If a remote call fails during event registration (more than likely from
a network failure or remote libvirtd restart timed just right), then when
calling the virObjectEventStateDeregisterID we don't want to call the
registered @freecb function because that breaks our contract that we
would only call it after succesfully returning. If the @freecb routine
were called, it could result in a double free from properly coded
applications that free their opaque data on failure to register, as seen
in the following details:
Program terminated with signal 6, Aborted.
#0 0x00007fc45cba15d7 in raise
#1 0x00007fc45cba2cc8 in abort
#2 0x00007fc45cbe12f7 in __libc_message
#3 0x00007fc45cbe86d3 in _int_free
#4 0x00007fc45d8d292c in PyDict_Fini
#5 0x00007fc45d94f46a in Py_Finalize
#6 0x00007fc45d960735 in Py_Main
#7 0x00007fc45cb8daf5 in __libc_start_main
#8 0x0000000000400721 in _start
The double dereference of 'pyobj_cbData' is triggered in the following way:
(1) libvirt_virConnectDomainEventRegisterAny is invoked.
(2) the event is successfully added to the event callback list
(virDomainEventStateRegisterClient in
remoteConnectDomainEventRegisterAny returns 1 which means ok).
(3) when function remoteConnectDomainEventRegisterAny is hit,
network connection disconnected coincidently (or libvirtd is
restarted) in the context of function 'call' then the connection
is lost and the function 'call' failed, the branch
virObjectEventStateDeregisterID is therefore taken.
(4) 'pyobj_conn' is dereferenced the 1st time in
libvirt_virConnectDomainEventFreeFunc.
(5) 'pyobj_cbData' (refered to pyobj_conn) is dereferenced the
2nd time in libvirt_virConnectDomainEventRegisterAny.
(6) the double free error is triggered.
Resolve this by adding a @doFreeCb boolean in order to avoid calling the
freeCb in virObjectEventStateDeregisterID for any remote call failure in
a remoteConnect*EventRegister* API. For remoteConnect*EventDeregister* calls,
the passed value would be true indicating they should run the freecb if it
exists; whereas, it's false for the remote call failure path.
Patch based on the investigation and initial patch posted by
fangying <fangying1@huawei.com>.
virDomainXMLOption gains driver specific callbacks for parsing and
formatting save cookies.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This will be used later when a save cookie will become part of the
snapshot XML using new driver specific parser/formatter functions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we have a bit more control, let's convert our object into
a lockable object and let that magic handle the create and lock/unlock.
This commit also introduces virInterfaceObjEndAPI in order to handle the
lock unlock and object unref in one call for consumers returning a NULL
obj upon return. This removes the need for virInterfaceObj{Lock|Unlock}
external API's.
Signed-off-by: John Ferlan <jferlan@redhat.com>
While checking for ABI stability, drivers might pose additional
checks that are not valid for general case. For instance, qemu
driver might check some memory backing attributes because of how
qemu works. But those attributes may work well in other drivers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In preparation for privatizing the virNodeDeviceObj - create an accessor
for the @def field and then use it for various callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Alter the algorithm to return a list of matching names rather than a
list of match virInterfaceObjPtr which are then just dereferenced
extracting the def->name and def->mac. Since the def->mac would be
the same as the passed @mac, just return a list of names and as long
as there's only one, extract the [0] entry from the passed list.
Also alter the error message on failure to include the mac that wasn't
found.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the structs into virinterfaceobj.c, create necessary accessors, and
initializers.
This also includes reworking virInterfaceObjListClone to handle receiving
a source interfaces list pointer, creating the destination interfaces object,
and copying everything from source into dest.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We're about to make the obj much more private, so make it easier to
see future changes which will require accessors for the obj->def
This also includes modifying some interfaces->objs[i]->X references to be
obj = interfaces->objs[i]; and then def = obj->def
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than using goto cleanup on object find failure and having cleanup
need to check if the obj was present before unlocking, just return immediately.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit 4337bc57be introduced code that would in certain error paths
unref the last reference of a pointer, but return it.
Clear the pointers before returning them.
