The 'NetConfig' may contain FDs which can't be serialized correctly, as
FDs can only be donated from another process via a Unix domain socket
with `SCM_RIGHTS`. To avoid false use of the serialized FDs, this patch
explicitly set 'NetConfig' FDs as invalid for (de)serialization.
See: #6286
Signed-off-by: Bo Chen <chen.bo@intel.com>
Prefix field with an _ to indicate that this is intentionally unused.
This resolved a nightly compiler check issue due to the unusued field.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
When restoring a VM, the VirtioPciCfgCapInfo struct is not properly
initialized. All fields are 0, including the offset where the
capabibility starts. Hence, when you read a PCI configuration register
in the range [0..length(VirtioPciCfgCap)] you get the value 0 instead of
the actual register contents.
Linux rescans the whole PCI bus when adding a new device. It reads the
values vendor_id and device_id for every device. Because these are
stored at offset 0 in pci configuration space, their value is 0 for
existing devices. As such, Linux considers that the devices have been
unplugged and it removes them from the system.
Fixes: #6265
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Current MSHV emulator only works for x86 instruction decoder. So, let's
restrict its usage to x86.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
According to the virtio iommu spec (section 5.13.6.6), all mappings
within the entire range from virt_start to virt_end in an unmap
request must be removed. This change adds this functionality,
iterating through all mappings that fall within an unmap request
for that domain and removing them.
Signed-off-by: Andrew Carp <acarp@crusoeenergy.com>
Current instruction emulator can only decode x86 instructions. Thus,
restrict the exit handling for just x86 guests.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
APIC controller is only available on x86 machine. ARM uses a different
interrupt controller so those exit messages won't happen for ARM guests.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
MSR and CPUID are limited to x86 architecture so, reduce the visbility
of these two members inside struct MshvVcpu to just x86 architecture.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
error: the item `io` is imported redundantly
Error: --> devices/src/legacy/uart_pl011.rs:468:9
|
467 | use super::*;
| -------- the item `io` is already imported here
468 | use std::io;
| ^^^^^^^
error: the item `Arc` is imported redundantly
Error: --> devices/src/legacy/uart_pl011.rs:469:21
|
467 | use super::*;
| -------- the item `Arc` is already imported here
468 | use std::io;
469 | use std::sync::{Arc, Mutex};
| ^^^
error: could not compile `devices` (lib test) due to 8 previous errors
Error: warning: build failed, waiting for other jobs to finish...
Error: The process 'cross' failed with exit code 101
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
error: the item `read_le_u32` is imported redundantly
Error: --> devices/src/legacy/gpio_pl061.rs:342:17
|
341 | use super::*;
| -------- the item `read_le_u32` is already imported here
342 | use crate::{read_le_u32, write_le_u32};
| ^^^^^^^^^^^
|
= note: `-D unused-imports` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unused_imports)]`
error: the item `write_le_u32` is imported redundantly
Error: --> devices/src/legacy/gpio_pl061.rs:342:30
|
341 | use super::*;
| -------- the item `write_le_u32` is already imported here
342 | use crate::{read_le_u32, write_le_u32};
| ^^^^^^^^^^^^
error: the item `Arc` is imported redundantly
Error: --> devices/src/legacy/gpio_pl061.rs:343:9
|
341 | use super::*;
| -------- the item `Arc` is already imported here
342 | use crate::{read_le_u32, write_le_u32};
343 | use std::sync::Arc;
| ^^^^^^^^^^^^^^
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
clippy was flagging this up as a mixture of mixed attributes but that
attribute is no longer necessary
warning: item has both inner and outer attributes
--> hypervisor/src/arch/x86/emulator/mod.rs:769:1
|
769 | / #[cfg(test)]
770 | | mod tests {
771 | | #![allow(unused_mut)]
| |_________________________^
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#mixed_attributes_style
= note: `#[warn(clippy::mixed_attributes_style)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
error: the item `kvm_bindings` is imported redundantly
Error: --> hypervisor/src/kvm/aarch64/gic/mod.rs:9:18
|
9 | use crate::kvm::{kvm_bindings, KvmVm};
| ^^^^^^^^^^^^ the item `kvm_bindings` is already defined by prelude
|
= note: `-D unused-imports` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(unused_imports)]`
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: assigning the result of `Clone::clone()` may be inefficient
--> vmm/src/device_manager.rs:4188:17
|
4188 | id = child_id.clone();
| ^^^^^^^^^^^^^^^^^^^^^ help: use `clone_from()`: `id.clone_from(child_id)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones
= note: `#[warn(clippy::assigning_clones)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: `devices` (lib) generated 1 warning (run `cargo clippy --fix --lib -p devices` to apply 1 suggestion)
warning: assigning the result of `Clone::clone()` may be inefficient
--> virtio-devices/src/transport/pci_device.rs:1073:9
|
1073 | self.bar_regions = bars.clone();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use `clone_from()`: `self.bar_regions.clone_from(&bars)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
warning: assigning the result of `Clone::clone()` may be inefficient
--> devices/src/pvpanic.rs:213:9
|
213 | self.bar_regions = bars.clone();
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ help: use `clone_from()`: `self.bar_regions.clone_from(&bars)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#assigning_clones
= note: `#[warn(clippy::assigning_clones)]` on by default
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Model Specific Registers (MSRs) are usually available on x86
architecture. So, let's reduce the visibility of MSRs to just x86
architecture.
Signed-off-by: Jinank Jain <jinankjain@microsoft.com>
