By definition. Accordingly, filter them out when looking for
a read/write image.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
If the configuration explicitly requests a specific type of
firmware image, be it pflash or ROM, we should ignore all images
that are not of that type.
If no specific type has been requested, of course, any type is
considered a match and the selection will be based upon the
other attributes.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new test case covers the scenario in which the user
specifically asked for a read/write pflash image.
From the output files, we can see that the firmware selection
algorithm has picked a ROM image, which demonstrates the
presence of another bug. We're going to fix it with an upcoming
commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Sync with the edk2-20240524-4.fc39 package from Fedora.
The only notable change is that the inteltdx variant now declares
support for Secure Boot and is a ROM image instead of a stateless
pflash one.
The latter causes it to be considered eligible for the
configuration described by the firmware-auto-efi-rw test cases,
which now passes instead of failing.
Of course that doesn't make any sense, because a ROM image by
definition cannot be read/write. So this indicates the presence
of a bug in our firmware selection algorithm, which we're going
to address with an upcoming commit.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add an element to configure the rlimit nofile size:
...
<binary>
<rlimit_nofile size='122333'/>
</binary>
...
Non-positive values are forbidden in 'domaincommon.rng'. Added separate
test file, created by modifying the 'vhost-user-fs-fd-memory.xml'.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
So much can happen in the fileName field of the VMX that the easiest
thing is to silently report a serial type="null".
This effectively reverts commits de81bdb8d4cd and 62c53db0421a, but
keeps the test files to show the fix is still in place.
There is one instance where an error gets reset, but since that is a
rare case on its own and on top of that does not happen in any of our
long-running daemons with a logfile that might get monitored it should
be fine to leave it there.
Resolves: https://issues.redhat.com/browse/RHEL-32182
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This is supposed to unstuck FreeBSD as it switched to
Python-3.11.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This CPU feature can be used to explicitly enable or disable
support for pointer authentication. By default, it will be
enabled if the host supports it.
https://issues.redhat.com/browse/RHEL-7044
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recent commit v10.4.0-87-gd9935a5c4f made a reasonable change to only
reset beingDestroyed back to false when vm->def->id is reset to make
sure other code can detect a domain is (about to become) inactive. It
even added a comment saying any caller of qemuProcessBeginStopJob is
supposed to call qemuProcessStop to clear beingDestroyed. But not every
caller really does so because they first call qemuProcessBeginStopJob
and then check whether a domain is still running. If not the
qemuProcessStop call is skipped leaving beingDestroyed=true. In case of
a persistent domain this may block incoming migrations of such domain as
the migration code would think the domain died unexpectedly (even though
it's still running).
The qemuProcessBeginStopJob function is a wrapper around
virDomainObjBeginJob, but virDomainObjEndJob was used directly for
cleanup. This patch introduces a new qemuProcessEndStopJob wrapper
around virDomainObjEndJob to properly undo everything
qemuProcessBeginStopJob did.
https://issues.redhat.com/browse/RHEL-43309
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
If virt-host-validate is ran on a SEV-SNP capable machine, an
extra "PASS" is printed out. This is because
virHostValidateAMDSev() prints "PASS" and then returns 1
(indicating success) which in turn makes the caller
(virHostValidateSecureGuests()) print "PASS" again. Just drop the
extra printing in the caller and let virHostValidateAMDSev() do
all the printing.
Fixes: 1a8f646f29
Resolves: https://issues.redhat.com/browse/RHEL-46868
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Allow migration if the "migrate-precopy" capability is present or
libvirt is not the one running the virtiofs daemon.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Run the daemon with --print-capabilities first, to see what it supports.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now that we have a fake virtiofsd json descriptor in our vhost-user
test data, we can remove the explicitly specified binary and our
mocking will ensure this test won't be affected by the host state.
Also remove the locking options, since they were never supported
by the Rust version of virtiofsd.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the capabilities from the latest virtiofsd main branch and adjust
the order in the priority test accordingly.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As of now, libvirt supports few essential stats as
part of virDomainGetJobStats for Live Migration such
as memory transferred, dirty rate, number of iteration
etc. Currently it does not have support for the vfio
stats returned via QEMU. This patch adds support for that.
Signed-off-by: Kshitij Jha <kshitij.jha@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "modify" command allows to replace an existing record (its
text value). The primary key is the name of the record. If
duplicity or missing record detected, throw error.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-text record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "modify" command allows to replace an existing Srv record
(some of its elements respectively: port, priority and weight).
The primary key used to choose the modify record is the remaining
parameters, only one of them is required. Not using some of these
parameters may cause duplicate records and error message. This
logic is there because of the previous implementation (Add and
Delete options) in the function.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-Srv record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "modify" command allows you to replace an existing record
(its hostname, sub-elements). IP address acts as the primary key.
If it is not found, the attempt ends with an error message. If
the XML contains a duplicate address, it will select the last
one.
Tests in networkxml2xmlupdatetest.c contain replacements of an
existing DNS-Host record and failure due to non-existing record.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/639
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The outdated comment refers to a non-existent member in the
virDomainObj structure.
