Add reference counting on the virDomainObjPtr objects. With the
forthcoming asynchronous QEMU monitor, it will be neccessary to
release the lock on virDomainObjPtr while waiting for a monitor
command response. It is neccessary to ensure one thread can't
delete a virDomainObjPtr while another is waiting. By introducing
reference counting threads can make sure objects they are using
are not accidentally deleted while unlocked.
* src/conf/domain_conf.h, src/conf/domain_conf.c: Add
virDomainObjRef/Unref APIs, remove virDomainObjFree
* src/openvz/openvz_conf.c: replace call to virDomainObjFree
with virDomainObjUnref
In preparation of the monitor I/O process becoming fully asynchronous,
it is neccessary to ensure all access to internals of the qemuMonitorPtr
object is protected by a mutex lock.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add mutex for locking
monitor.
* src/qemu/qemu_driver.c: Add locking around all monitor commands
Change the QEMU driver to not directly invoke the text mode monitor
APIs. Instead add a generic wrapper layer, which will eventually
invoke either the text or JSON protocol code as needed. Pass an
qemuMonitorPtr object into the monitor APIs instead of virDomainObjPtr
to complete the de-coupling of the monitor impl from virDomainObj
data structures
* src/qemu/qemu_conf.h: Remove qemuDomainObjPrivate definition
* src/qemu/qemu_driver.c: Add qemuDomainObjPrivate definition.
Pass qemuMonitorPtr into all monitor APIs instead of the
virDomainObjPtr instance.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add thin
wrappers for all qemuMonitorXXX command APIs, calling into
qemu_monitor_text.c/h
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
Rename qemuMonitor -> qemuMonitorText & update to accept
qemuMonitorPtr instead of virDomainObjPtr
Decouple the monitor code from the virDomainDefPtr structure
by moving the disk encryption lookup code back into the
qemu_driver.c file. Instead provide a function callback to
the monitor code which can be invoked to retrieve encryption
data as required.
* src/qemu/qemu_driver.c: Add findDomainDiskEncryption,
and findVolumeQcowPassphrase. Pass address of the method
findVolumeQcowPassphrase into qemuMonitorOpen()
* src/qemu/qemu_monitor.c: Associate a disk
encryption function callback with the qemuMonitorPtr
object.
* src/qemu/qemu_monitor_text.c: Remove findDomainDiskEncryption
and findVolumeQcowPassphrase.
Introduce a new qemuDomainObjPrivate object which is used to store
the private QEMU specific data associated with each virDomainObjPtr
instance. This contains a single member, an instance of the new
qemuMonitorPtr object which encapsulates the QEMU monitor state.
The internals of the latter are private to the qemu_monitor* files,
not to be shown to qemu_driver.c
* src/qemu/qemu_conf.h: Definition of qemuDomainObjPrivate.
* src/qemu/qemu_driver.c: Register a functions for creating
and freeing qemuDomainObjPrivate instances with the domain
capabilities. Remove the qemudDispatchVMEvent() watch since
I/O watches are now handled by the monitor code itself. Pass
a new qemuHandleMonitorEOF() callback into qemuMonitorOpen
to allow notification when the monitor quits.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Introduce
the 'qemuMonitor' object. Temporarily add new APIs
qemuMonitorWrite, qemuMonitorRead, qemuMonitorWaitForInput
to allow text based monitor impl to perform I/O.
* src/qemu/qemu_monitor_text.c: Call APIs for reading/writing
to monitor instead of accessing the file handle directly.
The qemu_driver.c code should not contain any code that interacts
with the QEMU monitor at a low level. A previous commit moved all
the command invocations out. This change moves out the code which
actually opens the monitor device.
* src/qemu/qemu_driver.c: Remove qemudOpenMonitor & methods called
from it.
* src/Makefile.am: Add qemu_monitor.{c,h}
* src/qemu/qemu_monitor.h: Add qemuMonitorOpen()
* src/qemu/qemu_monitor.c: All code for opening the monitor
* src/util/threads-pthread.c: pthreads APIs do not set errno, instead
the return value is the positive errno. Set errno based on the return
value in the wrappers
* src/util/pci.c, src/util/pci.h: Make the pciDeviceList struct
opaque to callers of the API. Add accessor methods for managing
devices in the list
* src/qemu/qemu_driver.c: Update to use APIs instead of directly
accessing pciDeviceList fields
As it was basically unimplemented and more confusing than useful
at the moment.
* src/libvirt_private.syms: remove from internal symbols list
* src/qemu/qemu_bridge_filter.c src/util/ebtables.c: remove code and
one use of the unimplemented function
In case of an error the domains hash and the driver mutex may leak.
