Commit Graph

891 Commits

Author SHA1 Message Date
Eric Blake
a27031c408 snapshot: Define explicit flags for snapshot xml
Commit f609cb85 (0.9.5) introduced virDomainSnapshotGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid.  Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the snapshot documentation to declare it as invalid.
However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; esx and vbox don't support flags;
qemu, test, and vz only support VIR_DOMAIN_XML_SECURE), and it is
unlikely that the domain state saved off during a snapshot creation
needs to be migration-friendly (as the snapshot is not the source of
a migration), it is easier to just define an explicit set of supported
flags directly related to the snapshot API rather than trying to
borrow from domain API, and risking confusion if even more domain
flags are added later (in fact, I have an upcoming patch that plans to
add a new flag to virDomainGetXMLDesc that makes no sense for
snapshots).

There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the reused name).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-19 21:34:42 -06:00
Eric Blake
12a51f372a domain: Define explicit flags for saved image xml
Commit d2a929d4 (0.9.4) defined virDomainSaveImageGetXMLDesc()'s use
of @flags as a subset of virDomainXMLFlags, documenting that 2 of the
3 flags defined at the time would never be valid.  Later, commit
28f8dfdc (1.0.0) introduced a new flag, VIR_DOMAIN_XML_MIGRATABLE, but
did not adjust the save image documentation to declare it as invalid.
Later, commit a67e3872 (3.7.0) blindly copied and pasted the same text
into virDomainManagedSaveGetXMLDesc.

However, since the flag is not accepted as valid by any of the
drivers (remote is just passthrough; and qemu is the only supporting
driver for either API, with support for just VIR_DOMAIN_XML_SECURE),
it is easier to just define an explicit set of supported flags
directly related to the save image API rather than trying to borrow
from live domain API, and risking confusion if even more domain flags
are added later (in fact, I have an upcoming patch that plans to add
a new flag to virDomainGetXMLDesc that makes no sense for saved
images).  We may someday decide that saved images need to support the
_MIGRATABLE flag, as it is possible to load a saved image with a
different version of libvirt than the one that created it, but that
can be a separate patch if it is ever needed.  Meanwhile, it DOES make
sense to reuse the same flags for SaveImage and for ManagedSave (since
ManagedSave is really just sugar for creating a normal SaveImage in a
location controlled by libvirt instead of by the user).

There is no API or ABI impact (since we purposefully used unsigned int
rather than an enum type in public API, and since the new flag name
carries the same value as the old reused name).

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-19 21:34:42 -06:00
Jiri Denemark
cdc1b1d71b Public API for post-copy migration bandwidth
This patch adds a new VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY typed
parameter for virDomainMigrate3 and virDomainMigrateToURI3 for setting
maximum post-copy migration bandwidth.

In case the initial VIR_MIGRATE_PARAM_BANDWIDTH_POSTCOPY value turns out
to be suboptimal a new VIR_DOMAIN_MIGRATE_MAX_SPEED_POSTCOPY flag for
virDomainMigrateSetMaxSpeed and virDomainMigrateGetMaxSpeed may be used
to set/get the maximum post-copy migration bandwidth while migration is
already running.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-02-07 16:25:59 +01:00
Laine Stump
d8393b56e2 util: move all firewalld-specific stuff into its own files
In preparation for adding several other firewalld-specific functions,
separate the code that's unique to firewalld from the more-generic
"firewall" file.

Signed-off-by: Laine Stump <laine@laine.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-02-01 12:08:37 -05:00
Peter Krempa
3355edd6f0 lib: Fix docs generated for enum virDomainBlockJobType
Mixing documentation strings trailing the enum value and preceeding the
enum value ends in a big mixup. Fix docs string for
VIR_DOMAIN_BLOCK_JOB_TYPE_UNKNOWN so that it's not squished together
with the next one.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-01-29 13:41:16 +01:00
Michal Privoznik
29682196d8 Drop UML driver
The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-17 17:52:46 +01:00
Jiri Denemark
3f4914e03c qemu: Add support for postcopy-requests migration statistics
QEMU can report how many times during post-copy migration the domain
running on the destination host tried to access a page which has not
been migrated yet.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-17 16:16:30 +01:00
Peter Krempa
590cc60de5 include: error: Add enum sentinel for virErrorNumber enum
We do have one for the error domain but not for the error number itself.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2018-12-14 13:28:43 +01:00
Daniel P. Berrangé
568a417224 Enforce a standard header file guard symbol name
Require that all headers are guarded by a symbol named

  LIBVIRT_$FILENAME

where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.

Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-14 10:47:13 +00:00
Daniel P. Berrangé
600462834f Remove all Author(s): lines from source file headers
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.

In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.

With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to  find the
author of a particular bit of code.

This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.

The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-13 16:08:38 +00:00
Yuri Chornoivan
e5c1fbca24 Fix minor typos in messages and docs
Signed-off-by: Yuri Chornoivan <yurchor@ukr.net>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-12-05 10:39:54 +01:00
John Ferlan
ae69bda5c2 lib: Introduce virDomainSetIOThreadParams
Create a new API that will allow an adjustment of IOThread
polling parameters for the specified IOThread. These parameters
will not be saved in the guest XML. Currently the only parameters
supported will allow the hypervisor to adjust the parameters used
to limit and alter the scope of the polling interval. The polling
interval allows the IOThread to spend more or less time processing
in the guest.

Based on code originally posted by Pavel Hrdina <phrdina@redhat.com>
to add virDomainAddIOThreadParams and virDomainModIOThreadParams.
Modification of those changes to use virDomainSetIOThreadParams
instead and remove concepts related to saving the data in guest
XML as well as the way to specifically enable the polling parameters.

Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2018-11-19 07:26:40 -05:00
John Ferlan
d1eac92784 qemu: Implement the ability to return IOThread stats
Process the IOThreads polling stats if available. Generate the
output params record to be returned to the caller with the three
values - poll-max-ns, poll-grow, and poll-shrink.

Signed-off-by: John Ferlan <jferlan@redhat.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2018-11-19 07:26:40 -05:00
Nikolay Shirokovskiy
66a85cb136 libvirt: add daemon itself as shutdown reason
This patch introduces a new shutdown reason "daemon" in order
to indicate that the daemon needed to force shutdown the domain
as the best course of action to take at the moment.

This action would occur during reconnection when processing
encounters an error once the monitor reconnection is successful.

Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2018-11-14 06:52:23 -05:00
Tomáš Golembiovský
aee0465508 qemu: Add entry for balloon stat stat-disk-caches
QEMU commit bf1e7140e adds reporting of new balloon statistic to QEMU
2.12. Value represents the amount of memory that can be quickly
reclaimed without additional I/O. Let's add that too.

Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-07-16 17:42:23 -04:00
Daniel P. Berrangé
b57a9aecaf nwfilter: export port binding concept in the public API
When the daemons are split there will need to be a way for the virt
drivers and/or network driver to create and delete bindings between
network ports and network filters. This defines a set of public APIs
that are suitable for managing this facility.

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-06-26 11:22:07 +01:00
Eric Blake
0ec6343a06 snapshots: Clarify comments on snapshot role
Give some more details on what a snapshot is good for, to make
it easier to distinguish from the role of upcoming additions for
incremental backups.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-06-25 20:22:28 -05:00
Michal Privoznik
0afbeb3740 Introduce VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT
https://bugzilla.redhat.com/show_bug.cgi?id=1552092

If there's a long running job it might cause us to wait 30
seconds before we give up acquiring the job. This is problematic
to interactive applications that fetch stats repeatedly every few
seconds.

The solution is to introduce
VIR_CONNECT_GET_ALL_DOMAINS_STATS_NOWAIT flag which tries to
acquire job but does not wait if acquiring failed.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-06-19 07:08:13 +02:00
Brijesh Singh
077c9a2504 libvirt: Introduce virDomainGetLaunchSecurityInfo public API
The API can be used outside the libvirt to get the launch security
information. When SEV is enabled, the API can be used to get the
measurement of the launch process.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2018-06-12 10:00:49 +02:00
Brijesh Singh
45422935c3 libvirt: Introduce virNodeGetSEVInfo public API
The API can be used by application to retrieve the Platform Diffie-Hellman
Key and Platform Certificate chain.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2018-06-12 09:52:00 +02:00
ramyelkest
50e96bb2a1 util: virerror: Introduce virGetLastError{Code,Domain} public APIs
Many places in the code call virGetLastError() just to check the
raised error code, or domain. However virGetLastError() can return
NULL, so the code has to check for that first. This patch therefore
introduces virGetLasError{Code,Domain} functions which always return a
valid error code or domain respectively, thus dropping the need to
perform any checks on the error object.