Signed-off-by: Adam Julis <ajulis@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When generating paths for a domain specific AppArmor profile each
path undergoes a validation where it's matched against an array
of well known prefixes (among other things). Now, for
OVMF/AAVMF/... images we have a list and some entries have
comments to which type of image the entry belongs to. For
instance:
"/usr/share/OVMF/", /* for OVMF images */
"/usr/share/AAVMF/", /* for AAVMF images */
But these comments are pretty useless. The path itself already
gives away the image type. Drop them.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
This commit removes the redundant call to qemuSecurityGetNested() in
qemuStateInitialize(). In qemuSecurityGetModel(), the first security manager
in the stack is already used by default, so this change helps to
simplify the code.
Signed-off-by: hongmianquan <hongmianquan@bytedance.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fix libvirtd hang since fork() was called while another thread had
security manager locked.
We have the stack security driver, which internally manages other security drivers,
just call them "top" and "nested".
We call virSecurityStackPreFork() to lock the top one, and it also locks
and then unlocks the nested drivers prior to fork. Then in qemuSecurityPostFork(),
it unlocks the top one, but not the nested ones. Thus, if one of the nested
drivers ("dac" or "selinux") is still locked, it will cause a deadlock. If we always
surround nested locks with top lock, it is always secure. Because we have got top lock
before fork child libvirtd.
However, it is not always the case in the current code, We discovered this case:
the nested list obtained through the qemuSecurityGetNested() will be locked directly
for subsequent use, such as in virQEMUDriverCreateCapabilities(), where the nested list
is locked using qemuSecurityGetDOI, but the top one is not locked beforehand.
The problem stack is as follows:
libvirtd thread1 libvirtd thread2 child libvirtd
| | |
| | |
virsh capabilities qemuProcessLanuch |
| | |
| lock top |
| | |
lock nested | |
| | |
| fork------------------->|(nested lock held by thread1)
| | |
| | |
unlock nested unlock top unlock top
|
|
qemuSecuritySetSocketLabel
|
|
lock nested (deadlock)
In this commit, we ensure that the top lock is acquired before the nested lock,
so during fork, it's not possible for another task to acquire the nested lock.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1303031
Signed-off-by: hongmianquan <hongmianquan@bytedance.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In a domain created with an interface with a <driver> subelement,
the device contains a non-NULL virDomainVirtioOptions struct, even
for non-virtio NIC models. The subelement need not be present again
after libvirt restarts, or when the interface is passed to clients.
When clients such as virsh domif-setlink put back the modified
interface XML, the new device's virtio attribute is NULL. This may
fail the equality checks for virtio options in qemuDomainChangeNet,
depending on whether libvird was restarted since define or not.
This patch modifies the check for non-virtio models, to ignore olddev
value of virtio (assumed valid), and to allow either NULL or a struct
with all values ABSENT in the new virtio options.
Signed-off-by: Miroslav Los <mirlos@cisco.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Similarly to commit 2482801608 we can safely ignore connectionId,
portId and portgroupId in both XML and VMX as they are only a blind
pass-through between XML and VMX and an ethernet without such parameters
was spotted in the wild. On top of that even our documentation says the
whole VMWare Distrubuted Switch configuration is a best-effort.
Resolves: https://issues.redhat.com/browse/RHEL-46099
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This wires up the emulator 'debug' parameter to control the
/usr/bin/swtpm 'level' parameter for logging.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Pick up some more of the qemu_driver.c code so this function supports
both CONFIG and LIVE updates.
Note that qemuDomainUpdateDeviceFlags() passed vm->def to
virDomainDeviceDefParse() for the VIR_DOMAIN_AFFECT_CONFIG case, which
is technically incorrect; in the test driver code we'll fix this.
Signed-off-by: John Levon <john.levon@nutanix.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
mem_nodes[i].ndistances is written outside the loop causing an out-of-bounds
write leading to heap corruption.
While we are at it, the entire cleanup portion can be removed as it can be
handled in virDomainNumaFree. One instance of VIR_FREE is also removed and
replaced with g_autofree.
This patch also adds a testcase which would be picked up by ASAN, if this
portion regresses.
Fixes: 742494eed8
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Under the test environment, driver->domainEventState is uninitialized. If a
disk gets dropped, it will attempt to queue an event which will cause a
segmentation fault. This crash does not occur during normal use.
This patch moves driver->domainEventState initialization from qemuhotplugtest
to qemuTestDriverInit in testutilsqemu (Credit goes to Michal Privoznik as he
had already provided the diff).
An additional test case is added to test dropping of disks with startupPolicy
set as optional.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Changing the postgroup attribute caused unexpected behavior.
Although it can be implemented, it has a non-trivial solution.
No requirement or use has yet been found for implementing this
feature, so it has been disabled for hot-plug.
Resolves: https://issues.redhat.com/browse/RHEL-7299
Signed-off-by: Adam Julis <ajulis@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current hostdev parsing logic sets rawio or sgio even if the hostdev type
is not 'scsi'. The rawio field in virDomainHostdevSubsysSCSI overlaps with
wwpn field in virDomainHostdevSubsysSCSIVHost, consequently setting a bogus
pointer value such as 0x1 or 0x2 from virDomainHostdevSubsysSCSIVHost's
point of view. This leads to a segmentation fault when it attempts to free
wwpn.
While setting sgio does not appear to crash, it shares the same flawed logic
as setting rawio.
Instead, we ensure these are set only after the hostdev type check succeeds.
This patch also adds two test cases to exercise both scenarios.
Fixes: bdb95b520c
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
