The output of cpuid depends on the logical processor id the process
runs on, as reflected by the "local apic id" present in cpuid leaves
(eax=1,ebx=0), (eax=11,ebx=0), and (eax=11,ebx=1). This produces
arbitrary changes in the output files that complicate comparisons.
This patch masks the occurences of the local apic id with 0x00, so
that two consecutive runs of "./cpu-data.py gather" produce identical
results.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Now that this function can be called regardless of interface type (and
whether or not we have a conn for the network driver), let's actually
call it for all interface types. This will assure that we re-connect
any disconnected bridge devices for <interface type='bridge'> as
mentioned in https://bugzilla.redhat.com/show_bug.cgi?id=1730084#c26
(until now we've only been reconnecting bridge devices for <interface
type='network'>)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The bridge reattach functionality in this function should be called
for interface types other than just type='network', so make it
callable for any type - it just becomes a NOP for types where no
action is needed.
In the case of <interface type='network'> we need to create a port in
the network driver, and for both type='network and type='bridge' we
need to reattach the bridge device (note that
virDomainNetGetActualBridgeName() gets the bridge name from the
appropriate (and different!) location for either type of interface).
All other interfaces currently require no action.
modifying callers of this function to actually call it for all
interface types is in the next patch. For now the behavior should be
identical pre and post-patch.
(NB: the conn argument can now legitimately be NULL, so we need to
change the ATTRIBUTE_NONNULL() directive for the function's
declaration - I noticed when making this change that argument 3 (the
NetDefPtr) could never be NULL, so I added ATTRIBUTE_NONNULL(3) while
removing ATTRIBUTE_NONNULL(1) (conn)).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>Reviewed-by: Michal Privoznik <mprivozn@redhat.com>#Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
dnsmasq usually prints out a version string like this:
Dnsmasq version 2.82 [...]
but a user reported that the build of dnsmasq included with pihole has
a version string like this:
Dnsmasq version pi-hole-2.81 [...]
We parse the dnsmasq version number to figure out if the dnsmasq
binary supports certain features. Since we expect the version number
(and it must be only numbers!) to start on the first non-space after
the string "Dnsmasq version", we fail to parse this format of the
version string.
Rather than spending a bunch of time trying to get pihole to change
that, we can just make our parsing more permissive - after searching
for "Dnsmasq version", we'll skip ahead to the first decimal digit,
rather than just the first non-space.
(NB: The features we're checking for purely by looking at version
number have been in all releases of dnsmasq since at least 2012, so we
could actually just remove the reading of the version number
completely. However it's possible (although *highly* unlikely)
that some new feature would be added to dnsmasq in the future and we
would need to add that code back.)
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/29
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This function skips over the beginning of a string until it reaches a
decimal digit (0-9) or the NULL at the end of the string. The original
pointer is modified in place (similar to virSkipSpaces()).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu's qcow2 driver allows control of the metadata cache of qcow2 driver
by the 'cache-size' property. Wire it up to the recently introduced
elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the domain config code it may be beneficial to control the
cache size of images introduced as snapshots into the backing chain.
Wire up handling of the 'metadata_cache' element.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In certain specific cases it might be beneficial to be able to control
the metadata caching of storage image format drivers of a hypervisor.
Introduce XML machinery to set the maximum size of the metadata cache
which will be used by qemu's qcow2 driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Unify the code with other places using virXMLFormatElement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable parsing of backing store strings containing the native 'nfs'
protocol specification.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Implement support for the 'nfs' native protocol driver in the qemu
driver.
QEMU accepts numeric UID/GID for 'nfs' protocol file driver thus libvirt
needs to perform the lookup prior to passing it to qemu.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add documentation and schema for the new disk transport protocol.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
'nfs_user'/'nfs_group' represents the XML configuration.
'nfs_uid'/'nfs_gid' is internal store when libvirt looks up the user's
uid/gid in the system.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Get rid of the 'cleanup' label and 'created' variable.
Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
It is now doing way more than gathering the CPU data from a host as the
other scripts were merged in it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
cpu-cpuid.py was merged into cpu-gather.py and the script can handle
multiple files so there's no need for a loop around it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Objects such as domain, pool, etc re-define the regex for the format.