Signed-off-by: Ramy Elkest <ramyelkest@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
2018-06-05 18:44:05 +02:00
Jiri Denemark
7d0a1efcd6 Introduce virConnectBaselineHypervisorCPU public API
The new API computes the most feature-rich CPU which is compatible with
all given CPUs and can be provided by the specified hypervisor. It is a
more useful version of virConnectBaselineCPU, which doesn't consider any
hypervisor capabilities when computing the best CPU.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
2018-05-28 15:58:05 +02:00
Jiri Denemark
24a41aa643 Introduce virConnectCompareHypervisorCPU public API
This new API compares the given CPU description with the CPU the
specified hypervisor is able to provide on the host. It is a more useful
version of virConnectCompareCPU, which compares the CPU definition with
the host CPU without considering any specific hypervisor and its
abilities.

https://bugzilla.redhat.com/show_bug.cgi?id=1559832
https://bugzilla.redhat.com/show_bug.cgi?id=1559835

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
2018-05-28 15:55:17 +02:00
Michal Privoznik
007f500a23 Introduce virDomainDetachDeviceAlias API
When detaching a device it can be uniquely identified by its
alias. Instead of misusing virDomainDetachDeviceFlags which has
the same signature introduce new function.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-05-28 13:08:38 +02:00
Eric Blake
65dd2ac92d maint: typo fix in VIR_MIGRATE_PARAM_URI
s/filed/field/

Signed-off-by: Eric Blake <eblake@redhat.com>
2018-05-11 15:34:23 -05:00
Chen Hanxiao
e24d4c9051 qemu: introduce qemuARPGetInterfaces to get IP from host's arp table
introduce VIR_DOMAIN_INTERFACE_ADDRESSES_SRC_ARP to get ip address
of VM from the message of netlink RTM_GETNEIGH

Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-03-15 11:22:42 +01:00
Andrea Bolognani
ea9b0e580a keycodemapdb: Update submodule
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-12 16:30:49 +01:00
Daniel P. Berrangé
7aa0e8c0cb storage: export virStoragePoolLookupByTargetPath as a public API
The storagePoolLookupByTargetPath() method in the storage driver is used
by the QEMU driver during block migration. If there's a valid use case
for this in the QEMU driver, then external apps likely have similar
needs. Exposing it in the public API removes the direct dependancy from
the QEMU driver to the storage driver.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-02-09 11:05:10 +00:00
Chen Hanxiao
bb189c8e8c qemu: Introduce VIR_ERR_DEVICE_MISSING
Add new error code to be able to allow consumers (such as Nova) to be
able to key of a specific error code rather than needing to search the
error message."

Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-02-01 07:17:01 -05:00
Chen Hanxiao
c416a20db1 virerror: mark VIR_ERR_AGENT_UNSYNCED as DEPRECATED
Since commit 5e5019bf, we've no longer use
VIR_ERR_AGENT_UNSYNCED anymore.
Mark it as DEPRECATED.

Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-12-07 14:30:20 +01:00
Pavel Hrdina
1a2f34e363 lib: introduce virDomainSetLifecycleAction() API
Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2017-10-19 11:52:26 +02:00
Erik Skultety
b08017ca54 maint: Replace tabs with spaces in all source files in repo
So we have a syntax-check rule to catch all tab indents but it naturally
can't catch tab spacing, i.e. as a delimiter. This patch is a result of
running 'vim -en +retab +wq'
(using tabstop=8 softtabstop=4 shiftwidth=4 expandtab) on each file from
a list generated by the following:
find . -regextype gnu-awk \
         -regex ".*\.(rng|syms|html|s?[ch]|py|pl|php(\.code)?)(\.in)?" \
         | xargs git grep -lP "\t"

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2017-10-18 13:25:10 +02:00
Michal Privoznik
0d3d020ba6 virDomainInterfaceStats: Accept MAC address too
https://bugzilla.redhat.com/show_bug.cgi?id=1497396

The other APIs accept both, ifname and MAC address. There's no
reason virDomainInterfaceStats can't do the same.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2017-10-13 13:46:59 -07:00
Chao Fan
79b7ac43fa qemu: add the print of page size in cmd domjobinfo
The command "info migrate" of qemu outputs the dirty-pages-rate during
migration, but page size is different in different architectures. So
page size should be output to calculate dirty pages in bytes.

Page size is already implemented with commit
030ce1f8612215fcbe9d353dfeaeb2937f8e3f94 in qemu.
Now Implement the counter-part in libvirt.

