libvirt/ChangeLog

2877 lines
105 KiB
Plaintext
Raw Normal View History

2007-03-06 16:51:48 +00:00
Tue Mar 06 11:47:12 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/qemud.c: Unlink read-only socket upon startup (patch
from Rich Jones)
Mon Mar 05 12:19:42 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/qemu_internal.c: Remove bogus ATTRIBUTE_UNUSED annotation
from qemuOpenConnection (from Rich Jones)
2007-03-05 17:15:20 +00:00
Mon Mar 05 12:07:42 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* qemud/qemud.c: Parse QEMU stderr immediately at startup to
identify monitor, and then wait for monitor prompt. Re-arrange
order of file descriptor watches/processing to avoid re-entrancy
problems.
* qemud/driver.c: Make handling of monitor commands slightly
more robust. Added support for 'paused' CPU state in status
* qemud/internal.h, qemud/conf.c: Added support for 'paused'
CPU state
Mon Mar 05 16:39:54 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/qemud.c: don't try and listen to a null socket
path when run as a session daemon. Noticed by Rich Jones
Mon Mar 05 11:33:18 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/driver.c: fix a couple of invalid free() calls
Mon Mar 05 11:07:38 IST 2007 Mark McLoughlin <markmc@redhat.com>
* libvirt.spec.in: BuildRequires: /sbin/iptables and
run configure with the --with-init-script and
--with-qemud-pid-file parameters.
* configure.in: it's --with-qemud-pid-file, not
--with-pid-file
Mon Mar 05 10:52:02 IST 2007 Mark McLoughlin <markmc@redhat.com>
* libvirt.spec.in: sync some of the chanes from dist-cvs
so that this looks pretty much as it should do for the
next release.
2007-03-02 20:19:08 +00:00
Fri Mar 02 15:16:23 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/xend_internal.c: Change lookup by UUID to request a path
of /xen/domain/[uuid] directly for new XenD, rather than iterating
over domains sequentially. Derived from patch by
Tatsuro Enokura <fj7716hz@aa.jp.fujitsu.com>
2007-03-02 14:22:33 +00:00
Fri Mar 02 09:21:23 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/virsh.c: Fix output of VNC display in the case where
there is no explicit listen attribute in the XML
Thu Mar 01 18:22:23 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/xend_internal.c: Instead of looking for string 'Cannot'
in POST response, look for 'xend.err' which is likely to catch
many more error replies from XenD. Signed-off-by: Kazuki Mizushima
Thu Mar 01 16:17:48 IST 2007 Mark McLoughlin <markmc@redhat.com>
* acinclude.m4: add LIBVIRT_COMPILE_WARNINGS, copied from
GNOME but with a few more flags we'd been using.
* configure.in: use that instead of setting CFLAGS
directly.
* proxy/Makefile.am, python/Makefile.am, qemud/Makefile.am,
src/Makefile.am, tests/Makefile.am: use $(WARN_CFLAGS)
Thu Mar 01 16:00:12 IST 2007 Mark McLoughlin <markmc@redhat.com>
Fix from Richard W.M. Jones <rjones@redhat.com>
* proxy/libvirt_proxy.c: include locale.h
Tue Feb 27 10:49:35 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/xend_internal.c: Check POST reply for 'Cannot' to detect
failure of core dump on Domain-0. Signed-off-by: Kazuki Mizushima
Tue Feb 27 10:35:35 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/virsh.c: Fix SEGV when doing tab-completion of commands
which have no arguments (eg, nodeinfo<TAB>).
Tue Feb 27 10:25:35 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/virsh.c: Fix command line argument parsing to make
the '-t' argument work. Signed-off-by: Saori Fukuta
Tue Feb 27 10:20:43 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/xend_internal.c: Only hardcode port = 5900+domid if
running against old XenD < 3.0.3, because in newer XenD
port is guarenteed to be available in XenStore if the VNC
server is running.
Mon Feb 26 15:33:08 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c, qemud/uuid.[ch]: move qemudParseUUID()
into uuid.c
Mon Feb 26 15:31:23 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/uuid.[ch]: add uuid generation code
* qemud/Makefile.am: build it
* qemud/conf.c: generate a UUID if not specified in the XML
Mon Feb 26 15:20:56 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: qemudAutostartConfigs(): print the detailed
error message from a guest/network autostart failure.
Mon Feb 26 14:20:18 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: check for malloc failure in GenerateXML()
and GenerateNetworkXML()
* qemud/driver.c: free the XML output after returning it
from the DumpXML() commands.
Fri Feb 23 12:14:34 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* qemud/driver.c, qemud/internal.h, qemud/qemud.c, qemud/conf.c,
qemud/conf.h: Added code to detect QEMU version number. Adapt
command line construction code to use correct options for VNC
and KQEMU based on version number
Fri Feb 23 10:52:23 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* qemud/Makefile.am: Fix up name of init script in EXTRA_DIST
target.
* libvirt.spec.in: Update path to libvirt_qemud and add the
init script & post/pre scripts to register with chkconfig
Fri Feb 23 14:32:54 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: don't load config files unless they have
a ".xml" suffix, e.g. backup files ... we spew a warning
later if we do.
Fri Feb 23 12:49:11 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/libvirtd.in: add init script for libvirt_qemud
* qemud/Makefile.am: install it unless we were configured
with --with-init-scripts=none
* configure.in: add --with-init-scripts to allow us
have different flavour init scripts
Fri Feb 23 12:46:44 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/qemud.c: add --pid-file and default to writing
out a PID file to /var/run/libvirt_qemud.pid in daemon
mode.
* configure.in: add --with-pid-file arg
Fri Feb 23 12:45:08 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/Makefile.am: install libvirt_qemud in /usr/sbin
instead of /usr/libexec
* src/Makefile.am, src/qemu_internal.c: pass the correct
path to libvirt
Fri Feb 23 10:26:24 IST 2007 Mark McLoughlin <markmc@redhat.com>
* src/virsh.c: in "start" and "net-start" use e.g.
vshCommandOptDomainBy() so that we actually get an
error message if the domain/network isn't found.
Fri Feb 23 09:11:53 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: actually autostart guests/networks at startup
as appropriate.
Fri Feb 23 09:08:02 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/internal.h: put the config directory paths in
an array in order to make them easier to initialize,
but still expose pointers to each of them as members
in the server struct.
* qemud/qemud.c: cleanup the config directory path
initialization.
Fri Feb 23 09:03:19 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/driver.c: maintain the autostart flag on disk
using symlinks from the "autostart" directories to
the corresponding config files.
* qemud/internal.h: add paths to the autostart links
to the vm/network structures and paths to the autostart
dirs to the server struct.
* qemud/qemud.c: initialize the server autostart dir
patches.
* qemud/conf.h: expose qemudEnsureDir()
* qemud/conf.c: check the autostart symlinks when
loading config files at startup.
Fri Feb 23 09:00:13 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/protocol.h: add the (domain/network)(Get/Set)Autostart
requests and replies to the protocol.
* src/qemu_internal.c: hookup the qemu driver autostart
methods
* qemud/dispatch.c, qemud/driver.[ch], internal.h: add
the daemon side, but just set an in-memory autostart
flag for now.
Fri Feb 23 08:51:05 IST 2007 Mark McLoughlin <markmc@redhat.com>
* src/virsh.c: add "autostart" and "net-autostart" commands
and cleanup the "list" and "net-list" commands a bit.
Fri Feb 23 08:49:12 IST 2007 Mark McLoughlin <markmc@redhat.com>
* include/libvirt/libvirt.h.in, src/libvirt.c add
virDomainGetAutostart(), virDomainSetAutostart(),
virNetworkGetAutostart() and virNetworkSetAutostart().
* src/libvirt_sym.version: export the API
* src/driver.h: add methods to the driver vtables.
* src/proxy_internal.c, src/qemu_internal.c,
src/test.c, src/xen_internal.c, src/xend_internal.c,
src/xm_internal.c, src/xs_internal.c: set those
methods to NULL
Fri Feb 23 08:41:34 IST 2007 MarkMcLoughlin <markmc@redhat.com>
* qemud/conf.[ch]: significantly re-factor qemudLoadConfigXML()
so that "parse the XML", "assign the def to a VM" and
"save the XML" operations are in separate functions.
Add qemudRemoveInactiveVM() and qemudRemoveInactiveNetwork().
Report errors when loading config files at startup. Check
that a domain/network's name matches the config filename.
* qemud/driver.c: update the Create() and Define() functions
to explicitly parse/assign/save. Also, fix bug where if
Create() failed, we would free the VM without removing it
from the inactive list.
* qemud/qemud.c: use qemudRemoveInactiveVM/Network()
Fri Feb 23 08:40:52 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/driver.[ch], qemud/dispatch.c: fix the fact that
qemudDispatchDomainStart() doesn't report an error if the uuid
lookup fails and also move the uuid lookup into the driver
so that it matches the way we do Destroy().
Fri Feb 23 08:37:23 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c, qemud/driver.c, qemud/internal.h,
qemud/qemud.c: Merge the ->activevms and ->inactivevms
into a single ->vms list in order to make things
easier to manage. Likewise for networks. Also add
qemudIsActiveVM() and qemudIsActiveNetwork() inline
functions.
Thu Feb 22 14:06:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/xm_internal.c, src/xend_internal.c: Re-arrange VM creation
commands to ensure we destroy stillborn domains if device hotplug
fails to complete. Fix deletion of inactive VMs from internal
cache of domain configs.
2007-02-22 16:49:12 +00:00
Thu Feb 22 11:45:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/xs_internal.c: Refuse to do shutdown / reboot on
Dom0 guest. Signed-off-by: Kazuki Mizushima
<mizushima.kazuk@jp.fujitsu.com>
Thu Feb 22 10:37:08 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: fix another xml property leak.
Tue Feb 20 19:08:58 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: use strerror(errno) in some error messages
to make them a bit more useful
Tue Feb 20 19:07:12 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: don't free active networks/vms if we
fail to save the new config
Tue Feb 20 18:25:42 IST 2007 Mark McLoughlin <markmc@redhat.com>
* virsh.c: cmdNetworkList() re-indent this.
Tue Feb 20 17:49:22 IST 2007 Mark McLoughlin <markmc@redhat.com>
Fix a few leaks
* qemud/qemud.c: qemudCleanup(): free the socket
structures
* qemud/conf.c: fix various leaks in the xml parsing
* qemud/iptables.c: fix a typo causing a leak
Tue Feb 20 16:49:53 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c, qemud/qemud.c: only create config dirs
when actually trying to write out config.
Tue Feb 20 09:56:35 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/bridge.c: change the fix for the alignment warning
a little.
Tue Feb 20 09:03:05 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/qemud.c: clean up qemudInitialize() and qemudListen()
so as to coalesce the two "system vs. user" code paths and
fix up some problems noticed by dan.
Mon Feb 19 16:59:18 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/qemud.c: don't shutdown guest and networks on
SIGHUP
Mon Feb 19 16:58:53 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/qemud.c: handle SIGQUIT.
Mon Feb 19 09:38:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* qemud/bridge.c, qemud/conf.c: Fixed int -> char casts to deal
with endianness / alignment issues on IA64 platforms. Patch
from Atsushi SAKAI <sakaia@jp.fujitsu.com>
Fri Feb 16 18:28:32 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/qemud.c, qemud/dispatch.c, qemud/internal.h
qemud/conf.c, qemud/driver.c, configure.in: add a
qemudLog() function which uses syslog() if we're in daemon
mode, doesn't output INFO/DEBUG messages unless the
verbose flag is set and doesn't output DEBUG messages
unless compiled with --enable-debug. Also, make a first
pass through fatal errors and add error messages for them.
Fri Feb 16 18:26:55 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/internal.h, qemud/qemud.c: improve signal handling
and handle SIGHUP by shutting down all guests and networks
and re-loading configs, and handle SIGINT and SIGTERM
by shutting down cleanly.
Fri Feb 16 18:24:08 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/qemud.c, qemud/bridge.c, qemud/iptables.c: fix
our FD_CLOEXEC usage so that all fds which should be
closed on exec are marked as such and that we leave
exec() to do the actual closing.
Fri Feb 16 18:23:15 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/qemud.c: fix qemudEnableIpForwarding() to not leak
an fd if writing to /proc/sys/net/ipv4/ip_forward fails.
2007-02-16 16:56:47 +00:00
Fri Feb 16 11:56:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* tests/Makefile.am: Fixed linkage of test suites
2007-02-16 16:04:54 +00:00
Fri Feb 16 11:03:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/driver.h, src/proxy_internal.c, src/qemu_internal.c,
src/test.c, src/xen_internal.c, src/xend_internal.c,
src/xm_internal.c, src/xs_internal.c: Remove the unused
'init' method from the internal driver API (from Rich Jones)
2007-02-16 15:44:08 +00:00
Fri Feb 16 10:36:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* qemud/internal.h, qemud/qemud.c, libvirt.spec.in: Remove
mistaken references to gnutls.
Thu Feb 15 19:07:24 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: fix <interface type='network'> output
Thu Feb 15 19:06:56 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: fix the <graphics> output - we weren't
handling sdl
Thu Feb 15 19:06:22 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: fix a couple of typos
Thu Feb 15 19:05:48 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: fix segfault
Thu Feb 15 19:04:10 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.h: move qemudFreeVMDef() down a bit
Thu Feb 15 16:00:05 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/bridge.c: don't output bridge parameters if they
are the default.
Thu Feb 15 15:56:32 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.[ch], qemud/dispatch.c, qemud/internal.h,
qemud/qemud.c, qemud/driver.c: allow re-defining network
configs; basically copying dan's patch for domains.
Thu Feb 15 15:47:46 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: fix a couple of qemud_vm_def leaks
* driver.c: simplify qemudDomainDefine()
Wed Feb 14 17:01:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* qemud/qemud.c: Ensure we create the main libvirt config
directory at startup
Wed Feb 14 16:47:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* qemud/conf.c: Fixed generation of <features> block, and
don't include ID, or VNC port in inactive XML generation
2007-02-14 21:46:06 +00:00
Wed Feb 14 16:45:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/qemu_internal.c: Fixed path to the libvirt_qemud
daemon for auto-start
Wed Feb 14 19:53:33 CET 2007 Daniel Veillard <veillard@redhat.com>
* libvirt.spec.in: spec cleanup and missing BuildRequires
* qemud/Makefile.am: avoid -Werror
Wed Feb 14 19:06:26 CET 2007 Daniel Veillard <veillard@redhat.com>
* configure.in NEWS include/libvirt/libvirt.h docs/* docs/apibuild.py:
prepare release of 0.2.0, update doc, avoid console module for API.
