Xen only supports one firmware, making autoselection easy to implement.
In fact, <os firmware='efi'> is probably preferable in the Xen driver,
where libxl supports a firmware setting with accepted values such as
bios, ovmf, uefi (currently same semantics as ovmf), seabios, etc.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Xen+ovmf does not support secure boot. Fail domain def validation
if secure boot is enabled.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce libxlDomainDefValidate and move the existing validation
check from libxlDomainDefPostParse. Additional validation will be
introduced in subsequent patches.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The audit log contains the following denials from libvirtd
apparmor="DENIED" operation="capable" profile="libvirtd" pid=6012 comm="daemon-init" capability=17 capname="sys_rawio"
apparmor="DENIED" operation="capable" profile="libvirtd" pid=6012 comm="rpc-worker" capability=39 capname="bpf"
apparmor="DENIED" operation="capable" profile="libvirtd" pid=6012 comm="rpc-worker" capability=38 capname="perfmon"
Squelch the denials and allow the capabilities in the libvirtd
apparmor profile.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We are already compiling libvirt with -Wvla - so it does not make
too much sense to still allow people to use alloca() instead. Thus
put it on the list of things we want to warn about. Fortunately,
there is currently no warning with this flag, so the current
sources should be clean.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The flag has a typo in it, it's "...-than=..." and not "...-then=...",
so this was in fact never used. Since we're also using -Wvla (without
size), we should already get warnings about any variable length arrays
anyway, so the additional "-Wvla-larger-than" does not make much sense
and thus we can simply drop this.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Currently `virt-host-validate` will fail whenever one of its calls fail,
regardless of virHostValidateLevel set.
This behaviour is not optimal and makes it not exactly reliable as a
command line tool as other tools or scripts using it would have to check
its output to figure out whether something really failed or if a warning
was mistakenly treated as failure.
With this change, the behaviour of whether to fail or not, is defined by
the caller of those functions, based on the virHostValidateLevel passed
to them.
https://gitlab.com/libvirt/libvirt/-/issues/175
Signed-off-by: Fabiano Fidêncio <fabiano@fidencio.org>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently we expose libvirt Go packages at
libvirt.org/libvirt-go
libvirt.org/libvirt-go-xml
These packages have not supported Go modules historically and when we
tried to introduce modules, we hit the problem that we're not using
semver for versioning.
The only way around this is to introduce new packages under a different
namespace, that will have the exact same code, but be tagged with a
different version numbering scheme.
This change proposes:
libvirt.org/go/libvirt
libvirt.org/go/libvirtxml
Note the hyphen is removed so that the import basename matches the
Go package name.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Disk serials are truncated arbitrarily and silently by qemu depending on
the device type and how they are configured. Since changing the current
state would lead to more regressions than we have now, document that the
truncation is arbitrary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Nowadays memfd is the most convenient memory backend for vhost-user
devices. Compared to file-backend memory and hugepages, there is no need
to worry about configuring the location of the shm directory or
allocating hugepages.
Cc: Michal Prívozník <mprivozn@redhat.com>
Cc: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove some dupicate text and replace in incorrect occurance of
monolithic with modular.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
In fcdcf8f70c the remoteGetUNIXSocket() function was changed and
one new variable was introduced (among other things): @env_name.
However, for WIN32 case the variable changed name to @env_path
which builds mingw builds.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virNetSocketNewConnectUNIX() function was changed in
48f66cfe3e. And its WIN32 version (which just reports an error)
was updated too, but this new argument @spawnDaemonPath was not
marked as unused.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to use those shared drivers provided by libvirt to avoid
implementing our own.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Wei Liu <liuwe@microsoft.com>
After previous patches, the @ret variable and the 'cleanup'
label are redundant. Remove them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
There are two variables that can be freed automatically: @cmd
(which allows us to drop explicit virCommandFree() call at the
end of the function) and @help which was never freed (and thus
leaked).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The CH driver needs "cloud-hypervisor" binary. And if none was
found then the initialization of the driver fails as
chStateInitialize() returns VIR_DRV_STATE_INIT_ERROR. This in
turn means that whole daemon fails to initialize. Let's return
VIR_DRV_STATE_INIT_SKIPPED in this particular case, which
disables the CH drvier but lets the daemon run.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
After previous patches, there's not much value in
chExtractVersion(). Rename chExtractVersionInfo() to
chExtractVersion() and have it use virCHDriver directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The only caller, chExtractVersion() passes not NULL. Therefore,
it's redundant to check for NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If chExtractVersionInfo() fails, in some cases it reports error
and in some it doesn't. Fix those places and drop reporting error
from chExtractVersion() which would just overwrite more specific
error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The <audio> element is configuring exclusively a backend, not a device.