Signed-off-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-10-12 17:06:07 +02:00
Julio Faracco
b06521928c storage: Add new events for *PoolBuild() and *PoolDelete().
This commit adds new events for two methods and operations: *PoolBuild() and
*PoolDelete(). Using the event-test and the commands set below we have the
following outputs:

$ sudo ./event-test
Registering event callbacks
myStoragePoolEventCallback EVENT: Storage pool test Defined 0
myStoragePoolEventCallback EVENT: Storage pool test Created 0
myStoragePoolEventCallback EVENT: Storage pool test Started 0
myStoragePoolEventCallback EVENT: Storage pool test Stopped 0
myStoragePoolEventCallback EVENT: Storage pool test Deleted 0
myStoragePoolEventCallback EVENT: Storage pool test Undefined 0

Another terminal:
$ sudo virsh pool-define test.xml
Pool test defined from test.xml

$ sudo virsh pool-build test
Pool test built

$ sudo virsh pool-start test
Pool test started

$ sudo virsh pool-destroy test
Pool test destroyed

$ sudo virsh pool-delete test
Pool test deleted

$ sudo virsh pool-undefine test
Pool test has been undefined

This commits can be a solution for RHBZ #1475227.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1475227

Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-09-20 11:52:56 +02:00
Kothapally Madhu Pavan
1558f2584f lib: Add API to edit domain's managed save state xml configuration
Similar to domainSaveImageDefineXML this commit adds domainManagedSaveDefineXML
API which allows to edit domain's managed save state xml configuration.

Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
2017-08-29 13:40:13 +02:00
Kothapally Madhu Pavan
a67e3872a6 lib: Add API to dump xml configuration of managed save state domain
Similar to domainSaveImageGetXMLDesc this commit adds domainManagedSaveGetXMLDesc
API which allows to get the xml of managed save state domain.

Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
2017-08-29 13:40:13 +02:00
Scott Garfinkle
4601a546b7 Add virDomainMigrateGetMaxDowntime public API
Add virDomainMigrateGetMaxDowntime to support querying maximum allowable
downtime during live migration.
2017-08-26 07:55:17 -04:00
Martin Kletzander
af4270400a Move resctrl-related code from conf/capabilities to util/virresctrl
It doesn't access anything from conf/ and ti will be needed to use
from other util/ places.  This split makes the separation clearer.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2017-08-14 10:01:12 +02:00
Michal Privoznik
f4cb85c6af libvirt-domain.h: Fix enum description placement
There are only two acceptable places for describing enum values.
It's either:

    typedef enum {
        /* Some long description. Therefore it's placed before
         * the value. */
        VIR_ENUM_A_VAL = 1,
    } virEnumA;

or:

    typedef enum {
        VIR_ENUM_B_VAL = 1, /* Some short description */
    } virEnumB;

However, during review of a patch sent upstream I realized that
is not always the case. I went through all the public header
files and identified all the offenders. Luckily there were just
two of them.

Yes, this makes our HTML generated documentation broken, but
that's bug of the generator. Our header files shouldn't be forced
to use something we don't want to.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-07-21 12:46:18 +02:00
Chen Hanxiao
84359339c5 include: nodedev: Fix a misleading comment about the used callback
Actually we use virConnectNodeDeviceEventGenericCallback.

Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
2017-07-20 13:21:54 +02:00
Michal Privoznik
5b16a499f8 virStream*All: Report error if a callback fails
All of these four functions (virStreamRecvAll, virStreamSendAll,
virStreamSparseRecvAll, virStreamSparseSendAll) take one or more
callback functions that handle various aspects of streams.
However, if any of them fails no error is reported therefore
caller does not know what went wrong.

At the same time, we silently presumed callbacks to set errno on
failure. With this change we should document it explicitly as the
error is not properly reported.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2017-07-11 09:33:12 +02:00
Peter Krempa
b7e534c651 qemu: Conditionally allow block-copy for persistent domains
Allow starting the block-copy job for a persistent domain if a user
declares by using a flag that the job will not be recovered if the VM is
switched off while the job is active.

This allows to use the block-copy job with persistent VMs under the same
conditions as would apply to transient domains.
2017-06-07 13:13:22 +02:00
Bjoern Walk
c7cfcc57d5 virsh: nodedev: ability to filter CCW capabilities
Now that the node_device driver is aware of CCW devices, let's hook up
virsh so that we can filter them properly.

Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
2017-05-26 10:44:05 -04:00
Martin Kletzander
a8eba5036c qemu: Report shutdown event details
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host.  We should
forward that information along, at least for shutdown events.  Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used.  It can be added later on.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2017-05-26 15:01:15 +02:00
Erik Skultety
4385df97fe nodedev: Introduce new mdev_types and mdev nodedev capabilities
The reason for introducing two capabilities, one for the device itself
(cap 'mdev') and one for the parent device listing the available types
('mdev_types'), is that we should be able to do
'virsh nodedev-list --cap' not only for existing mdev devices but also
for devices that support creation of mdev devices, since one day libvirt
might be actually able to create the mdev devices in an automated way
(just like we do for NPIV/vHBA).

https://bugzilla.redhat.com/show_bug.cgi?id=1452072

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2017-05-18 12:20:15 +02:00
Michal Privoznik
1f43aa67c5 Introduce virStorageVol{Download,Upload}Flags
These flags to APIs will tell if caller wants to use sparse
stream for storage transfer. At the same time, it's safe to
enable them in storage driver frontend and rely on our backends
checking the flags. This way we can enable specific flags only on
some specific backends, e.g. enable
VIR_STORAGE_VOL_DOWNLOAD_SPARSE_STREAM for filesystem backend but
not iSCSI backend.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
Michal Privoznik
a524951091 Introduce virStreamSparseSendAll
This is just a wrapper over new function that have been just
introduced: virStreamSendHole() . It's very similar to
virStreamSendAll() except it handles sparse streams well.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
Michal Privoznik
3a1e2e920e Introduce virStreamSparseRecvAll
This is just a wrapper over new functions that have been just
introduced: virStreamRecvFlags(), virStreamRecvHole(). It's very
similar to virStreamRecvAll() except it handles sparse streams
well.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
Michal Privoznik
87e4a842b7 Introduce VIR_STREAM_RECV_STOP_AT_HOLE flag
Add a new flag to virStreamRecvFlags in order to handle being able to
stop reading from the stream so that the consumer can generate a "hole"
in stream target. Generation of a hole replaces the need to receive and
handle a sequence of zero bytes for sparse stream targets.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
Michal Privoznik
b6aedd2f05 Introduce virStreamRecvHole
This function is basically a counterpart for virStreamSendHole().
If one side of a stream called virStreamSendHole() the other
should call virStreamRecvHole() to get the size of the hole.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
Michal Privoznik
69a573d010 Introduce virStreamSendHole
This API is used to tell the other side of the stream to skip
some bytes in the stream. This can be used to create a sparse
file on the receiving side of a stream.

It takes @length argument, which says how big the hole is. This
skipping is done from the current point of stream. Since our
streams are not rewindable like regular files, we don't need
@whence argument like seek(2) has.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
Michal Privoznik
a35e2836b3 Introduce virStreamRecvFlags
This patch is adding the virStreamRecvFlags as a variant to the
virStreamRecv function in order to allow for future expansion of
functionality for processing sparse streams using a @flags
argument.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-05-18 07:42:13 +02:00
Jiri Denemark
b1c79d785f Add VIR_DOMAIN_JOB_OPERATION typed parameter
The parameter is reported by virDomainGetJobStats API and
VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event and it can be used to identify
the operation (migration, snapshot, ...) to which the reported
statistics belong.

