Related issue: https://gitlab.com/libvirt/libvirt/-/issues/16
Added in support for the following parameters in attach-disk:
--source-protocol
--source-host-name
--source-host-socket
--source-host-transport
Added documentation to virsh.rst specifying usage.
Signed-off-by: Ryan Gahagan <rgahagan@cs.utexas.edu>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Introduce virshAddressFormat with code from cmdAttachDiskFormatAddress
to format the address.
Note that this patch fixes some whitespace inconsistencies in the
formatted addresses.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
'virsh attach-disk' uses stat() to determine if the 'source' is a
regular file. If stat fails though it assumes that the file is block.
Since it's way more common to have regular files and the detection does
not work at all when accessing a remote host, modify the default to
assume type='file' by default.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The test uses a script and compares the output against a template file.
VIR_TEST_REGENREATE_OUTPUT can be used on test failures. This test will
be marked as expensive once the refactors it guards are done.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The ESP SCSI controllers (NCR53C90, DC390, AM53C974) have the same
requirement as the LSI Logic controller for each disk to be set via
the scsi-id=NNN property, not the lun=NNN property.
Switching the code to use an enum will force authors to pay attention
to this difference when adding future SCSI controllers.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Probing for the NCR53C90 controller is a little unusual. The
qom-list-types QMP command returns a list of all types known to
the QEMU binary. It does not distinguish devices which are user
creatable from those which are built-in.
Any QEMU target that supports PCI will have the DC390 / AM53C974
devices because they are PCI based. Due to code dependencies
in QEMU though, existence of these two devices will also pull in
the NCR53C90 device (called just 'esp' in QEMU). The NCR53C90 is
not user-creatable and can only be used when built-in to the
machine type.
This is only the case on sparc machines, and certain mips64 and
m68k machines. IOW, we don't rely on qom-list-types as a guide
for existence of NCR53C90, as it shouldn't really exist in most
QEMU binaries.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This has the added benefit of 'gotnet' only being freed after
it was possibly used in the output string.
../src/internal.h:519:27: error: ‘%s’ directive argument is null [-Werror=format-overflow=]
519 | # define fprintf(fh, ...) g_fprintf(fh, __VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
../tests/sockettest.c:194:9: note: in expansion of macro ‘fprintf’
194 | fprintf(stderr, "Expected %s, got %s\n", networkstr, gotnet);
| ^~~~~~~
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reported-by: Jaroslav Suchanek <jsuchane@redhat.com>
Fixes: ba08c5932e
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In QEMU 5.2, the guest agent learned to manipulate a user
~/.ssh/authorized_keys. Bind the JSON API to libvirt.
https://wiki.qemu.org/ChangeLog/5.2#Guest_agent
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
QEMU supports egl-headless if QEMU_CAPS_EGL_HEADLESS capability
is present. There are some additional requirements but those are
checked for in qemuValidateDomainDeviceDefGraphics() and depend
on domain configuration and thus are not representable in domain
capabilities. Let's stick with plain qemuCaps check then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Update the KVM feature tests for QEMU's kvm-poll-control performance
hint.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The aim is to eliminate virDomainCapsDeviceDefValidate(). And in
order to do so, the domain video model has to be validated in
qemuValidateDomainDeviceDefVideo().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There are two types of vhostuser ports:
dpdkvhostuser - OVS creates the socket and QEMU connects to it
dpdkvhostuserclient - QEMU creates the socket and OVS connects to it
But of course ovs-vsctl syntax for fetching ifname is different.
So far, we've implemented the former. The lack of implementation
for the latter means that we are not detecting the interface name
and thus not reporting it in domain XML, or failing to get
interface statistics.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1767013
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Add detection of mdev_types capability to channel subsystem devices.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The unsignedInt XML schema type allows for values up to 2^32 - 1, i.e.,
using 4294967296 or greater TSC frequency would fail schema validation.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function always returns zero, so it might as well be void.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The viridentitytest tests our viridentity module which is
compiled on all platforms and OSes. There is no need to have
SELinux secdriver as individual test cases are skipped if SELinux
is missing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Commit 89a3115bac was not updated after recent changes to
hash table usage and was still referencing the now removed deterministic
hash mock, which caused CI failure.
Fixes: 89a3115bac
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add a test case attempting to exercise the most of the cookie XML
parsing/formatting infra. Note that the data is not based on any real
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Migration cookie transports a lot of information but there are no tests
for it.
The test supports both xml2xml testing and also testing of the
population of the migration cookie data from a domain object, although
that option is not very useful as many things are collected from running
qemu and thus can't be tested efficiently here.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'qemu_migration_cookie' module uses these. Provide a stable override
for tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Separate the test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test is compiled only when the qemu driver is enabled so we don't
need the conditional code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's no much sense to test the remnants of the functions which just
NULL-check prior to handing off to g_hash_table* functions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Don't hide our use of GHashTable behind our typedef. This will also
promote the use of glibs hash function directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Convert all calls to virHashForEach where it's not obvious that the
callback is _not_ deleting the current element from the hash to
virHashForEachSafe which will be deemed safe to do such operation.
Now that no iterator used with virHashForEach deletes current element we
can document that virHashForEach must not touch the hash table in any
way.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Code which is sensitive to ordering now uses deterministic iterator
functions, so we can remove the mock override.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
The simplest way to write tests is to check the output against expected
output, but we must ensure that the output is stable. We can use
virHashForEachSorted as a hash iterator to ensure stable ordering.
This patch fixes 3 instances of hash iteration which is tested in
various parts, including test output changes in appropriate places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
All but one of the callers either use the list in arbitrary order or
sorted by key. Rewrite the function so that it supports sorting by key
natively and make it return the element count. This in turn allows to
rewrite the only caller to sort by value internally.
This allows to remove multiple sorting functions which were sorting by
key and the function will be also later reused for some hash operations
internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
Upcoming patch will rewrite virHashGetItems to remove the sorting
function since the prevalent mode is to order by keys.