* po/*: regenerated
2007-02-14 21:46:06 +00:00
Wed Feb 14 12:35:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* libvirt.spec.in: Added dep on libsysfs-devel. Pre-create
the qemu config dir & socket dir.
2007-02-14 21:46:06 +00:00
Wed Feb 14 12:19:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
2007-02-14 17:35:38 +00:00
* src/qemu_internal.c, qemud/qemud.c: Move configs into
/etc/libvirt/qemu or $HOME/.libvirt/qemu and the socket into
$HOME/.libvirt/qemud-sock or /var/run/libvirt/qemud-sock
2007-02-14 21:46:06 +00:00
Wed Feb 14 12:19:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
2007-02-14 17:20:27 +00:00
* python/generator.py: blacklist vshRunConsole method from
the python bindings
2007-02-14 21:46:06 +00:00
Wed Feb 14 12:17:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
2007-02-14 17:19:18 +00:00
* po/libvirt.pot, po/*.po: Updated the i18n strings wrt to
the recent code changes
2007-02-14 21:46:06 +00:00
Wed Feb 14 11:58:24 EST 2007 Daniel P. Berrange <berrange@redhat.com>
* src/qemud.c, src/conf.c, src/internal.c, src/driver.c: Change
the handling of the internal VM config to allow replacing of the
config for a VM which is running.
2007-02-14 21:46:06 +00:00
Wed Feb 14 16:53:25 IST 2007 Mark McLoughlin <markmc@redhat.com>
Fix from Richard W.M. Jones <rjones@redhat.com>
* virsh.c: add a colon after the connect arg to
getopt_long()
2007-02-14 21:46:06 +00:00
Wed Feb 14 16:48:24 IST 2007 Mark McLoughlin <markmc@redhat.com>
* src/qemu_internal.c: correctly register the network
driver
2007-02-14 21:46:06 +00:00
Wed Feb 14 16:35:56 IST 2007 Mark McLoughlin <markmc@redhat.com>
* autogen.sh: run autoheader before automake
2007-02-14 21:46:06 +00:00
Wed Feb 14 16:23:25 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/iptables.[ch]: add code for managing iptables
rules.
* qemud/Makefile.am: add iptables.[ch].
* qemud/qemud.c: add and remove iptables rules as
appropriate.
* qemud/conf.c: when starting a guess, add a rule
allowing it to forward packets across the networks
bridge.
* qemud/internal.h: add iptables context ptr
* configure.in: add --with-iptables-dir and
--with-iptables-prefix to allow us to put our rules
in a chain with the given prefix and save the rules
in files in the given dir so as to integrate with
the proposed "service iptables restart" solution
in:
https://bugzilla.redhat.com/227011
2007-02-14 21:46:06 +00:00
Wed Feb 14 16:21:18 IST 2007 Mark McLoughlin <markmc@redhat.com>
* src/xml.c: with <interface type="network"> connect the
Xen guest to the appropriate bridge.
2007-02-14 21:46:06 +00:00
Wed Feb 14 16:17:51 IST 2007 Mark McLoughlin <markmc@redhat.com>
* include/libvirt/libvirt.h.in, src/libvirt.c: add
virNetworkGetBridgeName() to allow finding out what
bridge to connect to in order to join a network.
* src/driver.h: add networkGetBridgeName() to vtable.
* qemud/protocol.h: add the request and reply to
the qemud protocol.
* qemud/dispatch.c, qemud/driver.[ch]: handle them
here.
* src/qemu_internal.c: implement GetBridgeName()
in the qemu driver.
* src/libvirt_sym.version: add new symbol.
2007-02-14 21:46:06 +00:00
Wed Feb 14 16:14:32 IST 2007 Mark McLoughlin <markmc@redhat.com>
* src/xend_internal.c, src/xm_internal.c: pass the
connection to virDomainParseXMLDesc()
* src/xml.[ch]: make virDomainParseXMLDesc accept
a virConnectPtr so that we can use it later to
lookup the bridge associated with a network
* tests/xml2sexprtest.c: just pass NULL here, it's
safe
2007-02-14 21:46:06 +00:00
Wed Feb 14 16:08:55 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: add support for connecting a qemu
guest to a bridge using a tap device in order to
connect it to a virtual network.
* qemud/internal.h: add <interface type="network">
config and track tapfds so as to not close them
on exec.
* qemud/qemud.c: don't close tapfds on exec and
disconnect the iface when the guest shuts down.
2007-02-14 21:46:06 +00:00
Wed Feb 14 16:04:48 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c, qemud/internal.h: add dhcp config
* qemud/qemud.c: start dnsmasq to provide dns/dhcp
for virtual networks.
2007-02-14 21:46:06 +00:00
Wed Feb 14 16:02:23 IST 2007 Mark McLoughlin <markmc@redhat.com>
* configure.in: add --disable-bridge-params, check
for libsysfs and various kernel headers
* bridge.[ch]: add code for managing bridges
* qemud/Makefile.am: add bridge.[ch] and link against
libsysfs if enabled.
* qemud/conf.c: add support for bridge config.
* qemud/internal.h: add various bridging bits
* qemud/qemud.c: implement qemudStartNetworkDaemon()
and qemudShutdownNetworkDaemon().
2007-02-14 21:46:06 +00:00
Wed Feb 14 15:55:02 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.[ch]: implement parsing and saving network
configs.
* qemud/driver.c: flesh out the stubs
* qemud/internal.h: add networks list etc. to
struct qemud_server
* qemud/qemud.c: add qemudStartNetworkDaemon() and
qemudShutdownNetworkDaemon() stubs.
2007-02-14 21:46:06 +00:00
Wed Feb 14 15:52:34 EST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/protocol.h: add the protocol for virtual networks
* qemud/dispatch.c: implement the protocol
* qemud/driver.[ch]: add stubs for the driver
* qemud/internal.h: add struct qemud_network
* src/qemu_internal.c: add a virtual networks driver
2007-02-14 21:46:06 +00:00
Wed Feb 14 15:43:28 IST 2007 Mark McLoughlin <markmc@redhat.com>
* src/virsh.c: add the net-* commands.
2007-02-14 21:46:06 +00:00
Wed Feb 14 15:37:17 IST 2007 Mark McLoughlin <markmc@redhat.com>
Note: potential ABI break here, but people should
only really be using virError structs returned from
libvirt itself.
* include/libvirt/virterror.h: add virNetwork
to virError
* src/internal.h, src/virterror.c: add network param
to __virRaiseError()
* src/conf.c, src/hash.c, src/libvirt.c, src/proxy_internal.c,
src/qemu_internal.c, src/sexpr.c, src/test.c, src/xen_internal.c,
src/xend_internal.c, src/xm_internal.c, src/xml.c, src/xmlrpc.c,
src/xs_internal.c: update.
2007-02-14 21:46:06 +00:00
Wed Feb 14 15:33:05 IST 2007 Mark McLoughlin <markmc@redhat.com>
* include/libvirt/libvirt.h.in: add the networks APIs
* include/libvirt/virterror.h: add some error codes
* src/driver.h: add network driver vtable
* src/hash.c: add networks hash
* src/internal.h: add virNetwork
* src/libvirt.c: hook up the APIs to the network
driver
* src/libvirt_sym.version: add the new APIs
* src/virterror.c: handle the new error codes
2007-02-14 21:46:06 +00:00
Wed Feb 14 15:07:26 IST 2007 Mark McLoughlin <markmc@redhat.com>
* src/conf.h: fix merge error - remove the argc argument
from qemudBuildCommandLine()
2007-02-14 21:46:06 +00:00
Wed Feb 14 15:03:22 IST 2007 Mark McLoughlin <markmc@redhat.com>
* src/virsh.c: Re-name some of the VSH_DOMBYFOO stuff
to VSH_BYFOO in order to re-use it for the network stuff.
2007-02-14 21:46:06 +00:00
Wed Feb 14 14:58:35 IST 2007 Mark McLoughlin <markmc@redhat.com>
* src/hash.c, src/internal.h: Re-name virConnect->domains_mux
to virConnect->hashes_mux since it will also be used to
protect the networks hash.
2007-02-14 21:46:06 +00:00
Wed Feb 14 14:57:52 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: qemudSaveConfig() will always report a
more specific error, so we should avoid overwriting
this error.
2007-02-14 21:46:06 +00:00
Wed Feb 14 14:54:25 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/qemud.c: Re-factor out qemudExec() so that it can
be used to launch dnsmasq.
* qemud/conf.c: don't return argc from qemudBuildCommandLine()
as exec() doesn't need it.
2007-02-14 21:46:06 +00:00
Wed Feb 14 14:52:12 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: Re-factor bits of conf.c so that:
- qemudMakeConfigPath() can be re-used given another configDir
- split qemudEnsureConfigDir() out of qemudSaveConfig() so
that it may be re-used to create another configDir
- split qemudScanConfigDir() out so that qemudScanConfigs()
can scan multiple configDirs
2007-02-14 21:46:06 +00:00
Wed Feb 14 14:50:22 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c: handle an unspecified MAC address,
fix the argv freeing code in qemudBuildCommandLine()
and fix copy and paste error in qemudGenerateXML()
2007-02-14 21:46:06 +00:00
Wed Feb 14 14:42:38 IST 2007 Mark McLoughlin <markmc@redhat.com>
* src/internal.h: add virConnect->qemud_fd so that
xen and qemu don't share the handle member.
* src/hash.c, src/qemu_internal.c: update
2007-02-14 21:46:06 +00:00
Wed Feb 14 14:40:52 IST 2007 Mark McLoughlin <markmc@redhat.com>
* qemud/conf.c, qemud/dispatch.c, qemud/driver.c,
qemud/qemud.c: include autoconf's config.h
2007-02-14 21:46:06 +00:00
Wed Feb 14 14:39:18 IST 2007 Mark McLoughlin <markmc@redhat.com>
* conf.[ch]: rename from config.[ch] so we can use
autoconf's config.h
* Makefile.am: update
* driver.c, qemud.c: upd.
2007-02-14 21:46:06 +00:00
Wed Feb 14 14:33:22 IST 2007 Mark McLoughlin <markmc@redhat.com>
* autogen.sh: run autoheader
* config.h.in: remove
Tue Feb 13 19:46:35 EST 2007 Daniel Berrange <berrange@redhat.com>
* autobuild.sh: Run coverage tests during automated build
* autogen.sh: Point aclocal at m4 directory explicitly
* configure.in: Added command line arg to enable coverage
* Makefile.am: Added scripts directory
* src/Makefile.am: Build with coverage testing if requested
and add target for extracting coverage data
* scripts/*: Helper tools for coverage testing
* tests/Makefile.am: Make tests link to object files instad
of the static library to ensure single output dest for
coverage data when running tests
2007-02-14 01:40:09 +00:00
Tue Feb 13 19:29:35 EST 2007 Daniel Berrange <berrange@redhat.com>
* src/qemu_internal.h, src/qemu_internal.c, src/Makefile.am,
src/driver.h, src/libvirt.c: Added a new driver to talk to
the QEMU daemon
* src/virterror.c, include/libvirt/virterror.c: Added new
error domain for QEMU.
* qemud/*: Added a daemon service for managing QEMU machines
via the libvirt qemu_internal driver
* src/virsh.c: use a read-write connection by default for QEMU
urls.
* configure.in, Makefile.am: Added qemud subdirectory.
2007-02-08 19:10:25 +00:00
Thu Feb 8 12:59:14 EST 2007 Daniel Berrange <berrange@redhat.com>
* src/xml.c, src/xend_internal.c, src/xend_internal.h: Remove
obsolete / unused code.
2007-02-07 17:46:44 +00:00
Wed Feb 7 11:30:14 EST 2007 Daniel Berrange <berrange@redhat.com>
* autobuild.sh, src/Makefile.am: Added a control file for
automating build and test processes
2007-02-07 13:44:22 +00:00
Wed Feb 7 07:43:21 EST 2007 Daniel Berrange <berrange@redhat.com>
* src/xml.c, tests/xml2sexprdata/*.sexpr: Also include the
vcpu info in the (image (hvm)) part of the SEXPR for fully
virt guests, so it gets passed on into QEMU.
2007-02-07 13:41:44 +00:00
Wed Feb 7 07:40:21 EST 2007 Daniel Berrange <berrange@redhat.com>
* configure.in, tests/Makefile.am: Only enable the low level
Xen tests if XenD is actually running & accessible via the
UNIX socket
2007-01-28 19:47:36 +00:00
Sun Jan 28 14:44:23 EST 2007 Daniel Berrange <berrange@redhat.com>
* sc/console.c, src/console.h, src/virsh.c: Rename the
virRunConsole method to vshRunConsole to avoid it getting
picked up in auto-generated python bindings
2007-01-26 13:10:28 +00:00
Fri Jan 26 07:59:52 EST 2007 Daniel Berrange <berrange@redhat.com>
* src/virshtest.c: Fixed up for new way test driver enumerates
domains
Fri Jan 26 06:53:52 EST 2007 Daniel Berrange <berrange@redhat.com>
* src/virshc: Added 'console' and 'vncdisplay' commands to
the virsh tool
* src/console.c, src/console.h: Impl of a simple interactive
serial console
Fri Jan 26 12:48:13 CET 2007 Daniel Veillard <veillard@redhat.com>
* src/virsh.c: Richard W.M. Jones pointed out a missing option
in getopt_long()
Fri Jan 26 12:09:49 CET 2007 Daniel Veillard <veillard@redhat.com>
* autogen.sh: applied patch from Richard W.M. Jones to not
output instructions if configure failed
Mon Jan 23 14:36:18 IST 2007 Mark McLoughlin <markmc@redhat.com>
* include/libvirt/libvirt.h.in: add VIR_UUID_BUFLEN and
VIR_UUID_STRING_BUFLEN
* libvirt/proxy/libvirt_proxy.c, libvirt/src/hash.c,
libvirt/src/internal.h, libvirt/src/libvirt.c,
libvirt/src/proxy_internal.c, libvirt/src/test.c,
libvirt/src/virsh.c, libvirt/src/xend_internal.c,
libvirt/src/xm_internal.c, libvirt/src/xml.c,
libvirt/python/libvir.c: use them
2007-02-07 13:41:44 +00:00
Mon Jan 23 12:28:42 IST 2007 Mark McLoughlin <markmc@redhat.com>
Issues pointed out by Karel Zak <kzak@redhat.com>
* src/virsh.c: fix up some syntax strings, use BUFSIZ
and free names returned from virConnectListDefinedDomains()
2007-01-22 20:43:02 +00:00
Mon Jan 22 15:41:52 EST 2007 Daniel Berrange <berrange@redhat.com>
* src/virsh.c: Fix crash in 'connect' command by ensuring
we always strdup the connection URI string.
