This flag tells backend not to create instance
disks making behavior the same as in qemu driver.
Disk files have to be created beforehand on target
host manually or by upper management layer i.e.
OpenStack Nova.
Signed-off-by: Pavel Glushchak <pglushchak@virtuozzo.com>
This reverts commit 3a6cf6fc16.
Mistakenly this commit was pushed because I thought I missed the
corret one b880ff42dd while in fact I didn't.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
New line character in name of domain is now forbidden because it
mess virsh output and can be confusing for users.
Validation of name is done in drivers, after parsing XML to avoid
problems with dissappeared domains which was already created with
new-line char in name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
dom xml generated on begin step should be passed
to perform step in VIR_MIGRATE_PARAM_DEST_XML parameter.
Otherwise 'XML error: failed to parse xml document' is
raised on destination host as dom xml is NULL.
Signed-off-by: Pavel Glushchak <pglushchak@virtuozzo.com>
Recently, libprlsdk got a separate flag PNA_BRIDGE corresponding to
type=bridge libvirt network interfaces. Let's use it and get rid of
all workarounds previously added to support it.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Change the virDomainChrDef to use a pointer to 'source' and allocate
that pointer during virDomainChrDefNew.
This has tremendous "fallout" in the rest of the code which mainly
has to change source.$field to source->$field.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Absent driver name attribute is invalid xml. Which in turn makes
unusable 'virsh edit' for example. The value does not make
much sense and ignored on input so nobody will hurt.
vz sdk supports setting serial number only for disk devices.
Getting serial upon cdrom(for example) is error however
setting is just ignored. Let's check for disk device
explicitly for clarity in both cases.
Setting serial number for other devices is ignored
with an info note just as before.
We need usual conversion from "" to NULL in direction
vz sdk -> libvirt, because "" is not valid for libvirt
and "" means unspecifiend in vz sdk which is NULL for libvirt.
Modeled after the qemuDomainHostdevPrivatePtr (commit id '27726d8c'),
create a privateData pointer in the _virDomainChardevDef to allow storage
of private data for a hypervisor in order to at least temporarily store
secret data for usage during qemuBuildCommandLine.
NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the secret data, there's no need to add code
code to handle this new structure there.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Just like virDomainDefPostParseCallback has gained new
parseOpaque argument, we need to follow the logic with
virDomainDeviceDefPostParse.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some callers might want to pass yet another pointer to opaque
data to post parse callbacks. The driver generic one is not
enough because two threads executing post parse callback might
want to see different data (e.g. domain object pointer that
domain def belongs to).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While dettaching/attaching device in OpenStack, nova
calls vzDomainDettachDevice twice, because the update of the internal
configuration of the ct comes a bit latter than the update event.
As the result, we suffer from the second call to dettach the same device.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
libvirt-python passes parameter bandwidth = 0
by default. This means that bandwidth is unlimited.
VZ driver doesn't support bandwidth rate limiting,
but we still need to handle it and fail if bandwidth > 0.
Signed-off-by: Pavel Glushchak <pglushchak@virtuozzo.com>
* Added VIR_MIGRATE_LIVE, VIR_MIGRATE_UNDEFINE_SOURCE and
VIR_MIGRATE_PERSIST_DEST to supported migration flags
Signed-off-by: Pavel Glushchak <pglushchak@virtuozzo.com>
vzDomainMigrateConfirm3Params is whitelisted. Otherwise we need to
move removing domain from domain list from perform to confirm
step. This would further imply adding a flag and check that migration
is in progress to prohibit mistakenly (maliciously) removing domains
on confirm step. vz version of p2p also need to be fixed to include confirm step.
One would also need to add means to cleanup pending migration
on client disconnect as now is has state across several API
calls.
On the other hand current version of confirm step is totaly
harmless thus it is easier to whitelist it at the moment.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
ACL check on perform step should be in API call itself to make ACL
checking script pass. Thus we need to reorganize code to obtain
domain object in perform API itself. Most of this is straight
forward, the only nuance is dropping locks on lengthy remote
operations.
The other motivation is to have only perform step ACL checks for
p2p migration instead of both begin in perform if we can leave
ACL check in vzDomainMigratePerformStep.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
We need it to prepare the calls for ACL checks otherwise ACL checking
script will fail.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
This action deserves its own function and makes main API call
structure much cleaner.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The original motivation is to expand API calls like start/stop etc so that
the ACL checks could be added. But this patch has its own befenits.