Remove the test for it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Matt Coleman <matt@datto.com>
For seclabel remembering we need to have XATTRs and a special
namespace that is accessibly to CAP_SYS_ADMIN only (we don't want
regular users to trick us into restoring to a different label).
And what qemusecuritytest does is it checks whether we have not
left any path behind with XATTRs or not restored to original
seclabel after setAll + restoreAll round trip. But it can hardly
do so if ran on a platform where there's no XATTR namespace we
can use.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The qemusecuritytest checks for random domain XMLs from
qemuxml2argvdata/ whether set+restore seclabels leaves something
behind. It can be an XATTR that we forgot to remove or a file
that the owner was not restored on. But so far only DAC driver is
checked. Implement missing pieces and enable SELinux testing too.
This is done by mocking some libselinux APIs and following the
same logic used for DAC - everything is implemented in memory,
there is new hash table introduced that holds SELinux labels for
paths that were setfilecon_raw()-ed and in the end the hash table
is checked for entries that don't have the default SELinux label
(i.e. were not restored).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Add logic to validate and then pass through 'fmode' and 'dmode' to the
QEMU call.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose QEMU's 9pfs 'fmode' and 'dmode' options via attributes on the
'filesystem' node in the domain XML. These options control the creation
mode of files and directories, respectively, when using
accessmode=mapped.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The QEMU 9pfs 'fmode' and 'dmode' options have existed since QEMU 2.10.
Probe QEMU's command line set to check whether these options are
available, and if yes, enable this new QEMU_CAPS_FSDEV_CREATEMODE
capability on libvirt side.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Commit f00cde7f11 changed order of mount arguments in
virStorageBackendFileSystemMountGlusterArgs() and introduced per-OS
mount options and new test data. Old test data was left unmodified with
prior order of arguments. That causes a test failure on all OSes but
Linux and FreeBSD, i.e. on macOS:
15) Storage Pool XML-2-argv pool-netfs-gluster
...
In
'/Users/roolebo/dev/libvirt/tests/storagepoolxml2argvdata/pool-netfs-gluster.argv':
Offset 39
Expect [-o direct-io-mode=1 /mnt/gluster]
Actual [/mnt/gluster -o direct-io-mode=1]
Fixes: f00cde7f11 ("storage: Add default mount options for fs/netfs storage pools")
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In general, it has little sense to use Linux pci mock on macOS but
virPCIDeviceAddressGetIOMMUGroupNum() is relying on the filesystem
layout mocked by virpcimock. And all tests that rely on correct
execution of virPCIDeviceAddressGetIOMMUGroupNum() fail.
The change fixes qemuhotplugtest, qemumemlocktest and qemuxml2xmltest.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
real_close() is not inialized by the first invocation of close(). That
causes an issue when the mock is used before others and a call of
real_close() results in a jump to NULL pointer.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It is only used for debug and error purposes which can be easily
replaced by @placement.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After converting all DIR* to g_autoptr(DIR), many cleanup: labels
ended up just having "return ret", and every place that set ret would
just immediately goto cleanup. Remove the cleanup label and its
return, and just return the set value immediately, thus eliminating
the need for the return variable itself.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All of these conversions are trivial - VIR_DIR_CLOSE() (aka
virDirClose()) is called only once on the DIR*, and it happens just
before going out of scope.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This will make it easier to review upcoming patches that use g_autoptr
to auto-close all DIRs.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Now that qemu stabilized it's interface and we've switched to the new
design we can re-enable use of 'block-export-add'
This reverts commit b87cfc957f
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu decided to modify the arguments of 'block-export-add' to include an
array of bitmaps rather than a single bitmap.
Since we've added the code prior to qemu setting the interface in stone
and thus it will be changed incompatibly and we already have tests for
the new interface we need to update the code and qemu capabilities data
at the same time.
Use a array of bitmaps as the 'bitmaps' argument instead of 'bitmap' and
bump qemu capabilities for the upcoming 5.2.0 release to
v5.1.0-2827-g2c6605389c
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Simulate that the device is a cdrom when the path equals to /dev/cdrom
to provide testing for the 'host_cdrom' backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
GLibC has a really complicated way of dealing with the 'stat' function
historically, which means our mocks in turn have to look at four
different possible functions to replace, stat, stat64, __xstat,
__xstat64.
In Fedora 33 and earlier:
- libvirt.so links to __xstat64
- libc.so library exports stat, stat64, __xstat, __xstat64
- sys/stat.h header exposes stat and __xstat
In Fedora 34 rawhide:
- libvirt.so links to stat64
- libc.so library exports stat, stat64, __xstat, __xstat64
- sys/stat.h header exposes stat
Historically we only looked at the exported symbols from libc.so to
decide which to mock.
In F34 though we must not consider __xstat / __xstat64 though because
they only existance for binary compatibility. Newly built binaries
won't reference them.
Thus we must introduce a header file check into our logic for deciding
which symbol to mock. We must ignore the __xstat / __xstat64 symbols
if they don't appear in the sys/stat.h header, even if they appear
in libc.so
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We use the capability to switch to using 'block-export-add' in the
upcoming qemu release instead of the at the same time deprecated
'nbd-server-add'.
Unfortunately qemu wants to change the interface of 'block-export-add'
before the release. Since we've tried to stay up to date and added the
code before it was written in stone, we need to disable the use of the
new interface for the upcoming libvirt release so that we don't have a
version of libvirt which would not work with the upcoming qemu version.
Remove the detection of 'block-export-add' until we are more sure how
the qemu interface will look.
This patch partially reverts commit adb9f7123a
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The change re-introduces f6d6086dbf ("tests: Make references to global
symbols indirect in test drivers") that got lost during meson
conversion.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit d6b17edd51 ("tests: Lookup extended stat/lstat in mocks")
adds support for mocking of stat() and lstat() on macOS.
The change was broken because virmockstathelpers.c only follows glibc
logic and MOCK_STAT and MOCK_LSTAT are not getting defined on macOS.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There is a typo that prevents initialization of real_lstat.
Fixes: d6b17edd51 ("tests: Lookup extended stat/lstat in mocks")
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
All users of virHashTable pass strings as the name/key of the entry.