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When the default driver mode requests the modular daemons, we still
defaulted to spawning libvirtd if the URI was NULL, because we don't
know which driver specific daemon to spawn. virtproxyd has logic
that can handle this as it is used for compatibility when accepting
incoming TCP connections with a NULL URI.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The "spawnDaemon" and "binary" parameters are co-dependant, with the
latter non-NULL, if-and-only-if the former is true. Getting rid of the
"spawnDaemon" parameter simplifies life for the callers and eliminates
an error checking scenario.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When deciding what socket to connect to, we build the daemon path
that we need to autostart. This path only needs to be populated
if we actually intend to use autostart.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The remoteGetUNIXSocket method currently just returns the daemon name
and the caller then converts this to a path. Except the SSH helper
didn't do this, so it was relying on later code expanding $PATH, and
this doesn't allow for build root overrides.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We have helper methods that return boolans for ro/user/autostart
properties. We then pack them into a flags parameter, and later
unpack them again. This makes the code consistently use flags
throughout.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This enum will shortly be used by the remote driver sockets helper
methods too.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The g_build_filename() would decide which separator
to use instead of hardcoding in g_strdup_printf().
Related issue: https://gitlab.com/libvirt/libvirt/-/issues/12
Signed-off-by: Luke Yue <lukedyue@gmail.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
In the previous commit I've changed what API is called from
'virsh setmem' command. However, since virsh-optparse test is ran
only when expensive tests are enabled I've completely missed that
the expected output for virsh-optparse test must be updated too
as it contains the API.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some of our really old APIs are missing @flags argument. We
introduced their variants with "Flags" suffix and wired some
logic into virsh to call the new variant only if necessary. This
enables virsh to talk to older daemon which may be lacking new
APIs.
However, in case of cmdSetmem() we are talking about v0.1.1
(virDomainSetMemory()) vs. v0.9.0 (virDomainSetMemoryFlags()) and
in case of cmdSetmaxmem() we are talking about v0.0.3
(virDomainSetMaxMemory()) vs v0.9.0 (virDomainSetMemoryFlags()).
Libvirt v0.9.0 was released more than 10 years ago and recently
we dropped support for RHEL-7 which has v4.5.0 (released ~3 years
ago). Thus it is not really necessary to have support in virsh
for such old daemons.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When processing node devices, the udevProcessStorage() will be
called if the device is some form of storage. In here, ID_TYPE
attribute is queried and depending on its value one of more
specialized helper functions is called. For instance, for
ID_TYPE=="cd" the udevProcessCDROM() is called, for
ID_TYPE=="disk" the udevProcessDisk() is called, and so on.
But there's a problem with ID_TYPE and its values. Coming from
udev, we are not guaranteed that ID_TYPE will contain "cd" for
CDROM devices. In fact, there's a rule installed by sg3_utils
that will overwrite ID_TYPE to "cd/dvd" leaving us with an
unhandled type. Fortunately, this was fixed in their upstream,
but there are still versions out there, on OS platforms that we
aim to support that contain the problematic rule. Therefore, we
should accept both strings.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1848875
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Let's use a different variable for storing retvals of helper
functions. This way the usual function pattern can be restored.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function can't fail really as it's returning 0 no matter
what. This is probably a residue from old days when we cared
about propagating OOM errors. Now we just abort. Make its return
type void then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function can't fail really as it's returning 0 no matter
what. This is probably a residue from old days when we cared
about propagating OOM errors. Now we just abort. Make its return
type void then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
libxl objects are supposed to be initialized and disposed. Adjust
libxlMakeNic to use an already initialized object owned by the caller.
Adjust libxlMakeNicList to initialize the list of objects, before they
are filled by libxlMakeNic. The libxl_domain_config object passed to
libxlMakeNicList is owned by the caller and will be disposed with
libxl_domain_config_dispose, which also disposes embedded objects such
as libxl_device_nic.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Olaf Hering <olaf@aepfle.de>
Before the mentioned commit we always parsed the whole disk definition
for qemuDomainBlockCopy API but we only used the @src part. Based on
that assumption the code was changed to parse only the disk <source>
element.
Unfortunately that is not correct as we need to parse some parts of
<driver> element as well.
Fixes: 0202467c4b
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Attribute `type` and sub-element `metadata_cache` are internally stored
in the `virStorageSource` structure. Sometimes we only care about the
disk source bits so we need a dedicated helper for that.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These checks look different than most similar ones for no
particular reason.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Match the behavior of most other features.
This will result in a change in behavior, because profiles will
now be installed whenever AppArmor support is enabled; on the
other hand, this is probably the behavior users expected in the
first place.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>