Drop the checking of 'shared' from the ABI stability check. This
property controls whether the hypervisor allows concurrent access to the
same file, but this fact does not influence guest ABI.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Currently it is not used in backing chains and does not seem that we
will need to use it so return it back to the disk definition. Thankfully
most accesses are done via the accessors.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Replace direct usage of disk->src->driverName with the existing
accessors. The parser code where we assign the driver from XML is
intentionally not fixed to save an allocation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
There were two places where we'd check this independently. Move it to
the disk definition validation callback. This also fixes possible use of
NULL in a printf for network storage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
On Core i5 650 x86_64 kvm guest fail to start with error [1] for next cpu config:
<cpu mode='host-model' check='partial'>
<model fallback='allow'/>
<feature policy='require' name='x2apic'/>
</cpu>
The problem is in full CPU calculation in virQEMUCapsInitHostCPUModel.
It is supposed to include features emulated by qemu and missed on host. Some of
such features may be not included however.
For Core i5 650 host CPU is detected as Westmere and reported CPU as
SandyBridge. x2apic is missed on host and provided by installed qemu. The
feature is not mentioned in reported CPU features explicitly because SandyBridge
model include it. As a result full CPU does not include x2apic too.
Solution is to expand guest cpu features before updating fullCPU features.
[1] error: the CPU is incompatible with host CPU: \
Host CPU does not provide required features: x2apic
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a function named virDomainObjCheckIsActive in src/conf/domain_conf.c.
It calls virDomainObjIsActive, raises error if necessary and returns.
There is a lot of occurence of this pattern and it will save 3 lines on
each call.
Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that we have macro that does some checks lets forbid raw
usage of virClassNew() in favor of VIR_CLASS_NEW().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Our virObject code relies heavily on the fact that the first
member of the class struct is type of virObject (or some
derivation of if). Let's check for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far we are repeating the following lines over and over:
if (!(virSomeObjectClass = virClassNew(virClassForObject(),
"virSomeObject",
sizeof(virSomeObject),
virSomeObjectDispose)))
return -1;
While this works, it is impossible to do some checking. Firstly,
the class name (the 2nd argument) doesn't match the name in the
code in all cases (the 3rd argument). Secondly, the current style
is needlessly verbose. This commit turns example into following:
if (!(VIR_CLASS_NEW(virSomeObject,
virClassForObject)))
return -1;
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Whenever we declare a new object the first member of the struct
has to be virObject (or any other member of that family). Now, up
until now we did not care about the name of the struct member.
But lets unify it so that we can do some checks at compile time
later.
The unified name is 'parent'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In next patches this name will be needed for a different memeber.
Also, it makes sense to rename the variable because it does not
contain reference to parent device, just its name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Firstly, this isn't supposed to be in angle brackets because it's
not a system header file (not that gcc distinguishes these two,
it's just guide for us developers).
Secondly, no need to use util/ path prefix because CFLAGS already
contain -I$(srcdir)/util.
The include is needed because virmocklibxl is mocking
virFileMakePath() and even when VIR_MOCK_IMPL_RET_ARGS() does
forward declaration to shut up compiler we need real
virFileMakePath() declaration so that when it changes compiler
catches mismatching declarations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Check conversion of "cpuid" setting, check all supported policy settings
("1", "0", "x"). Also, check interaction with "nestedhvm" - should not
be included as "vmx=1" in "cpuid" setting.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Only "libxl" format supported for now. Special care needed around
vmx/svm, because those two are translated into "nestedhvm" setting.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Test enabling/disabling individual CPU features and also setting
nested HVM support, which is also controlled by CPU features node.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Convert CPU features policy into libxl cpuid policy settings. Use new
("libxl") syntax, which allow to enable/disable specific bits, using
host CPU as a base. For this reason, only "host-passthrough" mode is
accepted.
Libxl do not have distinction between "force" and "required" policy
(there is only "force") and also between "forbid" and "disable" (there
is only "disable"). So, merge them appropriately. If anything, "require"
and "forbid" should be enforced outside of specific driver.