* src/opennebula/one_driver.c: free/destroy domains hash and driver
mutex in error cases
- Make reading ID from file working for IDs > 127
- Fix inverse error check for writing ID to file
- Use feof() to distinguish EOF from real error of fread()
- Don't interpret libssh2 error codes as number of bytes
phypNumDomainsGeneric() and phypListDomainsGeneric() return 0 in case
of an error. This makes it impossible to distinguish between an actual
error and no domains being defined on the hypervisor. It also turn the
no domains situation into an error. Return -1 in case of an error to
fix this problem.
* src/network/bridge_driver.c: when exec'ing dnsmaq, if there are
DHCP ranges defined, then compute and pass the --dhcp-lease-max
deriving the maximum number of leases
* src/conf/network_conf.h: extend the structure to store the range
* src/conf/network_conf.c: before adding a range parse the IP addresses
do some checking and keep the size
* src/internal.h (ATTRIBUTE_SENTINEL): New, it's a ggc feature and
protected as such
* src/util/buf.c (virBufferStrcat): Use it.
* src/util/ebtables.c (ebtablesAddRemoveRule): Use it.
* src/util/iptables.c (iptableAddRemoveRule: Use it.
* src/util/qparams.h (new_qparam_set, append_qparams): Use it.
* docs/apibuild.py: avoid breaking the API generator with that new
internal keyword macro
* include/libvirt/virterror.h src/util/virterror.c: add a new error
VIR_ERR_CONFIG_UNSUPPORTED for valid but unsupported configuration options
* src/conf/domain_conf.c: Throw an error if guestfwd address isn't IPv4
and cleanup a number of parsing return error values.
allows the following to be specified in a domain:
<channel type='pipe'>
<source path='/tmp/guestfwd'/>
<target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>
* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
schemas and the parsing/serialization side for the new construct
QEmu support will add the following on the qemu command line:
-chardev pipe,id=channel0,path=/tmp/guestfwd
-net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0
* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
A character device's target (it's interface in the guest) had only a
single property: port. This patch is in preparation for adding targets
which require other properties.
Since this changes the conf type for character devices this affects
a number of drivers:
* src/conf/domain_conf.[ch] src/esx/esx_vmx.c src/qemu/qemu_conf.c
src/qemu/qemu_driver.c src/uml/uml_conf.c src/uml/uml_driver.c
src/vbox/vbox_tmpl.c src/xen/xend_internal.c src/xen/xm_internal.c:
target properties are moved into a union in virDomainChrDef, and a
targetType field is added to identify which union member should be
used. All current code which touches a virDomainChrDef is updated both
to use the new union field, and to populate targetType if necessary.
Current implementation of lxc driver creates vethN named
interface(s) in the host and passes as it is to a container.
The reason why it doesn't use ethN is due to the limitation
that one namespace cannot have multiple iterfaces that have
an identical name so that we give up creating ethN named
interface in the host for the container.
However, we should be able to allow the container to have
ethN by changing the name after clone(CLONE_NEWNET).
* src/lxc/lxc_container.c src/lxc/veth.c src/lxc/veth.h: do the clone
and then renames interfaces eth0 ... ethN to keep the interface names
familiar in the domain
* src/lxc/lxc_container.c src/lxc/lxc_controller.c src/lxc/lxc_driver.c
src/lxc/veth.c: most of cleanups are just capitalizing their messages
though, some fixes wrong error messages and awkward indentations, and
improves error messages.
* src/qemu/qemu.conf src/qemu/qemu_conf.c src/qemu/qemu_conf.h: there is
a new config type option for mac filtering
* src/qemu/qemu_bridge_filter.[ch]: new module for the ebtable entry points
* src/qemu/qemu_driver.c: plug the MAC filtering at the right places
in the domain life cycle
* src/Makefile.am po/POTFILES.in: add the new module
* configure.in: look for ebtables binary location if present
* src/Makefile.am: add the new module
* src/util/ebtables.[ch]: new module and internal APIs around
the ebtables binary
* src/libvirt_private.syms: export the symbols only internally
- Don't duplicate SystemError
- Use proper error code in domain_conf
- Fix a broken error call in qemu_conf
- Don't use VIR_ERR_ERROR in security driver (isn't a valid code in this case)
All drivers have copy + pasted inadequate error reporting which wraps
util.c:virGetHostname. Move all error reporting to this function, and improve
what we report.
Changes from v1:
Drop the driver wrappers around virGetHostname. This means we still need
to keep the new conn argument to virGetHostname, but I think it's worth
it.