Make this an official requirement by turning the variables to 'const
char *'.
For any other case it's better to use glib's GHashTable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It doesn't make much sense to configure the bucket count in the hash
table for each case specifically. Replace all calls of virHashCreate
with virHashNew which has a pre-set size and remove virHashCreate
completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
virHashCreate will be removed in upcoming patches. This change has an
impact on ordering of the blockjob entries in one of the status XML->XML
tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Most callers pass a random number. We have virHashNew which doesn't give
the callers the option to configure the table. Since we are going to
switch to virHashNew replace it in tests and remove multiple instances
of the 'testHashGrow' case as it doesn't make sense with the new
semantics.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Export the freeing function rather than having a wrapper for the hash
creation function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
It's used only in one place in tests which isn't even automatically
evaluated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use of the -enable-fips option is being deprecated in QEMU >= 5.2.0. If
FIPS compliance is required, QEMU must be built with libcrypt which will
unconditionally enforce it.
Thus there is no need for libvirt to pass -enable-fips to modern QEMU.
Unfortunately there was never any way to probe for -enable-fips in the
first instance, it was enabled by libvirt based on version number
originally, and then later unconditionally enabled when libvirt dropped
support for older QEMU. Similarly we now use a version number check to
decide when to stop passing -enable-fips.
Note that the qemu-5.2 capabilities are currently from the pre-release
version and will be updated once qemu-5.2 is released.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Rename 'FLAG_FIPS' to 'FLAG_FIPS_HOST' to signify that we are simulating
a host supporting fips mode and use the flag to assert 'enabeFips'
argument of 'qemuProcessCreatePretendCmdBuild' rather than passing it
via QEMU_CAPS_ENABLE_FIPS.
This prepares the testsuite for testing of -enable-fips deprecation in
qemu-5.2.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
By using the new qemu monitor functions to handle passing and removing
file descriptors, we can support hotplug of vdpa devices.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Enable <interface type='vdpa'> for qemu domains. This provides basic
support and does not support hotplug or migration.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Recent versions of qemu added the -netdev vhost-vdpa device. This
capability allows libvirt to know whether this is supported.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Hostdev setup code no longer resolves hostdev name in the commandline
formatter but we mock it directly in the monitor code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
SCSI hostdev setup requires querying the host os for the actual path of
the configured hostdev. This was historically done in the command line
formatter. Our new approach is to split out this part into
'qemuProcessPrepareHost' which is designed to be skipped in tests.
Refactor the hostdev code to use this new semantics, and add appropriate
handlers filling in the data for tests and the qemuConnectDomainXMLToNative
users.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Host preparation steps which are deliberately skipped when
pretend-creating a commandline are normally executed after VM object
preparation. In the test code we are faking some of the host
preparation steps, but we were doing that prior to the call to
qemuProcessPrepareDomain embedded in qemuProcessCreatePretendCmd.
By splitting up qemuProcessCreatePretendCmd into two functions we can
ensure that the ordering of the prepare steps stays consistent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We now have a schema file for the 'cpu' elements. Use it to validate
files in 'tests/cputestdata'
Unfortunately the files in the directory are too disorganised and not
easy to split up to do something more straightforward.
The -baseline- input files are tested by the test internally and the
rest of the files are internal data feeding the tests so they don't
need validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We weren't validating certain directories containing nwfilter, network
and capability XML test files.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Validate additional XML documents we use for internal testing.
Specifically there's a lot of them belonging to the vmx and bhyve test
suite which were not validated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
<name> is mandatory for a domain XML. Add 'displayName' for all the test
cases which were missing them so that <name> is parsed correctly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
There's quite a few negative tests. In anticipation of schema testing of
the 'nwfilterxml2xmlin' directory rename all negative/non-conformant
XMLs with the -invalid suffix.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fix the 'flags' of the last rule to conform to the RNG schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The element is not needed for the test and doesn't conform to the domain
XML schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add all appropriate file from our test driver example XML directory.
Note that the two 'node.*' files are actually custom for the test driver
to load full state. We don't have a schema for them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Match the correct subsets of the files via the 'dirRegex' property.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In some cases we have directories with mixed XML files in the test
suite. Adding regex filtering will allow testing subsets of the XML
files against schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To allow greater variablitity of XML schema validation tests without
needlessly reparsing the schema we need to refactor the internals to
pass in structs rather than just paths to directory.
This allows to directly implement testing of single files and will
simplify further additions such as filtering of the list of XML files in
a directory.
The list of tested paths is directly ported for now and will be improved
in follow-up patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Switch to the new QMP command once it becomes available. Since the code
was refactored to have just one central location to do this we can
contain the ugly bits to just this one function.
Since we now use the replacement for 'nbd-server-add' mark the test case
as being OK with removal of the command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the monitor code, corresponding generator of properties for NBD and
tests validating it against the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'block-export-add' QMP command is a replacement for 'nbd-server-add'
and will allow greater flexibility. Add a capability so that we can
switch to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update to commit v5.1.0-2207-g96292515c0
Recent changes include deprecation of 'nbd-server-add' and addition of
'block-export-add'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemu is going to deprecate this command in the next release. Allow this
as later patches will implement the use of replacement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add the proper video device type when parsing bhyve's commandline into a
XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
The test case is invoked using DO_TEST_FAIL so the XML files are
actually unexpected, unused and actually don't even conform to the RNG
schema for <domain>.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
Expecting the user to specify these is cumbersome and the same XML
cannot be re-used across different revisions of SEV. Since
we have SEV platform information saved in QEMU capabilities, we can
make the attributes optional and should fill them in automatically
in the QEMU driver right before starting it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/57
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All but VIR_CPU_MODE_HOST_MODEL were moved. 'host_model' mode
has nuances that forbid the verification to be moved to parse
time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A few tweaks were made during the move:
- the error messages were changed to mention 'sata controller'
instead of 'ide controller';
- a check for address type 'drive' was added like it is done
with other bus types. The error message of qemuxml2argdata was
updated to reflect that now, instead of erroring it out from the
common code in virDomainDiskDefValidate(), we're failing earlier
with a different error message.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In fee8a61d29 a new attribute to <memballoon/> was introduced:
free-page-reporting. We don't really like hyphens in attribute
names. Use camelCase instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The output virtio-options-memballoon-freepage-reporting.xml of
xml2xmlout is the same as the input. Make it as symlink to save
space.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Always reverse-engineering VMX files, attempt to support SATA disks in
guests, and their controllers.
