virt-host-validate should print "Checking for device assignment IOMMU
support" for all architectures, not only for Intel / AMD.
This is the output without the patch:
```
[fidencio@dentola libvirt]$ virt-host-validate
QEMU: comprobando if device /dev/kvm exists : PASA
QEMU: comprobando if device /dev/kvm is accessible : PASA
QEMU: comprobando if device /dev/vhost-net exists : PASA
QEMU: comprobando if device /dev/net/tun exists : PASA
QEMU: comprobando for cgroup 'cpu' controller support : PASA
QEMU: comprobando for cgroup 'cpuacct' controller support : PASA
QEMU: comprobando for cgroup 'cpuset' controller support : PASA
QEMU: comprobando for cgroup 'memory' controller support : PASA
QEMU: comprobando for cgroup 'devices' controller support : ADVERTENCIA (Enable 'devices' in kernel Kconfig file or mount/enable cgroup controller in your system)
QEMU: comprobando for cgroup 'blkio' controller support : PASA
ADVERTENCIA (Unknown if this platform has IOMMU support)
QEMU: comprobando for secure guest support : ADVERTENCIA (Unknown if this platform has Secure Guest support)
```
This is the output with the patch:
```
[fidencio@dentola libvirt]$ ./build/tools/virt-host-validate
QEMU: Checking if device /dev/kvm exists : PASS
QEMU: Checking if device /dev/kvm is accessible : PASS
QEMU: Checking if device /dev/vhost-net exists : PASS
QEMU: Checking if device /dev/net/tun exists : PASS
QEMU: Checking for cgroup 'cpu' controller support : PASS
QEMU: Checking for cgroup 'cpuacct' controller support : PASS
QEMU: Checking for cgroup 'cpuset' controller support : PASS
QEMU: Checking for cgroup 'memory' controller support : PASS
QEMU: Checking for cgroup 'devices' controller support : WARN (Enable 'devices' in kernel Kconfig file or mount/enable cgroup controller in your system)
QEMU: Checking for cgroup 'blkio' controller support : PASS
QEMU: Checking for device assignment IOMMU support : WARN (Unknown if this platform has IOMMU support)
QEMU: Checking for secure guest support : WARN (Unknown if this platform has Secure Guest support)
```
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Previous patches rendered 'return 0' at the end of the function a
dead code. Therefore, the code can be rearranged a bit and the
line can be dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
Ideally, every virHostMsgFail() would be coupled with
VIR_HOST_VALIDATE_FAILURE() so that the failure is correctly
propagated to the caller. However, in
virHostValidateSecureGuests() we are either ignoring @level and
returning 0 directly (no error), or not returning at all, relying
on 'return 0' at the end of the function. Neither of these help
propagate failure correctly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
When validating secure guests support on s390(x) we may read
/proc/cmdline and look for "prot_virt" argument. Reading the
kernel command line is done via virFileReadValueString() which
may fail. In such case caller won't see any error message. But we
can produce the same warning/error as if "prot_virt" argument
wasn't found. Not only this lets users know about the problem,
it also terminates the "Checking for ...." line correctly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
As a part of its checks, virt-host-validate calls virCgroupNew()
to detect CGroup controllers which are then printed out. However,
virCgroupNew() can fail (with appropriate error message set).
Let's print an error onto stderr if that happens.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
Several libvirt functions are called from virt-host-validate.
Some of these functions do report an error on failure. But
reporting an error is coupled with freeing previous error (by
calling virResetError()). But we've never called
virErrorInitialize() and thus resetting error object frees some
random pointer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Fabiano Fidêncio <fabiano@fidencio.org>
Currently `virt-host-validate` will fail whenever one of its calls fail,
regardless of virHostValidateLevel set.
This behaviour is not optimal and makes it not exactly reliable as a
command line tool as other tools or scripts using it would have to check
its output to figure out whether something really failed or if a warning
was mistakenly treated as failure.
