Starting from qemu 2.9, more granular options are supported. Add parser
for the relevant bits.
With this patch libvirt is able to parse the host and target IQN of from
the JSON pseudo-protocol specification.
This corresponds to BlockdevOptionsIscsi in qemu qapi.
'SocketAddress' structure was changed to contain 'inet' instead of
'tcp' since qemu commit c5f1ae3ae7b. Existing entries have a backward
compatibility layer.
Libvirt will parse 'inet' and 'tcp' as equivalents.
The same json strucutre is used for NBD and sheepdog volumes for
specifying of the host. Rename the function and fix up error messages to
be more universal.
Change the settings from qemuDomainUpdateDeviceLive() as otherwise the
call would succeed even though nothing has changed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1414627
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
With glibc >= 2.25.90 writev() is only available if you explicitly
include sys/uio.h. This matches the documented requirements, but
older glibc and other *NIX pulled in writev indirectly so the bug
wasn't noticed previously.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use ATTRIBUTE_FALLTHROUGH, introduced by commit
5d84f5961b8e28e802f600bb2d2c6903e219092e, instead of comments to
indicate that the fall through is an intentional behavior.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
This reverts commit 22b02f44920388534d3da65cc6f0a70714dcf075.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1459091
We try to get the last element of the passed path by calling
strrch(path, '/'). However, the pointer that strrchr() returns
points at the slash, We want string that starts right after that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's a problem with current streams after I switched them from
iohelper to thread implementation. Previously, iohelper made sure
not to exceed specified @length resulting in the pipe EOF
appearing at the exact right moment (the pipe was used to tunnel
the data from the iohelper to the daemon). Anyway, when switching
to thread I had to write the I/O code from scratch. Whilst doing
that I took an inspiration from the iohelper code, but since the
usage of pipe switched to slightly different meaning, there was
no 1:1 relationship between the codes.
Moreover, after introducing VIR_FDSTREAM_MSG_TYPE_HOLE, the
condition that should made sure we won't exceed @length was
completely wrong.
The fix is to:
a) account for holes for @length
b) cap not just data sections but holes too (if @length would be
exceeded)
For this purpose, the condition needs to be brought closer to the
code that handles holes and data sections.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The host address or the socket path have already been checked at the
begining of the function virStorageSourceParseNBDColonString(). So,
when the parameter is not a unix socket, there is no reason to check
the address again because if it does not exists, the logic will fail
in the first IF conditional.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
VIR_STRDUP returns -1 if the string copy was not successful. So, the
current comparison/logic is throwing an error when VIR_STRDUP() returns
1. Only when source is NULL, it is considering as a success which is
not right.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Callers expect the return value to be the total number of vcpus in the
host (including offline vcpus). The refactor in c67e04e25fa58104e0fae41
broke this assumption by using virHostCPUGetOnlineBitmap which only
creates a bitmap long enough to hold the last online vcpu.
Report the full number of host vcpus by returning value from
virHostCPUGetCount().
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
We will need some convenient helper functions for managing sysfs-entries
for fibre channel-backed devices. Let's implement them and make them
available in the private API.
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
The @ipv6_host allocated in virAsprintf may be lost when virAsprintf
addrstr failed.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Many vendor id's and product id's have leading zeros. We should show
them in the logs.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: Laine Stump <laine@laine.org>
@reply is a DBusMessage object returned by virDBusCallMethod in
get machine object call path, dereference it before calling
virDBusCallMethod again to get machine name.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some older systems (such as RHEL6) lack SEEK_HOLE and SEEK_DATA
which virFileInData relies on. Provide a stub for these systems.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, we don't assign any meaning to that. Our current view
on virStream is that it's merely a pipe. And pipes don't support
seeking.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit e3ba4025 introduced srv->handles and VIR_RESIZE_N to allocate
@handles as necessary, but did not free the handles during when calling
virNetlinkEventServiceStop.
Commit 15a71e60 introduced the virNetlinkEventServiceStopAll function, and
the code in virNetlinkEventServiceStop is copied to this function, so just
call virNetlinkEventServiceStop instead.
Namely, this patch is about virMediatedDeviceGetIOMMUGroup{Dev,Num}
functions. There's no compelling reason why these functions should take
an object, on the contrary, having to create an object every time one
needs to query the IOMMU group number, discarding the object afterwards,
seems odd.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Commit 8e09663 "pci: recognize/report GEN4 (PCIe 4.0) card 16GT/s Link
speed" introduced another speed into enum, but mistakenly also altered
field width, so one bit of link width was included there.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Basically, what is needed here is to introduce new message type
for the messages passed between the event loop callbacks and the
worker thread that does all the I/O. The idea is that instead of
a queue of read buffers we will have a queue where "hole of size
X" messages appear. That way the event loop callbacks can just
check the head of the queue and see if the worker thread is in
data or a hole section and how long the section is.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function takes a FD and determines whether the current
position is in data section or in a hole. In addition to that,
it also determines how much bytes are there remaining till the
current section ends.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
One big downside of using the pipe to transfer the data is that
we can really transfer just bare data. No metadata can be carried
through unless some formatted messages are introduced. That would
be quite painful to achieve so let's use a message queue. It's
fairly easy to exchange info between threads now that iohelper is
no longer used.
The reason why we cannot use the FD for plain files directly is
that despite us setting noblock flag on the FD, any
read()/write() blocks regardless (which is a show stopper since
those parts of the code are run from the event loop) and poll()
reports such FD as always readable/writable - even though the
subsequent operation might block.
