Legacy mode used to be needed for use with -drive, which was almost
completely deleted. We now have qemuxml2argvtest test cases checking a
few cases and the rest uses the modern mode only. Thus we don't need to
test the legacy mode any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Condition handling failure of the first virTestRun was lacking the 'ret
= -1' line thus the subsequent line was taken as it's body rendering the
first invocation useless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU deprecated and removed support for those protocols, but due to a
logic bug in the tests it was not caught. Remove the test cases first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v8.1.0-2161-ga95260486a
Notable changes:
- new CPU topology parameters: 'books', 'drawers'
- new migration parameter 'avail-switchover-bandwidth'
- new s390x CPU properties: 'dedicated', 'entitlement'
- new 'hostmem' parameter for 'virtio-gpu'
- new device 'piix4-isa'
- new property 'dynamic-memslots' of 'virtio-mem' device
- new 'gsi*' parameters of 'ICH9-LPC'
- new experimental 'x-south-bridge' machine option
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Test cases that depend on duplicating fds are using fairly big
values as targets.
This works fine on Linux, where RLIMIT_NOFILE is 1024 by
default, but fails on macOS which uses 256 as the default.
Decrease the values so that they're valid across all platforms.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Both tests pass a disk source definition which didn't go through the
preparation steps and thus contains only the target information that
were originally present, thus we should be using the
QEMU_BLOCK_STORAGE_SOURCE_BACKEND_PROPS_TARGET_ONLY flag.
For the same reason QEMU_BLOCK_STORAGE_SOURCE_BACKEND_PROPS_AUTO_READONLY
used in 'testJSONtoJSON' doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a few examples of SD cards backed with network storage to capture
the current state as the formatter code is about to be refactored.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test code cares mostly about the actual layer nodenames thus,
appropriate accessors are used.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Convert all places in tests to use the 'storage' layer nodename
accessors instead of (virStorageSource)->nodestorage.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use qemuBlockStorageSourceGetFormatProps as it formats the properties of
the 'format' driver in qemu. Adjust the comment which was hinting
otherwise.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the node name of the storage access driver to identify the block job
volumes. This will prepare the blockjob code for the possibility that the
format layer may be missing. Our lookup code can find either of them,
thus we can safely switch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Enable the flags in the status xml2xmtest and add an exaple to the test
data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that deleting and reverting external snapshots is implemented we can
report that in capabilities so management applications can use that
information and start using external snapshots.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
As of v9.4.0-rc2~5 it is possible to specify guest address where
a virtio-mem/virtio-pmem memory device is mapped to. What that
commit forgot to introduce was a check for overlaps.
And yes, this is technically an O(n^2) algorithm, as
virDomainMemoryDefValidate() is called over each memory device
and after this, virDomainMemoryDefValidate() also iterates over
each memory device. But given there's usually only a handful of
such devices, and this runs only when parsing domain XML I guess
code readability wins over some less obvious solution.
Resolves: https://issues.redhat.com/browse/RHEL-4452
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current message can be misleading, because it seems to suggest
that no firmware of the requested type is available on the system.
What actually happens most of the time, however, is that despite
having multiple firmwares of the right type to choose from, none
of them is suitable because of lacking some specific feature or
being incompatible with some setting that the user has explicitly
enabled.
Providing an error message that describes exactly the problem is
not feasible, since we would have to list each candidate along
with the reason why we rejected it, which would get out of hand
quickly.
As a small but hopefully helpful improvement over the current
situation, reword the error message to make it clearer that the
culprit is not necessarily the firmware type, but rather the
overall domain configuration.
Suggested-by: Michael Kjörling <7d1340278307@ewoof.net>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's not possible to use password-protected ssh keys directly with
libvirt because libvirt doesn't have any way to prompt a user for the
password. To accomodate password-protected key files, an administrator
can add these keys to an ssh agent and then configure the domain with
the path to the ssh-agent socket.
Note that this requires an administrator or management app to
configure the ssh-agent with an appropriate socket path and add the
necessary keys to it. In addition, it does not currently work with
selinux enabled. The ssh-agent socket would need a label that libvirt
would be allowed to access rather than unconfined_t.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, we can support logging in with
an ssh key file. Pass the path to the configured key file and the
username to the nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, use the configured value for
knownHosts and pass it to the nbdkit process.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For ssh disks that are served by nbdkit, lookup the password from the
configured secret and securely pass it to the nbdkit process using fd
passing.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Adds the ability to monitor the nbdkit process so that we can take
action in case the child exits unexpectedly.
When the nbdkit process exits, we pause the vm, restart nbdkit, and then
resume the vm. This allows the vm to continue working in the event of a
nbdkit failure.
Eventually we may want to generalize this functionality since we may
need something similar for e.g. qemu-storage-daemon, etc.