The esx-in-the-wild-10 test case is taken from RHBZ#1883588, while the
result of esx-in-the-wild-8 is updated with SATA disks.
Fixes (hopefully):
https://bugzilla.redhat.com/show_bug.cgi?id=1677608https://bugzilla.redhat.com/show_bug.cgi?id=1883588
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This provides basic testing for the free-page-reporting feature that is
introduced in qemu 5.1.
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch will introduce the free-page-reporting feature capabilities
that are in qemu 5.1
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, pfifo_fast queueing discipline (qdisc) is set on
newly created interfaces (including TAPs). This qdisc has three
queues and packets that want to be sent through given NIC are
placed into one of the queues based on TOS field. Queues are then
emptied based on their priority allowing interactive sessions
stay interactive whilst something else is downloading a large
file.
Obviously, this means that kernel has to be involved and some
locking has to happen (when placing packets into queues). If
virtualization is taken into account then the above algorithm
happens twice - once in the guest and the second time in the
host.
This is arguably not optimal as it burns host CPU cycles
needlessly. Guest already made it choice and sent packets in the
order it wants.
To resolve this, Linux kernel offers 'noqueue' qdisc which can be
applied on virtual interfaces and in fact for 'lo' it is by
default:
lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
Set it for other TAP devices we create for domains too. With this
change I was able to squeeze 1Mbps more from a macvtap attached
to a guest and to my 1Gbps LAN (as measured by iperf3).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For the virtio-9p bhyve command line argument, the proper order
is mount_tag=/path/to/host/dir, not the opposite.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recently virtio-9p support was added to bhyve.
On the host side it looks this way:
bhyve .... -s 25:0,virtio-9p,sharename=/path/to/shared/dir
It could also have ",ro" suffix to make share read-only.
In the Linux guest, this share is mounted with:
mount -t 9p sharename /mnt/sharename
In the guest user will see the same permissions and ownership
information for this directory as on the host. No uid/gid remapping is
supported, so those could resolve to wrong user or group names.
The same applies to the other side: chowning/chmodding in the guest will
set specified ownership and permissions on the host.
In libvirt domain XML it's modeled using the 'filesystem' element:
<filesystem type='mount'>
<source dir='/path/to/shared/dir'/>
<target dir='sharename'/>
</filesystem>
Optional 'readonly' sub-element enables read-only mode.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As preparation for g_autoptr() we need to change the function to take
only virCgroupPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
"cpu_map.xml" was moved to a directory "cpu_map" and split up into
several files.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There are no more users of VIR_ALLOC or VIR_ALLOC_N.
Delete their test cases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
commandhelper hangs indefinitely in poll() on macOS on commandtest test2
and later because POLLNVAL is returned on revents for input file
descriptor opened from /dev/null, i.e this hangs:
$ tests/commandhelper < /dev/null
BEGIN STDOUT
BEGIN STDERR
^C
But it works fine with regular stdin:
$ tests/commandhelper <<< test
BEGIN STDOUT
BEGIN STDERR
test
test
END STDOUT
END STDERR
The issue is mentioned in poll(2):
BUGS
The poll() system call currently does not support devices.
With the change all 28 cases in commandtest pass.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In 88957116c9 I've switched to -machine memory-backend=ID and
-object memory-backend-* because QEMU is obsoleting -mem-path
and -mem-prealloc. However, what I did not foresee was that using
-machine memory-backend in combination with -numa is not allowed
in QEMU. This was reported upstream and fortunately not released
yet.
The problem is that if domain has NUMA nodes then we will
generate memory-backend-* objects for NUMA nodes (because if QEMU
is new enough to expose default RAM ID it also supports -numa
memdev=) and adding non-NUMA memory backend is wrong.
Reported-by: Masayoshi Mizuma <msys.mizuma@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The feature is filtered by KVM and never automatically enabled. So even
though QEMU definition of EPYC-Rome contains this feature, the guest
won't see it. Also domain capabilities will show it as disabled for KVM
domains. Thus the feature should not really be included in our
definition of EPYC-Rome.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The CPU should be identified as EPYC-Rome, but the QEMU binary used to
gather the original test data did not support this model. Let's update
the supported models to QEMU 5.1.0.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The files contained the "-invalid" marker in their filename, marking
them as test cases that are supposed to fail in the virschematest.
Unfortunately, the "-invalid" marker does not discriminate between
different tests the files might be used in.
A later patch will introduce a new test validating the XML. This
test is not supposed to fail, as the files contain valid XML.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This adds a new value to virConnectCompareCPUFlags,
"VIR_CONNECT_CPU_VALIDATE_XML", that governs XML document validation in
virCPUDefParseXML.
In src/conf/cpu_conf.c, include configmake.h for PKGDATADIR and
virfile.h for virFileFindResource.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is present no XML test coverage for this.
Add genericxml parse + formatting coverage.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The 'checkBitmap' helper uses 'virBitmapFormat' internally and also
reports better errors. Use it instead of the open-coded checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function will also be reusable in other places of the code by making
the size check optional. For now only test12* is refactored since it
used TEST_MAP directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test validates two outputs. Don't reuse 'str' for both.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'test4' was testing three distinct operations on separate instances of a
bitmap. Split it up into 'test4a', 'test4b' and 'test4c' so that the
'bitmap' variable is not reused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'test12' was testing two distinct operations on two instances of a
bitmap. Split it up into 'test12a' and 'test12b' so that the 'bitmap'
variable is not reused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test an empty bitmap including it's extension via the self-expanding
APIs and and a "0" and "" strings when converting the string back and
forth.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move scope of variables and get rid of the 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's only one combination used so we can remove the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In our wrapper of g_dbus_connection_call_sync() in
virfirewalltest a string is duplicated and added onto a
virStringList. This leads to a memory leak because
virStringListAdd() duplicates the string itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
With us switching to glib more and more it is easy to get things
wrong (as can be seen in the previous commit). Set G_DEBUG
variable to "fatal-warnings" which causes GLib to abort the
program at the first call to g_warning() or g_critical().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
GLib implementation of g_dbus_connection_call_sync() calls
g_variant_ref_sink() on the passed @parameters to make sure they have
proper reference. If the original reference is floating the
g_dbus_connection_call_sync() consumes it, but if it's normal reference
it will just add another one.
