Similar knobs, such as firewalld_zone and sysctl_config, are
already features, so convert this one as well to comply with
expectations.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Attempting to enable apparmor_profiles when apparmor support
is not enabled should result in an error.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This is the preferred way to figure out whether a library is
available, and for the most part we can just adopt it right
away; in a few cases, unfortunately, we're stuck with using
cc.find_library() until further down the road, when all our
target platforms ship with pkg-config enabled versions of the
various libraries.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
libacl is Linux-only, so we don't need to explicitly check for
either the target platform or header availability, and we can
simply rely on cc.find_library() instead. The corresponding
preprocessor define is renamed to more accurately reflect the
nature of the check.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
firewalld is Linux-only, so it should be disabled by default
everywhere else and attempts to explicitly enable firewalld
support on non-Linux targets should result in an error.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This makes it possible to explicitly disable firewalld support
regardless of the platform that's being targeted.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If the feature is disabled, the corresponding flags should not
show up in the compiler command line.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The new version will report an error if the user asks for
polkit support to be enabled on Windows instead of silently
ignoring such requests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If the user explicitly asked for sanlock support to be enabled,
then failure to find the corresponding library should result in
an error.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We're supposed to error out if the user has explicitly asked
for vstorage support to be enabled and that can't be done, but
we've been looking at the wrong option.
Fixes: 2127d53f2f
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Meson already knows how to look for pcap using pkg-config
first, and falling back to pcap-config if that didn't work.
https://mesonbuild.com/Dependencies.html#pcap
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Meson offers a native convenience method that can be used to
fetch pkg-config variables from a dependency, so we can use
that instead of calling pkg-config manually.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We want to be explicit about which features are enabled in our
RPM build instead of relying on default values.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_DOMAIN_DISK_PRIVATE(disk)->transientOverlayCreated flag
gets true unexpectedly on qemuProcessSetupDisksTransientSnapshot() when
the disk has <transient shareBacking='yes'> option.
The flag should be enabled on qemuDomainAttachDiskGeneric() after the
overlay setup is completed.
Skip enabling transientOverlayCreated for the disk here.
Fixes: 75871da0ec
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We supported autostart of node devices via an xml element, but this
is not consistent with other libvirt objects which use an explicit API
for setting autostart status. So revert this and implement it as an
official API in a future commit.
The initial support was refactored after merging, so this commit reverts
both of those previous commits.
Revert "virNodeDevCapMdevParseXML: Use virXMLPropEnum() for ./start/@type"
This reverts commit 9d4cd1d1cd.
Revert "nodedev: support auto-start property for mdevs"
This reverts commit 42a5585499.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This reverts parts of commit bb8c3b6120
that added tests for autostart functionality (which will be reverted in
the following commit)
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
While we couldn't historically connect to the remote session daemon
automatically, we do allow the user to set an explicit socket path
to enable the connections to work. This ability was accidentally
lost in
commit f8ec7c842d
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jul 8 17:03:38 2020 +0100
rpc: use new virt-ssh-helper binary for remote tunnelling
We need to force use of 'netcat' when a 'socket' path is given in
the URI parameters.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the defaults for the proxy/mode settings are set before
parsing URI parameters. A following commit will introduce a dependancy
on the URI parsing for the defaults, so they need to move.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In one of my recent commits I've done some renaming. But whilst
doing so I also mistakenly replaced 'goto cleanup' with 'return
-1' in virCapabilitiesHostNUMAInitReal() which was incorrect.
Fixes: fe25224fda
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The remoteGetUNIXSocketHelper method always returns a non-NULL string.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
virFileFindResource needs to be given the absolute build path otherwise
its results will vary according to the CWD, leading to spurious failures
in dev testing.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently translated at 20.9% (2158 of 10314 strings)
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/fi/
Co-authored-by: Jan Kuparinen <copper_fin@hotmail.com>
Signed-off-by: Jan Kuparinen <copper_fin@hotmail.com>
Updated by "Update PO files to match POT (msgmerge)" hook in Weblate.
Translation: libvirt/libvirt
Translate-URL: https://translate.fedoraproject.org/projects/libvirt/libvirt/
Co-authored-by: Weblate <noreply@weblate.org>
Signed-off-by: Fedora Weblate Translation <i18n@lists.fedoraproject.org>
When <transient shareBacking='yes'> is set to a disk and the overlay
disk already exists because of something abnormal, libvirt is terminated
by Segmentation fault.
# virsh start Test0
error: Disconnected from qemu:///system due to end of file
error: Failed to start domain 'Test0'
error: End of file while reading data: Input/output error
Add NULL check for snapdiskdef so that the rollback can work correctly.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Fixes: 2e94002d2a
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
and re-adjust if the hotplug fails.
This fixes a bug found during testing of
https://bugzilla.redhat.com/1939776, which was supposed to be resolved
by commit 98e22ff749, but failed to account for the case of device
hotplug.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
An upcoming patch will be checking if the addition of a new net device
requires adjusting the domain locked memory limit, which must be done
prior to sending the command to qemu to add the new device. But
qemuDomainAdjustMaxMemLock() checks all (and only) the devices that
are currently in the domain definition, and currently we are adding
new net devices to the domain definition only at the very end of the
hotplug operation, after qemu has already executed the device_add
command.