With this change, the behaviour of whether to fail or not, is defined by
the caller of those functions, based on the virHostValidateLevel passed
to them.
https://gitlab.com/libvirt/libvirt/-/issues/175
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Some of our really old APIs are missing @flags argument. We
introduced their variants with "Flags" suffix and wired some
logic into virsh to call the new variant only if necessary. This
enables virsh to talk to older daemon which may be lacking new
APIs.
However, in case of cmdSetmem() we are talking about v0.1.1
(virDomainSetMemory()) vs. v0.9.0 (virDomainSetMemoryFlags()) and
in case of cmdSetmaxmem() we are talking about v0.0.3
(virDomainSetMaxMemory()) vs v0.9.0 (virDomainSetMemoryFlags()).
Libvirt v0.9.0 was released more than 10 years ago and recently
we dropped support for RHEL-7 which has v4.5.0 (released ~3 years
ago). Thus it is not really necessary to have support in virsh
for such old daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
None of them are currently needed to pass our upstream CI, most were
either for ancient clang versions or coverity for silencing false
positives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
They were added mostly randomly and we don't really want to keep working
around of false positives.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In previous commit the virDomainCoreDumpWithFormat() API gained
new format. Expose it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These functions initialize @ret to true and only after something
fails either they call cleanup code (which consists only from
virshDomainFree()) and return false, or they set ret = false and
carry on (when the failure occurred close to cleanup code).
Switch them to the usual pattern in which ret is initialized to
failure, goto cleanup is used and ret is set to true only after
everything succeeded.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In my commit of v7.1.0-rc1~376 I've simplified the logic of
handling @flags. My assumption back then was that calling
virDomainSetMemory() is equivalent to
virDomainSetMemoryFlags(flags = 0). But that is not the case,
because it is equivalent to virDomainSetMemoryFlags(flags =
VIR_DOMAIN_AFFECT_LIVE). Fix the condition that calls the old
API.
Fixes: b5e267e8c5
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1961118
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The current setup uses a single script that is symlinked twice
and that tries to configure bash completion for both virsh and
virt-admin, even if only one of them is installed. This also
forces us to have a -bash-completion RPM package that only
contains the tiny shared file.
Rework bash completion support so that two scripts are
generated, each one tailored to a specific command.
Since the shared script no longer exists after this change,
the corresponding RPM package becomes empty.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Our vsh bash completion string is merely just a wrapper over
virsh/virt-admin complete (cmdComplete) - a hidden command that
uses internal readline completion to generate list of candidates.
But this means that we have to pass some additional arguments to
the helper process: e.g. connection URI and R/O flag.
Candidates are printed on a separate line each (and can contain
space), which means that when bash is reading the helper's output
into an array, it needs to split items on '\n' char - hence the
IFS=$'\n' prefix on the line executing the helper. This was
introduced in b889594a70.
But this introduced a regression - those extra arguments we might
pass are stored in a string and previously were split on a space
character (because $IFS was kept untouched and by default
contains space). But now, after the fix that's no longer the case
and thus virsh/virt-admin sees ' -r -c URI' as one argument.
The solution is to take $IFS out of the picture by storing the
extra arguments in an array instead of string.
Fixes: b889594a70
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The g_path_is_absolute() considers more situations
than just a simply "path[0] == '/'".
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainGetDiskErrors uses the weird semantics where we make the
caller query for the number of elements and then pass pre-allocated
structure.
The cleanup section errorneously used the 'count' variable to free the
allocated elements for the API but 'count' can be '-1' in cases when the
API returns failure, thus attempting to free beyond the end of the
array.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/155
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Commit 95f8e3237e which introduced XML schema validation
for snapshot XMLs always asserted the validation for the XML generated
by 'virsh snapshot-create-as' on the basis that it's libvirt-generated,
thus valid.