1. functions like prlsdkStart/Stop use common routine to wait for
job without domain lock. They become more self contained and do
not return intermediate PRL_RESULT.
2. vzDomainManagedSave do not update cache twice.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This patch fixes a bug which occurs when we check a bus and unit number
for a new attached disk. We should do this check in ValidadionCallback,
not in PostParse callback. Because in PostParse we have not initialized
disk->info.addr.drive struct yet.
Move part of code from domainPostParseCallback to domainValidateCallback
and part from devicesPostParseCallback to deviceValidateCallback.
PostParse callbacks are for modification data.
ValidateCallbacks are only for checks.
While dettaching/attaching device in OpenStack, nova
calls vzDomainDettachDevice twice, because the update of the internal
configuration of the ct comes a bit latter than the update event.
As the result, we suffer from the second call to dettach the same device.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
If we are going to ignore return value of a functions
that can raise an error, it's not enough to use ignore_value
construction. We should explicitly call virResetLastError
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
First, make function logPrlEventErrorHelper be void and only
print information (if any) from an event.
Second, don't rewrite original error with any errors we get
during parsing event info.
Third, ignore PRL_ERR_NO_DATA at all.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Unfortunately vz sdk do not provide detail information on migration
progress, only progress percentage. Thus vz driver provides percents
instead of bytes in data fields of virDomainJobInfoPtr.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Undefine procedure drops domain lock while waiting for detaching
disks vz sdk call. Meanwhile vz sdk event domain-config-changed
arrives, its handler finds domain and is blocked waiting for job
condition. After undefine API call finishes event processing procedes
and tries to refreshes domain config thru existing vz sdk domain handle.
Domain does not exists anymore and event processing fails. Everything
is fine we just don't want to see error message in log for this
particular case.
Fortunately domain has flag that domain is removed from list. This
also imply that vz sdk domain is also undefined. Thus if we check
for this flag right after domain is locked again on accuiring
job condition we gracefully handle this situation.
Actually the race can happen in other situations too. Any
time we wait for job condition in mutualy exclusive job in
time when we acquire it vz sdk domain can cease to exist.
So instead of general internal error we can return domain
not found which is easier to handle. We don't need to patch
other places in mutually exclusive jobs where domain lock
is dropped as if job is started domain can't be undefine
by mutually exclusive undefine job.
The code of this patch is quite similar to qemu driver checks
for is domain is active after acquiring a job. The difference
only while qemu domain is operational while process is active
vz domain is operational while domain exists.
Current vz driver implementation is not usable when it comes to
long runnig operations. Migration or saving a domain blocks all
other operations even query ones which are expecteted to be available.
This patch addresses this problem.
All vz driver API calls fall into next 3 groups:
1. only query domain cache (virDomainObj, vz cache statistic)
examples are vzDomainGetState, vzDomainGetXMLDesc etc.
2. use thread shared sdkdom object
examples are vzDomainSetMemoryFlags, vzDomainAttachDevice etc.
3. use no thread shared sdkdom object nor domain cache
examples are vzDomainSnapshotListNames, vzDomainSnapshotGetXMLDesc etc
API calls from group 1 don't need to be changed as they hold domain lock only
for short period of time. These calls [1] are easily distinguished. They query
domain object thru libvirt common code or query vz sdk statistics handle thru
vz sdk sync operations.
vzDomainInterfaceStats is the only exception. It uses sdkdom object to
convert interface name to its vz sdk stack index which could not be saved in
domain cache. Interface statistics is available thru this stack index as a key
rather than name. As a result we can have accidental 'not known interface'
errors on quering intrerface stats. The reason is that in the process of
updating domain configuration we drop all devices and then recreate them again
in sdkdom object and domain lock can be dropped meanwhile (to remove networks
for existing bridged interfaces and(or) (re)create new ones). We can fix this
by changing the way we support bridged interfaces or by reordering operations
and changing bridged networks beforehand. Anyway this is better than moving
this API call into 2 group and making it an exclusive job.