Commit id '865f479da' altered the logic to use a common test*ObjFindByName
helpers which would lock/unlock the test driver; however, a few cleanup paths
in that cleanup missed removing the Unlock, so remove it now.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use "virNetworkObj" as a prefix for any external API in virnetworkobj.
Also a couple of functions were local to virnetworkobj.c, so remove their
external defs in virnetworkobj.h.
Move all the virNetworkObj related API/data structures into their own
modules virnetworkobj.{c,h} from the network_conf.{c,h}
Purely code motion at this point plus adjustments to cleanly build
Mostly code motion to move storageConnectList[Defined]StoragePools
and similar test driver code into virstorageobj.c and rename to
virStoragePoolObjGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOf[Defined]StoragePools API into virstorageobj.c from
storage_driver and test_driver. The only real difference between the
two is the test driver doesn't call using the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Mostly code motion to move storagePoolListVolumes code into virstorageobj.c
and rename to virStoragePoolObjVolumeGetNames.
Also includes a couple of variable name adjustments to keep code consistent
with other drivers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOfVolumes API into virstorageobj.c from storage_driver and
test_driver. The only real difference between the two is the test driver
doesn't call using the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the *ListDevice API into virnodedeviceobj.c from node_device_driver
and test_driver. The only real difference between the two is that the test
driver doesn't call the aclfilter API. The name of the new API follows that
of other drivers to "GetNames".
NB: Change some variable names to match what they really are - consistency
with other drivers. Also added a clear of the input names.
This also allows virNodeDeviceObjHasCap to be static to virnodedeviceobj
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unify the NumOfDevices API into virnodedeviceobj.c from node_device_driver
and test_driver. The only real difference between the two is that the test
driver doesn't call the aclfilter API.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Clean up the code to adhere to more of the standard two spaces between
functions, separate lines for type and function name, one argument per line.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unlike other drivers, this is a test driver only API. Still combining
the logic of testConnectListInterfaces and testConnectListDefinedInterfaces
makes things a bit easier in the long run.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Unlike other drivers, this is a test driver only API. Still combining
the logic of testConnectNumOfInterfaces and testConnectNumOfDefinedInterfaces
makes things a bit easier in the long run.
Signed-off-by: John Ferlan <jferlan@redhat.com>
So far our code is full of the following pattern:
dom = virGetDomain(conn, name, uuid)
if (dom)
dom->id = 42;
There is no reasong why it couldn't be just:
dom = virGetDomain(conn, name, uuid, id);
After all, client domain representation consists of tuple (name,
uuid, id).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Move all the StoragePoolObj related API's into their own module
virstorageobj from the storage_conf
Purely code motion at this point, plus adjustments to cleanly build
Signed-off-by: John Ferlan <jferlan@redhat.com>
Fix a "bug" in the storage pool test driver code which "assumed"
testStoragePoolObjSetDefaults should fill in the configFile for
both the Define/Create (persistent) and CreateXML (transient) pools
by just VIR_FREE()'ing it during CreateXML. Because the configFile
was filled in, during Destroy the pool wouldn't be free'd which
could cause issues for future patches which add tests to validate
vHBA creation for the storage pool using the same name.
Move the virStoragePoolSourceAdapter from storage_conf.h and rename
to virStorageAdapter.
Continue with code realignment for brevity and flow.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add a new test to fchosttest in order to test creation of our vHBA
via the Storage Pool logic. Unlike the real code, we cannot yet use
the virVHBA* API's because they (currently) traverse the file system
in order to get the parent vport capable scsi_host. Besides there's
no "real" NPIV device here - so we have to take some liberties, at
least for now.
Instead, we'll follow the node device tests partially in order to
create and destroy the vHBA with the test node devices.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Make common helpers testNetworkObjFindByUUID and testStoragePoolObjFindByUUID
which will replace the repeated patter for each to find objects by UUID.
As a bonus, the error message processing will also provide the failed uuidstr
rather than a generic error message.
Rather than have multiple places using the same pattern to find
a network by name using virNetworkObjFindByName, create a common
helper which will provide a consistent error message as well.