https://bugzilla.redhat.com/show_bug.cgi?id=1441563

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2017-04-27 15:06:40 +02:00
Peter Krempa
bb09798fbe lib: Add API for setting the threshold size for VIR_DOMAIN_EVENT_ID_BLOCK_THRESHOLD
The new API can be used to configure the threshold when
VIR_DOMAIN_EVENT_ID_BLOCK_THRESHOLD should be fired.
2017-03-27 10:09:49 +02:00
Peter Krempa
085e794a86 lib: Introduce event for tracking disk backing file write threshold
When using thin provisioning, management tools need to resize the disk
in certain cases. To avoid having them to poll disk usage introduce an
event which will be fired when a given offset of the storage is written
by the hypervisor. Together with the API which will be added later, it
will allow registering thresholds for given storage backing volumes and
this event will then notify management if the threshold is exceeded.
2017-03-27 09:29:57 +02:00
John Ferlan
6a8d898de6 Add new migration flag VIR_MIGRATE_TLS
Signed-off-by: John Ferlan <jferlan@redhat.com>
2017-03-25 08:19:49 -04:00
Nitesh Konkar
0265bbeee3 perf: add emulation_faults software perf event support
This patch adds support and documentation
for the emulation_faults perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2017-03-07 13:51:05 -05:00
Nitesh Konkar
6780791f18 perf: add alignment_faults software perf event support
This patch adds support and documentation
for the alignment_faults perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2017-03-07 13:51:05 -05:00
Nitesh Konkar
43a54cedf6 perf: add page_faults_maj software perf event support
This patch adds support and documentation
for the page_faults_maj perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2017-03-07 13:51:05 -05:00
Nitesh Konkar
d216e9ad77 perf: add page_faults_min software perf event support
This patch adds support and documentation
for the page_faults_min perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2017-03-07 13:51:04 -05:00
Nitesh Konkar
8110c6a567 perf: add cpu_migrations software perf event support
This patch adds support and documentation
for the cpu_migrations perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2017-03-07 13:51:04 -05:00
Nitesh Konkar
99cc3dc6a2 perf: add context_switches software perf event support
This patch adds support and documentation
for the context_switches perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2017-03-07 13:51:04 -05:00
Nitesh Konkar
6ef2c7e00f perf: add page_faults software perf event support
This patch adds support and documentation
for the page_faults perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2017-03-07 13:51:04 -05:00
Nitesh Konkar
20dc690865 perf: add task_clock software perf event support
This patch adds support and documentation for
the task_clock perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2017-03-07 13:51:04 -05:00
Nitesh Konkar
f372a862ac perf: add cpu_clock software perf event support
This patch adds support and documentation for
the cpu_clock perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2017-03-07 13:51:04 -05:00
Peter Krempa
8f657259bb lib: Add API for specific vCPU hot(un)plug
Similarly to domainSetGuestVcpus this commit adds API which allows to
modify state of individual vcpus rather than just setting the count.

This allows to enable CPUs in specific guest NUMA nodes to achieve any
necessary configuration.
2017-02-21 15:06:59 +01:00
Michal Privoznik
78c018693b nodedev: Introduce new drm cap
After 7f1bdec5fa our nodedev driver is capable of
determining DRM devices (DRM stands for Direct Render Manager not
Digital rights management). There is still one bit missing
though: virConnectListAllNodeDevices() is capable of listing
either all devices or just those with specified capability. Well,
DRM capability is missing there.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-02-17 16:09:15 +01:00
Olga Krishtal
e590d5301e storage: Introduce Virtuozzo vstorage backend
Added general definitions for vstorage pool backend including
the build options to add --with-storage-vstorage checking.
In order to use vstorage as a backend for a storage pool
vstorage tools (vstorage and vstorage-mount) need to be installed.

Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
2017-01-26 10:43:42 -05:00
Daniel P. Berrange
2d0c4947ab Revert "perf: Add cache_l1d perf event support"
This reverts commit ae16c95f1b.
2017-01-16 16:54:34 +00:00
Nitesh Konkar
ae16c95f1b perf: Add cache_l1d perf event support
This patch adds support and documentation for
a generalized hardware cache event called cache_l1d
perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2017-01-09 18:15:31 -05:00
Daniel P. Berrange
42241208d9 secret: add support for value change events
Emit an event whenever a secret value changes

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-09 16:42:04 +00:00
Daniel P. Berrange
34fd3caabf Introduce secret lifecycle event APIs
Add public APIs to allow applications to watch for define and
undefine of secret objects.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-09 15:53:48 +00:00
Daniel P. Berrange
c50070173d Add domain event for metadata changes
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-01-09 15:53:00 +00:00
John Ferlan
0c234889c4 storage: Introduce virStorageVolInfoFlags
https://bugzilla.redhat.com/show_bug.cgi?id=1332019

This function will essentially be a wrapper to virStorageVolInfo in order
to provide a mechanism to have the "physical" size of the volume returned
instead of the "allocation" size. This will provide similar capabilities to
the virDomainBlockInfo which can return both allocation and physical of a
domain storage volume.

NB: Since we're reusing the _virStorageVolInfo and not creating a new
_virStorageVolInfoFlags structure, we'll need to generate the rpc APIs
remoteStorageVolGetInfoFlags and remoteDispatchStorageVolGetInfoFlags
(although both were originally created from gendispatch.pl and then
just copied into daemon/remote.c and src/remote/remote_driver.c).

The new API will allow the usage of a VIR_STORAGE_VOL_GET_PHYSICAL flag
and will make the decision to return the physical or allocation value
into the allocation field.