Our mock functions were only freeing the @parameters which is incorrect
and doesn't reflect how the real implementation works.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I've found two files under qemuxml2xmloutdata/ that are the same
as in qemuxml2argvdata/. Replace them with symlinks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
So far, Libvirt configures memory-backend-* for memory hotplug,
possibly NUMA nodes and in a few other cases. This patch
switches to constructing the memory-backend-* command line for
all cases. To keep ability to migrate guests a little hack is
used: the ID of the object is set to the one that QEMU uses
internally anyways. These IDs are stable (first started to appear
somewhere around v0.13.0-rc0~96) and can't change.
In fact, this patch does exactly what QEMU does internally. The
reason for moving the logic into Libvirt is that QEMU wants to
deprecate the old style of specifying memory.
So far, only x84_64 test cases are changed, because tests for
other architectures use older capabilities, which still lack the
QEMU_CAPS_MACHINE_MEMORY_BACKEND capability and they don't report
the RAM ID.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1836043
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The machine structure has another (optional) attribute:
default-ram-id, which specifies the alias of the default RAM
object. While the alias is private, it can never change in order
to not break migration. QEMU uses the alias when allocating
regular, not NUMA memory. In order to switch to new command line
and maintain migration, save this ID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All three memory backends (-file, -ram and -memfd) have .prealloc
attribute. Since we are setting it only for -file, the
corresponding code lives only under if() that handles that
specific backend. But in near future we will want to set the
attribute for other backends too. Therefore, move the
corresponding code outside of the if().
This causes some .argv files to be changed, but the only change
happening there is move of the attribute (best viewed with:
'git show --color-words=.').
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This capability tracks whether "usb-host" device has "hostdevice"
attribute. This attribute allows us to specify full path to the
USB device ("/dev/bus/usb/$bus/$dev") but more importantly, since
QEMU uses qemu_open() for this attribute it allows us to pass
pre-opened FD and have QEMU not bother with opening the file at
all.
The attribute was added in v5.1.0-rc0~71^2~1 QEMU commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Mid-cycle caps resync. Notable change is that virtio-blk enables
multiqueue by default and the addition of
'calc-dirty-rate'/'query-dirty-rate' QMP commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We didn't actually use this file. Change the disk type to 'file' so that
it works in qemu and add pre and post-blockdev invocations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
'virTestCompareToFile' automatically fixes newline if it is not present
in the input string but is present in the file. In this case we need to
append the erorr messages with a newline so that
VIR_TEST_REGENERATE_OUTPUT produces files which will pass syntax-check.
Fixes: 9ec77eef2d
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit f253dc90f5 introduced a test regression in environments with
Xen < 4.10. The logic in libxl_conf.c correctly maps ACPI and APIC
from virDomainObj to libxl_domain_conf based on
LIBXL_HAVE_BUILDINFO_APIC, but the tests did not account for the
different libxl_domain_conf JSON representations.
One approach to fixing the test regression is to duplicate JSON test
data files, having one set for Xen <= 4.9 and another for Xen 4.10
and greater. To avoid duplicate data files, this patch takes the
approach of modifying the libxl_domain_conf object based on
LIBXL_HAVE_BUILDINFO_APIC, before retrieving the JSON representation.
It allows using the same test data files for all supported versions
of Xen by adjusting the intermediate form of libxl_domain_conf object
as needed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add minimal coverage for non-x86_64 timer validation
from commit 2f5d8ffebe
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When an error is expected, the error message will be checked.
This is expressed by creating an additional ".err" file containing
the expected error message.
It is added in order to make sure the expected errors
are not masked by other errors during test execution while
leveraging the existing framework.
In order to keep it simple, an input file cannot be reused
anymore to cover several expected error cases configured
in the test code. An input file can still be reused by creating
a test case specific symlink.
For consistency, the mock needs to report an error now, too,
as every failure must have an error; otherwise a test case will
fail.
Require LC_ALL=C explicitly to make sure error messages are not
localized for testing.
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The code path is invoked by one of the test cases. Upcoming testing of
error messages would fail.
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add an abort() on the class/object allocation failures so that
virStorageSourceNew() always returns a virStorageSource and remove
checks from all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The alignment for the pSeries NVDIMM does not depend on runtime
constraints. This means that it can be done in device parse
time, instead of runtime, allowing the domain XML to reflect
what the auto-alignment would do when the domain starts.
This brings consistency between the NVDIMM size reported by the
domain XML and what the guest sees, without impacting existing
guests that are using an unaligned size - they'll work as usual,
but the domain XML will be updated with the actual size of the
NVDIMM.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We set WITH_LIBATTR in meson.build, not WITH_ATTR.
Also link securityselinuxlabeltest with test_qemu_driver_lib.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 3ace72965c
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Various places reported by cppcheck's invalidPrintfArgType_sint
and invalidPrintfArgType_uint.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Sometimes parallel compilation randomly fails on platforms
that do not have many drivers enabled, like macOS:
In file included from ../tests/esxutilstest.c:13:
../src/esx/esx_vi_types.h:62:10: fatal error: 'esx_vi_types.generated.typedef' file not found
#include "esx_vi_types.generated.typedef"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
List esx_gen_headers as a source to stop meson from building
it before the headers are generated.
https://gitlab.com/libvirt/libvirt/-/jobs/726039284
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Right now, the logic that takes care of deciding whether expensive
tests should be run or not is not working correctly: more
specifically, it's not possible to use something like
$ VIR_TEST_EXPENSIVE=1 ninja test
to override the default choice, because in meson.build we always
pass an explicit value that overrides whatever is present in the
environment.
