This requires stashing the config values in `struct Vmm`. The configs
should be validated before before creating the VMM thread. Refactor the
code and update documentation where necessary.
The place where the rules are applied remain the same.
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Users can use this parameter to pass extra paths that 'vmm' and its
child threads can use at runtime. Hotplug is the primary usecase for
this parameter.
In order to hotplug devices that use local files: disks, memory zones,
pmem devices etc, users can use this option to pass the path/s that will
be used during hotplug while starting cloud-hypervisor. Doing this will
allow landlock to add required rules to grant access to these paths when
cloud-hypervisor process starts.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Signed-off-by: Wei Liu <liuwe@microsoft.com>
Users can use this cmdline option to enable/disable Landlock based
sandboxing while running cloud-hypervisor.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com>
Enable the use of the vmm crate with the "guest_debug" feature and make
the code that exercises that in the fuzzer unconditional on
"guest_debug" as a feature (as that is not specified as a feature in the
fuzz workspace itself.)
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
When using multiple PCI segments, the 32-bit and 64-bit mmio
aperture is split equally between each segment. Add an option
to configure the 'weight'. For example, a PCI segment with a
`mmio32_aperture_weight` of 2 will be allocated twice as much
32-bit mmio space as a normal PCI segment.
Signed-off-by: Thomas Barrett <tbarrett@crusoeenergy.com>
In accordance with reuse requirements:
- Place each license file in the LICENSES/ directory
- Add missing SPDX-License-Identifier to files.
- Add .reuse/dep5 to bulk-license files
Fixes: #5887
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Currently the only way to set the affinity for virtio block threads is
to boot the VM, search for the tid of each of the virtio block threads,
then set the affinity manually. This commit adds an option to pin virtio
block queues to specific host cpus (similar to pinning vcpus to host
cpus). A queue_affinity option has been added to the disk flag in
the cli to specify a mapping of queue indices to host cpus.
Signed-off-by: acarp <acarp@crusoeenergy.com>
This commit adds the debug-console (or debugcon) device to CHV. It is a
very simple device on I/O port 0xe9 supported by QEMU and BOCHS. It is
meant for printing information as easy as possible, without any
necessary configuration from the guest at all.
It is primarily interesting to OS/kernel and firmware developers as they
can produce output as soon as the guest starts without any configuration
of a serial device or similar. Furthermore, a kernel hacker might use
this device for information of type B whereas information of type A are
printed to the serial device.
This device is not used by default by Linux, Windows, or any other
"real" OS, but only by toy kernels and during firmware development.
In the CLI, it can be configured similar to --console or --serial with
the --debug-console parameter.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
These Default implementations either don't produce valid configs, are
no longer used outside of tests, or both.
For the tests, we can define our own local "default" values that make
the most sense for the tests, without worrying about what's
a (somewhat) sensible "global" default value.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Uses of the old ApiRequest enum conflated two different concerns:
identifying an API request endpoint, and storing data for an API
request. This led to ApiRequest values being passed around with junk
data just to communicate a request type, which forced all API request
body types to implement Default, which in some cases doesn't make any
sense — what's the "default" path for a vhost-user socket? The
nonsensical Default values have led to tests relying on being able to
use nonsensical data, which is an impediment to adding better
validation for these types.
Rather than having API request types be represented by an enum, which
has to carry associated body data everywhere it's used, it makes more
sense to represent API request types as trait objects. These can have
an associated type for the type of the request body, and this makes it
possible to pass API request types and data around as siblings in a
type-safe way without forcing them into a single value even where it
doesn't make sense. Trait objects also give us dynamic dispatch,
which lets us get rid of several large match blocks.
To keep it possible to fuzz the HTTP API, all the Vmm methods called
by the HTTP API are pulled out into a trait, so the fuzzer can provide
its own stub implementation of the VMM.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
This patch adds igvm to the Vm config and params as well as
the command line argument to pass igvm file to load into
guest memory. The file must maintain the IGVM format.
The CLI option is featured guarded by igvm feature gate.
The IGVM(Independent Guest Virtual Machine) file format
is designed to encapsulate all information required to
launch a virtual machine on any given virtualization stack,
with support for different isolation technologies such as
AMD SEV-SNP and Intel TDX.
At a conceptual level, this file format is a set of commands created
by the tool that generated the file, used by the loader to construct
the initial guest state. The file format also contains measurement
information that the underlying platform will use to confirm that
the file was loaded correctly and signed by the appropriate authorities.