Mon Jan 22 16:23:52 IST 2007 Mark McLoughlin <markmc@redhat.com>
* src/internal.h: virDomain.handle refers to the "id"
in the API, so re-name to virDomain.id to avoid
confusion.
2007-01-22 20:43:02 +00:00
* src/hash.c, src/libvirt.c, src/proxy_internal.c, src/test.c,
src/xen_internal.c, src/xend_internal.c, src/xm_internal.c,
src/xml.c, src/xs_internal.c: update for rename.
Mon Jan 22 16:17:25 IST 2007 Mark McLoughlin <markmc@redhat.com>
* src/driver.h: remove Free(), GetName(), GetID() and
GetUUID() driver methods.
* src/proxy_internal.c, src/test.c, src/xen_internal.c,
src/xend_internal.c, src/xm_internal.c, src/xs_internal.c:
Update driver vtables.
Mon Jan 22 16:24:54 CET 2007 Daniel Veillard <veillard@redhat.com>
* configure.in libvirt.spec.in docs/*.html include/libvirt/libvirt.h:
preparing release of 0.1.11
* docs/Makefile.am libvirt.spec.in: package libvirt.rng in
* po/*: translation update
Fri Jan 19 15:28:13 EST 2007 Daniel Berrange <berrange@redhat.com>
* tests/xmconfigtest.c: Test suite to check conversion from
XML to XM config files, and the reverse
* tests/xmconfigdata/*.xml: Source XML files for the test
suite
* tests/xmconfigdata/*.cfg: Source XM config files for the
test suite
* configure.ac, tests/Makefile.am: Added xmconfigdata subdir
* tests/xmconfigdata/Makefile.am: Include config files when
doing a make dist.
Fri Jan 19 15:23:13 EST 2007 Daniel Berrange <berrange@redhat.com>
* src/xm_internal.c: Finished off the conversion from XML
to XM config files, and the reverse, to deal with all known
libvirt guest config options.
Fri Jan 19 15:07:13 EST 2007 Daniel Berrange <berrange@redhat.com>
* src/conf.c: Free stored config parameters, when free'ing
the virConfPtr object. For values, only free the object
corresponding to the values' type
2007-01-18 21:13:14 +00:00
Thu Jan 18 16:12:13 EST 2007 Daniel Berrange <berrange@redhat.com>
* docs/testnode.xml, docs/testdomfc4.xml: Tweak memory settings to
be more realistic for testing purposes
Thu Jan 18 16:05:13 EST 2007 Daniel Berrange <berrange@redhat.com>
* src/test.h, src/test.c: Implement full inactive domain management
support in mock hypervisor to allow testing of apps wanting inactive
domains.
Thu Jan 18 13:37:02 EST 2007 Daniel Berrange <berrange@redhat.com>
* src/xend_internal.c: Tweak some of the new inactive domain methods
to only run when XenD is >= 3.0.4, so it falls back correctly to
the src/xm_internal.c driver.
Wed Jan 10 16:20:02 CET 2007 Daniel Veillard <veillard@redhat.com>
* docs/libvirt.rng: udated for the upcoming KVM and QEmu support
Wed Jan 10 11:06:36 CET 2007 Daniel Veillard <veillard@redhat.com>
* docs/libvirt.rng: went through the existing tests with the RNG and
fixed or added a number constructs
Tue Jan 9 17:28:18 CET 2007 Daniel Veillard <veillard@redhat.com>
* docs/libvirt.rng: first version of the Relax-NG schemas to validate
XML instances
Wed Dec 20 15:56:38 CET 2006 Daniel Veillard <veillard@redhat.com>
* po/*: updated localization files
* configure.in NEWS libvirt.spec.in docs/libvir.html docs/news.html
include/libvirt/libvirt.h: preparing release of 0.1.10
Tue Dec 19 12:26:53 EST 2006 Daniel P. Berrange <berrange@redhat.com>
* src/xm_internal.c: Maintain hash of config filenames, separate from
hash mapping domain names to config files. This deals with case of two
config files specifying same named guest, which although not recommended
seems to be encountered 'in the wild'.
Mon Dec 18 23:11:53 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/xend_internal.c: Dan Berrange pointed out a ref count bug
rhbz#143946 , patch applied
Thu Dec 14 10:58:00 CET 2006 Daniel Veillard <veillard@redhat.com>
* po/*.po po/libvirt.pot: merged new ms transations, updated
with the current source.
Wed Dec 13 17:24:03 EST 2006 Daniel Berrange <berrange@redhat.com>
* src/xend_internal.c: Implement the ListDefinedDomains,
NumOfDefinedDomains, DomainCreate ,DomainDefineXML, DomainUndefine
APIs to manage inactive domains when running with Xen 3.0.4. Make
GetMaxMemory, SetMaxMemory, SetMemory, GetInfo, SetVCPUs & DumpXML
work with inactive domains. Cache xendConfigVersion when first
connecting to Xend.
* src/xend_internal.h: Prototypes for new APIs
* src/xm_internal.c: Updated for new way of getting xendConfigVersion
data
* src/internal.h: Added xendConfigVersion field for virConnect struct
Tue Dec 12 09:05:03 EST 2006 Daniel Berrange <berrange@redhat.com>
* src/xend_internal.c: Added support for vnclisten parameter
in generated XML
* src/xml.c: Support new style paravirt framebuffer graphics
configuration from xen 3.0.4 tree. Also add support for setting
vncpasswd & vnclisten address SEXPR values, based on passwd
and listen XML attributes.
* tests/sexpr2xmltest.c: Whitespace cleanup.
* tests/xml2sexprtest.c: Added test cases for new style paravirt
framebuffer graphics configuration
* tests/xml2sexprdata/xml2sexpr-pv-vfb*: Data files for new
tests for graphics
* tests/sexpr2xmldata/sexpr2xml-pv-vfb-*.xml: Added listen address
attribute
Thu Dec 7 12:28:03 EST 2006 Daniel Berrange <berrange@redhat.com>
* src/xend_internal.c: Add bounds checking in xenDaemonListDomains to
avoid overflowing the 'ids' array.
Wed Dec 6 17:46:03 EST 2006 Daniel Berrange <berrange@redhat.com>
* src/xend_internal.c: Support parsing of new paravirt framebuffer
graphics configuration from xen 3.0.4 tree.
* test/sexpr2xmltest.c: Added test cases for new & old framebuffer
config parsing in paravirt & fullyvirt.
* test/sexpr2xmldata/sexpr2xml-pv-vfb-*: New test data files
Wed Dec 6 17:40:03 EST 2006 Daniel Berrange <berrange@redhat.com>
* test/xml2sexprdata/xml2sexpr-curmem.xml, test/xml2sexprdata/xml2sexpr-curmem.sexpr:
Fix test case to reflect recent change to bootloader/image handling
Wed Dec 6 15:06:28 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/xen_internal.c: the structure passed to the vcpuinfo hypercall
had changed between version 1 and version 2 too, the leading domain
field disapeared since it goes in the including op. Fixes redhat
bugs #217370 and #217743
Mon Dec 4 17:47:03 CET 2006 Daniel Veillard <veillard@redhat.com>
* po/ca.po po/fr.po po/hi.po: merging more localizations coming
from Red Hat
Wed Nov 29 13:13:39 CET 2006 Daniel Veillard <veillard@redhat.com>
* NEWS configure.in libvirt.spec.in docs/libvir.html docs/news.html
include/libvirt/libvirt.h: preparing libvirt-0.1.9 release
* po/*.po: more updates and fix all the .po to not barf when msgfmt
tries to process them
Tue Nov 28 13:15:00 CET 2006 Daniel Veillard <veillard@redhat.com>
* configure.in: update for ALL_LINGUAS
* po/*.po: updated with strings from Red Hat translators
Mon Nov 27 23:27:26 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/xml.c: patch for rhbz#214741, when using pygrub
do not push the os image information for domain creation
via xend
Wed Nov 22 17:57:58 CET 2006 Daniel Veillard <veillard@redhat.com>
* docs//*: regenerated
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in src/driver.h
src/libvirt.c src/proxy_internal.c src/test.c src/virsh.c
src/xen_internal.c src/xend_internal.c src/xm_internal.c
src/xs_internal.c: added support for dumping core of domains
assuming a xend with the latest patch to do so.
Tue Nov 21 18:05:33 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/xs_internal.c: Michel Ponceau pointed out a bug in
xenStoreDomainGetNetworkID refactoring
Mon Nov 20 16:51:43 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/xml.c src/xs_internal.c src/xs_internal.h: cleanup for the
dynamic device code to isolate as a separate function
xenStoreDomainGetNetworkID() the access to the XenStore
Thu Nov 16 19:36:12 EST 2006 Daniel Berrange <berrange@redhat.com>
* src/xm_internal.c: Add support for device_model parameter to
make HVM guests work. Also support serial console in HVM, since
it needs to be explicitly turned on, unlike PV.
Thu Nov 16 18:16:42 EST 2006 Daniel Berrange <berrange@redhat.com>
* src/xml.c: Mark 'msg' parameter in XML error handler as unused.
Fix device id lookup code to use unsigned integers avoid type
mis-matches.
2006-11-16 19:06:13 +00:00
Thu Nov 16 13:09:42 EST 2006 Daniel Berrange <berrange@redhat.com>
* src/Makefile.am: Added new xm_internal.c source file
* src/libvirt.c: Call the xenXMRegister() method to activate
the XM backend
* src/driver.h: Added a unique id for XM driver backend
* src/internal.h: Increase number of drivers allowed
* src/xm_internal.h, src/xm_internal.c: New driver for
managing inactive domains from /etc/xen config files
Thu Nov 16 18:18:12 CET 2006 Daniel Veillard <veillard@redhat.com>
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/driver.h src/libvirt.c src/libvirt_sym.version
src/proxy_internal.c src/test.c src/xen_internal.c
src/xend_internal.c src/xml.c src/xml.h src/xs_internal.c:
intagrated patch from Michel Ponceau to add hot-plug devices
support to the API, integrated in driver API and fixed
a few small things. Still a TODO in src/xml.c about
moving xenstore direct accesses to a new routine.
Wed Nov 15 18:23:13 EST 2006 Daniel Berrange <berrange@redhat.com>
* python/generator.py, python/libvir.c, python/libvirt-python-api.xml:
Added binding for virConnectListDefinedDomains API.
Wed Nov 15 15:08:13 EST 2006 Daniel Berrange <berrange@redhat.com>
* src/xen_internal.c, src/xs_internal.c, src/xend_internal.c,
src/proxy.c: Don't try to invoke APIs if domain is is < 0, letting
these inactive domains be handled by other driver backend.
* src/xend_internal.h: make xend_config_version() api available
to other drivers
Wed Nov 15 14:59:13 EST 2006 Daniel Berrange <berrange@redhat.com>
* src/hash.c, src/hash.h: Added three new methods for iterating
over hashtable entries, virHashForEach, virHashRemoveSet &
virHashSearch.
Wed Nov 15 14:52:01 EST 2006 Daniel Berrange <berrange@redhat.com>
* src/conf.c, src/conf.h: Add two new APIs virConfNew() and
virConfSetValue() for creating & populating new config objects
in memory instead of from a file
Wed Nov 15 14:42:01 EST 2006 Daniel Berrange <berrange@redhat.com>
* python/libvir.c, python/libvirt_wrap.h, python/types.h: Ensure
that unsigned longs are marshalled to python Long type instead
of Int, to avoid 32-bit integer wraparound
Tue Nov 14 18:42:01 EST 2006 Daniel Berrange <berrange@redhat.com>
* src/xend_internal.c: Added support for parsing non-bridge style
networking configs for guests.
* src/xml.c: Ensure the <ip address> element gets serialized to
the SEXPR for non-bridged networks.
* tests/xml2sexprtest.c, tests/sexpr2xmltest.c: Added new tests
covering different networking configs
* tests/xml2sexprdata/, tests/sexpr2xmldata/: Added more data
files for new test cases
Mon Nov 13 17:18:00 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/xend_internal.c src/xml.c: fix for shareable drive support
rhbz#214908
2006-11-10 23:46:12 +00:00
Fri Nov 10 17:53:41 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/xml.c: Fix memory leak, by freeing xmlParserContextPtr object
Fri Nov 10 11:19:32 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/xend_internal.c src/xml.c: add an extra element currentMemory
to the XML description and handle its serialization back and
forth between XML and S-Expr
* tests/sexpr2xmltest.c tests/xml2sexprtest.c
tests/sexpr2xmldata/sexpr2xml-curmem.*
tests/xml2sexprdata/xml2sexpr-curmem.*: added specific regression
tests for this, this didn't disturb any of the other tests.
Thu Nov 9 15:39:19 CET 2006 Daniel Veillard <veillard@redhat.com>
* python/generator.py: changed the generator to generate a reference
from Domain class instances to the Connect they were issued from
should fix rhbz#204490
* docs//*: rebuilt
Thu Nov 9 10:22:43 CET 2006 Daniel Veillard <veillard@redhat.com>
* tests/reconnect.c: fixed the reconnect test when running as non-root
Wed Nov 8 13:03:41 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/virshdata/nodeinfo-custom.txt, docs/testnode.xml: Reduce amount
of RAM in test node to a sensible size to avoid integer wraparound on
32-bit archs.
Wed Nov 8 13:00:56 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/test.c, src/test.h: Added implementation of the virDomainGetOSType
driver method to the test hypervisor backend.
Wed Nov 8 16:58:56 CET 2006 Daniel Veillard <veillard@redhat.com>
* include/libvirt/virterror.h src/virterror.c src/xend_internal.c
src/xml.c: give proper indication of the failures raised by the
XML parser on not well formed XML, should fix rhbz#208545
Wed Nov 8 14:01:11 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/libvirt.c src/proxy_internal.c src/xs_internal.c: fix the
patch for rhbz#214264 in the case of Domain 0 on Xen and push the
defaulting to "linux" down to the xen specific parts.