We could implement logic to make this work properly, but that
would require some refactoring of our test infrastructure and is
arguably of little value given that running
$ meson build -Dexpensive_tests=enabled
is very fast, so let's just stop telling users about the variable
instead and call it a day.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Support setting a password for the VNC framebuffer using the passwd
attribute on the <graphics/> element, if the driver has the
BHYVE_CAP_VNC_PASSWORD capability.
Note that virsh domxml-from-native does not output the password in the
generated XML, as VIR_DOMAIN_DEF_FORMAT_SECURE is not set when
formatting the domain definition.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The resolution of the VNC framebuffer can now be set via the resolution
definition introduced in 5.9.0.
Also, add "gop" to the list of model types the <resolution/>
sub-element is valid for.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a new helper function, bhyveParsePCIFbuf, to parse the bhyve-argv
parameters for a frame-buffer device to <graphics/> and <video/>
definitions.
For now, only the listen address, port, and vga mode are detected.
Unsupported parameters are silently skipped.
This involves upgrading the private API to expose the
virDomainGraphicsDefNew helper function, which is used by
bhyveParsePCIFbuf.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In [1], changes were made to remove the existing auto-alignment
for pSeries NVDIMM devices. That design promotes strange situations
where the NVDIMM size reported in the domain XML is different
from what QEMU is actually using. We removed the auto-alignment
and relied on standard size validation.
However, this goes against Libvirt design philosophy of not
tampering with existing guest behavior, as pointed out by Daniel
in [2]. Since we can't know for sure whether there are guests that
are relying on the auto-alignment feature to work, the changes
made in [1] are a direct violation of this rule.
This patch reverts [1] entirely, re-enabling auto-alignment for
pSeries NVDIMM as it was before. Changes will be made to ease
the limitations of this design without hurting existing
guests.
This reverts the following commits:
- commit 2d93cbdea9
Revert "formatdomain.html.in: mention pSeries NVDIMM 'align down' mechanic"
- commit 0ee56369c8
qemu_domain.c: change qemuDomainMemoryDeviceAlignSize() return type
- commit 07de813924
qemu_domain.c: do not auto-align ppc64 NVDIMMs
- commit 0ccceaa57c
qemu_validate.c: add pSeries NVDIMM size alignment validation
- commit 4fa2202d88
qemu_domain.c: make qemuDomainGetMemorySizeAlignment() public
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg02010.html
[2] https://www.redhat.com/archives/libvir-list/2020-September/msg00572.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Closed file handles need to be initialized to -1, not 0. This caused a
inappropriate double close of stdin, which is not desirable, although
it had no ill effects.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is currently a hang in test27 that exhibits itself on FreeBSD 11.4
only. The behaviour is that virCommandProcessIO gets POLLIN on the
FD for stdout, but read() blocks. Meanwhile commandtest also blocks
in write for stderr because the pipe buffers are full.
This fix in commandhelper likely does not really address the root cause
just hides it due to the buffering done by FILE *. Mixing UNIX FD I/O
and FILE * I/O is bad practice regardless.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, slot 1 is only allowed to be used by the LPC device.
Relax this requirement and allow to use slot 1 if it was explicitly
specified by the user for any other device type. In this case the LPC
device will have the next available address.
If slot 1 was not used by the user, it'll be reserved for the LPC
device, even if it is not configured to make address assignment
consistent in case the LPC device becomes necessary (e.g. the user
adds a console or a video device which require LPC).
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Support modeling of the 'isa' controller for bhyve. User can manually
define any PCI slot for the 'isa' controller, including PCI slot 1,
but other devices are not allowed to use this address.
When domain configuration requires the 'isa' controller to be present,
automatically add it on domain post-parse stage.
Now, as this controller is always available when needed, it's not
necessary to implicitly add it to the bhyve command line, so remove
bhyveBuildLPCArgStr().
Also, make bhyveDomainDefNeedsISAController() static as it's no longer
used outside of bhyve_domain.c.
As more than one ISA controller is not supported by bhyve,
and multiple controllers with the same index are forbidden,
so forbid ISA controllers with non-zero index for bhyve.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The storage driver was wired up to support creating raw volumes in LUKS
format, but was never adapted to support LUKS-in-qcow2. This is trivial
as it merely requires the encryption properties to be prefixed with
the "encrypt." prefix, and "encrypt.format=luks" when creating the
volume.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The two removed files have exactly the same config as other LUKS volume
data files, simply with different file names. Consolidate down to just
two LUKS volume data files as that's all that we need for the test
coverage.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
b_info->u.hvm.{acpi,apic} are deprecated. But also, on recent libxl
version (4.14) the old one seems to be broken. While libxl part should
be fixed too, update the usage here and at some point drop support for
the old version.
b_info->acpi was added in Xen 4.8
b_info->apic was added in Xen 4.10
Xen 4.10 is the oldest version that still has security support (until
December 2020).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Rewrite to use GLib DBus instead of libdbus will introduce function with
large number of arguments that we will have to mock for our tests so we
need to extend the number of arguments for our macros.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This test calls into src/util/virfirewalld.c where it uses DBus to
figure out if firewalld is registered. Without the mock it luckily
fails and the test works correctly.
To isolate the tests from host environment we should mock the DBus
calls.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'readonly' hostdev property is stored separately from the
virStorageSource as some hostdevs are not described by a virStorage
source. We need to propagate the flag to the virStorage source also for
iSCSI backends as it's used to generate the backend properties.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1868856
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modify the test case to enable TLS and add private data containing
aliases of objects corresponding to a TLS setup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test that we can cope with a long useralias when generating SCSI hostdev
commandline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU's blockdev nodenames which are used to back SCSI/iSCSI hostdevs are
limited to 32 characters. If a user passes a very long user alias as
name of the host device it's easy to end up with a too-long nodename.
To prevent this from happening don't base the nodename on the possibly
user-specified alias but on the normal sequential node name generator.