Rather than have continued repeated sequences of :
testDriverLock()
xxx = vir*ObjFindByName()
testDriverUnlock()
if (xxx == NULL) {
virReportError
goto cleanup;
}
Make some common helpers which will use the pattern and make a single
reference using a single common error message.
Altered for Interfaces, Storage Pools, Storage Volumes, and Node Devices.
For each the common error message can now also indicate which 'name' was
not found. For Storage Volumes, the "new" error will be more specific
rather than just invalid argument.
Move all the NodeDeviceObj API's into their own module virnodedeviceobj
from the node_device_conf
Purely code motion at this point, plus adjustments to cleanly build.
This function is calling public APIs (virNodeDeviceLookupByName
etc.). That requires the driver lock to be unlocked and locked
again. If we, however, replace the public APIs calls with the
internal calls (that public APIs call anyway), we can drop the
lock/unlock exercise.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rework the code to perform the various searches by parent, parent_wwnn/
parent_wwpn, parent_fabric_wwn, or vport capable in order to return the
'parent_host' number that is vHBA capable.
The former virNodeDeviceGetParentHost is renamed to add the ByParent
on it fixes an issue where if no parent was supplied in the XML to
create the vHBA, then virNodeDeviceFindByName was called with a NULL
second parameter which had bad results.
The reworked code will make the various calls to fetch the NPIV host
by the passed parameter options or if none are provided find a vport
capable NPIV HBA to perform the create. If the call is from the delete
path, then this option won't be allowed.
Each of virNodeDeviceGetParentHostBy* functions is now static, so
remove them external definitions.
A secondary benefit of this is the test_driver now can make use of
the new API to add some new tests to test the various creation options.
Modify the code to react more like a real HBA -> vHBA creation.
Currently the code would just modify the input XML definition to
set the name to a wwpn and then modify the scsi_host capability
entry for the defintion to change the scsi_host# and unique_id
before adding that into the node device.
This patch does things a bit better. It finds and copies a known
existing vHBA (scsi_host11) in the node_device database and modifies
that definition to change the name to scsi_host12 and set the wwnn/
wwpn to what the input XML would expect before adding the def to the
node device object list.
Then rather than create a returned "dev" using the (poorly) mocked
name - perform the lookup using the new device name.
Rather than inline the dummy creation of a vHBA to add to the node
devices - create a helper to do that work.
Also just tidy up a couple of things while at it...
Predefine a second NPIV capable HBA as well as a vHBA using the first
NPIV capable HBA. This will allow for a mechanism to perform more
realistic create vHBA testing.
Alter "test-scsi-host-vport" to be "scsi_host1" to match the real
environment. This is the vport capable HBA - IOW the NPIV device.
Add more fields to scsi_host1 as well.
Alter the XML being used by the objecttest to create a vHBA in order
to match the scsi_host1 parent name and to use validateable wwnn/wwpn.
This will allow for realistic testing.
When the 'parent' was added to the virNodeDevicePtr structure
by commit id 'e8a4ea75a' the 'parent' field was not properly filled
in when a virGetNodeDevice call was made within driver/config code.
Only the device name was ever filled in. Fetching the parent required
a second trip via virNodeDeviceGetParent into the node device lookup
code was required in order to retrieve the specific parent field (and
still the parent field was never filled in although it was free'd).
Since we have the data when we initially call virGetNodeDevice from
within driver/node_config code - let's just fill in the parent field
as well for anyone that wants it without requiring another trip into
the node_device lookup just to get the parent.
This will allow API's such as virConnectListAllNodeDevices,
virNodeDeviceLookupByName, and virNodeDeviceLookupSCSIHostByWWN
to retrieve both name and parent in the returned virNodeDevicePtr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When redoing the website we deleted the libvirtLogo.png file
not remembering that the test driver screenshot API impl
relied on it.
Rather than having the test driver use the logo as a side
effect, give it its own dedicated image to use. This is
installed in /usr/share/libvirt/test-screenshot.png and
is taken from a NeXT Cube running WorldWideWeb[1]. The
very first web browser in existance, running on the
hardware it was originally written on.