As to API calls from group 2, first thread shared sdkdom object needs to be
explained. vz sdk has only one handle for a given domain, thus threads need
exclusive access to operate on it. These calls are fixed to drop and reacquire
domain lock on any lengthy operations - namely waiting the result of async vz
sdk operation. As lock is dropped we need to take extra reference to domain
object if it is not taken already as domain object can be deleted from list
while lock is dropped. As this operations use thread shared sdkdom object, the
simplest way to make calls from group 2 be consistent to each other is to make
them mutually exclusive. This is done by taking/releasing job condition thru
calling correspondent job routine. This approach makes group 1 and group
2 calls consistent to each other too. Not all calls of group 2 change the
domain cache but those that do update it thru prlsdkUpdateDomain which holds
the lock thoughout the update.
API calls from group [2] are easily distinguished too. They use
beginEdit/commit to change domain configuration (vzDomainSetMemoryFlags) or/and
update domain cache from sdkdom at the end of operation (vzDomainSuspend).
There is a known issue however. Frankly speaking it was introduced by ealier
patch '[PATCH 6/9] vz: cleanup loading domain code' from a different series.
The patch significantly reduced amount of time when the driver lock is held when
creating domain from API call or as a result of domain added event from vz sdk.
The problem is these two paths race on using thread shared sdkdom as we don't
have libvirt domain object and can not lock on it. However this don't
invalidates the patch as we can't use the former approach of preadding domain
into the list as we need name at least and name is not given by event. Anyway
i'm against adding half baked object into the list. Eventually this race can be
fixed by extra measures. As to current situation races with different
configurations are unlikely and race when adding domain thru vz driver and
simultaneous event from vz sdk is not dangerous as configuration is the same.
The last group [3] is API calls that need only sdkdom object to make vz sdk
call and don't change thread shared sdkdom object or domain cache in any way.
For now these are mostly domain snapshot API calls. The changes are similar to
those of group 2 - they add extra reference and drop/reacquire the lock on waiting
vz async call result. One can simply take the immutable sdkdom object from the
cache and drop the lock for the rest of operations but the chosen approach
makes implementation of these API calls somewhat similar to those of from group
2 and thus a bit futureproof. As calls of group 3 don't need vz driver
domain/vz sdk cache in any way, they are consistent with respect to API calls from
groups 1 and 3.
There is another exception. Calls to make-snapshot/revert-to-snapshot/migrate
are moved to group 2. That is they are made mutually exclusive. The reason
is that libvirt API supports control/query only for one job per domain and
these are jobs that are likely to be queried/aborted.
Appendix.
[1] API calls that only query domain cache.
(marked [*] are included for a different reason)
.domainLookupByID = vzDomainLookupByID, /* 0.10.0 */
.domainLookupByUUID = vzDomainLookupByUUID, /* 0.10.0 */
.domainLookupByName = vzDomainLookupByName, /* 0.10.0 */
.domainGetOSType = vzDomainGetOSType, /* 0.10.0 */
.domainGetInfo = vzDomainGetInfo, /* 0.10.0 */
.domainGetState = vzDomainGetState, /* 0.10.0 */
.domainGetXMLDesc = vzDomainGetXMLDesc, /* 0.10.0 */
.domainIsPersistent = vzDomainIsPersistent, /* 0.10.0 */
.domainGetAutostart = vzDomainGetAutostart, /* 0.10.0 */
.domainGetVcpus = vzDomainGetVcpus, /* 1.2.6 */