We then store the name in the status XML for further use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The secret object is used to pass data to the backend so it's better
fitting to base the secret object name on the SCSI host device backend
name.
Since we store the object alias in the status XML this modification is
safe in regards to existing guests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For upgrade reasons so that we can modify the used nodename we must
generate the old version for all status XMLs which don't have it stored
explicitly.
The change will be required as using the user-provided alias may result
in too-long nodenames which will be rejected by qemu.
Add code which fills in the appropriate old value and add test cases to
validate that it's added and also that existing nodenames are not
overwritten.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a local SCSI host device to validate upcoming generated data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test case tests other things besides disk secinfos, so we can make
it more universal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a SCSI host device with a user-specified alias to illustrate the
upcoming changes.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make channel subsystem (CSS) devices available in the node_device driver.
The CCS devices reside in the computer system and provide CCW devices, e.g.:
+- css_0_0_003a
|
+- ccw_0_0_1a2b
|
+- scsi_host0
|
+- scsi_target0_0_0
|
+- scsi_0_0_0_0
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
testConfRoundTrip would return 0 (success) if virConfWriteMem succeeded
and virTestCompareToFile failed.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This wires up support for using the new virt-ssh-helper binary with the ssh,
libssh and libssh2 protocols.
The new binary will be used preferentially if it is available in $PATH,
otherwise we fall back to traditional netcat.
The "proxy" URI parameter can be used to force use of netcat e.g.
qemu+ssh://host/system?proxy=netcat
or the disable fallback e.g.
qemu+ssh://host/system?proxy=native
With use of virt-ssh-helper, we can now support remote session URIs
qemu+ssh://host/session
and this will only use virt-ssh-helper, with no fallback. This also lets
the libvirtd process be auto-started, and connect directly to the
modular daemons, avoiding use of virtproxyd back-compat tunnelling.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Three parts of the code all build up the same SSH shell script
snippet for remote tunneling the RPC protocol, but in slightly
different ways. Combine them all into one helper method in the
virNetClient code, since this logic doesn't really belong in
the virNetSocket code.
Note that the this change means the shell snippet is passed to
the SSH binary as a single arg, instead of three separate args,
but this is functionally identical, as the three separate args
were combined into one already when passed to the remote system.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
g_regex_unref reports an error if called with a NULL argument.
We have two cases in the code where we (possibly) call it on a NULL
argument. The interesting one is in virDomainQemuMonitorEventCleanup.
Based on VIR_CONNECT_DOMAIN_QEMU_MONITOR_EVENT_REGISTER_REGEX, we unref
data->regex, which has two problems:
* On the client side, flags is -1 so the comparison is true even if no
regex was used, reproducible by:
$ virsh qemu-monitor-event --timeout 1
which results in an ugly error:
(process:1289846): GLib-CRITICAL **: 14:58:42.631: g_regex_unref: assertion 'regex != NULL' failed
* On the server side, we only create the regex if both the flag and the
string are present, so it's possible to trigger this message by:
$ virsh qemu-monitor-event --regex --timeout 1
Use a non-NULL comparison instead of the flag to decide whether we need
to unref the regex. And add a non-NULL check to the unref in the
VirtualBox test too.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 71efb59a4dhttps://bugzilla.redhat.com/show_bug.cgi?id=1876907
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In the past we had to declare @cfg and then explicitly unref it.
But now, with glib we can use g_autoptr() which will do the unref
automatically and thus is more bulletproof.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Local socket connections were outright disabled because there was no "server"
part in the URI. However, given how requirements and usage scenarios are
evolving, some management apps might need the source libvirt daemon to connect
to the destination daemon over a UNIX socket for peer2peer migration. Since we
cannot know where the socket leads (whether the same daemon or not) let's decide
that based on whether the socket path is non-standard, or rather explicitly
specified in the URI. Checking non-standard path would require to ask the
daemon for configuration and the only misuse that it would prevent would be a
pretty weird one. And that's not worth it. The assumption is that whenever
someone uses explicit UNIX socket paths in the URI for migration they better
know what they are doing.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
For this we need to make the function accessible (at least privately). The
behaviour will change in following patches and the test helps explaining the
change.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Rather than use the names "fial" and "kep", use "fail" and "keep". In
the DO_TEST() macro, to prevent the preprocessor replacing the struct
member names during assignment, use the names "fail_" and "keep_"
instead.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Currently, we are mixing: #if HAVE_BLAH with #if WITH_BLAH.
Things got way better with Pavel's work on meson, but apparently,
mixing these two lead to confusing and easy to miss bugs (see
31fb929eca for instance). While we were forced to use HAVE_
prefix with autotools, we are free to chose our own prefix with
meson and since WITH_ prefix appears to be more popular let's use
it everywhere.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
MacOS can not pre-load modules, so mock libraries must be built
as shared libraries (without asneeded striping, and undefined
symbols allowed).
Signed-off-by: Scott Shambarger <scott-libvirt@shambarger.net>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Assume commit 0466ff28f2 used case-insensitive replace s/OUT/EXP/
by mistake and this file is still licensed under GPLv2.0+
Undo the change.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
FIxes: 0466ff28f2
Cc: Cole Robinson <crobinso@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
Add support for the writeFiltering attribute in the domXML to native
config converter. Also include a test.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
By default Xen only allows guests to write "known safe" values into PCI
configuration space, yet many devices require writes to other areas of
the configuration space in order to operate properly. To allow writing
any values Xen supports the 'permissive' setting, see xl.cfg(5) man page.
This change models Xen's permissive setting by adding a writeFiltering
attribute on the <source> element of a PCI hostdev. When writeFiltering
is set to 'no', the Xen permissive setting will be enabled and guests
will be able to write any values into the device's configuration space.
The permissive setting remains disabled in the absense of the
writeFiltering attribute, of if it is explicitly set to 'yes'.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Use https: links for websites that support them.