In order to get that physical value, virStorageBackendUpdateVolTargetInfoFD
adds logic to fill in physical value matching logic in qemuStorageLimitsRefresh
used by virDomainBlockInfo when the domain is inactive.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-12-20 13:52:39 -05:00
Nitesh Konkar
71bbe65311 perf: add ref_cpu_cycles perf event support
This patch adds support and documentation for
the ref_cpu_cycles perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2016-12-15 17:32:03 -05:00
Nitesh Konkar
9ae79400ff perf: add stalled_cycles_backend perf event support
This patch adds support and documentation for
the stalled_cycles_backend perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2016-12-15 16:47:05 -05:00
Nitesh Konkar
060c159b08 perf: add stalled_cycles_frontend perf event support
This patch adds support and documentation
for the stalled_cycles_frontend perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2016-12-15 16:47:05 -05:00
Nitesh Konkar
7d34731067 perf: add bus_cycles perf event support
This patch adds support and documentation
for the bus_cycles perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2016-12-15 16:47:05 -05:00
Erik Skultety
1a38fbaa86 admin: Introduce virAdmConnectSetLoggingFilters
Enable libvirt users to modify logging filters of a daemon from outside.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-12-15 10:36:23 +01:00
Erik Skultety
ceeb85bd00 admin: Introduce virAdmConnectSetLoggingOutputs
Enable libvirt users to modify daemon's logging output settings from outside.
If either an empty string or NULL is passed, a default logging output will be
used the same way as it would be in case writing an empty string to the
libvirtd.conf

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-12-15 10:36:23 +01:00
Erik Skultety
cd484b534e admin: Introduce virAdmConnectGetLoggingFilters
Enable libvirt users to query logging filter settings.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-12-15 10:36:23 +01:00
Erik Skultety
fc7d1be79e admin: Introduce virAdmConnectGetLoggingOutputs
Enable libvirt users to query logging output settings.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
2016-12-15 10:36:23 +01:00
Nitesh Konkar
8981d7925e perf: add branch_misses perf event support
This patch adds support and documentation
for the branch_misses perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2016-12-12 18:04:52 -05:00
Nitesh Konkar
8546adf80b perf: add one more perf event support
With current perf framework, this patch adds support and documentation
for the branch_instructions perf event.

Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
2016-12-07 07:03:57 -05:00
John Ferlan
c53bd25b13 qemu: Add support for parsing iotune group setting
Add support to read/parse the iotune group setting for qemu.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-12-05 18:12:08 -05:00
John Ferlan
9001662b9f include: Add new "group_name" definition for iotune throttling
Add the new field to support sharing I/O throttling quota between
multiple drives.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-12-05 18:12:08 -05:00
Jiri Denemark
4e116e9dad Enhance documentation of virDomainMigrateFlags
The enhanced documentation of VIR_MIGRATE_RDMA_PIN_ALL fixes
https://bugzilla.redhat.com/show_bug.cgi?id=1373783

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2016-11-29 16:48:03 +01:00
Pino Toscano
f0e7f90bff virerror: add error for libssh transport
Add a new error domain and number for a new libssh-based transport.
2016-11-15 15:50:51 +01:00
John Ferlan
223438a245 qemu: Add length for bps/iops throttling parameters to driver
Add support for a duration/length for the bps/iops and friends.

Modify the API in order to add the "blkdeviotune." specific definitions
for the iotune throttling duration/length options

    total_bytes_sec_max_length
    write_bytes_sec_max_length
    read_bytes_sec_max_length
    total_iops_sec_max_length
    write_iops_sec_max_length
    read_iops_sec_max_length
2016-10-25 17:20:13 -04:00
John Ferlan
2d3377c3a0 include: Add new definitions for duration for bps/iops throttling
Add new options to allow proving a duration/length in seconds to allow the
bps/iops (and friends) to occur:

    total_bytes_sec_max_length
    write_bytes_sec_max_length
    read_bytes_sec_max_length
    total_iops_sec_max_length
    write_iops_sec_max_length
    read_iops_sec_max_length

Add continue for compiler hint to return to for control
2016-10-25 17:16:26 -04:00
John Ferlan
12629888fc docs: Alter descriptions of perf cpu_cycles
https://bugzilla.redhat.com/show_bug.cgi?id=1381714

Alter the descriptions to match what the cpu_cycles actually is
2016-10-07 13:27:16 -04:00
John Ferlan
52194faa9e include: Update description for <iotune> max params
The upstream qemu commit 'dce13204' changed the wording just slightly
to add 'in bursts' essentially.  Just following that model here.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-10-05 18:53:55 -04:00
John Ferlan
c95976506f docs: Fix typo in libvirt-domain.h parameter description
Change Marco to Macro

