When booting VM on AArch64 machines, we need to construct the
flattened device tree before loading kernel. Hence here we add
the implementation of the flattened device tree for AArch64.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
As on AArch64 systems we need register mpidr to create the
flattened device tree, here in this commit we add ported AArch64
register implementation from Firecracker and related changes to
make this commit build.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit adds ported code of Generic Interrupt Controller (GIC)
software implementation for AArch64, including both GICv2 and
GICv3 devices. These GIC devices are actually emulated by the
host kernel through KVM and will be used in the guest VM as the
interrupt controller for AArch64.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
This commit adds the memory layout design for AArch64 in
`arch/src/aarch64/layout.rs` and related changes in
`arch/src/lib.rs` to make sure this commit can build.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Now the flow of both architectures are aligned to:
1. load kernel
2. create VCPU's
3. configure system
4. start VCPU's
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
This is a preparing commit to build and test CH on AArch64. All building
issues were fixed, but no functionality was introduced.
For X86, the logic of code was not changed at all.
For ARM, the architecture specific part is still empty. And we applied
some tricks to workaround lint warnings. But such code will be replaced
later by other commits with real functionality.
Signed-off-by: Michael Zhao <michael.zhao@arm.com>
Use the ACPI feature to control whether to build the mptable. This is
necessary as the mptable and ACPI RSDP table can easily overwrite each
other leading to it failing to boot.
TEST=Compile with default features and see that --cpus boot=48 now
works, try with --no-default-features --features "pci" and observe the
--cpus boot=48 also continues to work.
Fixes: #1132
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The setup_mptables() call which is not used on ACPI builds has a side
effect of testing whether there was enough RAM which one of the unit
tests was relying on. Add a similar check for the RSDP address.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Fill and write to guest memory the necessary boot module
structure to allow a guest using the PVH boot protocol
to load an initramfs image.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
We need the project to rely on kvm-bindings and kvm-ioctls branches
which include the serde derive to be able to serialize and deserialize
some KVM structures.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Commit 2adddce2 reorganized the crate for a cleaner multi architecture
(x86_64 and aarch64) support.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* load the initramfs File into the guest memory, aligned to page size
* finally setup the initramfs address and its size into the boot params
(in configure_64bit_boot)
Signed-off-by: Damjan Georgievski <gdamjan@gmail.com>
We set it to 0xff, which is for unregistered loaders.
The kernel checks that the bootloader ID is set when e.g. loading
ramdisks, so not setting it when we get a bootparams header from the
loader will prevent the kernel from loading ramdisks.
Fixes: #918
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Validate correct GDT entries, initial segment configuration, and control
register bits that are required by PVH boot protocol.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Expand the unit tests to cover the configure_system() code when
using the PVH boot protocol. Verify the method for adding memory
map table entries in the format specified by PVH boot protocol.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Fill the hvm_start_info and related memory map structures as
specified in the PVH boot protocol. Write the data structures
to guest memory at the GPA that will be stored in %rbx when
the guest starts.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
In order to properly initialize the kvm regs/sregs structs for
the guest, the load_kernel() return type must specify which
boot protocol to use with the entry point address it returns.
Make load_kernel() return an EntryPoint struct containing the
required information. This structure will later be used
in the vCPU configuration methods to setup the appropriate
initial conditions for the guest.
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Create supporting definitions to use the hvm start info and memory
map table entry struct definitions from the linux-loader crate in
order to enable PVH boot protocol support
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Since the kvm crates now depend on vmm-sys-util, the bump must be
atomic.
The kvm-bindings and ioctls 0.2.0 and 0.4.0 crates come with a few API
changes, one of them being the use of a kvm_ioctls specific error type.
Porting our code to that type makes for a fairly large diff stat.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Remove ACPI table creation from arch crate to the vmm crate simplifying
arch::configure_system()
GuestAddress(0) is used to mean no RSDP table rather than adding
complexity with a conditional argument or an Option type as it will
evaluate to a zero value which would be the default anyway.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
Add basic processor details to the DSDT table. The code has to be
slightly convoluted (with the second pass over the cpu_devices vector)
in order to keep the objects alive long enough in order to be able to
take their reference.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
We need to rely on the latest kvm-ioctls version to benefit from the
recent addition of unregister_ioevent(), allowing us to detach a
previously registered eventfd to a PIO or MMIO guest address.
Because of this update, we had to modify the current constraint we had
on the vmm-sys-util crate, using ">= 0.1.1" instead of being strictly
tied to "0.2.0".
Once the dependency conflict resolved, this commit took care of fixing
build issues caused by recent modification of kvm-ioctls relying on
EventFd reference instead of RawFd.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
To avoid a clash with to_bytes() for the unsigned integer types that is
coming in a future release.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
This was verified by comparing the ASL from disassembling the DSDT
before and after. All the individual AML components themselves are also
unit tested.
Fixes: #352
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The virtual IOMMU exposed through virtio-iommu device has a dependency
on ACPI. It needs to expose the device ID of the virtio-iommu device,
and all the other devices attached to this virtual IOMMU. The IDs are
expressed from a PCI bus perspective, based on segment, bus, device and
function.
The guest relies on the topology description provided by the IORT table
to attach devices to the virtio-iommu device.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
