extra bundles added to it.

First bundle is curl, which adds the curl binary to the image, second
bundle is iperf, adding the iperf binary to the image, and third bundle
is sysadmin-basic to include utility like netcat.

The image is 2G in size.

Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
2020-03-04 07:31:15 +00:00
Rob Bradford
5ade9d4610 tests: Remove unnecessary sleeps and kill on clean shutdown tests
On tests that expect a clean shutdown there is no need to try and kill
the child after wait() has returned as the process has already exited.
Further there is no need to sleep before wait() as wait will block until
the VM and VMM shutdown is complete.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
c98949bdd3 tests: Wait for VMM to exit in test_serial_file/test_console_file
This should address any flakiness as the VMM process will have
completely terminated and all files closed.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
2f58fb8307 tests: Test rebooting works for block self spawn test
Being able to reboot the VM is an important aspect of the self spawning
behaviour.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
e817aa6824 tests: Improve VM shutdown behaviour
Many of the tests attempted to SSH into the VM and then run "shutdown"
but don't actually check that the VM has shutdown correctly and proceed
to kill the child process. Remove the associated SSH commands and sleeps
from those tests that are not explicitly checking the shutdown
behaviour.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
559b70cf0a tests: Make output capture optional
Only some tests require the output for the tests to be captured so
default to not capturing the output to a pipe and instead make it
controllable.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
dae7608b1e tests: Remove duplicated network configuration
Many of the tests use an identical network configuration. Add a
GuestCommand::default_net() to generate this configuration and use it
wherever possible.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
6466ad2112 tests: Remove duplicated disk configuration
Many of the tests use an identical disk configuration. Add a
GuestCommand::default_disks() to generate this configuration and use it
wherever possible.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
9f1ac24bed tests: Make the GuestCommand take a reference to the guest
This will be used fill out default parts of the guest command.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
49e70c6203 tests: Port integration tests over to GuestCommand
Rather than creating the command itself delegate to the GuestCommand.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
67a5882415 tests: Introduce new GuestCommand to handle launching the guest
This is a thin wrapper over std::process:Command which currently only
specifies the default binary but in future will handle more default
behaviour.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-27 17:08:49 +00:00
Rob Bradford
d7b0b9842d tests: Move integration tests to their own directory
Simplify main.rs by moving the integration tests to their own directory.

Signed-off-by: Rob Bradford <robert.bradford@intel.com>
2020-02-25 10:42:54 +00:00