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-10-05 18:53:55 -04:00
Peter Krempa
0f95f31c83 lib: Introduce VIR_DOMAIN_VCPU_HOTPLUGGABLE for virDomainSetVcpusFlags
For compatibility reasons virDomainSetVcpus needs to add vcpus as non
hotpluggable which means that the users will not be able to unplug it
after the VM has started. Add a flag that will allow to tell the API
that the unpluggable vcpus are okay.
2016-10-05 09:05:52 +02:00
Daniel P. Berrange
b6056cb6f3 Add missing 'extern' for VIR_EXPORT_VAR macro
The recent update to gnulib

  commit 9d7a37ecb2
  Author: Eric Blake <eblake@redhat.com>
  Date:   Thu Sep 15 15:12:52 2016 -0500

    build: update to latest gnulib

Pulled in a change that adds -fno-common to the default compiler
flags

  commit bf8e658ffadb95d444f56d222d04c9af955af765
  Author: Jim Meyering <meyering@fb.com>
  Date:   Fri Sep 2 09:16:16 2016 -0700

    manywarnings: add -fno-common

This caused libvirt Mingw build to break with the compiler
reporting 100's of definitions of virConnectAuthPtrDefault

./.libs/libvirt_util.a(libvirt_util_la-virarch.o):virarch.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
./.libs/libvirt_util.a(libvirt_util_la-viralloc.o):viralloc.c:(.bss+0x0): first defined here
./.libs/libvirt_util.a(libvirt_util_la-viratomic.o):viratomic.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
./.libs/libvirt_util.a(libvirt_util_la-viralloc.o):/home/berrange/src/virt/libvirt/src/util/viralloc.c:87: first defined here
./.libs/libvirt_util.a(libvirt_util_la-viraudit.o):viraudit.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
./.libs/libvirt_util.a(libvirt_util_la-viralloc.o):/home/berrange/src/virt/libvirt/src/util/viralloc.c:87: first defined here
./.libs/libvirt_util.a(libvirt_util_la-virauth.o):virauth.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
./.libs/libvirt_util.a(libvirt_util_la-viralloc.o):/home/berrange/src/virt/libvirt/src/util/viralloc.c:87: first defined here
./.libs/libvirt_util.a(libvirt_util_la-virauthconfig.o):virauthconfig.c:(.bss+0x0): multiple definition of `virConnectAuthPtrDefault'
...snip...

The cause is our VIR_EXPORT_VAR macro which has some
magic on win to add dllexport/dllimport to the variable
declaration. Unfortunately the dllexport branch missed
off the 'extern' keyword, so the header file was in
fact declaring an instance of the variable in every
source file.

Previously the linker would merge all these definitions
into one, but that no longer happens due to -fno-common

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-09-20 12:55:28 +01:00
Nikolay Shirokovskiy
bdf83c011d api: add VIR_DOMAIN_UNDEFINE_KEEP_NVRAM flag
This flags specifies to keep nvram file if it is existed for inactive
domains.

Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2016-09-13 09:31:50 +02:00
John Ferlan
13350a17e4 conf: Add new secret type "tls"
Add a new secret usage type known as "tls" - it will handle adding the
secret objects for various TLS objects that need to provide some sort
of passphrase in order to access the credentials.

The format is:

   <secret ephemeral='no' private='no'>
     <description>Sample TLS secret</description>
     <usage type='tls'>
       <name>mumblyfratz</name>
     </usage>
</secret>

Once defined and a passphrase set, future patches will allow the UUID
to be set in the qemu.conf file and thus used as a secret for various
TLS options such as a chardev serial TCP connection, a NBD client/server
connection, and migration.

Signed-off-by: John Ferlan <jferlan@redhat.com>
2016-09-09 08:20:05 -04:00
Yuri Pudgorodskiy
914d5e1cbf qemu: guest agent: introduce new error code VIR_ERR_AGENT_UNSYNCED
A separate error code will help recognize real failures from
necessity to try again

Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
2016-09-07 12:35:18 +03:00
Qiaowei Ren
bae660869d perf: add more perf events support
With current perf framework, this patch adds support and documentation
for more perf events, including cache misses, cache references, cpu cycles,
and instructions.

Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
2016-09-02 17:00:58 -04:00