.domainIsActive = vzDomainIsActive, /* 1.2.10 */
.domainIsUpdated = vzDomainIsUpdated, /* 1.2.21 */
.domainGetVcpusFlags = vzDomainGetVcpusFlags, /* 1.2.21 */
.domainGetMaxVcpus = vzDomainGetMaxVcpus, /* 1.2.21 */
.domainHasManagedSaveImage = vzDomainHasManagedSaveImage, /* 1.2.13 */
.domainGetMaxMemory = vzDomainGetMaxMemory, /* 1.2.15 */
.domainBlockStats = vzDomainBlockStats, /* 1.2.17 */
.domainBlockStatsFlags = vzDomainBlockStatsFlags, /* 1.2.17 */
.domainInterfaceStats = vzDomainInterfaceStats, /* 1.2.17 */ [*]
.domainMemoryStats = vzDomainMemoryStats, /* 1.2.17 */
.domainMigrateBegin3Params = vzDomainMigrateBegin3Params, /* 1.3.5 */
.domainMigrateConfirm3Params = vzDomainMigrateConfirm3Params, /* 1.3.5 */
[2] API calls that use thread shared sdkdom object
(marked [*] are included for a different reason)
.domainSuspend = vzDomainSuspend, /* 0.10.0 */
.domainResume = vzDomainResume, /* 0.10.0 */
.domainDestroy = vzDomainDestroy, /* 0.10.0 */
.domainShutdown = vzDomainShutdown, /* 0.10.0 */
.domainCreate = vzDomainCreate, /* 0.10.0 */
.domainCreateWithFlags = vzDomainCreateWithFlags, /* 1.2.10 */
.domainReboot = vzDomainReboot, /* 1.3.0 */
.domainDefineXML = vzDomainDefineXML, /* 0.10.0 */
.domainDefineXMLFlags = vzDomainDefineXMLFlags, /* 1.2.12 */ (update part)
.domainUndefine = vzDomainUndefine, /* 1.2.10 */
.domainAttachDevice = vzDomainAttachDevice, /* 1.2.15 */
.domainAttachDeviceFlags = vzDomainAttachDeviceFlags, /* 1.2.15 */
.domainDetachDevice = vzDomainDetachDevice, /* 1.2.15 */
.domainDetachDeviceFlags = vzDomainDetachDeviceFlags, /* 1.2.15 */
.domainSetUserPassword = vzDomainSetUserPassword, /* 1.3.6 */
.domainManagedSave = vzDomainManagedSave, /* 1.2.14 */
.domainSetMemoryFlags = vzDomainSetMemoryFlags, /* 1.3.4 */
.domainSetMemory = vzDomainSetMemory, /* 1.3.4 */
.domainRevertToSnapshot = vzDomainRevertToSnapshot, /* 1.3.5 */ [*]
.domainSnapshotCreateXML = vzDomainSnapshotCreateXML, /* 1.3.5 */ [*]
.domainMigratePerform3Params = vzDomainMigratePerform3Params, /* 1.3.5 */ [*]
.domainUpdateDeviceFlags = vzDomainUpdateDeviceFlags, /* 2.0.0 */
prlsdkHandleVmConfigEvent
[3] API calls that do not use thread shared sdkdom object
.domainManagedSaveRemove = vzDomainManagedSaveRemove, /* 1.2.14 */
.domainSnapshotNum = vzDomainSnapshotNum, /* 1.3.5 */
.domainSnapshotListNames = vzDomainSnapshotListNames, /* 1.3.5 */
.domainListAllSnapshots = vzDomainListAllSnapshots, /* 1.3.5 */
.domainSnapshotGetXMLDesc = vzDomainSnapshotGetXMLDesc, /* 1.3.5 */
.domainSnapshotNumChildren = vzDomainSnapshotNumChildren, /* 1.3.5 */
.domainSnapshotListChildrenNames = vzDomainSnapshotListChildrenNames, /* 1.3.5 */
.domainSnapshotListAllChildren = vzDomainSnapshotListAllChildren, /* 1.3.5 */
.domainSnapshotLookupByName = vzDomainSnapshotLookupByName, /* 1.3.5 */
.domainHasCurrentSnapshot = vzDomainHasCurrentSnapshot, /* 1.3.5 */
.domainSnapshotGetParent = vzDomainSnapshotGetParent, /* 1.3.5 */
.domainSnapshotCurrent = vzDomainSnapshotCurrent, /* 1.3.5 */
.domainSnapshotIsCurrent = vzDomainSnapshotIsCurrent, /* 1.3.5 */
.domainSnapshotHasMetadata = vzDomainSnapshotHasMetadata, /* 1.3.5 */
.domainSnapshotDelete = vzDomainSnapshotDelete, /* 1.3.5 */
[4] Known issues.
1. accidental errors on getting network statistics
2. race with simultaneous use of thread shared domain object on paths
of adding domain thru API and adding domain on vz sdk domain added event.
sdk domain handle is unique per connection so there is
no sense to query it again if we have it in vzDomObjPtr.
Side effect of prlsdkSdkDomainLookupByUUID is refreshing
domain config is of no use too as PrlVm_BeginEdit do it too.
vz supports only a subset of tcp and udp parameters.