[1] https://en.wikipedia.org/wiki/WorldWideWeb
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
New line character in name of domain is now forbidden because it
mess virsh output and can be confusing for users.
Validation of name is done in drivers, after parsing XML to avoid
problems with dissappeared domains which was already created with
new-line char in name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some operations like reboot, save, coreDump, blockStats,
ifaceStats make sense iff domain is running. While it is
technically possible for our test driver to return success
regardless of domain state, we should copy constraints from
other drivers and thus deny these operations over inactive
domains.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Fixes the behavior when destroying a domain more than once.
VIR_ERR_OPERATION_INVALID should be raised when destroying an
already destroyed domain.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParseXML and subsequently virDomainDefPostParse too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our internal APIs mostly use virArch rather than strings. Switching
cpuGetModels to virArch will save us from unnecessary conversions in the
future.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In testOpenDefault we create a virtual computer that is later
presented to user. We also pretend to have NUMA cells and
initialize them somehow. But whilst doing so a magical constant
is used. Drop it.
Signed-off-by: Tomáš Ryšavý <tom.rysavy.0@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The code for replacing domain's transient definition with the persistent
one is repeated in several places and we'll need to add one more. Let's
make a nice helper for it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Test 12 from objecteventtest (createXML add event) segaults on FreeBSD
with bus error.
At some point it calls testNodeDeviceDestroy() from the test driver. And
it fails when it tries to unlock the device in the "out:" label of this
function.
Unlocking fails because the previous step was a call to
virNodeDeviceObjRemove from conf/node_device_conf.c. This function
removes the given device from the device list and cleans up the object,
including destroying of its mutex. However, it does not nullify the pointer
that was given to it.
As a result, we end up in testNodeDeviceDestroy() here:
out:
if (obj)
virNodeDeviceObjUnlock(obj);
And instead of skipping this, we try to do Unlock and fail because of
malformed mutex.
Change virNodeDeviceObjRemove to use double pointer and set pointer to
NULL.
A nodedev device definition like this is required for testing
NodeDeviceCreateXML and NodeDeviceDestroy. So unless it's part
of the stock test:///default set there's no way to actually
invoke those functions for the default URI
Convert the individual XML documents into one big XML document
in the format expected by the non-default test://$PATH URI, and
use the same internal helpers for assembling the driver contents.
Allow to store driver specific data on a per-vcpu basis.
Move of the virDomainDef*Vcpus* functions was necessary as
virDomainXMLOptionPtr was declared below this block and I didn't want to
split the function headers.
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.
It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.
There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the live attribute and mark the definition as transient
whether the domain is runing or not.
There were only two callers left calling with live=false:
* testDomainStartState, where the domain already is active
because we assigned vm->def->id just a few lines above the call
* virDomainObjGetPersistentDef, which now only calls
virDomainObjSetDefTransient for an active domain
Our existing virHashForEach method iterates through all items disregarding the
fact, that some of the iterators might have actually failed. Errors are usually
dispatched through an error element in opaque data which then causes the
original caller of virHashForEach to return -1. In that case, virHashForEach
could return as soon as one of the iterators fail. This patch changes the
iterator return type and adjusts all of its instances accordingly, so the
actual refactor of virHashForEach method can be dealt with later.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The virDomainSnapshotDefFormat calls into virDomainDefFormat,
so should be providing a non-NULL virCapsPtr instance. On the
qemu driver we change qemuDomainSnapshotWriteMetadata to also
include caps since it calls virDomainSnapshotDefFormat.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Report
error: invalid argument: requested vcpu '100' is not present in the domain
instead of
error: invalid argument: requested vcpu is higher than allocated vcpus
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So while working on my previous patches, I've noticed that
virDomainRestore implementation in qemu and test drivers has the
same problem as I am fixing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871452
So, you want to create a domain from XML. The domain already
exists in libvirt's database of domains. It's okay, because name
and UUID matches. However, on domain startup, internal
representation of the domain is overwritten with your XML even
though we claim that the XML you've provided is a transient one.
The bug is to be found across nearly all the drivers.