Nested HVM (vmx and svm features) is handled separately, so exclude it
from translation.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will help with adding cpuid support.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce global libxl option for enabling nested HVM feature, similar
to kvm module parameter. This will prevent enabling experimental feature
by mere presence of <cpu mode='host-passthrough'> element in domain
config, unless explicitly enabled. <cpu mode='host-passthrough'> element
may be used to configure other features, like NUMA, or CPUID.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
When support for mode=custom will be added in the future, semantics of
current config will change. Reduce the surprise by emitting a warning.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Preparation for global nestedhvm configuration - libxlMakeDomBuildInfo
needs access to libxlDriverConfig.
No functional change.
Adjusting tests require slightly more mockup functions, because of
libxlDriverConfigNew() call.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
libxlDriverConfigNew() use libxlDriverConfigDispose() for cleanup in
case of errors. Do not call libxlLoggerFree() on not allocated logger
(NULL).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add comma escaping for loader->path and loader->nvram.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Add comma escaping for disk->vendor and disk->product when being
built for the command line (and not from hotplug).
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The vmware driver wants to execute vmware-vmx from the same directory in
which vmrun was found. However, on VMware Fusion 10 vmrun at
/Applications/VMware Fusion.app/Contents/Public/vmrun is a symlink
pointing to ../Library/vmrun. vmware-vmx cannot be found, as
it is not in PATH, but only in this Library directory.
Therefore, follow the vmrun symlink and use the resulting path. Then the
assumption that vmware-vmx is right next to it will still work.
Signed-off-by: Rainer Müller <raimue@codingfarm.de>
In order to not affect running VMs, refreshing the halted state
is only performed if QEMU supports the query-cpus-fast QAPI.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The s390 testcase verifies that the s390-specific cpu-state
field is correctly mapped to the halted property.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extract architecture specific data from query-cpus[-fast] if
available. A new function qemuMonitorJSONExtractCPUArchInfo()
can then call architecture-specific extraction handlers.
Initially, there's a handler for s390 cpu info to
set the halted property depending on the s390 cpu state
returned by QEMU. With this it's still possible to report
the halted condition even when using query-cpus-fast.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Extended the json monitor test program with support for query-cpus-fast
and added a sample file set for x86 data obtained using the it.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Use query-cpus-fast instead of query-cpus if supported by QEMU.
Based on the QEMU_CAPS_QUERY_CPUS_FAST capability.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Print out the halted property in the test output.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Detect whether QEMU supports the QMP query-cpus-fast API
and set QEMU_CAPS_QUERY_CPUS_FAST in this case.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1529256
If one of the virStorageVolLookupBy{Key|Name|Path} succeeds and
we have a @vol, then clear the last libvirt error; otherwise, a
subsequent "other" failure may cause vshReportError to erroneously
report the wrong error as well as a reported 'vshError' error that
caused the failure.
Signed-off-by: John Ferlan <jferlan@redhat.com>
If QEMU uses a seccomp blacklist (since 2.11), -sandbox on
no longer tries to whitelist all the calls, but uses sets
of blacklists:
default (always blacklisted with -sandbox on)
obsolete (defaults to deny)
elevateprivileges (setuid & co, default: allow)
spawn (fork & execve, default: allow)
resourcecontrol (setaffinity, setscheduler, default: allow)
If these are supported, default to sandbox with all four
categories blacklisted.
https://bugzilla.redhat.com/show_bug.cgi?id=1492597
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU commit 1bd6152 changed the default behavior from whitelist
to blacklist and introduced a few sets of system calls.
Use the 'elevateprivileges' parameter of -sandbox as a witness
of this change.
https://bugzilla.redhat.com/show_bug.cgi?id=1492597
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Exit early if possible to simplify the logic.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Move the building of -sandbox command line into a separate function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virCaps was used only to propagate the host architecture, so the
function can be extracted in a way which does not require it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>