Add more generic types for objects with/without a slash which we'll be
able to reuse also for other objects.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
New libxml2 handles '\n' properly so the literal newline is not
necessary, because 2.9.1 is the minimum version we support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'genericName' allows arbitrary numeric strings so using an explicit
'unsignedInt' choice is pointless. The elements take an username or a
uid which is prefixed by '+', both of which are covered by
'genericName'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use one variable per extracted property instead of reusing strings and
drop needless VIR_FREE calls.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to startup of the VM qemu doesn't like setting throttling for
an empty drive. Just skip it since we do the correct thing once new
media is inserted.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/117
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Han Han <hhan@redhat.com>
We create a new 'vm' so we must also fake the nodeset.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The monitor code uses 'flags' for the flags of the monitor builder,
while in this function it's a different set of flags. All callers pass a
variable named 'cdevflags', so rename the argument to suit.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
virJSONValueObjectRemoveKey can be used as direct replacement. Fix the
one caller and remove the duplicate function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove freeing/clearing of @props as the function doesn't guarantee that
it happens on success, rename the variable hodling copy of the alias and
use g_autofree to automatically free it and remove the cleanup label as
well as 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The callers of qemuMonitorAddObject rely on the fact that @alias is
filled only when the object is added successfully. This is documented
but the code didn't behave like that.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All callers of qemuMonitorJSONMakeCommandInternal will benefit from
making @arguments a double pointer and passing it to
virJSONValueObjectCreate directly which will clear it if it steals the
value.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Prepare for a refactor of qemuMonitorJSONMakeCommandInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing to remove the 'cleanup:' label and 'ret'
variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use automatic memory freeing and remove the 'cleanup' label and 'ret'
variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This allows simplification of the caller as well as will enable a later
refactor of qemuMonitorJSONMakeCommandInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The lookup didn't do anything apart from comparing the sysfs paths
anyway since that's what makes each mdev unique.
The most ridiculous usage of the old logic was in
virHostdevReAttachMediatedDevices where in order to drop an mdev
hostdev from the list of active devices we first had to create a new
mdev and use it in the lookup call. Why couldn't we have used the
hostdev directly? Because the hostdev and mdev structures are
incompatible.
The way mdevs are currently removed is via a write to a specific sysfs
attribute. If you do it while the machine which has the mdev assigned
is running, the write call may block (with a new enough kernel, with
older kernels it would return a write error!) until the device
is no longer in use which is when the QEMU process exits.
The interesting part here comes afterwards when we're cleaning up and
call virHostdevReAttachMediatedDevices. The domain doesn't exist
anymore, so the list of active hostdevs needs to be updated and the
respective hostdevs removed from the list, but remember we had to
create an mdev object in the memory in order to find it in the list
first which will fail because the write to sysfs had already removed
the mdev instance from the host system.
And so the next time you try to start the same domain you'll get:
"Requested operation is not valid: mediated device <path> is in use by
driver QEMU, domain <name>"
Fixes: https://gitlab.com/libvirt/libvirt/-/issues/119
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We set the pointer to some garbage packed structure data without
knowing whether we were actually handling the type of device we
expected to be handling. On its own, this was harmless, because we'd
never use the pointer as we'd skip the device if it were not the
expected type. However, it's better to make the logic even more
explicit - we first check the device and only when we're sure we have
the expected type we then update the pointer shortcut.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virDeviceHasPCIExpressLink() wasn't checking that pcie_cap_pos was
valid before attempting to use it, which could lead to reading the
byte at offset 0 + PCI_CAP_ID_EXP instead of [valid offset] +
PCI_CAP_ID_EXP. In particular, this could happen for "integrated" PCI
devices (those that are on the PCIe root complex). If it happened that
the byte from the wrong address had the "right" bit set, then it would
lead to us innappropriately believing that Express Link info was
available when it wasn't, and the node device driver would then log an
error like this:
virPCIDeviceGetLinkCapSta:2754 :
internal error: pci device 0000:00:18.0 is not a PCI-Express device
during a libvirtd restart. (this didn't ever occur until after
virPCIDeviceIsPCIExpress() was made more intelligent in commit
c00b6b1ae, which hasn't yet been in any official release)
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The two scenarios were found by Coverity after a seemingly-unrelated
change to virLXCProcessSetupInterfaceTap() (in commit ecfc2d5f43), and
explained by John Ferlan here:
https://www.redhat.com/archives/libvir-list/2020-December/msg00810.html
To re-explain:
a) On entry to virLXCProcessSetupInterfaceTap() if net->ifname != NULL
then a copy of net->ifname is made into parentVeth, and a reference
to *that* pointer is sent down to virNetDevVethCreate().
b) If parentVeth (aka net->ifname) is a template name (e.g. "blah%d"),
then virNetDevVethCreate() calls virNetDevGenerateName(), and if
virNetDevGenerateName() successfully generates a usable name
(e.g. "blah27") then it will free the original template string
(which is pointed to by net->ifname and by parentVeth), then
replace the pointer in parentVeth with a pointer to the new
string. Note that net->ifname still points to the now-freed
template string.
c) returning back up to virLXCProcessSetupInterfaceTap(), we check if
net->ifname == NULL - it *isn't* (still contains stale pointer to
template string), so we don't replace it with the pointer to the new
string that is in parentVeth.
d) Result: the new string is leaked once we return from
virLXCProcessSetupInterfaceTap(), while there is a dangling pointer
to the old string in net->ifname.
There is also a leak if there is a failure somewhere between steps (b)
and (c) above - the failure cleanup in virNetDevVethCreate() will only
free the newly-generated parentVeth string if the original pointer was
NULL (narrator: "It wasn't."). But it's a new string allocated by
virNetDevGenerateName(), not the original string from net->ifname, so
it really does need to be freed.
The solution is to make a copy of the entire original string into a
g_autofree pointer, then iff everything is successful we g_free() the
original net->ifname and replace it by stealing the string returned by
virNetDevVethCreate().
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