The IGVM file is generated by the tool:
https://github.com/microsoft/igvm-tooling
The IGVM file is parsed by the following crates:
https://github.com/microsoft/igvm
Signed-off-by: Muminul Islam <muislam@microsoft.com>
This fixes all typos found by the typos utility with respect to the config file.
Signed-off-by: Philipp Schuster <philipp.schuster@cyberus-technology.de>
With the addition of the spinning waiting for the exit event to be
received in the CMOS device a regression was introduced into the CMOS
fuzzer. Since there is nothing to receive the event in the fuzzer and
there is nothing to update the bit the that the device is looping on;
introducing an infinite loop.
Use an Option<> type so that when running the device in the fuzzer no
Arc<AtomicBool> is provided effectively disabling the spinning logic.
Fixes: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=61165
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
The reset system is asynchronous with an I/O event (PIO or MMIO) for
ACPI/i8042/CMOS triggering a write to the reset_evt event handler. The
VMM thread will pick up this event on the VMM main loop and then trigger
a shutdown in the CpuManager. However since there is some delay between
the CPU threads being marked to be killed (through the
CpuManager::cpus_kill_signalled bool) it is possible for the guest vCPU
that triggered the exit to be re-entered when the vCPU KVM_RUN is called
after the I/O exit is completed.
This is undesirable and in particular the Linux kernel will attempt to
jump to real mode after a CMOS based exit - this is unsupported in
nested KVM on AMD on Azure and will trigger an error in KVM_RUN.
Solve this problem by spinning in the device that has triggered the
reset until the vcpus_kill_signalled boolean has been updated
indicating that the VMM thread has received the event and called
CpuManager::shutdown(). In particular if this bool is set then the vCPU
threads will not re-enter the guest.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Split interrupt source group restore into two steps, first restore
the irqfd for each interrupt source entry, and second restore the
GSI routing of the entire interrupt source group.
This patch will reduce restore latency of interrupt source group,
and in a 200-concurrent restore test, the patch reduced the
average IOAPIC restore time from 15ms to 1ms.
Signed-off-by: Yong He <alexyonghe@tencent.com>
This commit merges crates `qcow`, `vhdx` and `block_util` into the
crate `block`, which can allow `qcow` to use functions from `block_util`
without introducing a circular crate dependency.
This commit is based on crosvm implementation:
f2eecc4152
Signed-off-by: Yu Li <liyu.yukiteru@bytedance.com>
Add new configuration for offloading features, including
Checksum/TSO/UFO, and set these offloading features as
enabled by default.
Fixes: #4792.
Signed-off-by: Yong He <alexyonghe@tencent.com>
To synthesize the interactions between the virtio-net device and the tap
interface, the fuzzer utilizes a pair of unix domain sockets: one socket
(e.g. the dummy tap frontend) is used to construct the 'net_util::Tap'
instance for creating a virtio-net device; the other socket (e.g. the
dummy tap backend) is used in a epoll loop for handling the tx and rx
requests from the virtio-net device.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Following the new design proposal to improve the restore codepath when
migrating a VM, all virtio devices are supplied with an optional state
they can use to restore from. The restore() implementation every device
was providing has been removed in order to prevent from going through
the restoration twice.
Here is the list of devices now following the new restore design:
- Block (virtio-block)
- Net (virtio-net)
- Rng (virtio-rng)
- Fs (vhost-user-fs)
- Blk (vhost-user-block)
- Net (vhost-user-net)
- Pmem (virtio-pmem)
- Vsock (virtio-vsock)
- Mem (virtio-mem)
- Balloon (virtio-balloon)
- Watchdog (virtio-watchdog)
- Vdpa (vDPA)
- Console (virtio-console)
- Iommu (virtio-iommu)
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The kernel will trigger a SIGBUS upon hugetlb page faults when there is
no huge pages available. We neither have a way to ensure enough huge
pages available on the host system, nor have a way to gracefully report
the lack of huge pages in advance from Cloud Hypervisor. For these
reasons, we have to avoid using huge pages from the virtio-mem fuzzer to
avoid SIGBUS errors.
Signed-off-by: Bo Chen <chen.bo@intel.com>
With the guest memory size of 1MB, a valid descriptor size can be close
to the guest memory size (e.g. 1MB) and can contain close to 256k
valid pfn entries (each entry is 4 bytes). Multiplying the queue
size (e.g. 256), there can be close to 64 millions pfn entries to
process in a single request. This is why the oss-fuzz reported a
timeout (with a limit of 60s).
By reducing the guest memory size and the queue size, the worst-case now
is 8 million pfn entries for fuzzing, which can be finished in around 20
seconds according to my local experiment.