The pipe is still not gone though. It is used to signal the event
loop that an event occurred (e.g. data is available for reading
in the queue, or vice versa).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The QEMU default is GICv2, and some of the code in libvirt
relies on the exact value. Stop pretending that's not the
case and use GICv2 explicitly where needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
The metadata libvirt cares about is identical for version 3
as for previous versions, so we merely need list the new
version number.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Simply tries to match the provided regex on a string and returns
the result. Useful if caller don't care about the matched substring
and want to just test if some pattern patches a string.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
GCC complains that inlining virStringTrimOptionalNewline is not
likely on some platforms:
cc1: warnings being treated as errors
../../src/util/virfile.c: In function 'virFileReadValueBitmap':
../../src/util/virstring.h:292: error: inlining failed in call to 'virStringTrimOptionalNewline': call is unlikely and code size would grow [-Winline]
../../src/util/virfile.c:3987: error: called from here [-Winline]
Inlining this function is not going to be a measurable performance
benefit either, since the time required to execute it is going to
be dominated by running of strlen() over the string, not by the
function call overhead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
It is no longer needed thanks to the great virfilewrapper.c. And this
way we don't have to add a new set of functions for each prefixed
path.
While on that, add two functions that weren't there before, string and
scaled integer reading ones. Also increase the length of the string
being read by one to accompany for the optional newline at the
end (i.e. change INT_STRLEN_BOUND to INT_BUFSIZE_BOUND).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So, because mingw is somehow OK with dereferencing a pointer within a
VIR_DEBUG macro, compared to outside of it to which it complained with a
"potential NULL pointer dereference" error (still a false positive), we
can make the code a tiny bit cleaner.
Sighed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
After bdcf6e481 there is a crasher in libvirt. The commit assumes
that priv->perf is always set. That is not true. For inactive
domains, the priv->perf is not allocated as it is set in
qemuProcessLaunch(). Now, usually we differentiate between
accesses to inactive and active definition and it works just
fine. Except for 'domstats'. There priv->perf is accessed without
prior check for domain inactivity. While we could check for that,
more robust solution is to make virPerfEventIsEnabled() accept
NULL.
How to reproduce:
1) ensure you have at least one inactive domain
2) virsh domstats
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
This patch fixes the following MinGW error (although actually being a
false positive):
../../src/util/virmdev.c: In function 'virMediatedDeviceListMarkDevices':
../../src/util/virmdev.c:453:21: error: potential null pointer
dereference [-Werror=null-dereference]
const char *mdev_path = mdev->path;
^~~~~~~~~
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The problem resides in virHostdevUpdateActiveMediatedDevices which gets
called during qemuProcessReconnect. The issue here is that
virMediatedDeviceListAdd takes a pointer to the item to be added to the
list to which VIR_APPEND_ELEMENT is used, which also clears the pointer.
However, in this case only the local copy of the pointer got cleared,
leaving the original pointing to valid memory. To sum it up, during
cleanup phase, the original pointer is freed and the daemon crashes
basically any time it would access it.
Backtrace:
0x00007ffff3ccdeba in __strcmp_sse2_unaligned
0x00007ffff72a444a in virMediatedDeviceListFindIndex
0x00007ffff7241446 in virHostdevReAttachMediatedDevices
0x00007fffc60215d9 in qemuHostdevReAttachMediatedDevices
0x00007fffc60216dc in qemuHostdevReAttachDomainDevices
0x00007fffc6046e6f in qemuProcessStop
0x00007fffc6091596 in processMonitorEOFEvent
0x00007fffc6091793 in qemuProcessEventHandler
0x00007ffff7294bf5 in virThreadPoolWorker
0x00007ffff7294184 in virThreadHelper
0x00007ffff3fdc3c4 in start_thread () from /lib64/libpthread.so.0
0x00007ffff3d269cf in clone () from /lib64/libc.so.6
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1446455
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Use a local variable to hold data, rather than accessing the pointer
after calling virMediatedDeviceListAdd (therefore VIR_APPEND_ELEMENT).
Although not causing an issue at the moment, this change is a necessary
prerequisite for tweaking virMediatedDeviceListAdd in a separate patch,
which will take a reference for the source pointer (instead of pointer
value) and will clear it along the way.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Laine Stump <laine@laine.org>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
If we are encoding a block of data that is 16 bytes in length,
we cannot leave it as 16 bytes, we must pad it out to the next
block boundary, 32 bytes. Without this padding, the decoder will
incorrectly treat the last byte of plain text as the padding
length, as it can't distinguish padded from non-padded data.
The problem exhibited itself when using a 16 byte passphrase
for a LUKS volume
$ virsh secret-set-value 55806c7d-8e93-456f-829b-607d8c198367 \
$(echo -n 1234567812345678 | base64)
Secret value set
$ virsh start demo
error: Failed to start domain demo
error: internal error: process exited while connecting to monitor: >>>>>>>>>>Len 16
2017-05-02T10:35:40.016390Z qemu-system-x86_64: -object \
secret,id=virtio-disk1-luks-secret0,data=SEtNi5vDUeyseMKHwc1c1Q==,\
keyid=masterKey0,iv=zm7apUB1A6dPcH53VW960Q==,format=base64: \
Incorrect number of padding bytes (56) found on decrypted data
Notice how the padding '56' corresponds to the ordinal value of
the character '8'.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