1. tcp type supports only 'raw' protocol.
2. udp type supports only same parameters of 'host' and 'service'
for 'bind' and 'connect'.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
After domain is in the domains list let's keep it there. This
is approach taken by qemu driver and vz vzDomainMigrateFinish3Params too.
It quite reasonable, driver domain object is fully constructed and
can be discovered by client later.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
9c14a9ab introduced vzNewDomain function to enlist libvirt domain
object before actually creating vz sdk domain. Fix should fix
race on same vz sdk domain added event where libvirt domain object is
enlisted too. But later eb5e9c1e added locked checks for
adding livirtd domain object to list on vz sdk domain added event.
Thus now approach of 9c14a9ab is unnecessary complicated.
See we have otherwise unuseful prlsdkGetDomainIds function only
to create minimal domain definition to create libvirt domain object.
Also vzNewDomain is difficult to use as it creates partially
constructed domain object.
Let's move back to original approach where prlsdkLoadDomain do
all the necessary job. Another benefit is that we can now
take driver lock for bare minimum and in single place. Reducing
locking time have small disadvatage of double parsing on race
conditions which is typical if domain is added thru vz driver.
Well we have this double parse inevitably with current vz sdk api
on any domain updates so i would not take it here seriously.
Performance events subscribtion is done before locked check and
therefore could be done twice on races but this is not the problem.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Vz containers are able to use ploop volumes from storage pools
to work upon.
To use filesystem type volume, pool name and volume name should be
specifaed in <source> :
<filesystem type='volume' accessmode='passthrough'>
<driver type='ploop' format='ploop'/>
<source pool='guest_images' volume='TEST_POOL_CT'/>
<target dir='/'/>
</filesystem>
The information about pool and volume is stored in ct dom configuration:
<StorageURL>libvirt://localhost/pool_name/vol_name</StorageURL>
and can be easily obtained via PrlVmDevHd_GetStorageURL sdk call.
The only shorcoming: if storage pool is moved somewhere the ct
should be redefined in order to refresh the information aboot path
to root.hdd
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
We do not need to check domainf fs type there,
because it is done in prlsdkCheckUnsupportedParams.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Adding domain to domain list on preparation step is not correct.
First domain is not fully constructed - domain definition is
missing. Second we can't use VIR_MIGRATE_PARAM_DEST_XML parameter
to parse definition as vz sdk can patch it by itself. Let's add/remove
domain on finish step. This is for synchronization purpose only so domain
is present/absent on destination after migration completion. Actually
domain object will probably be created right after actual vz sdk
migration start by vz sdk domain defined event.
We can not and should not sync domain cache on error path in finish step
of migration. We can not as we really don't know what is the reason of
cancelling and we should not as user should not make assumptions on
state on error path. What we should do is cleaning up temporary migration
state that is induced on prepare step but we don't have one. Thus
cancellation should be noop.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
libvirt domain defined event is issued only on correspondent vz sdk
event. But in case event delivered before domain is added to
domain list we can mistakenly skip this event if prlsdkNewDomainByHandle
return NULL in case of domain is discovered in the list under
the driver lock. Let's return domain object in this case.
Now prlsdkNewDomainByHandle returns NULL only in case of
error which is more convinient.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The first version of migration cookie was rather dumb resulting
in passing empty or unused fields here and there. Add flags to
specify what to bake to and eat from cookie so we deal only
with meaningful data. However for backwards compatibility
we still need to pass at least some faked fields sometimes.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Allow to store driver specific data on a per-vcpu basis.
Move of the virDomainDef*Vcpus* functions was necessary as
virDomainXMLOptionPtr was declared below this block and I didn't want to
split the function headers.
We need this because apply graphics functions is used on
update too. Also in case of NULL address resolve it to default
instead of error.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Move graphic device config to post parse. This way we
detect error on early stage and leverage checking on detach too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
First we need to always set value to vz sdk parameter so
we can leverage setting code for device updates. This patch
resolves tristate default to off implicitly. This is easier
then extract default value from vz sdk itself. First current
default is off too, second this approach is already taken
for 'net->linkstate'.