The process is monitored with the pidfd_open() syscall if it exists
(since linux 5.3). Otherwise it resorts to checking whether the process
is alive once a second. The one-second time period was chosen somewhat
arbitrarily.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We were testing the arguments that were being passed to qemu when a disk
was being served by nbdkit, but the arguments used to start nbdkit
itself were not testable. This adds a test to ensure that we're invoking
nbdkit correctly for various disk source definitions.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For virStorageSource objects that contain an nbdkitProcess, start that
nbdkit process to serve that network drive and then pass the nbdkit
socket to qemu rather than sending the network url to qemu directly.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add xml to the private data for a disk source to represent the nbdkit
process so that the state can be re-created if the libvirt daemon is
restarted. Format:
<nbdkit>
<pidfile>/path/to/nbdkit.pid</pidfile>
<socketfile>/path/to/nbdkit.socket</socketfile>
</nbdkit>
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add new DO_TEST_CAPS_LATEST_NBDKIT macro to test xml2argv for various
nbdkit capability scenarios.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There was support in the code for parsing protocol='ssh' on network disk
sources, but it was not present in the xml schema. Add this to the
schema.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Since commit 54257ed51b on S390x qemuxml2argvtest fails with the following errors:
144) QEMU XML-2-ARGV cpu-kvmclock.x86_64-latest ... libvirt: CPU Driver error : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
FAILED
2023-09-14 13:01:23.883+0000: 4113077: info : libvirt version: 9.8.0
2023-09-14 13:01:23.883+0000: 4113077: info : hostname: a46lp61.lnxne.boe
2023-09-14 13:01:23.883+0000: 4113077: error : virCPUx86Compare:1954 : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
1059) QEMU XML-2-ARGV cpu-check-partial.x86_64-latest ... libvirt: CPU Driver error : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
FAILED
2023-09-14 13:01:23.885+0000: 4113077: error : virCPUx86Compare:1954 : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
1064) QEMU XML-2-ARGV cpu-check-default-partial2.x86_64-latest ... libvirt: CPU Driver error : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
FAILED
2023-09-14 13:01:23.885+0000: 4113077: error : virCPUx86Compare:1954 : the CPU is incompatible with host CPU: Host CPU does not provide required features: monitor
3 tests failed.
Fixes: 54257ed51b
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Requires recent qemu with support for the virtio-blk-vhost-vdpa device
and the ability to pass a /dev/fdset/N path for the vdpa path (8.1.0)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1900770
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemuInterfaceVDPAConnect() was a helper function for connecting to the
vdpa device file. But in order to support other vdpa devices besides
network interfaces (e.g. vdpa block devices) make this function a bit
more generic.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Check whether the qemu binary supports the vdpa block driver. We can't
rely simply on the existence of the virtio-blk-vhost-vdpa block driver
since the first releases of qemu didn't support fd-passing for this
driver. So we have to check for the 'fdset' feature on the driver
object. This feature will be present in the qemu 8.1.0 release and was
merged to qemu in commit 98b126f5.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This was added in qemu commit 166b174188.
No additional features had to be added to libvirt.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now that all fake-caps testing was removed we can also remove the
filling of the fake caps by cpu models.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove all the code for adding fake machines into the testing capability
cache as we no longer have any machines in it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The status XML doesn't require any capabilities to be parsed and
formatted back. Remove all qemuCaps related code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that all tests were converted to use real capabilities we can drop
x86_64 from the tooling to create fake capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The rest of the test cases has no change in the output now that we've
assumed some flags.
Remove the fake-caps test macros after conversion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities, but select the fake 'Haswell' host CPU for test
stability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Previously without modern capabilities the test was relying on a CPU
model which was not entered into a fake list of supported cpus.
With real capabilities we have to pick a CPU model which is supported by
libvirt but in some version is not supported by qemu. I've picked
EPYC-Milan, which was introduced into qemu-6.0.
This test configures a CPU which is equivalent to EPYC-Rome by disabling
features from EPYC-Milan and uses a versioned real caps test to check it
against a qemu which doesn't support EPYC-Milan.
With real capabilities though, we can also do a positive test case by
using a version whic doesh support it. I've specifically not used the
LATEST caps so that it doesn't change once capabilities are bumped.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the fake Haswell processor definition and augment the list of
features to make the test pass.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use real capabilities, but select the fake 'Haswell' host CPU for test
stability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modernize all test cases which set 'Haswell' as the host cpu model.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modernize test cases using 'host-mode' cpu type, where the actual CPU
doesn't isn't important.
As using the host cpu from the 'latest' capabilities data would cause
test churn in case the host cpu changes in the future, convert them
using the overriden Haswell cpu.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the 'smp-dies' test case into 'cpu-topology4' and remove
unnecessary cruft.
Remove cpu definition from 'cpu-topology2' as it's not relevant to the
test case.
Remove 'smp' case as it's covered by the rest.
Use real capabilities for all of them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
As these were using DO_TEST_FULL the churn-reducing patches didn't
influence these.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since qemu-8.0 a new way to disable 'hpet' via -machine was added.
Properly test both branches with real capabilities.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume the features modern qemus have to bring the test data closer
to the 'latest' real-caps versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume the two features modern qemus have to bring the test data closer
to the 'latest' real-caps versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Assume the two features modern qemus have to bring the test data closer
to the 'latest' real-caps versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