Tue Nov 7 16:17:23 EDT 2006 Daniel P. Berrange <berrange@redhat.com>
* python/generator.py: Pass in connection object when generating
an exception
* python/libvir.py: Allow raw error object to be passed into the
python exception object.
* python/libvir.c: Added binding for virGetLastError and
virConnGetLastError
Tue Nov 7 15:58:43 EDT 2006 Daniel P. Berrange <berrange@redhat.com>
* src/xend_internal.c: Ensure that virConnectPtr object is passed
around to all functions which can throw errors, so that errors get
correctly associated with the connection, rather than global error
variables.
Tue Nov 7 16:33:43 CET 2006 Daniel Veillard <veillard@redhat.com>
* libvirt.spec.in: libvirt-devel depends on pkgconfig
* proxy/libvirt_proxy.c src/libvirt.c src/proxy_internal.[ch]
src/xs_internal.[ch]: the virtGetOsType entry point was calling
the xenstore directly instead of going though driver, refactored
and implemented a specific new RPC with the proxy when this is
called as non-root fixes rhbz#214264 .
Tue Oct 31 10:31:34 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/xend_internal.c: when getting informations about a non
existant domain, it is not a good idea to raise the HTTP
404 GET error, the handling is better done somewhere up in
the stack.
Tue Oct 24 15:31:23 EDT 2006 Daniel P.Berrange <berrange@redhat.com>
* python/generator.py, python/libvir.c: Drop python interpreter
lock when calling into C functions, and re-grab when invoking
error callback.
* python/libvirt_wrap.h: Convenience macros for grabbing / dropping
the python interpreter lock in threaded environment.
Mon Oct 16 17:10:15 CEST 2006 Daniel Veillard <veillard@redhat.com>
* config.h.in configure.in libvirt.spec.in docs/libvir.html
docs/news.html include/libvirt/libvirt.h: preparing release of
libvirt-0.1.8
* src/xen_internal.c: fixed a compilation problem
Thu Oct 12 17:31:13 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xen_internal.c: one of the fix for system with page size != 4k
was missing
Thu Oct 12 13:37:24 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xen_internal.c: applied patch from Philippe Berthault
fixing the vcpu number initialization
Wed Oct 11 17:16:44 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xen_internal.c: applied patch from Peter Vetere so that
crashed domains ain't reported as shut off.
Wed Oct 11 16:23:58 CEST 2006 Daniel Veillard <veillard@redhat.com>
* virsh.1: fixed some typo and unclear language pointed out by
Noriko Mizumoto
Mon Oct 9 09:34:42 EDT 2006 Daniel P. Berrange <berrange@redhat.com>
* src/xml.c, src/xend_internal.c: Added support for a <driver>
element in disk specification, allowing use of alternate Xen
drivers such as blktap.
* tests/xml2sexprtest.c, tests/sexpr2xmltest.c: Added tests for
new <driver> element, and blktap driver impl.
* tests/xml2sexprdata/*, tests/sexpr2xmldata/*: New / updated
data files for new <driver> element
Fri Oct 6 10:33:20 EDT 2006 Daniel P. Berrange <berrange@redhat.com>
* src/xend_internal.c: Fixed memory leak in xend_get_config_version
routine.
* src/xml.c: Fixed memory leaks in XML parsing routines relating
to VNC port, HVM boot devices, HVM floppy & CDROM, HVM features,
disk device type.
* tests/Makefile.am: Use --leak-check=full when running valgrind
to detect all leaks, in addition to memory corruption checks
* tests/sexpr2xmltest.c, tests/xml2sexprtest.c: Fixed memory leaks
in test harness leading to valgrind false-positives.
Mon Oct 2 23:16:06 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xen_internal.c: Daniel Berrange fixed some mlock size problem
doing a bit of cleanup too
Fri Sep 29 17:31:36 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/virsh.c: add #include <locale.h> to be able to compile without
optimization
Fri Sep 29 17:16:40 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xen_internal.c: fix for system with page size != 4k
Fri Sep 29 13:05:12 CEST 2006 Daniel Veillard <veillard@redhat.com>
* docs/bugs.html docs/libvir.html: added pointers on how to report
bugs in bugzilla as suggested by markmc
* src/xend_internal.c: first step for #208545 raise an error at the
libvirt level
Fri Sep 29 11:27:36 CEST 2006 Daniel Veillard <veillard@redhat.com>
* docs/* libvirt.spec.in configure.in NEWS: preparing release of 0.1.7
Thu Sep 21 10:19:02 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/xen_internal.c: Fork different version of getdomaininfo struct for
Xen 3.0.2, and 3.0.3 because the shared_info_frame field is different
size on between these versions on 32-bit platforms. Make callers use
appropriate struct version matched to hypervisor version, hiding detail
in macros to aid readability. Cleanup whitespace to remove tabs. Disable
xenHypervisorGetVcpus completely in proxy since its not used.
Thu Sep 21 10:19:02 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/xend_internal.c: Check if the physical CPU will fit in the maplen
provided by the caller when populating VCPU<->CPU mapping. This is because
XenD will return data for 32 physical CPUs, even if the box only has 4
CPUs. The caller of course will only have allocated a map big enough for
the actual number of physical CPUs. We simply check against maplen param
supplied by caller & discard info about CPUs which don't fit. Also santise
whitespace.
Fri Sep 22 11:02:48 CEST 2006 Daniel Veillard <veillard@redhat.com>
* docs/* libvirt.spec.in configure.in NEWS: preparing release of 0.1.6
Thu Sep 21 10:19:02 EDT 2006 Daniel Berrange <berrange@redhat.com>
* Makefile.am: Added po directory
* autogen.sh: Call autopoint to install the gettext infrastructure
* src/*.c, proxy/*.c: Pass all strings through gettext for translation.
Set up the text domains in libvirt, proxy & virsh at startup.
* libvirt.spec.in: Include compiled .po files in distro
* tests/virshdata/*.txt: Tweak expected data to take account of
some text changes.
Thu Sep 21 10:19:02 EDT 2006 Daniel Berrange <berrange@redhat.com>
* docs/*.html: re-generated documentation to pull in latest
APIs
Thu Sep 21 10:19:01 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/Makefile.am: add a tst target to ease building test progs
* src/xend_internal.c: fix the reconnection problem to xend pointed
by Philippe Berthault
* tests/Makefile.am tests/reconnect.c: add a specific test case
Tue Sep 19 16:59:53 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xen_internal.c: applied patch from Jim Fehlig, about
one of the content of the hypercall structures in 3.0.2
Thu Sep 14 10:33:23 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/xml.c: Append :disk for normal disk devices being created
when Xen >= 3.0.3, even though its technically optional
* src/xend_internal.c: Strip the :disk trailing component when
generating XML when Xen >= 3.0.3. We don't want to expose
that postfix in the <target> element, since its already set in
the device attribute on <disk> element.
* tests/sexpr2xmldata/*, tests/xml2sexprdata/*: Update to test
for handling of :disk postfix in sexpr/XML
* tests/virshtest.c, tests/sexpr2xmltest.c, tests/xml2sexprtest.c:
Cast size_t arg to an int to avoid format warnings from printf
Tue Sep 11 20:37:28 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/xml.c: Added support for setting VNC port when creating
domains with new (version 2) style XenD config
* tests/xml2sexprtest.c: Added test for setting VNC port
* tests/xml2sexprdata/*vncunused*: Data files for new VNC test
2006-09-12 01:21:15 +00:00
Tue Sep 11 20:23:42 EDT 2006 Daniel Berrange <berrange@redhat.com>
* docs/Makefile.am: Added test XML files to EXTRA_DIST
* tests/confdata/Makefile.am: Fix typo to ensure config
files needed by test are distributed
Tue Sep 11 20:11:05 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/xend_internal.c, src/xml.c: Added support for new 3.0.3
style XenD cdrom configuration for HVM guests.
* configure.in, tests/Makefile.am: Added new test directories
* tests/xml2sexprdata*, tests/sexpr2xmldata*: Removed config files
for test suite.
* tests/xml2sexprdata/*, tests/sexpr2xmldata/*: New home for test
suite config files
Tue Sep 5 13:50:05 MYT 2006 Daniel Veillard <veillard@redhat.com>
* NEWS configure.in docs//* include/libvirt/libvirt.h libvirt.specx.*:
preparing release 0.1.5
* proxy/libvirt_proxy.c src/xen_internal.c: tiny fixes
Tue Sep 5 13:24:30 MYT 2006 Daniel Veillard <veillard@redhat.com>
* src/xen_internal.c: finished to convert to the new hypervisor
calls the xenHypervisorGetVcpus entry point, though it is untested
Mon Sep 4 14:13:24 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/xen_internal.h: Added missing return(-1) statements
in xenHypervisorGetVcpus and xenHypervisorPinVcpu methods.
#ifndef out the pause/resume/etc methods from proxy code
Sun Sep 3 12:50:12 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/conf.c: Allow '_' in variable names, and don't fail if there
is a trailing ',' at the end of a list.
* tests/confdata/fc4.conf, tests/confdata/fc4.out: Expand test
config to include a '_' in a name, and a trailing ',' in a list.
2006-09-03 17:43:48 +00:00
Sun Sep 3 12:47:42 EDT 2006 Daniel Berrange <berrange@redhat.com>
* tests/.cvsignore, tests/confdata/.cvsignore: Ignore autogenerated
files from config data testsuite.
Sun Sep 3 12:34:23 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/virsh.c: use the return value of virConnectListDomains when
iterating over list of ids/names, because it is not neccessarily
the same as the value returned by virConnectNumOfDomains. Use qsort
to sort active domains by Id, and inactive domains by name, since
there is no guarenteed sort ordering when listing domains. For inactive
domains display a '-' instead of '-1' to make it clear they have no
sensible ID number.
Sat Sep 2 22:28:18 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xen_internal.c: converting to handle the new incompatible
hypercalls while still able to detect older versions, lot of
work, seems okay, there is just one function not yet converted
* src/xs_internal.c: dropping virConnectCheckStoreID()
Wed Aug 30 09:34:45 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/virsh.c: Added --all & --inactive flags to list command to control
inclusion of inactive domains in listing. Added start, define, undefine
commands to allow management of inactive domains.
Wed Aug 30 09:30:23 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/driver.h: Defined new driver entry points for ListDefinedDomains,
NumOfDefinedDomains, DomainStart, DomainUndefine, DomainDefineXML.
* src/xen_internal.c, src/xend_internal.c, src/xs_internal.h,
src/test.c, src/proxy_internal.c: Added NULL entries for new driver
backend APIs.
* src/libvirt.c: Hook up new driver entry points to corresponding
public API.
* src/libvirt_sym.version: Added virConnectNumOfDefinedDomains and
previously missing virConnectListDefinedDomains
* include/libvirt/libvirt.h: Added virConnectNumOfDefinedDomains
Tue Aug 29 23:48:43 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/conf.c: add missing entry point virConfGetValue()
Tue Aug 29 23:28:31 CEST 2006 Daniel Veillard <veillard@redhat.com>
* TODO libvirt.spec.in: update
* configure.in include/libvirt/virterror.h src/Makefile.am
src/conf.c src/conf.h src/virterror.c src/xen_internal.c:
adding a subset of Xen config file parser, and serializer
* tests/Makefile.am tests/conftest.c tests/test_conf.sh
tests/confdata/Makefile.am tests/confdata/fc4.conf
tests/confdata/fc4.out: adding test program for config in and out
2006-08-29 18:12:22 +00:00
Tue Aug 29 13:14:20 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/xend_internal.c: Add handling of HTTP 500 error code
which can be returned by XenD do indicate failure error when
performing the requested operation (Identified by Pete Vetere).
Tue Aug 29 15:41:46 CEST 2006 Daniel Veillard <veillard@redhat.com>
* python/libvir.c: Pete Vetere pointed out a bug in string cast
when handling errors in Python
Sat Aug 26 16:36:15 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/sexpr.c src/sexpr.h src/xend_internal.c src/xml.c: applied
patch from Jeremy Katz to add graphical console for PV Xen guests
Sat Aug 26 00:17:24 CEST 2006 Daniel Veillard <veillard@redhat.com>
* docs/site.xsl docs/*.html: add links to virt-manager
Fri Aug 25 17:42:12 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/virsh.c: Allow VIRSH_DEFAULT_CONNECT_URI to be set to
override the default Xen connection attempt in favour of a
different backend. Fix 'virsh list' so that it doesn't assume
there is always a Domain-0 (a Xen-ism).
Thu Aug 24 16:43:47 EDT 2006 Daniel Berrange <berrange@redhat.com>
* tests/virshtest.c: Test suite for validating output / operation
of various virsh commands.
* tests/virshdata/*.txt: Known good output for validating results
during testing
* tests/testutils.h, tests/testutils.c: Added convenience method
for forking a child process & capturing its output.
* tests/Makefile.am: Enable POSIX / XOpen standards
2006-08-24 16:00:19 +00:00
Thu Aug 24 11:03:42 EDT 2006 Daniel Berrange <berrange@redhat.com>
* tests/Makefile.am: Added a 'valgrind' target which simply
calls 'make check', but wrapping execution with valgrind to
detect any errors
Thu Aug 24 10:04:02 EDT 2006 Daniel Berrange <berrange@redhat.com>
* tests/xml2sexpr.c, tests/sexpr2xml.c: New tests suites for
validating the SEXPR<->XML conversion
* tests/*.sexpr, tests/*.xml: Data files for test suite
* src/xend_internal.h, src/xend_internal.c: Expose the method
for converting SEXPR -> XML to allow use by unit tests
* src/xs_internal.c: Check if connection is NULL before
deferencing it - test suite passes in NULL.
Mon Aug 21 13:00:03 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/virsh.c: check return code of virConnectListDomains in case
there was a failure, and stop the 'list' command immediately
rather than continuing with bogus domain ID data.
Fri Aug 18 15:22:23 EDT 2006 Daniel Berrange <berrange@redhat.com>
2006-08-18 20:20:50 +00:00
* src/xml.c: fix networking in paravirt guests - only set the
'(type ioemu)' option for HVM.