Second dump this option in domain xml.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Current code that pass gateways to vz sdk is not suitable for
updates. If update has no gateways while we had them before
we need to pass "" for vz sdk gateways to reset old value.
The code definitely deserves its own function.
Drop checks that skip setting gateways if network address
is not set. Such a configuration is possible in vz sdk.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
This is as easy as moving disks checks from domain post
parse callback to device post parse callback.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Attach/detach functions for disk/net are quite trivial and
typically call a few functions in begin/end edit frame. Having
in mind update function too adding configuring for another
device (like graphics) will introduce 3 trivial functions more.
Let's replace current approach by attach/detach functions for
device.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Current implementation works with hard disks only. This patch
adds support for any disk device (cdroms and hdds right now).
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This code was added as a part of huge patch that moves driver
from working with prlctl to vz sdk so there is no good explanation
why this is done this way. The problem that it is not correct.
vz sdk cache mode parameter affects all domain disks while this hunk
resets its on every disk to a new value.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
As it turned out PrlVmDev_GetStackIndex can return negative values
without reporting an error, which is incorrect but nevertheless.
After that we feed this negative index to virIndexToDiskName,
which in turn returns NULL and we set it to virDomainDiskDef.dst.
Using virDiskNameToBusDeviceIndex with a virDomainDiskDef structure
which has NULL dst field crashes.
Fix this by returning an error in prlsdkGetDiskId in such cases.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
The approach of subscribing on first stat API call and then waiting
for receiving of performance event from sdk to process the call originates
in times when every vz libvirt connections spawns its own sdk connection.
Thus without this waiting virsh stat call would return empty stats. Now
with single sdk connection this scheme is unnecessary complicated.
This patch subscribes to performance events on first domain appearence
and unsubscribe on its removing.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
In preparation for moving all the CPU related APIs out of
the nodeinfo file, give them a virHostCPU name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In preparation for moving all the memory related APIs out of
the nodeinfo file, give them a virHostMem name prefix.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Nearly all the methods in the nodeinfo file are given a
'const char *sysfs_prefix' parameter to override the
default sysfs path (/sys/devices/system). Every single
caller passes in NULL for this, except one use in the
unit tests. Furthermore this parameter is totally
Linux-specific, when the APIs are intended to be cross
platform portable.
This removes the sysfs_prefix parameter and instead gives
a new method linuxNodeInfoSetSysFSSystemPath for use by
the test suite.
For two of the methods this hardcodes use of the constant
SYSFS_SYSTEM_PATH, since the test suite does not need to
override the path for thos methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
VNC graphics already supports sockets but only via 'socket' attribute.
This patch coverts that attribute into listen type 'socket'.
For backward compatibility we need to handle listen type 'socket' and 'socket'
attribute properly to support old XMLs and new XMLs. If both are provided they
have to match, if only one of them is provided we need to be able to parse that
configuration too.
To not break migration back to old libvirt if the socket is provided by user we
need to generate migratable XML without the listen element and use only 'socket'
attribute.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The virConnectOpenInternal method opens the libvirt client
config file and uses it to resolve things like URI aliases.
There may be driver specific things that are useful to
store in the config file too, so rather than have them
re-parse the same file, pass the virConfPtr down to the
drivers.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Similarly to the domain definition validator add a device validator. The
change to the prototype of the domain validator is necessary as
virDomainDeviceInfoIterateInternal requires a non-const pointer.
If try to stop VM or container which is already stopped than
Virtuozzo 7 returns code PRL_ERR_INVALID_ACTION_REQUESTED.
Error code PRL_ERR_DISP_VM_IS_NOT_STARTED is used in Virtuozzo 6
vz puts uuids into curly braces. Simply introduce new contstant to reflect this
and get rid of magic +2 in code.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Peer to peer migration is implemented just as in managed case. Basically
it is copy paste from managed case but with all the branches that are not
applied to vz removed.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The newest version of migration protocol - version 3 with parameters is implemented.
Supported flags is VIR_MIGRATE_PAUSED only. Supported parameters are
VIR_MIGRATE_PARAM_URI and VIR_MIGRATE_PARAM_DEST_NAME. VIR_MIGRATE_PARAM_DEST_XML
is in VZ_MIGRATION_PARAMETERS for technical onyl reasons.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This session uuid acts as authN token for different multihost vz operations one
of which is migration. Unfortunately we can't get it from server at any time
thus we need to save it at login.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
This solution does not keep snapshots cache because vz sdk lacks good support
for snapshot related events.