Le sigh.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=871452
Okay, so we allow users to 'virsh create' an already existing
domain, providing completely different XML than the one stored in
Libvirt. Well, as long as name and UUID matches. However, in some
drivers the code that handles errors unconditionally removes the
domain that failed to start even though the domain might have
been persistent. Fortunately, the domain is removed just from the
internal list of domains and the config file is kept around.
Steps to reproduce:
1) virsh dumpxml $dom > /tmp/dom.xml
2) change XML so that it is still parse-able but won't boot, e.g.
change guest agent path to /foo/bar
3) virsh create /tmp/dom.xml
4) virsh dumpxml $dom
5) Observe "No such domain" error
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Invalid read of size 4
at 0x945CA30: __pthread_mutex_unlock_full (in /lib64/libpthread-2.20.so)
by 0x4F0404B: virMutexUnlock (virthread.c:94)
by 0x4F7161B: virStoragePoolObjUnlock (storage_conf.c:2603)
by 0x4FE0476: testStoragePoolUndefine (test_driver.c:4328)
by 0x4FCF086: virStoragePoolUndefine (libvirt-storage.c:656)
by 0x15A7F5: cmdPoolUndefine (virsh-pool.c:1721)
by 0x12F48D: vshCommandRun (vsh.c:1212)
by 0x132AA7: main (virsh.c:943)
Address 0xfda56a0 is 16 bytes inside a block of size 104 free'd
at 0x4C2BA6C: free (vg_replace_malloc.c:473)
by 0x4EA5C96: virFree (viralloc.c:582)
by 0x4F70B69: virStoragePoolObjFree (storage_conf.c:412)
by 0x4F7167B: virStoragePoolObjRemove (storage_conf.c:437)
by 0x4FE0468: testStoragePoolUndefine (test_driver.c:4323)
by 0x4FCF086: virStoragePoolUndefine (libvirt-storage.c:656)
by 0x15A7F5: cmdPoolUndefine (virsh-pool.c:1721)
by 0x12F48D: vshCommandRun (vsh.c:1212)
by 0x132AA7: main (virsh.c:943)
Drop internal data structures and use the proper fields in virDomainDef.
This allows to greatly simplify the code and allows to remove the
private data structure that was holding just redundant data.
This patch also fixes the bogous output where we'd report that a fresh
VM without vCPU pinning would not run on all vcpus.
Only self-locking APIs are used and the pointer is immutable so there's
no need to lock the driver to access the domain list.
This patch removes locking partially for everything that will not be
converted to testDomObjFromDomain in the next patch.
Make testObjectEventQueue tolerant to NULL @event and move it so that it
does not require a prototype. Additionally we are now able to remove
locking when accessing driver->eventState, since it's using self-locking
APIs and the pointer is immutable.
In a couple of cases, the node device driver (and the test node device
driver which likely copied it) was only logging "Node device not
found" when it couldn't find the requested device. This patch changes
those cases to log the name (and in the case when it's relevant, the
wwnn and wwpn) as well.
For some reason a union (_virNodeDevCapData) that had only been
declared inside the toplevel struct virNodeDevCapsDef was being used
as an argument to functions all over the place. Since it was only a
union, the "type" attribute wasn't necessarily sent with it. While
this works, it just seems wrong.
This patch creates a toplevel typedef for virNodeDevCapData and
virNodeDevCapDataPtr, making it a struct that has the type attribute
as a member, along with an anonymous union of everything that used to
be in union _virNodeDevCapData. This way we only have to change the
following:
s/union _virNodeDevCapData */virNodeDevCapDataPtr /
and
s/caps->type/caps->data.type/
This will make me feel less guilty when adding functions that need a
pointer to one of these.