2006-08-17 18:39:32 +00:00
Thu Aug 17 19:42:50 CEST 2006 Daniel Veillard <veillard@redhat.com>
2006-08-18 20:20:50 +00:00
* src/xml.c: fix virParseUUID()
2006-08-17 18:39:32 +00:00
Wed Aug 16 19:07:52 CEST 2006 Daniel Veillard <veillard@redhat.com>
2006-08-18 20:20:50 +00:00
* NEWS configure.in doc//* include/libvirt/libvirt.h
include/libvirt/libvirt.h.in: preparing release of 0.1.4,
regenerated docs, fixed a few things
* src/proxy_internal.c src/test.c src/xend_internal.c:
a few trivial fixes
Wed Aug 16 12:33:02 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/virsh.c: Added 'setvcpus', 'setmem', 'setmaxmem'
commands to virsh shell. Allow full read-write connection
to non-Xen test hypervisor.
Wed Aug 16 11:38:02 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/test.c, src/test.h: Allow a hypervisor config to be
loaded from an external XML file. Implement drivers for
setMemory, setMaxMemory, createLinux, dumpXML, setVcpus.
* docs/testnode.xml, docs/testfc4.xml, docs/testfv0.xml:
Example config for using with test driver
2006-08-18 20:20:50 +00:00
Wed Aug 16 11:36:21 EDT 2006 Daniel Berrange <berrange@redhat.com>
2006-08-18 20:20:50 +00:00
* src/xend_internal.c, src/xml.c, src/xml.h: Refactored the
sexpr_uuid method into a re-usable virParseUUID method which
can be used by any backend
2006-08-18 20:20:50 +00:00
Wed Aug 16 11:31:59 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/libvirt.c: Remove some duplicated changes for VIR_DOMAIN_RO
accidentally left in place from last checkin. Tell the drivers to
be 'quiet' when opening a RW connection, to stop XenD driver
complaining when we open the test driver.
Wed Aug 16 17:24:59 CEST 2006 Daniel Veillard <veillard@redhat.com>
* include/libvirt/virterror.h src/libvirt.c src/virterror.c: enforce
blocking operations with side effect on read-only connections. Adds
a new error code and message.
Tue Aug 15 11:55:15 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/xml.c, src/xend_internal.c: Added a <features> block
to XML allowing enablement of guest CPU / system features.
Currently support PAE, ACPI, APIC for HVM domains.
* docs/libvir.html: Documented new <features> block and those
features enabled for HVM guests
Mon Aug 14 10:55:02 EDT 2006 Daniel Berrange <berrange@redhat.com>
* docs/libvir.html, docs/format.html: Updated description of
HVM boot device, and disk device configuration to match up
new new behaviour from previous changes
Fri Aug 11 09:37:02 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/libvirt.c: Avoid duplicated attempts to shutdown or
pause a domain if the first attempt succeeded.
* src/xend_internal.c, src/xml.c: When parsing UUID from
SEXPR also allow for format without any embedded '-'. The
ioemu: prefix is no longer required for HVM domains. It is
added when generating SEXPR, and removing when parsing SEXPR
never appearing in XML. CDROM & floppy devices for HVM domains
are now included in XML under <devices><disk> tag. The <disk>
tag now has a 'device' attribute allowing one of 'floppy',
'cdrom', 'disk' to be specified. If the <console> tag is present
in XML, HVM domains get a serial console activated. <boot>
tag now expects one of 'fd' 'hd' or 'cdrom' when specifying
boot device preference. Increased size of XML doc buffer from
1k to 4k to deal with large numbers of devices
Fri Aug 11 13:08:01 CEST 2006 Daniel Veillard <veillard@redhat.com>
* configure.in: updated python detection code from latest libxml2 one
* docs//*: rebuilt the docs
Thu Aug 10 15:28:52 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xml.c: markmc pointed out that using number(xpath) could lead
to NaN and following comparison would be wrong in a couple of places
if the element looked at was missing.
Wed Aug 9 10:17:03 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/driver.h, src/libvirt.c: Made the virDomainGetXMLDesc
method use the driver backends.
* src/xend_internal.c: Surround all functions which are not
needed for proxy with #ifndef PROXY. Refactor XML generator
functions to allow calling from proxy based on domain id
instead of virDomainPtr object
* src/xs_internal.c, src/xs_internal.h: Change signature
of method for extracting VNC port & console TTY to use domain
id instead of virDomainPtr. Surround functions not used by
proxy in #ifndef PROXY
* src/xml.c:Surround functions not used by proxy in #ifndef PROXY
* src/test.c, src/xen_internal.c: Added NULL entry for new
driver method for fetching XML
* src/proxy_internal.c, src/proxy_internal.h, proxy/libvirt_proxy.c:
Added implmentation of virDomainGetXMLDesc driver method which
goes via proxy.
Tue Aug 8 23:24:51 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/driver.h src/libvirt.c src/proxy_internal.c src/test.c
src/xen_internal.c src/xend_internal.c src/xend_internal.h
src/xml.c src/xs_internal.c: cleanups, force the new vCPU
and affinity entry point to go though the driver framework,
and fix a few warning showing up in my pedantic environment.
Mon Aug 7 18:33:45 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/xend_internal.c: Added details of serial console TTY to XML
representation of domain. Fetch VNC port from xenstore if it is
available (only in xen 3.0.3 or later).
* src/xs_internal.c, src/xs_internal.h: Added APIs for retrieving
the serial console TTY and VNC server port from xenstore.
* docs/libvir.html: Document 'port' attribute for VNC graphics,
and '<console>' element for serial console.
2006-08-07 20:55:03 +00:00
Mon Aug 7 21:57:41 CEST 2006 Daniel Veillard <veillard@redhat.com>
* TODO: updated with new items
Mon Aug 7 14:57:12 EDT 2006 Daniel Berrange <berrange@redhat.com>
2006-08-07 20:55:03 +00:00
* src/xend_internal.c: Corrected string length calculation when
appending a CDROM boot device element. Fixes corrupt XML structure.
Mon Aug 7 11:06:20 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/xend_internal.c: Added a 'port' attribute to the '<graphics>'
tag when display type is VNC, providing the port number on which
the VNC server is listening.
Mon Aug 7 18:47:48 CEST 2006 Daniel Veillard <veillard@redhat.com>
* include/libvirt/libvirt.h.in: previous change to libvirt.h should
have gone on .in too
Fri Aug 4 20:19:23 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/libvirt.c: Fix off-by-one in validated VCPU number (it is
zero based, not one based).
* include/libvirt/libvirt.h: Add some convenience macros for
calculating neccessary CPU map lengths & total host CPUs
* src/virsh.c: Add 'vcpuinfo' and 'vcpumap' commands
Fri Aug 4 14:45:25 CEST 2006 Daniel Veillard <veillard@redhat.com>
* python/generator.py: fix the generator when handling long integers
Dan Berrange reported problems due to this when using
virDomainSetMemory bindings
Fri Aug 4 11:49:44 CEST 2006 Daniel Veillard <veillard@redhat.com>
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/libvirt.c src/libvirt_sym.version src/xen_internal.c
src/xen_internal.h src/xend_internal.c src/xend_internal.h:
applied patch from Michel Ponceau and Philippe Berthault for
virtual CPU and affinity support plus a bit of cleanup.
Tue Aug 1 16:22:52 CEST 2006 Daniel Veillard <veillard@redhat.com>
* libvirt.spec.in: xen is now built for ia64, c.f. RH#199685
Fri Jul 28 16:18:30 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/virterror.c: Hugh Brock pointed out that error message
for bad argument were wrong and incomplete, this should fix it and
a few other problems in error reporting
Mon Jul 24 14:34:15 IST 2006 Mark McLoughlin <markmc@redhat.com>
* libvirt.spec.in: sync changes from fedora CVS
Thu Jul 20 09:05:15 EDT 2006 Daniel Veillard <veillard@redhat.com>
* proxy/Makefile.am src/xen_internal.c src/xend_internal.c: cleanup
code when compiled for the proxy, changed the command line macro and
remove warnings.
Wed Jul 19 17:26:48 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/*.c: Bulk replace 'informations' with 'information' to
correct English spelling
Thu Jul 13 23:33:48 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xml.c: applied patch from Peter Vetere to pass down the
UUID from the XML description if present when creating the domain.
Tue Jul 11 18:03:51 CEST 2006 Daniel Veillard <veillard@redhat.com>
* configure.in libvirt.spec.in docs/* NEWS: preparing release of
libvirt-0.1.3
* src/xend_internal.c: uninitialized var and disable TCP slow start
Mon Jul 10 14:19:52 CEST 2006 Daniel Veillard <veillard@redhat.com>
* docs/format.html docs/libvir.html docs/news.html: updated the XML
format documentation to cover the new HVM domains.
Mon Jul 10 12:27:17 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xend_internal.c src/xml.c: patches from Jim Fehlig for HVM
guests, plus XML format changes and merge from Mark McLoughlin
Fri Jul 7 09:47:14 EDT 2006 Daniel Berrange <berrange@redhat.com>
* src/xend_internal.c: changed xenDaemonLookupByID to simply do
an sexpr GET on /xend/domain/[ID] instead of listing all names
and iterating over /xend/domain/[NAME]. Reduces the running time
and number of GETs from O(n^2) to O(n).
Wed Jul 5 17:11:32 IST 2006 Mark McLoughlin <markmc@redhat.com>
* xml.c: allow a <domain> to not have any <disk> devices - e.g.
when using an NFS root.
Thu Jul 6 10:32:14 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xend_internal.c: fixed xenDaemonOpen() to try both unix and
http accesses by default and to use the provided URI otherwise,
applied Jim Fehlig patch working around xend connection close bug
* autogen.sh: fixed package name
Wed Jul 5 17:11:32 IST 2006 Mark McLoughlin <markmc@redhat.com>
* xml.c: make the entire <os> node optional if a bootloader
is specified. If we pass an image config to xend, the
bootloader gets ignored anyway.
Wed Jul 5 16:51:45 IST 2006 Mark McLoughlin <markmc@redhat.com>
* xml.c: only set bootloader flag when we actually get
a bootloader
Tue Jul 4 13:50:55 CEST 2006 Daniel Veillard <veillard@redhat.com>
* libvirt.spec.in proxy/Makefile.am: do the chown at the rpm packaging
level, to allow build as non-root
* src/xml.c: fix bug #197583 raised by markmc
Mon Jul 3 15:41:58 EDT 2006 Daniel Veillard <veillard@redhat.com>
* NEWS docs/* configure.in libvirt.spec.in include/libvirt/libvirt.h:
preparing release of 0.1.2
* src/proxy_internal.c: don't warn on open if using http and not the
proxy.
Mon Jul 3 13:54:03 EDT 2006 Daniel Veillard <veillard@redhat.com>
* libvirt.spec.in proxy/Makefile.am src/proxy_internal.c
src/xen_internal.c: fixing the proxy installation, integrate in
the spec file and fix a few bugs in the proxy, seems to behave
correctly now.
* docs/apibuild.py docs/*: fixing the doc and API generator
Mon Jul 3 11:21:10 EDT 2006 Daniel Veillard <veillard@redhat.com>
* proxy/libvirt_proxy.c src/proxy_internal.[ch] src/xend_internal.[ch]:
finished the last entry point missing for the proxy code.
Fri Jun 30 16:31:47 EDT 2006 Daniel Veillard <veillard@redhat.com>
* proxy/libvirt_proxy.c src/proxy_internal.c: more bug fixes,
virsh starts to work normally over the proxy. Still one entry
point missing but it's minor.
Thu Jun 29 23:57:35 EDT 2006 Daniel Veillard <veillard@redhat.com>
* proxy/libvirt_proxy.c src/proxy_internal.c src/xen_internal.c
src/xen_internal.h src/xend_internal.c src/xend_internal.h:
implemented id based lookup and other cleanups, virsh starts to
work, but still some TODOs
Thu Jun 29 22:19:51 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/proxy_internal.c src/proxy_internal.h src/driver.h src/libvirt.c
src/Makefile.am: moved proxy/proxy.h and proxy/proxy_client.c as
proxy_internal.[ch] and integrated them as a new driver.
* proxy/Makefile.am proxy/libvirt_proxy.c src/xen_internal.c
src/xen_internal.h src/xend_internal.c: various related cleanups.
Thu Jun 29 14:53:01 EDT 2006 Daniel Veillard <veillard@redhat.com>
* proxy/libvirt_proxy.c proxy/proxy.h proxy/proxy_client.c: more
progresses on the proxy implementation.
* src/xend_internal.c src/xend_internal.h: exported one routine
Wed Jun 28 19:23:25 CEST 2006 Daniel Veillard <veillard@redhat.com>
* configure.in Makefile.am proxy/Makefile.am proxy/libvirt_proxy.c
proxy/proxy.h proxy/proxy_client.c src/internal.h src/xen_internal.c
src/xend_internal.c: started working on a proxy to access xend
for unpriviledged users to avoid opening xend HTTP service to
serve those read-only operations.
Mon Jun 26 16:05:27 CEST 2006 Daniel Veillard <veillard@redhat.com>
* configure.in libvirt.spec.in docs/examples/* include/Makefile.am
include/libvirt/virterror.h python/generator.py python/libvir.c
python/libvirt_wrap.h src/driver.h src/internal.h src/test.h
src/virsh.c src/virterror.c src/xend_internal.c src/xend_internal.h
src/xml.c src/xml.h: moved the includes from include/ to
include/libvirt to reflect the installed include tree. This
avoid using "" in the includes themselves.
Wed Jun 21 14:41:04 CEST 2006 Daniel Veillard <veillard@redhat.com>
* NEWS libvirt.spec.in docs/*: preparing release of 0.1.1
Wed Jun 21 13:02:30 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/driver.h src/libvirt.c src/test.c src/xen_internal.c
src/xend_internal.c src/xs_internal.c: add driver numbers and
tweak a bit suspend/resume/destroy operation to avoid doing
them directly though the hypervisor if other succeeded first.
Wed Jun 21 12:23:15 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/xen_internal.c: try to autodetect the Xen hypervisor version
used and switch automatically. A bit nasty though.
Tue Jun 20 16:14:26 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/xen_internal.c: fix breakage introduced in Xen changeset 10277
Fri Jun 16 15:08:42 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/xen_internal.c src/xen_internal.h src/xs_internal.c: fix
a TODO in xs_internal.c pointed out by Philippe Berthault
Fri Jun 16 12:44:02 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/libvirt.c src/xen_internal.c src/xend_internal.c: more driver
related cleanups, nearly finished
Thu Jun 15 14:57:39 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/libvirt.c src/xend_internal.c src/xend_internal.h
src/xs_internal.c: more cleanups for the driver architecture
Wed Jun 14 18:59:30 EDT 2006 Daniel P. Berrange <berrange@redhat.com>
* src/test.h, src/test.c: Added implementation of the reboot
and shutdown methods for domains.