The URIs which are used as namespace identifiers
are left alone.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
When editing a domain with hotplug enabled, I removed the only
NUMA node it had and got no error. I got the error later though,
when starting the domain. This is not as user friendly as it can
be. Move the validation call out from command line generator and
into domain validator (which is called prior to starting cmd line
generation anyway).
When doing this, I had to remove memory-hotplug-nonuma xml2xml
test case because there is no way the test case can succeed,
obviously.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Previous patch handled the runtime case where a non-x86 host is
fetching /proc/cpuinfo data for a microcode info that we know
it doesn't exist. This change alone speeded everything by a
bit for non-x86, but there is at least one major culprit left.
qemuxml2argvtest does several arch-specific tests, and a good
chunk of them are x86 exclusive. This means that 'hostArch'
will be seen as x86 for these tests, even when running in
non-x86 hosts. In a Power 9 server with 128 CPUs, qemuxml2argvtest
takes 298 seconds to complete in average, and 'perf record'
indicates that 95% of the time is spent in
virHostCPUGetMicrocodeVersion().
This patch mocks virHostCPUGetMicrocodeVersion() to always return
0 in the tests, avoiding /proc/cpuinfo reads. This will make all
tests behave arch-agnostic, and the microcode value being 0 has no
impact on any existing test.
This is a CI speed across the board for all archs, including x86,
given that we're not reading /proc/cpuinfo in the tests. For
a Thinkpad T480 laptop with 8 Intel i7 CPUs, qemuxml2argvtest
went from 15.50 sec to 12.50 seconds. The performance gain is even
more noticeable for huge servers with lots of CPUs. For the
Power 9 server mentioned above, this patch speeds qemuxml2argvtest
to 9 seconds, down from 298 sec.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Some test rely too much on declaring variables in the middle
of the function. Use the macro to locally suppress the warning
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The ScanTargets testing code declares some variables
in the middle of main.
Split it out into a separate function.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Split those initializations that depend on a statement
above them.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Support qemu commandline passthrough in the domXML to native config
converter. Add tests to check the conversion.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Allow to map sound playback and recording devices to host devices
using "<audio type='oss'/>" OSS audio backend.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
bhyve supports intel hda sound devices that could be specified
on the command like using "-1:0,hda,play=$play_dev,rec=$rec_dev",
where "1:0" is a PCI address, and "$play_dev" and "$rec_dev"
point to the playback and recording device on the host respectively.
Currently, schema of the 'sound' element doesn't allow specifying
neither playback nor recording devices, so for now hardcode
/dev/dsp0, which is the first audio device on the host.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The existing auto-align behavior for pSeries has the idea to
alleviate user configuration of the NVDIMM size, given that the
alignment calculation is not trivial to do (256MiB alignment
of mem->size - mem->label_size value, a.k.a guest area). We
align mem->size down to avoid end of file problems.
The end result is not ideal though. We do not touch the domain
XML, meaning that the XML can report a NVDIMM size 255MiB smaller
than the actual size the guest is seeing. It also adds one more
thing to consider in case the guest is reporting less memory
than declared, since the auto-align is transparent to the
user.
Following Andrea's suggestion in [1], let's instead do an
size alignment validation. If the NVDIMM is unaligned, error out
and suggest a rounded up value. This can be bothersome to users,
but will bring consistency of NVDIMM size between the domain XML
and the guest.
This approach will force existing non-running pSeries guests to
readjust the NVDIMM value in their XMLs, if necessary. No changes
were made for x86 NVDIMM support.
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg01471.html
Suggested-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The machine types for this cycle were already added and qemu also added
a property for the machine type object called "default-ram-id".
Also "block-bitmap-mapping" is supported as a migration parameter.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu-v5.1.0 is released now. There weren't any noticable changes since
our last update to 'rc2'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Ensure that the migration parameters are formatted properly according to
the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When netdev-add was qapified it took us by surprise and we had to
scramble to fix the internals to format conformant monitor arguments.
Add a last-resort early warning system if this happens to object-add or
device_add. Hopefully qemu developers notify us sooner than this.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We'll need to match that a certain part of the qemu schema hasn't grown
new properties unexpectedly. Add a helper which matches an 'object' QMP
schema entry against a template and reports errors if expected types
don't match or new entries are added.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There was a report on libvirt-users [1] about the domxml to/from
native converter in the Xen driver not handling PCI addresses
without a domain specification. This patch improves parsing of PCI
addresses in the converter and allows PCI addresses with only
bb:ss.f. xl.cfg(5) also allows either the dddd:bb:ss.f or bb:ss.f
format. A test has been added to check the conversion from xl.cfg
to domXML.
[1] https://www.redhat.com/archives/libvirt-users/2020-August/msg00040.html
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Update the remaining 'make check' references after the
switch to meson/ninja.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Commit bcbb026993 converted qemublocktest to use
g_autoptr for virQEMUCaps. To prevent it from crashing,
don't explicitly call virObjectUnref() on this object.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We already allow controlling the initiator IQN for iSCSI based disks.
Add the same for host devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both accept a NULL value gracefully and virStringFreeList
does not zero the pointer afterwards, so a straight replace
is safe.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Role(master or peer) controls how the domain behaves on migration.
For more details about migration with ivshmem, see
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/system/ivshmem.rst;hb=HEAD
It's a optional attribute in libvirt, and qemu will choose default
role for ivshmem device if the user is not specified.
With device property 'role', the value can be 'master' or 'peer'.
- 'master' (means 'master=on' in qemu), the guest will copy
the shared memory on migration to the destination host.
- 'peer' (means 'master=off' in qemu), the migration is disabled.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Yang Hang <yanghang44@huawei.com>
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We need to modify check-file-access.py to be usable as wrapper for
libvirt tests. This way we can run the tests using this command:
meson test --setup access
which will run all tests using check-file-access.py as a wrapper.
With autotools all file access are written into single file for all
tests and compared once the whole test suite is done.
With Meson we will compare the file access after every single test
because it is used as wrapper now. That requires writing the file
access into separate files for every single test as they are executed
in parallel.
Since the wrapper is used for all tests in Meson including tests outside
of tests directory we have to check for presence of the output file.
We should also cleanup after ourselves.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