Libvirt and vz sdk has different approach to snapshot ids. vz sdk always
auto generate them while libvirt has ability to specify id by user.
Thus I have no other choice rather than simply ignore ids set by user
or generated by libvirt.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
SDK handles empty cdroms all right. We just need to
pass "" instead of NULL (not setting is good too).
However we can get problems here. Disk detaching treats source
as ids. Fortunately disk detaching is not supported for cdroms
yet and for hard disks we can not get empty source - this is prohibitited
by xml parsing code.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Current version of the function does not check format of cdroms at all.
At the same time prlsdkGetDiskInfo give hints that cdroms always
have format VIR_STORAGE_FILE_RAW. So fix vzCheckUnsupportedDisks.
About structure of checks. As we don't have means to store format
in SDK we always have only one format in every situation. So instead
of setting boolean let's get allowed format instead and finally compare
it to the requested. This structure of checks seems stable to me
because we have only one format in every situation.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
VIR_STORAGE_FILE_AUTO can not be set from xml description.
At the same time we don't set disks format to this value
as for example qemu does. Thus this we can never get this
value in format.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
If we want to delete all disks for container or vm
we should make a loop from 0 to NumberOfDisks and always
use zero index in PrlVmCfg_GetHardDisk to get disk handle.
When we delete first disk after that numbers of other disks
will be changed, start from 0 to NumberOfDisks-1.
That's why we should always use zero index.
We don't have input devices in SDK thus for define/dumpxml
operations to be consistent we need to:
1. on dumpxml: infer input devices from other parts of config.
It is already done in prlsdkLoadDomain.
2. on define: check that input devices are the same that
will be infer back on dumpxml operation.
The second part should be fixed.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
libvirt handles empty source as NULL, while vz sdk as
"" thus we need a bit of conversion.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Current implementation does not detect all incompatible configurations.
For example if we have in vzsdk bootorder "cdrom1, cdrom0" (that is
"hdb, hda" in case of ide cdroms) and cdroms do not have disk
images inserted. In this case boot order check code fails to
distiguish them at all as for both PrlVmDev_GetFriendlyName gives "".
Well the consequences are only missing warnings but as
we just have introduced all the necessary tools to face the problem -
let's fix it.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Actually using disk PrlVmDev_GetFriendlyName as id on
detaching volumes is not a problem. We can only detach
hard disks and these can not have empty friendly names.
But upcoming update device functionality for cdroms
can not use disk source as id at all as update operation
typically change this same source value. Thus we will need
to use cdrom bus and cdrom target name as cdrom id. So in attempt
to use same id scheme for all purpuses lets fix hard disk
detach function to use new id.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Our intention is to use disk bus and disk target name pair
as disk id instead of name returned by PrlVmDev_GetFriendlyName.
We already have the code that extracts this pair from vzsdk
data. Let's factor it out into a function.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Since vz driver is now lives as a part of daemon we can benefit from
this fact and allow vz clients to use shared drivers API like storage,
network, nwfilter etc.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
SDK does not allocate memory when getting strings thus we
need to call every function that returns string twice.
First to obtain string length, second to obtain string
itself. It is tedious so let's create helper functions
for cases when we know length of the result beforehand
and we are not.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
remove unnecessary vzConnectClose prototype and make
local structure vzDomainDefParserConfig be static
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We don't need them anymore as all pointers within vzDriver structure
are not changed during the time it exists.
Where we still need to synchronize we use virObjectLock/Unlock as far
as vzDriver is lockable object.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Lock driver when a new domain is created in prlsdkNewDomainByHandle
and try to find it in the list under lock again because it can race
with vzDomainDefineXMLFlags when a domain with the same uuid is added
via vz dispatcher directly and libvirt define.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This patch introduces a new 'vzDriver' lockable object and provides
helper functions to allocate/destroy it and we pass it to prlsdkXxx
functions instead of virConnectPtr.
Now we store domain related objects such as domain list, capabitilies
etc. within a single vz_driver vzDriver structure, which is shared by
all driver connections. It is allocated during daemon initialization or
in a lazy manner when a new connection to 'vz' driver is established.