Wed Jun 14 11:20:23 EDT 2006 Daniel P. Berrange <berrange@redhat.com>
* src/libvirt.c: connect virDomainDestroy, virDomainSuspend,
virDomainResume, virDomainShutdown & virDomainReboot to the
driver backends.
Wed Jun 14 15:51:00 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/libvirt.c src/xend_internal.c src/xend_internal.h: cleaned up
virConnectListDomains and virConnectNumOfDomains, implemented xend
driver entry point for them.
Wed Jun 14 13:10:03 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/libvirt.c: Daniel P. Berrange pointed out a bug in virConnectOpen
Tue Jun 13 14:06:01 EDT 2006 Daniel P. Berrange <berrange@redhat.com>
* src/virsh.c: use 'double' instead of 'float' when calculating
'CPU time' field for dominfo command, to ensure no unneccessary
loss of precision converting from nanoseconds to seconds.
Tue Jun 13 18:35:22 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/libvirt.c src/xen_internal.c src/xend_internal.c
src/xs_internal.c: fix the connection and GetType initialization.
Tue Jun 13 16:37:27 EDT 2006 Daniel Veillard <veillard@redhat.com>
* docs//*: rebuilt the documentation
* src/driver.h src/libvirt.c src/test.c src/xen_internal.c
src/xend_internal.c src/xs_internal.c: started to fix some of
the driver related problem raised by Daniel Berrange, added a
ver version field to drivers.
Mon Jun 12 17:22:24 EDT 2006 Daniel P. Berrange <berrange@redhat.com>
* src/xend_internal.c: Call 'xenDomainGetVersion' when trying
to open a connection, as a sort of "ping" test to verify the
Xen daemon connection - fail the open method, if the "ping" is
not successful.
Mon Jun 05 22:31:20 EDT 2006 Daniel P. Berrange <berrange@redhat.com>
* src/test.c, src/test.h: New 'mock' hypervisor driver providing
a way to write predictable unit tests which exercise libvirt APIs.
* src/libvirt.c, src/Makefile.am: Integrate test hypervisor driver
Fri May 26 11:59:20 EDT 2006 Daniel P. Berrange <berrange@redhat.com>
* src/hash.c, src/internal.h: Switch the uuid parameter in virGetDomain
to be of type 'unsigned char' since its a raw UUID we're passing in,
not a printable one.
* src/libvirt.c: Remove bogus "unsigned char" -> "char" type casts. Hook
up the "domainLookupByID", "domainLookupByUUID", "domainLookupByName"
and "domainGetInfo" driver backend functions.
2006-05-29 16:05:05 +00:00
Mon May 29 17:02:26 CEST 2006 Karel Zak <kzak@redhat.com>
* src/libvirt_sym.version: added in missing symbols referenced by python
bindings (patch by Daniel P. Berrange)
* tests/Makefile.am: fixed include dirs to make VPATH builds work
(patch by Daniel P. Berrange)
2006-05-29 15:39:31 +00:00
Mon May 29 16:33:39 CEST 2006 Karel Zak <kzak@redhat.com>
* src/virsh.c: improved vshCommandOptDomain(), added <name> to the
connect command and minor changes to Daniel B.'s patch
Fri May 26 11:40:20 EDT 2006 Daniel P. Berrange <berrange@redhat.com>
* src/virsh.c: added 'domuuid' command to display printable UUID
string for a domain. Added '--connect' argument to allow the name
of the hypervisor connection passed to virConnect to be set.
2006-05-22 14:38:33 +00:00
Mon May 22 15:34:20 CEST 2006 Karel Zak <kzak@redhat.com>
* src/virsh.c: added UUID: to the dominfo command, vshPrint() refactoring,
added support for domain look up by UUID
* virsh.1: added information about UUID, fixed list of commands and
domains statuses
* src/libvirt.c include/libvirt.h.in src/libvirt_sym.version: added
virDomainGetUUIDString() and virDomainLookupByUUIDString()
2006-05-10 14:48:20 +00:00
Wed May 10 15:50:32 CEST 2006 Karel Zak <kzak@redhat.com>
* src/virterror.c include/virterror.h: added VIR_FROM_RPC
* src/xmlrpc.c: added checks and _virRaiseError()
2006-05-10 12:15:49 +00:00
Wed May 10 13:17:00 CEST 2006 Karel Zak <kzak@redhat.com>
* src/xml.c src/xml.h: added virBufferNew() and virBufferStrcat()
* tests/xmlrpctest.c: added performace tests for virBufferStrcat() and
virBufferVSprintf()
* src/xmlrpc.c: used virBufferStrcat()
2006-05-09 15:35:46 +00:00
Tue May 9 16:37:22 CEST 2006 Karel Zak <kzak@redhat.com>
* tests/Makefile.am tests/xmlrpctest.c tests/testutils.h: added test
directory with basic test utils
* tests/test_xmlrpc.sh tests/xmlrpcserver.py tests/xmlrpctest.c: added
simple XML-RPC tests agains Python SimpleXMLRPCServer
* src/xmlrpc.c src/xmlrpc.h: minor refactoring, fixed gcc warnings
* src/xml.c src/xml.h: added virBufferFree()
Fri Apr 28 18:31:49 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/hash.c src/internal.h src/libvirt.c src/virterror.c
src/xml.h include/libvirt.h[.in] include/virterror.h: started
adding new APIs, some still TODO, and not tested yet
Thu Apr 27 14:17:04 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/xml.c src/xend_internal.c TODO: added uuid to the XML
serialization
Wed Apr 26 08:32:38 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xml.c: applied patch from Jeremy Katz to not require a
root entry in XML nor try to extract it from command line
informations.
Wed Apr 26 07:45:28 CEST 2006 Daniel Veillard <veillard@redhat.com>
* docs//* : fixed perl binding URL to point to CPAN as provided by
Daniel P. Berrange.
Tue Apr 25 17:56:32 CEST 2006 Daniel Veillard <veillard@redhat.com>
* configure.in: patch for ncurses fallback from Jim Fehlig
Tue Apr 25 17:10:10 CEST 2006 Daniel Veillard <veillard@redhat.com>
* configure.in libvirt.spec.in docs/examples/Makefile.am
docs/examples/index.py docs/examples/python/*: integrated
examples for Python from David Lutterkort
Tue Apr 25 13:37:22 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/xend_internal.c: applied patch from Jim Fehlig when parsing
domain S-Expr the kernel may not be provided (Dom0)
Mon Apr 24 18:23:29 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/hash.c src/internal.h: add virGetDomainByID() to speed up
some processing but not used yet
* src/libvirt.c src/xen_internal.c src/xen_internal.h: added domain
listing and number queries entry points based on the hypervisor
which should speed up some processing as root.
Thu Apr 20 14:31:13 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/xend_internal.c: fix an uninitialized memory access in error
reporting.
Thu Apr 13 17:19:25 EDT 2006 Daniel Veillard <veillard@redhat.com>
* include/libvirt.h include/libvirt.h.in doc/*: added new entry point
virDomainSetMemory to set up the target memory use for a domain
* src/driver.h src/libvirt.c src/xen_internal.c src/xend_internal.[ch]
src/xs_internal.[ch]: added a new entry point in the drivers for this,
also fixed the xen store entry, as changing
/local/domain/$$/memory/target affects the target memory not the max,
apparently max is not visible at the xenstore level (or I missed it)
Mon Apr 10 15:15:13 CEST 2006 Daniel Veillard <veillard@redhat.com>
* NEWS configure.in libvirt.spec.in docs/*: documented and
regenerated for release of 0.1.0
* Makefile.am virsh.1: added man page from Andrew Puch
Mon Apr 10 09:32:29 CEST 2006 Daniel Veillard <veillard@redhat.com>
* src/xend_internal.c src/xml.c: applied patch from Jim Fehlig
for lifecycle events
* docs/format.html docs/libvir.html: added the associated docs for
the new constructs
* TODO: small update
Sun Apr 9 13:10:34 EDT 2006 Daniel Veillard <veillard@redhat.com>
* TODO src/hash.[ch] src/internal.h src/libvirt.c src/xend_internal.c
src/xs_internal.c: implementing domain pointers unification, thread
safety and reference counting for domain and connections, this was
the last critical change needed before making further progresses at
the API level. Still a couple fo things TODO for this, unification
at the Python level and adding UUID to hash. All domain/connect alloc
and free routines are now centralized in hash.c
* docs/APIchunk1.html docs/libvirt-api.xml docs/libvirt-refs.xml
docs/html/libvirt-libvirt.html: regenerated the docs, that doesn't
change the API.
Thu Apr 6 11:32:46 CEST 2006 Karel Zak <kzak@redhat.com>
* src/virsh.c: use stdout for standard outputs, improve
allocation checks
Wed Apr 5 09:32:54 EDT 2006 Daniel Veillard <veillard@redhat.com>
* src/hash.c: tiny fix
* src/internal.h: starting to work on reentrancy
* src/libvirt.c: applied patch from Jim Fehlig to fix
virDomainLookupByID when run as root.
2006-04-04 21:52:31 +00:00
Tue Apr 4 22:49:33 CEST 2006 Karel Zak <kzak@redhat.com>
* src/virsh.c: rename dstate, idof and nameof to domstate,
domname and domid
Tue Apr 4 12:41:53 CEST 2006 Karel Zak <kzak@redhat.com>
* src/virsh.c: add new command "nodeinfo"
* include/libvirt.h.in: fix typo (virNodeInfo.memory is in kB)
* docs/FAQ.html docs/libvir.html src/virsh.c: rename command
"dinfo" to "dominfo"
Mon Apr 3 14:46:39 EDT 2006 Daniel Veillard <veillard@redhat.com>
* include/libvirt.h[.in] src/driver.h src/libvirt.c
src/libvirt_sym.version src/*_internal.[ch]: added an entry
point for reboot and corresponding driver plug
* src/virsh.c: added a reboot option using it
* docs/*: regenerated
Thu Mar 30 16:38:18 EST 2006 Daniel Veillard <veillard@redhat.com>
* src/xend_internal.c: applied patch from Daniel P. Berrange,
plus a bit of code cleanup
Thu Mar 30 16:04:47 EST 2006 Daniel Veillard <veillard@redhat.com>
* src/virsh.c: allocation check (Jim Meyering) and adding a
new create command
* src/xend_internal.c src/xml.c: trying to cope with the new
xvda domains states generated on FC5, but Dom0 bootloader
really break the model, so that doesn't work.
Thu Mar 30 12:15:46 EST 2006 Daniel Veillard <veillard@redhat.com>
* src/virsh.c: catching memory allocation error and existing, as
pointed by Jim Meyering
2006-03-29 14:35:52 +00:00
Wed Mar 29 16:36:24 CEST 2006 Daniel Veillard <veillard@redhat.com>
* doc/*: rebuilt
Wed Mar 29 13:34:25 EST 2006 Daniel Veillard <veillard@redhat.com>
* python/libvir.c: fixed a bug in the new wrapper
* python/tests/Makefile.am python/tests/node.py: added a new test for
the new API
* python/tests/create.py: remove a debug
Wed Mar 29 14:43:56 CEST 2006 Daniel Veillard <veillard@redhat.com>
* include/libvirt.h[.in] include/virterror.h src/driver.h
src/internal.h src/libvirt_sym.version src/xen_internal.c
src/xs_internal.c: added a new entry point to get node hardware
informations virGetNodeInfo, and associated driver hook.
* src/xend_internal.c: implemented the node and version information
hooks for the Xen Daemon
* python/libvir.c python/libvirt-python-api.xml python/generator.py:
also added Python bindings for the new call
Tue Mar 28 16:40:08 CEST 2006 Daniel Veillard <veillard@redhat.com>
* python/libvir.c: call the initialize entry point
* src/libvirt_sym.version: add initialize entry point
* src/libvirt.c: make sure we always initialize the lib
* python/tests/*.py: start updating exemple for exception
handling as pointed by Jim Meyering
Tue Mar 28 11:49:59 CEST 2006 Daniel Veillard <veillard@redhat.com>
* doc/site.xsl doc/libvir.html doc/*: added informations about
the Perl bindings, regenerated
* python/libvirt_wrap.h: added a missing include.
Mon Mar 27 17:22:16 CEST 2006 Daniel Veillard <veillard@redhat.com>
* doc/*: updated module list and rebuilt
* include/libvirt.h include/libvirt.h.in: added intialization function
* include/virterror.h src/virterror.c: one more error code
* src/internal.h: first part of Jim's format checking
* src/libvirt.c src/xen_internal.[ch] src/xend_internal.[ch]
src/xs_internal.[ch]: initialization and registration of drivers
Sat Mar 25 11:45:06 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/Makefile.am: add driver.h to SOURCES as pointed by Jim Meyering
* doc/*: rebuilt
Sat Mar 25 11:38:29 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/virterror.c: add message as pointed by Jim Meyering
Fri Mar 24 23:57:56 CET 2006 Daniel Veillard <veillard@redhat.com>
* include/virterror.h: fix typos pointed by Jim Meyering
Fri Mar 24 23:36:05 CET 2006 Daniel Veillard <veillard@redhat.com>
* include/virterror.h: applied patch from Daniel Berrange for out of
tree compiles.
Fri Mar 24 14:17:52 CET 2006 Daniel Veillard <veillard@redhat.com>
* libvirt.pc.in: applied patch from Daniel Berrange to fix --cflags
Fri Mar 24 14:03:26 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/Makefile.am: fix out of tree build
Thu Mar 23 16:40:37 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/xs_internal.c src/xs_internal.h include/virterror.h
src/virterror.c: created a new module related to Xen Store accesses
* src/libvirt.c src/xen_internal.[ch] src/xend_internal.[ch]:
nearly completed the separation of the code from the different modules
Wed Mar 22 14:43:16 CET 2006 Daniel Veillard <veillard@redhat.com>
* python/tests/create.py: add one more image path
* src/libvirt.c src/xend_internal.c src/xend_internal.h: more work
on the xend refactoring
Wed Mar 22 13:34:32 EST 2006 Daniel Veillard <veillard@redhat.com>
* python/tests/create.py: adapt to new naming scheme in FC5
Tue Mar 21 00:40:29 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/driver.h src/xen_internal.c: just add a driver block for
the Xen hypervisor direct access module. Need to convert
xend_internal.[ch] and make one for the Xenstore now ...