Signed-off-by: Bo Chen <chen.bo@intel.com>
As the virt queues are initialized with random bytes from the fuzzing
engine, a descriptor buffer for the available ring can have a very large
length (e.g. up to 4GB). This means there can be up to 1 billion
entries (e.g. page frame number) for virtio-balloon to process a signal
available descriptor (given each entry is 4 bytes). This is the reason
why oss-fuzz reported a hanging issue for this fuzzer, where the
generated descriptor buffer length is 4,278,321,152.
We can avoid this kind of long execution by reducing the size of guest
memory. For example, with 1MB of guest memory, the number of descriptor
entries for processing is limited ~256K.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This function is for really for the transport layer to trigger a device
reset. Instead name it appropriately for the fuzzing specific use case.
Signed-off-by: Rob Bradford <robert.bradford@intel.com>
The fuzzer exercises the inflate, deflate and reporting events of
virtio-balloon via creating three queues and kicking three events.
Signed-off-by: Bo Chen <chen.bo@intel.com>
To make the fuzzer faster and more effective, the guest memory is
setup with a much smaller size (comparing with other virtio device
fuzzers) and a hole between the memory for holding virtio queue and
the rest of guest data. It brings two benefits: 1) avoid writing large
chunk of data from 'urandom' into the available descriptor chain (which
makes the fuzzer faster); 2) reduce substantial amount of overwrites to
the virtio queue data by the data from 'urandom (which makes the fuzzer
more deterministic and hence effective).
Signed-off-by: Bo Chen <chen.bo@intel.com>
The fuzzer is focusing on the virtio-pmem code that processes guest
inputs (e.g. virt queues). Given 'flush' is the only virtio-pmem
request, the fuzzer is essentially testing the code for parsing and
error handling.
Signed-off-by: Bo Chen <chen.bo@intel.com>
To make the fuzzers more focused and more efficient, we now provide
default addresses for the descriptor table, available ring, and used
ring, which ensures the virt-queue has a valid memory layout (e.g. no
overlapping between descriptor tables, available ring, and used ring).
Signed-off-by: Bo Chen <chen.bo@intel.com>
Instead of always fuzzing virt-queues with default values (mostly 0s),
the fuzzer now initializes the virt-queue based on the fuzzed input
bytes, such as the tail position of the available ring, queue size
selected by driver, descriptor table address, available ring address,
used ring address, etc. In this way, the fuzzer can explore the
virtio-block code path with various virt-queue setup.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The current fuzzer defines a 'format' for the random input 'bytes' from
libfuzzer, but this 'format' failed to improve the fuzzing
efficiency. Instead, the 'format' parsing process obfuscates the fuzzer and
makes the fuzzing engine much harder to focus on the actual fuzzing
target (e.g. virtio-block queue event handling). It is actually worse than
simply using the random inputs as the virt queue content for fuzzing.
We can later introduce a different 'format' to the input 'bytes' for
better fuzzing, say focusing more on virito-block fuzzing through
ensuring the virt queue content always has a valid 'available'
descriptor chain to process.
Signed-off-by: Bo Chen <chen.bo@intel.com>
This also ensures that the 'queue_evt' is fully processed, as we enforce
the main thread is waiting for the virtio-block thread to process the
'kill_evt' which is after the 'queue_evt' processing.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Currently the main thread returns immediately after sending a 'queue'
event which is rarely received and processed by the virtio-block
thread (unless system is in high workload). In this way, the fuzzer is
mostly doing nothing and is unable to reproduce its behavior
deterministically (from the same inputs). This patch relies on a
'level-triggered' epoll to ensure a 'queue' event is properly processed
before return from the main thread.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Fuzz the HTTP API handling code with a minimum HTTP API
receiver (e.g. mocking the behavior of our "vmm" thread).
Signed-off-by: Bo Chen <chen.bo@intel.com>
The new virtio-queue version introduced some breaking changes which need
to be addressed so that Cloud Hypervisor can still work with this
version.
The most important change is about removing a handle to the guest memory
from the Queue, meaning the caller has to provide the guest memory
handle for multiple methods from the QueueT trait.
One interesting aspect is that QueueT has been widely extended to
provide every getter and setter we need to access and update the Queue
structure without having direct access to its internal fields.
This patch ports all the virtio and vhost-user devices to this new crate
definition. It also updates both vhost-user-block and vhost-user-net
backends based on the updated vhost-user-backend crate. It also updates
the fuzz directory.
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