In order for the upcoming patch to work, this patch changes
qemuDomainAttachNetDevice() to add the device to the domain nets list
at an earlier time. It can't be added until after PCI address and
alias name have been determined (because both of those examine
existing devices in the domain to figure out a unique value for the
new device), but must be done before making the qemu monitor call.
Since the device has been added to the list earlier, we need to
potentially remove it on failure. This is done by replacing the
existing call to virDomainNetRemoveHostdev() (which checks if this is
a hostdev net device, and if so removes it from the hostdevs list,
since it could have already been added to that list) with a call to
the new virDomainNetRemoveByObj(), which looks for the device on both
nets and hostdevs lists, and removes it where it finds it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virDomainNetRemove() requires the index of the net device you want to
remove from the list, but in some cases you may not have the index
handy, only the object itself (or the object may not have been added
to the domain's list). virDomainNetRemoveByObj() first tries to find
the given object in the nets list, and deletes that if it is found.
As with virDomainNetRemove() it always unconditionally tries to remove
the device from the hostdevs list (in case it is the ridiculous
combined net+hostdev device created for <interface type='hostdev'>).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have many places where the earliest error returns from a function
skip any cleanup label at the bottom (the assumption being that it is
so early in the function that there isn't yet anything that needs to
be explicitly undone on failure). But in general it is a bad sign if
there are any direct "return" statements in a function at any time
after there has been a "goto cleanup" - that indicates someone thought
that an earlier point in the code had done something needing cleanup,
so we shouldn't be skipping it.
There were two occurences of a "return -1" after "goto cleanup" in
qemuDomainAttachDeviceNet(). The first of these has been around for a
very long time (since 2013) and my assumption is that the earlier
"goto cleanup" didn't exist at that time (so it was proper), and when
the code further up in the function was added, the this return -1 was
missed. The second was added during a mass change to check the return
from qemuInterfacePrepareSlirp() in several places (commit
99a1cfc438); in this case it was erroneous from the start.
Change both of these "return -1"s to "goto cleanup". Since we already
have code paths earlier in the function that goto cleanup, this should
not cause any new problem.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In recent commit f772c1fd2a a misaligned %endif sneaked in which
upsets syntax-check. Align it properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There was a recent change in libxml2 that caused a trouble for
us. To us, <metadata/> in domain or network XMLs are just opaque
value where management application can store whatever data it
finds fit. At XML parser/formatter level, we just make a copy of
the element during parsing and then format it back. For
formatting we use xmlNodeDump() which allows caller to specify
level of indentation. Previously, the indentation was not
applied onto the very first line, but as of v2.9.12-2-g85b1792e
libxml2 is applying indentation also on the first line.
This does not work well with out virBuffer because as soon as we
call virBufferAsprintf() to append <metadata/> element,
virBufferAsprintf() will apply another level of indentation.
Instead of version checking, let's skip any indentation added by
libxml2 before virBufferAsprintf() is called.
Note, the problem is only when telling xmlNodeDump() to use
indentation, i.e. level argument is not zero. Therefore,
virXMLNodeToString() which also calls xmlNodeDump() is safe as it
passes zero.
Tested-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
I guess this is more of an academic problem, because if
<metadata/> content was problematic we would have caught the
error during parsing. Anyway, as is this function returns -1
without any error reported. Fix it by reporting one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
So far, we have to places where we format <metadata/> into XMLs:
domain and network. Bot places share the same code. Move it into
a helper function and just call it from those places.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Support for glusterfs with KVM is being dropped in RHEL-9 in the
virtualization stack.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Historically PowerPC 64 was always supported with qemu-kvm in RHEL.
In future RHEL-9 it is being discontinued and this was addressed
in
commit 03cc3c9064
Author: Jiri Denemark <jdenemar@redhat.com>
Date: Wed Apr 21 14:55:03 2021 +0200
spec: Do not build qemu driver for Power on RHEL-9
when the specfile was cleaned up to remove RHEL-7 support:
commit 0f601d2f86
Author: Andrea Bolognani <abologna@redhat.com>
Date: Wed May 5 19:30:46 2021 +0200
spec: Bump min_fedora and min_rhel
it also removed the logic that applied to RHEL-8 wrt arch list
and lost PowerPC 64 support on 8. This reverts that part of the
change but with the condition reversed to prioritize the future
state.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There's an if-else statement in libxlCapsInitNuma() that can
really be just two standalone if()-s. Writing it as such helps
with code readability.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Implement this behaviour by skipping the disks on traditional
commandline and hotplug them before resuming CPUs. That allows to use
the support for hotplugging of transient disks which inherently allows
sharing of the backing image as we open it read-only.
This commit implements the validation code to allow it only with buses
supporting hotplug and the hotplug code while starting up the VM.
When we have such disk we need to issue a system-reset so that firmware
tables are regenerated to allow booting from such device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