When a connection to vz daemon drops, vzDestroyConnection is called,
which in turn relays disconnect event to all connection to 'vz' driver.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
GCC in RHEL-6 complains about listen:
../../src/conf/domain_conf.c:23718: error: declaration of 'listen' shadows a global declaration [-Wshadow]
/usr/include/sys/socket.h:204: error: shadowed declaration is here [-Wshadow]
This renames all the listen to gListen.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
No need to remember connection name and have corresponding
domain type to keep backward compatibility with former
'parallels' driver. It is enough to be able to accept 'parallels'
uri and domain types.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
we don't need to allocate macstr at all as it is an array
and already has the the space it needs.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Quite straigthforward as vz sdk memory setting function makes
just what we want to that is set "amount of physical memory
allocated to a domain".
'useflags' is introduced for non flag function implementation.
We can't just use combination of flags like "live | config" or
we fail for inactive domains. Other combinations have drawbacks
too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Actually this is not pure refactoring. Part of common code is
replaced with virDomainObjUpdateModificationImpact and this
a good replacement. It includes removed check of inactive
domain and active flags set. Additionally we resolve
current flag in accordance with current state of domain.
Thus it becames possible to attach/detach devices for
inactive domains if this flag is set.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
As usual we try to deal correctly with vz domains that were
created by other means and thus can have all range of SDK domain
parameters. If vz domain boot order can't be represented
in libvirt os boot section let's give warning and make os boot section
represent SDK to some extent.
1. Os boot section supports up to 4 boot devices. Here we just
cut SDK boot order up to this limit. Not too bad.
2. If there is a floppy in boot order let's just skip it.
Anyway we don't show it in the xml. Not too bad too.
3. SDK boot order with unsupported disks order. Say we have "hdb, hda" in
SDK. We can not present this thru os boot order. Well let's just
give warning but leave double <boot dev='hd'/> in xml. It's
kind of misleading but we warn you!
SDK boot order have an extra parameters 'inUse' and 'sequenceIndex'
which makes our task more complicated. In realitly however 'inUse'
is always on and 'sequenceIndex' is not less than 'boot position index'
which simplifies out task back again! To be on a safe side let's explicitly
check for this conditions!
We have another exercise here. We want to check for unrepresentable
condition 3 (see above). The tricky part is that in contrast to
domains defined thru this driver 3-rd party defined domains can
have device ordering different from default. Thus we need
some id to check that N-th boot disk of os boot section is same as
N-th boot disk of SDK boot. This is what prlsdkBootOrderCheck
for. It uses disks sources paths as id for disks and iface names
for network devices.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We want to report boot order in dumpxml for vz domains.
Thus we want disks devices to be sorted in output compatible with boot
ordering specification. So let's just use virDomainDiskInsert
which makes appropriate sorting.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The patch makes some refactoring of the existing code. Current boot order spec code
makes very simple thing in somewhat obscure way. In case of VMs
it sets the first hdd as the only bootable device. In case of CTs it
doesn't touch the boot order at all if one of the filesystems is mounted to root.
Otherwise like in case of VMs it sets the first hdd as the only bootable
device and additionally sets this device mount point to root. Refactored
code makes all this explicit.
The actual boot order support is simple. Common libvirt domain xml parsing
code makes the exact ordering of disks devices as described in docs
for boot ordering (disks are sorted by bus order first, device target
second. Bus order is the order of disk buses appearence in original
xml. Device targets order is alphabetical). We add devices in the
same order and SDK designates device indexes sequentially for each
device type. Thus device index is equal to its boot index. For
example N-th cdrom in boot specification refers to sdk cdrom with
it's device index N.
If there is no boot spec in xml the parsing code will add <boot dev='hdd'>
for HVMs automatically and we backward compatibly set fist hdd as
bootable.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
It's just a combination of AddImplicitControllers, and AddConsoleCompat.
Every caller that wants ImplicitControllers also wants the ConsoleCompat
AFAICT, so lump them together. We also need it for future patches.
We include the file in plenty of places. This is mostly due to
historical reasons. The only place that needs something from the
header file is storage_backend_fs which opens _PATH_MOUNTED. But
it gets the file included indirectly via mntent.h. At no other
place in our code we need _PATH_.*. Drop the include and
configure check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