Mon Mar 20 18:43:19 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/driver.h src/internal.h src/libvirt.c src/xen_internal.c
src/xen_internal.h docs/apibuild.py: starting the refactoring,
first the direct Xen hypervisor module. New header describing the
entry points of a driver.
Wed Mar 15 13:10:25 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/hash.c src/hash.h src/internal.h src/libvirt.c src/sexpr.c
src/sexpr.h src/virsh.c src/virterror.c src/xen_internal.c
src/xen_internal.h src/xend_internal.c src/xend_internal.h
src/xml.c src/xml.h: applied cb/indent to homogenize the source
style, as a first pass.
Fri Mar 10 11:07:58 CET 2006 Daniel Veillard <veillard@redhat.com>
* configure.in: applied patch for --with-xen-distdir option from
Ronald Aigner
* docs/site.xsl docs/*.html: added link to Bugzilla
Sat Mar 4 09:59:13 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/xml.c: another patch from David Lutterkort fixing a typo
when generating physical block devices descriptions.
Sat Mar 4 09:56:18 CET 2006 Daniel Veillard <veillard@redhat.com>
* libvirt.spec.in: applied patch from David Lutterkort adding
missing reqs for readline.
Tue Feb 28 15:21:48 CET 2006 Daniel Veillard <veillard@redhat.com>
* NEWS configure.in libvirt.spec.in include/libvirt.h docs/*:
preparing release 0.0.6
Tue Feb 28 14:57:25 CET 2006 Daniel Veillard <veillard@redhat.com>
* docs/errors.html docs/libvir.html docs/*: added a page about
error handling and regenerated the docs
Tue Feb 28 13:12:50 CET 2006 Daniel Veillard <veillard@redhat.com>
* TODO: updated
* python/Makefile.am python/generator.py python/libvir.c
python/libvir.py: improved python binding, raise exception
when an instance creation or lookup fails, and add support
for the global error handler, per conn handler still needed
* python/tests/error.py python/tests/Makefile.am: adding a
regression test
2006-02-27 22:35:26 +00:00
Mon Feb 27 17:36:29 EST 2006 Daniel Veillard <veillard@redhat.com>
* doc//*: rebuilt
Mon Feb 27 17:33:16 EST 2006 Daniel Veillard <veillard@redhat.com>
* TODO: updated, and added python hooks for error handling
* include/virterror.h src/virterror.c src/xml.c: error interception
and reporting should be done.
Mon Feb 27 16:42:46 EST 2006 Daniel Veillard <veillard@redhat.com>
* src/libvirt.c src/xen_internal.[ch]: virConnectOpenReadOnly()
should not emit error when failing to open the hypervisor proc
entry point.
Mon Feb 27 16:32:55 EST 2006 Daniel Veillard <veillard@redhat.com>
* include/virterror.h src/libvirt_sym.version: exported
virDefaultErrorFunc()
* src/sexpr.c src/xen_internal.c src/virterror.c include/virterror.h:
adding more error reporting though the code, nearly complete.
* src/sexpr.c: added specific error function to avoid an error report.
Mon Feb 27 14:56:57 EST 2006 Daniel Veillard <veillard@redhat.com>
* include/virterror.h src/virterror.c src/xend_internal.c: more work
plugging in the error system in the code.
Mon Feb 27 17:25:48 CET 2006 Daniel Veillard <veillard@redhat.com>
* TODO: updated
* include/virterror.h src/internal.h src/libvirt.c src/virterror.c
src/xend_internal.c: commiting a first pass at adding error handling
in the code, not finished, but it starts to work, need more coverage
and testing.
Fri Feb 24 23:33:55 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/Makefile.am src/internal.h src/libvirt.c src/libvirt_sym.version
src/virterror.c include/Makefile.am include/virterror.h: adding
the public APIs for errors, callbacks and synchronous. The boring
stuff is still left to do, plugging it. Also need to be exposed
at the python level.
* doc//*: rebuilt
Fri Feb 24 22:17:12 CET 2006 Daniel Veillard <veillard@redhat.com>
* docs/index.py docs/search.php: fixing the search engine.
Fri Feb 24 13:25:36 CET 2006 Daniel Veillard <veillard@redhat.com>
* python/generator.py python/libvir.c python/libvirt-python-api.xml:
UUID strings can contain zeroes, so the autogenerated conversion
functions don't work.
Thu Feb 23 06:24:46 EST 2006 Daniel Veillard <veillard@redhat.com>
* src/libvirt.c: fixing a bug before the release of 0.0.5
* python/generator.py python/libvir.c python/libvirt-python-api.xml:
also fixing the binding for getting a domain UUID
* python/tests/Makefile.am python/tests/uuid.py: added a test
for the new UUID API
Thu Feb 23 11:41:06 CET 2006 Daniel Veillard <veillard@redhat.com>
* NEWS configure.in docs/libvir.html docs/news.html: preparing the
release of 0.0.5
* include/libvirt.h.in: fixed APIs definition
Thu Feb 23 05:31:46 EST 2006 Daniel Veillard <veillard@redhat.com>
* python/tests/Makefile.am: added the create.py in the regression tests
Thu Feb 23 05:13:03 EST 2006 Daniel Veillard <veillard@redhat.com>
* include/libvirt.h[.in] src/libvirt.c src/xend_internal.[ch]
src/libvirt_sym.version: added virDomainLookupByUUID and
virDomainGetUUID to be able to use the persistant UUID names
* docs//*: rebuilt the docs following the API extension
Wed Feb 22 11:53:45 CET 2006 Daniel Veillard <veillard@redhat.com>
* configure.in libvirt.spec.in docs/Makefile.am docs/devhelp/*:
added devhelp docs support, based on libxml2 stylesheets
Wed Feb 22 09:57:11 CET 2006 Daniel Veillard <veillard@redhat.com>
* TODO: updated
* libvirt.spec.in: package the examples in the doc
* src/Makefile.am: forgot to add xml.h
2006-02-21 21:01:09 +00:00
Tue Feb 21 22:00:11 CET 2006 Karel Zak <kzak@redhat.com>
* TODO: added virsh part
Tue Feb 21 09:14:07 EST 2006 Daniel Veillard <veillard@redhat.com>
* Makefile.am: extended make tests to run those in docs/examples
* docs/examples/suspend.c docs/examples/*: added an example of
suspend/resume and regenerated
Tue Feb 21 14:21:39 CET 2006 Daniel Veillard <veillard@redhat.com>
* TODO: updated
* python/tests/Makefile.am: fix a small PYTHONPATH bug
* docs//*: fixed the xsl a bit for toc names, added doc for
the python bindings, regenerated
Tue Feb 21 00:06:30 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/libvirt.c src/xend_internal.c src/xend_internal.h: move the
XML dump function around to make sure all entry points are centralized
in libvirt.c and also avoid doc generation troubles.
* docs/examples/Makefile.am docs/examples/index.py: fix the makefile
a bit.
* TODO: updated
* docs/format.html: added a description of the XML used for the
domains.
* docs//*: rebuilt
Mon Feb 20 21:48:55 CET 2006 Daniel Veillard <veillard@redhat.com>
* docs/examples/examples.xsl docs/examples/index.html
docs/site.xsl: integates the examples page in the web site
* docs//* : fixed generator and rebuilt the docs
* python/tests/basic.py python/tests/create.py: couple cleanups
Mon Feb 20 12:20:32 EST 2006 Daniel Veillard <veillard@redhat.com>
* TODO: updated
* include/libvirt.h include/libvirt.h.in: cleanup
* src/libvirt.c: remove debugging output
* src/xend_internal.c src/xml.c src/xml.h: reimplement
virDomainGetXMLDesc() based on xend interface, now work as user too.
Fri Feb 17 08:17:36 EST 2006 Daniel Veillard <veillard@redhat.com>
* python/tests/create.py: trying to make test more generic, but it's
difficult since it requires a system image
* src/libvirt.c src/xend_internal.c: fixed the shutdown API which
was broken due to a bad reason at the xend level.
Thu Feb 16 17:47:00 EST 2006 Daniel Veillard <veillard@redhat.com>
* configure.in src/Makefile.am: adding dependency to libxml2
* include/libvirt.h* src/libvirt.c src/xend_internal.[ch]
src/xml.[ch]: added XML parsing for Xen domain descriptions
needed for creates, plugged in a converter to s-exp and
xend call. Modified the virDomainCreateLinux() to reflect
that XML based description. Seems to work.
* python/tests/create.py: added a test case which seems to work
not tested much yet
* docs/*: regenerated
Wed Feb 15 08:20:23 EST 2006 Daniel Veillard <veillard@redhat.com>
* configure.in libvirt.spec.in include/libvirt.h.in python/Makefile.am
src/Makefile.am: fix rpm packaging problems whith head, more
LIBVIR -> LIBVIRT changes.
Tue Feb 14 15:29:01 EST 2006 Daniel Veillard <veillard@redhat.com>
* Makefile.am configure.in python/Makefile.am python/tests/Makefile.am
python/tests/basic.py: added first python test script and
a 'make tests' target
Fri Feb 10 16:45:50 CET 2006 Daniel Veillard <veillard@redhat.com>
* libvirt.pc.in: Karel pointed out the name hadn't been updated
Fri Feb 10 11:30:41 EST 2006 Daniel Veillard <veillard@redhat.com>
* python/libvir.c: fixed one more problem prior to 0.0.4
Fri Feb 10 11:21:53 EST 2006 Daniel Veillard <veillard@redhat.com>
* NEWS configure.in docs/libvir.html docs/news.html include/libvirt.h
libvirt.spec.in: preparing 0.0.4 release
Fri Feb 10 11:09:11 CET 2006 Daniel Veillard <veillard@redhat.com>
* README TODO config.h.in libvirt.pc.in: more cleanups.
Fri Feb 10 09:42:45 CET 2006 Daniel Veillard <veillard@redhat.com>
* NEWS docs/*: regenerated and updated the docs post 0.0.3 release
Fri Feb 10 09:39:23 CET 2006 Daniel Veillard <veillard@redhat.com>
* autogen.sh configure.in: fixed snapshot autogeneration, had to
tweak a few things
Wed Feb 8 11:43:43 EST 2006 Daniel Veillard <veillard@redhat.com>
* //* : renamed the project libvirt , this affects all makefiles,
the specs, the icons, the docs, etc ...
* configure.in: prepare for 0.0.3
2006-02-03 14:49:41 +00:00
Fri Feb 3 15:47:32 CET 2006 Karel Zak <kzak@redhat.com>
* src/virsh.c: fix order of the save command options
Tue Jan 31 19:12:19 CET 2006 Daniel Veillard <veillard@redhat.com>
* configure.in docs/examples/*: starting to add examples. the XSLT
still need to be fixed for web site
Tue Jan 31 11:22:51 CET 2006 Daniel Veillard <veillard@redhat.com>
* python/*: update of the python bindings, fix names, add
missing features like list of domains and domain info extraction
Tue Jan 31 11:21:56 CET 2006 Daniel Veillard <veillard@redhat.com>
* configure.in libvir.spec.in NEWS docs/*: commiting the state of 0.0.2
release
Sun Jan 29 11:55:13 CET 2006 Daniel Veillard <veillard@redhat.com>
* NEWS docs/news.xsl: added stylesheet to generate NEWS file
* docs/*: updated docs preparing for the release
Sun Jan 29 09:52:03 CET 2006 Daniel Veillard <veillard@redhat.com>
* docs/site.xsl docs/*.html: credits to Diana Fong for graphics
and web site design
Sat Jan 28 21:24:05 CET 2006 Daniel Veillard <veillard@redhat.com>
* python/libvir.c: fix a stupid bug in python bindings (DomainDestroy
is still mishandled though)
Fri Jan 27 09:58:31 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/libvir.c src/xml.c: applied patch from Anthony Liguori
to remove the XenStore transactions as this is not needed
anymore.
Thu Jan 26 13:10:43 CET 2006 Daniel Veillard <veillard@redhat.com>
* TODO: updated
* docs/search.php: use the new web site design
* python/generator.py: fix a generation bug on python keyword
2006-01-25 09:46:22 +00:00
Tue Jan 24 11:44:53 CET 2006 Karel Zak <kzak@redhat.com>
* src/libvir_sym.version: add virDeomainRestore and virDomainSave
* src/virsh.c: support '=' in options, fix command grammar
* src/libvir.c: add conn->xshandle checks
Tue Jan 24 14:09:37 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/libvir.c: Karel pointed out handle was lost in
virConnectOpenReadOnly()
Mon Jan 23 23:53:07 CET 2006 Daniel Veillard <veillard@redhat.com>
* docs/site.xsl docs/*.png docs/*.html: update the images from Diana,
added favicon to page.
* src/libvir.c: reorganized the include imports.
Mon Jan 23 14:23:16 CET 2006 Daniel Veillard <veillard@redhat.com>
* docs/*: augment and try to complete the doc in its current state
Sun Jan 22 17:26:20 CET 2006 Daniel Veillard <veillard@redhat.com>
* docs/*: started to augment and update the documentation
Sat Jan 21 23:33:46 GMT 2006 Daniel Veillard <veillard@redhat.com>
* docs//*: mostly finished the revamp in the plane, starts to look good
Fri Jan 20 16:48:05 CET 2006 Daniel Veillard <veillard@redhat.com>
* docs/* : total revamp of the web site based on Diana Fong design
but not completely integrated yet
Fri Jan 20 10:57:44 CET 2006 Daniel Veillard <veillard@redhat.com>
* include/libvir.h include/libvir.h.in src/libvir.c: revamped the
restore API (though it would be better if it was returning
a domain pointer in case of success)
* src/virsh.c: added save and restore to the commands, tested,
the option handling need work though
Thu Jan 19 11:21:57 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/libvir.c src/xend_internal.c src/xend_internal.h: continue
the integration of more xend based accesses, virsh seems to work
without accessing the xen store now.
Wed Jan 18 19:57:53 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/libvir.c: small change w.r.t. reboot.
Wed Jan 18 11:32:04 CET 2006 Daniel Veillard <veillard@redhat.com>
* include/libvir.h include/libvir.h.in src/libvir.c: more integration
of libxend capabilities, including checkpointing and restoring
in a file.