Every domain that grabs a domain object to work over should
reference it to make sure it won't disappear meanwhile.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
In the order of appearance:
* MAX_LISTEN - never used
added by 23ad665c (qemud) and addec57 (lock daemon)
* NEXT_FREE_CLASS_ID - never used, added by 07d1b6b
* virLockError - never used, added by eb8268a4
* OPENVZ_MAX_ARG, CMDBUF_LEN, CMDOP_LEN
unused since the removal of ADD_ARG_LIT in d8b31306
* QEMU_NB_PER_CPU_STAT_PARAM - unused since 897808e
* QEMU_CMD_PROMPT, QEMU_PASSWD_PROMPT - unused since 1dc10a7
* TEST_MODEL_WORDSIZE - unused since c25c18f7
* TEMPDIR - never used, added by 714bef5
* NSIG - workaround around old headers
added by commit 60ed1d2
unused since virExec was moved by commit 02e8691
* DO_TEST_PARSE - never used, added by 9afa006
* DIFF_MSEC, GETTIMEOFDAY - unused since eee6eb6
This function does not make any sense now, that network driver is
(almost) dropped. I mean, previously, when threads were
serialized, this function was there to check, if no other network
with the same name or UUID exists. However, nowadays that threads
can run more in parallel, this function is useless, in fact it
gives misleading return values. Consider the following scenario.
Two threads, both trying to define networks with same name but
different UUID (e.g. because it was generated during XML parsing
phase, whatever). Lets assume that both threads are about to call
networkValidate() which immediately calls
virNetworkObjIsDuplicate().
T1: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T2: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T1: calls virNetworkAssignDef() and successfully places its
network into the virNetworkObjList.
T2: calls virNetworkAssignDef() and since network with the same
name exists, the network definition is replaced.
Okay, this is mainly because virNetworkAssignDef() does not check
whether name and UUID matches. Well, lets make it so! And drop
useless function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
Well, if 'everywhere' is defined as that part of the driver code
that serves virNetwork* APIs. Again, we lower layers already have
their locks, so there's no point doing big lock.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch turns both virNetworkObjFindByUUID() and
virNetworkObjFindByName() to return an referenced object so that
even if caller unlocks it, it's for sure that object won't
disappear meanwhile. Especially if the object (in general) is
locked and unlocked during the caller run.
Moreover, this commit is nicely small, since the object unrefing
can be done in virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, this is pure code replacement. But once we introduce
reference counting to virNetworkObj this will be more handy as
there'll be only one function to change: virNetworkObjEndAPI().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far it's just a structure which happens to have 'Obj' in its
name, but otherwise it not related to virObject at all. No
reference counting, not virObjectLock(), nothing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, one day this will be self-locking object, but not today.
But lets prepare the code for that! Moreover,
virNetworkObjListFree() is no longer needed, so turn it into
virNetworkObjListDispose().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order to hide the object internals (and use just accessors
everywhere), lets store a pointer to the object, instead of object
itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Instead of copying the whole object onto stack when calling the
function, just pass the pointer to the object and save up some
space on the stack. Moreover, this prepares the code to hide the
virNetworkObjList structure into network_conf.c and use accessors
only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Silly this bug went unnoticed so long. At the beginning we try to
find the passed network in the list of network objects. If found,
it's locked and real work takes place. Then, in the end, the
network object is never unlocked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
I noticed this while working on qemuDomainGetBlockInfo. Assigning
a bool value to an int variable compiles fine, but raises red flags
on the maintenance front as it becomes too easy to assign -1 or 2
or any other non-bool value to the same variable.
* cfg.mk (sc_prohibit_int_assign_bool): New rule.
* src/conf/snapshot_conf.c (virDomainSnapshotRedefinePrep): Fix
offenders.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotCreateXML): Likewise.
* src/test/test_driver.c (testDomainSnapshotAlignDisks):
Likewise.
* src/util/vircgroup.c (virCgroupSupportsCpuBW): Likewise.
* src/util/virpci.c (virPCIDeviceBindToStub): Likewise.
* src/util/virutil.c (virIsCapableVport): Likewise.
* tools/virsh-domain-monitor.c (cmdDomMemStat): Likewise.
* tools/virsh-domain.c (cmdBlockResize, cmdScreenshot)
(cmdInjectNMI, cmdSendKey, cmdSendProcessSignal)
(cmdDetachInterface): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since the secondary drivers are only active when the primary
driver is also the Test driver, there is no need to use the
different type specific privateData fields.