This unfortunately isn't true as users can influence certain bits of the
XML such as the disk image path which must be a full path. Thus if a
user tries to invoke virsh as:
$ virsh snapshot-create-as upstream --diskspec vda,file=relative.qcow2
error: XML document failed to validate against schema: Unable to validate doc against /path/to/domainsnapshot.rng
Extra element disks in interleave
Element domainsnapshot failed to validate content
They get a rather useless error from the libxml2 RNG validator.
With this fix applied, we get to the XML parser in libvirtd which has a
more reasonable error:
$ virsh snapshot-create-as upstream --diskspec vda,file=relative.qcow2
error: XML error: disk snapshot image path 'relative.qcow2' must be absolute
Instead users can force validation of the XML generated by 'virsh
snapshot-create-as' by passing the '--validate' flag.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Historically, we declared pointer type to our types:
typedef struct _virXXX virXXX;
typedef virXXX *virXXXPtr;
But usefulness of such declaration is questionable, at best.
Unfortunately, we can't drop every such declaration - we have to
carry some over, because they are part of public API (e.g.
virDomainPtr). But for internal types - we can do drop them and
use what every other C project uses 'virXXX *'.
This change was generated by a very ugly shell script that
generated sed script which was then called over each file in the
repository. For the shell script refer to the cover letter:
https://listman.redhat.com/archives/libvir-list/2021-March/msg00537.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use g_auto for the string list and remove 'ret' and 'cleanup'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Follow best practices and add a unsigned int flags parameter to these
new APIs that have not been in a release yet.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
One of the error branches used a plain free where vshCommandFree
was required.
https://bugzilla.redhat.com/show_bug.cgi?id=1943415
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
This virsh command maps to virNodeDeviceCreate(), which starts a node
device that has been previously defined by virNodeDeviceDefineXML().
This is only supported for mediated devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add a virsh command that maps to virNodeDeviceUndefine().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Several functions accept providing a node device by name or by wwnn,wwpn
pair. Extract the logic to do this into a function that can be used by
both callers.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add a virsh command that maps to virNodeDeviceDefineXML().
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Now that we can filter active and inactive node devices in
virConnectListAllNodeDevices(), add these switches to the virsh command.
Eventual output (once everything is hooked up):
virsh # nodedev-list --cap mdev
mdev_bd2ea955_3402_4252_8c17_7468083a0f26
virsh # nodedev-list --inactive --cap mdev
mdev_07d8b8b0_7e04_4c0f_97ed_9214ce12723c
mdev_927c040f_ae7d_4a35_966e_286ba6ebbe1c
virsh # nodedev-list --all --cap mdev
mdev_07d8b8b0_7e04_4c0f_97ed_9214ce12723c
mdev_927c040f_ae7d_4a35_966e_286ba6ebbe1c
mdev_bd2ea955_3402_4252_8c17_7468083a0f26
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Since a mediated device can be persistently defined by the mdevctl
backend, we need additional lifecycle events beyond CREATED/DELETED to
indicate that e.g. the device has been stopped but the device definition
still exists.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Generated by the following spatch:
@@
expression a, b;
@@
+ b = g_steal_pointer(&a);
- b = a;
... when != a
- a = NULL;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduce command 'virsh domstats --dirtyrate' for reporting memory
dirty rate information. The info is listed as:
Domain: 'vm0'
dirtyrate.calc_status=2
dirtyrate.calc_start_time=1534523
dirtyrate.calc_period=1
dirtyrate.megabytes_per_second=5
Signed-off-by: Hao Wang <wanghao232@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tools depend on keycode generated sources, so declare that as an
explicit dependency, otherwise it might fail with:
../tools/virsh-completer-domain.c:35:10: fatal error: 'virkeynametable_linux.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: b0f4cf25a6
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
These functions are identical. Made using this spatch:
@@
expression path, mode;
@@
- virFileMakePathWithMode(path, mode)
+ g_mkdir_with_parents(path, mode)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a wrapper that will handle the out of memory condition by abort()
and also prevents callers from having to typecast the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>