* docs//*: regenerated the docs
Tue Jan 17 17:53:43 CET 2006 Daniel Veillard <veillard@redhat.com>
* include/libvir.h[.in]: added VIR_DOMAIN_CRASHED status, small
doc fix
* src/virsh.c: fix a integer being formatted as %s in idof
* src/internal.h src/libvir.c src/xend_internal.[ch]: started to
integrated the xend back-end, especially for getting informations
about a domain.
Fri Jan 13 17:39:24 CET 2006 Daniel Veillard <veillard@redhat.com>
* include/libvir.h.in include/libvir.h src/internal.h src/libvir.c
src/xend_internal.c src/xend_internal.h: starting to plug the
xend code in, replacing structures mostly, but not finished.
Thu Jan 12 16:36:21 CET 2006 Daniel Veillard <veillard@redhat.com>
* src/Makefile.am src/xend_internal.c src/xend_internal.h:
added more of Anthony Liquori libxend code, commented and reformatted
this still need to be plugged, it's still dead code ATM.
Wed Jan 11 14:57:01 CET 2006 Daniel Veillard <veillard@redhat.com>
* docs/libvir.html: grammatical fix
* src/Makefile.am src/sexpr.c src/sexpr.h: starting to integrate
Anthony Liquori libxend code
* src/libvir.c: fix an uninitialized value
Wed Dec 21 17:58:45 CET 2005 Daniel Veillard <veillard@redhat.com>
* docs/architecture.* docs/*: added a section on the architecture
and regenerated the docs.
Mon Dec 19 19:04:11 CET 2005 Daniel Veillard <veillard@redhat.com>
* NEWS docs/libvir.html docs/news.html: preparing 0.0.1 release
Mon Dec 19 17:32:22 CET 2005 Daniel Veillard <veillard@redhat.com>
* Makefile.am configure.in libvir.spec.in python/*: added a first
version for python bindings, heavilly based on libxml2/libxslt
way of doing things, maybe this need to be revisited. Added packaging
too.
* src/hash.h: fixed the Copyright notice.
2005-12-16 18:41:46 +00:00
Fri Dec 16 19:35:29 CET 2005 Karel Zak <kzak@redhat.com>
* src/xml.c src/internal.h src/libvir.c: struct checks cleanup,
add macros VIS_IS_DOMAIN(), VIR_IS_CONNECT() and VIR_IS_CONNECTED_DOMAIN()
Fri Dec 16 14:26:05 CET 2005 Daniel Veillard <veillard@redhat.com>
* libvir.spec.in src/Makefile.am: cleaned up the spec file, removed
static libraries, adding virsh as an installed program
Fri Dec 16 13:59:35 CET 2005 Daniel Veillard <veillard@redhat.com>
* src/libvir_sym.version: oops forgot to export the new symbol
Fri Dec 16 13:15:04 CET 2005 Daniel Veillard <veillard@redhat.com>
* include/libvir.h include/libvir.h.in src/internal.h src/libvir.c:
adding the virDomainShutdown() API
* src/virsh.c: adding a shutdown command
* docs/*: regenerated
Fri Dec 16 01:43:18 CET 2005 Karel Zak <kzak@redhat.com>
* include/libvir.h.in: add missing declaration of virDomainGetXMLDesc()
* include/libvir.h.in src/libvir.c src/virsh src/libvir_sym.version: add
virDomainGetOSType()
* src/internal.h src/libvir.c src/xml.c: add internal function virDomainGetVM(),
move virDomainGetVMInfo() from src/xml.c
2005-12-15 17:00:43 +00:00
Thu Dec 15 17:56:27 CET 2005 Karel Zak <kzak@redhat.com>
* src/virsh.c: remove --id / --name options
Wed Dec 14 16:28:24 CET 2005 Daniel Veillard <veillard@redhat.com>
* src/xml.c: add dump of os/boot informations
Wed Dec 14 13:35:39 CET 2005 Daniel Veillard <veillard@redhat.com>
* src/xml.c: added dump of physical vbd and read-only status
Wed Dec 14 12:20:06 CET 2005 Daniel Veillard <veillard@redhat.com>
* src/xml.c: started to add block devices and interfaces descriptions
in the XML dump.
Tue Dec 13 17:20:11 CET 2005 Daniel Veillard <veillard@redhat.com>
* include/libvir.h src/Makefile.am src/internal.h src/libvir.c
src/libvir_sym.version src/virsh.c src/xml.c: started working on
the XML dump, added a dumpxml virsh version and a bit of
infrastructure code. Found a way to detect dead ID from xenstore
data.
Mon Dec 12 14:21:18 CET 2005 Daniel Veillard <veillard@redhat.com>
* src/libvir.c src/xen_internal.c src/xen_internal.h: completing the
API implementation, only CreateLinux is now missing.
Fri Dec 9 15:39:18 CET 2005 Daniel Veillard <veillard@redhat.com>
* docs/search.php docs/index.py docs/*.xsl docs/html/*: fixed the
page generation, added the search engine.
Fri Dec 9 14:03:13 CET 2005 Daniel Veillard <veillard@redhat.com>
* docs/*: extended the documentation
Fri Dec 9 11:15:41 CET 2005 Daniel Veillard <veillard@redhat.com>
* configure.in: adding --without-depends to make dist on non
Xenified machine.
Fri Dec 9 00:47:12 CET 2005 Daniel Veillard <veillard@redhat.com>
* Makefile.am include/libvir.h.in libvir.pc.in: various fixes.
* docs/*: regenerated the docs
Fri Dec 9 00:02:06 CET 2005 Daniel Veillard <veillard@redhat.com>
* src/virsh.c: added support for suspend/resume/destroy, validating
the previous code.
Thu Dec 8 18:16:20 CET 2005 Daniel Veillard <veillard@redhat.com>
* src/libvir.c src/xen_internal.c src/xen_internal.h: implement
Pause, Resume, Destroy, but untested yet.
Thu Dec 8 17:43:11 CET 2005 Daniel Veillard <veillard@redhat.com>
* include/libvir.h src/libvir.c src/libvir_sym.version: adding
virDomainFree()
* docs/*: regenerated the docs
Thu Dec 8 16:07:07 CET 2005 Daniel Veillard <veillard@redhat.com>
* configure.in include/libvir.h.in include/libvir.h src/Makefile.am
include/Makefile.am: provide/fix library versionning information
include/libvir.h is now generated !
* include/libvir.h.in src/libvir.c: revamp APIs and implement
complete ones.
* src/virsh.c: finish the version command and a bit of cleanup.
2005-12-08 14:22:52 +00:00
Thu Dec 8 15:20:57 CET 2005 Karel Zak <kzak@redhat.com>
2005-12-08 14:22:52 +00:00
* src/virsh.c: code cleanup to prevent gcc warnings
Thu Dec 8 14:25:09 CET 2005 Daniel Veillard <veillard@redhat.com>
* configure.in: activate pedantic flags
* src/libvir.c src/libvir_sym.version src/xen_internal.[ch]
include/libvir.h: implementing hypervisor Version and Type interfaces
* src/virsh.c: adding a version command, WIP
2005-12-08 10:23:34 +00:00
Thu Dec 8 11:19:48 CET 2005 Karel Zak <kzak@redhat.com>
2005-12-08 10:23:34 +00:00
* src/Makefile.am src/virsh.c configure.in: adding readline support,
and implement basic commands to virsh.
Thu Dec 8 11:12:36 CET 2005 Daniel Veillard <veillard@redhat.com>
* src/libvir.c src/xen_internal.c: fixed the new Xen hypervisor call
Wed Dec 7 19:09:48 CET 2005 Daniel Veillard <veillard@redhat.com>
* configure.in src/Makefile.am src/libvir.c src/xen_internal.c
src/xen_internal.h: removed dependancy on xenctrl library, untested
yet.
Wed Dec 7 15:08:54 CET 2005 Daniel Veillard <veillard@redhat.com>
* docs/*: adding missing links to API page.
Wed Dec 7 14:43:28 CET 2005 Daniel Veillard <veillard@redhat.com>
* configure.in libvir.spec.in docs/Makefile.am: make sure the
docs are installed and packaged in the -devel RPM
* docs/api.xsl docs/newapi.xsl: forgot to commit API HTML stylesheets
2005-12-07 13:14:45 +00:00
Wed Dec 7 14:09:48 CET 2005 Karel Zak <kzak@redhat.com>
* include/libvir.h src/libvir.c: adding xenConnectNumOfDomains()
to returns number of active domains.
Wed Dec 7 13:55:04 CET 2005 Daniel Veillard <veillard@redhat.com>
* docs/ChangeLog.awk docs/ChangeLog.xsl: Changelog handling from
libxml2 adapted to libvir
* docs/* docs/html/libxml-libvir.html: regenerated
Wed Dec 7 11:58:20 CET 2005 Daniel Veillard <veillard@redhat.com>
* docs/* docs/html/*: more work on the docs generation
* include/libvir.h: adding informations on the header
Wed Dec 7 10:31:29 CET 2005 Daniel Veillard <veillard@redhat.com>
* configure.in docs/FAQ.html docs/Libxml2-Logo-90x34.gif
docs/Makefile.am docs/bugs.html docs/index.html docs/intro.html
docs/libvir.html docs/redhat.gif docs/site.xsl: starting to add
the web site, based on libxml2 one.
* src/hash.c: add a missing include
Tue Dec 6 17:47:11 CET 2005 Daniel Veillard <veillard@redhat.com>
* docs/Makefile.am docs/apibuild.py docs/libvir-api.xml
docs/libvir-refs.xml: fix XML API generation
* include/libvir.h src/libvir.c src/virsh.c: fix the info memory
API again, use KB, not bytes so that an unsigned long is sufficient.
Tue Dec 6 17:12:52 CET 2005 Daniel Veillard <veillard@redhat.com>
* include/libvir.h src/libvir.c src/virsh.c: adding the extraction
of the number of virtual CPUs for both interfaces.
Tue Dec 6 14:46:50 CET 2005 Daniel Veillard <veillard@redhat.com>
* include/libvir.h src/libvir.c src/virsh.c: tweaking of the
GetInfo() API, returns bytes and nanoseconds, try to fix
the scales, but time on unpriviledged interfaces doesn't work.
Mon Dec 5 19:14:05 CET 2005 Daniel Veillard <veillard@redhat.com>
* include/libvir.h src/libvir.c src/libvir_sym.version src/virsh.c:
first pass at trying to implement virDomainGetInfo() quite a bit
of work left to do.
Mon Dec 5 12:15:16 CET 2005 Daniel Veillard <veillard@redhat.com>
* Makefile.am README TODO autogen.sh configure.in libvir.pc.in
libvir.spec.in docs/Makefile.am docs/apibuild.py docs/structures.fig
include/Makefile.am include/libvir.h src/Makefile.am src/hash.c
src/hash.h src/internal.h src/libvir.c src/libvir_sym.version
src/virsh.c: renamed to libvir
Fri Dec 2 15:15:26 CET 2005 Daniel Veillard <veillard@redhat.com>
* include/libxen.h src/libxen.c src/libxen_sym.version: adding
xenConnectListDomains() to list active domains
* src/xensh.c: integrated a basic test for xenConnectListDomains()
Fri Dec 2 13:10:04 CET 2005 Daniel Veillard <veillard@redhat.com>
* configure.in src/Makefile.am: more warnings from compiler and
link static in work environement
Thu Dec 1 18:32:43 CET 2005 Daniel Veillard <veillard@redhat.com>
* Makefile.am configure.in docs/apibuild.py docs/libxen-api.xml
docs/libxen-refs.xml docs/structures.fig: starting to add docs
and the extraction tool
* src/libxen.c: fixed comments error raised by apibuild
Thu Dec 1 17:34:23 CET 2005 Daniel Veillard <veillard@redhat.com>
* include/libxen.h src/libxen.c src/libxen_sym.version: add read-only
connections for normal users (but need /var/run/xenstored/socket_ro
to be chmoded to 666)
* src/xensh.c: if not root use the RO access
Thu Dec 1 11:50:16 CET 2005 Daniel Veillard <veillard@redhat.com>
* include/libxen.h src/libxen.c src/libxen_sym.version src/xensh.c:
changed entry points naming conventions based on feedback with
Karel Zak
Wed Nov 30 14:18:19 CET 2005 Daniel Veillard <veillard@redhat.com>
* src/Makefile.am src/hash.[ch]: added hash module based on libxml2
one.
* include/libxen.h src/libxen.c src/libxen_sym.version: extend API
start to access libxenctrl directly (need xen update to get includes)
* src/xensh.c: access to both xenstore and hypervisor
Tue Nov 22 17:09:11 CET 2005 Daniel Veillard <veillard@redhat.com>
* configure.in: checking xenstore library, error out on missing libs
* include/libxen.h src/libxen.c src/libxen_sym.version: adding new
entry points
Thu Nov 10 17:11:03 CET 2005 Daniel Veillard <veillard@redhat.com>
* src/makefile.am src/libxen.c src/xensh.c: add a small tool sensh,
implement xenopenconnect and xencloseconnect.
Wed Nov 9 10:57:12 CET 2005 Daniel Veillard <veillard@redhat.com>
* docs/Goals: added a Goals document for the library
Mon Nov 7 18:14:50 CET 2005 Daniel Veillard <veillard@redhat.com>
* TODO: updated
* include/libxen.h src/libxen.c src/libxen_sym.version: extended
entry points to a first minimal set.
* src/internal.h: TODO macro
Wed Nov 2 16:35:54 CET 2005 Daniel Veillard <veillard@redhat.com>
* TODO libxen.pc.in libxen.spec.in include/Makefile.am Makefile.am
config.h.in configure.in: fix make dist, add rpm packaging
* src/libxen_sym.version src/Makefile.am: set a policy of no
export by default of library symbols
Wed Nov 2 14:17:50 CET 2005 Daniel Veillard <veillard@redhat.com>
* AUTHORS NEWS README autogen.sh configure.in: allow autogen.sh and
configure to start working
* src/Makefile.am src/internal.h src/libxen.c: make the first compile
2005-11-02 12:50:21 +00:00
Wed Nov 2 13:44:47 CET 2005 Daniel Veillard <veillard@redhat.com>
* src/libxen.c src/Makefile.am include/libxen.h configure.in
Makefile.am COPYING.LIB: creation