This patch updates the xml parsing and formatting, and the associated
virInterfaceDef data structure to support IPv6, along the way adding
support for multiple protocols per interface, and multiple IP
addresses per protocol.
* src/conf/interface_conf.[ch]: update the structures, code for parsing
and serialization
This patch adds the flag VIR_INTERFACE_XML_INACTIVE to
virInterfaceGetXMLDesc's flags. When it is*not* set (the default), the
live interface info will be returned in the XML (in particular, the IP
address(es) and netmask(s) will be retrieved by querying the interface
directly, rather than reporting what's in the config file). The
backend of this is in netcf's ncf_if_xml_state() function.
* configure.in libvirt.spec.in: requires netcf >= 0.1.3
* include/libvirt/libvirt.h.in: adds flag VIR_INTERFACE_XML_INACTIVE
* src/conf/interface_conf.c src/interface/netcf_driver.c src/libvirt.c:
update the parsing and backend routines accordingly
* tools/virsh.c: change interface edit to inactive definition and
adds the inactive flag for interface dump
The minimal XML returned from ncf_if_xml_state() doesn't contain this
attribute (which makes no sense in the case of reporting current
status of the interface), and it was preventing it from passing
through the parse/format step.
* src/conf/interface_conf.[ch]: add a new virInterfaceStartMode value
and modify loading/saving accordingly
There are places where an interface will not have a mac address, and netcf
returns this as a NULL pointer rather than a pointer to an empty string.
Rather than checking for this all over the place in libvirt, just save it
in the virInterface object as an empty string.
* src/datatypes.c: allow NULL mac in virGetInterface()
introduced on commit 9231aa7d95
* src/qemu/qemu_driver.c: in qemudRemoveDomainStatus fix a reference
to an undefined variable buf and free up an allocated string
When building with --disable-nls, I got a few messages like this:
storage/storage_backend.c: In function 'virStorageBackendCreateQemuImg':
storage/storage_backend.c:571: warning: format not a string literal and no format arguments
Fix these up.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
qemudShutdownVMDaemon() calls qemudRemoveDomainStatus(), which
then calls virFileDeletePID(). qemudShutdownVMDaemon() then
unnecessarily calls virFileDeletePID() again. Remove this second
usage of it, and also slightly refactor qemudRemoveDomainStatus()
to VIR_WARN appropriate error messages.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The LXC driver was mistakenly returning -1 for lxcStartup()
in scenarios that are not an error. This caused the libvirtd
to quit for unprivileged users. This fixes the return code
of LXC driver, and also adds a "name" field to the virStateDriver
struct and logging to make it easier to find these problems
in the future
* src/driver.h: Add a 'name' field to state driver to allow
easy identification during failures
* src/libvirt.c: Log name of failed driver for virStateInit
failures
* src/lxc/lxc_driver.c: Don't return a failure code for
lxcStartup() if LXC is not available on this host, simply
disable the driver.
* src/network/bridge_driver.c, src/node_device/node_device_devkit.c,
src/node_device/node_device_hal.c, src/opennebula/one_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/secret/secret_driver.c, src/storage/storage_driver.c,
src/uml/uml_driver.c, src/xen/xen_driver.c: Fill in name
field in virStateDriver struct
If an error occurs between the allocation of an item and appending it
to the list, the item leaks. Free such orphaned items in error cases.
* src/esx/esx_vi.c: free orphaned items in error cases
The default transport for the VI API is HTTPS. If the server redirects
from HTTPS to HTTP the driver would silently follow that redirection.
The user assumes to communicate with the server over a secure transport
but isn't.
This patch disables automatical redirection following. The driver reports
an error if the server tries to redirect.
* src/esx/esx_vi.c: refactor the call to curl_easy_perform() into a
function and do error handling there, disable automatical redirection
following for curl
* src/esx/esx_vi.h: change the type of responseCode to int
Unified function naming scheme:
- 'lookup' functions query the ESX or vCenter for information
- 'get' functions return information from a local object
* src/esx/esx_driver.c, src/esx/esx_vi.[ch]: unify function naming
In order to register a new virtual machine the ESX driver needs to upload
a VMX file to a datastore. Try to put this file beside the main VMDK file
of the virtual machine. Change the disk selection for datastore detection
to choose the first file-based harddisk instead of just the first disk.
The first disk may be a CDROM disk and ISO images are normaly not located
in the virtual machine's directory.
* src/esx/esx_driver.c: change disk selection for datastore detection
This allows to use domain-xml-from-native with VMX files that reference
unavailable datastores.
* src/esx/esx_vmx.c: fallback to the preliminary name if the datastore
cannot be found
Rename virDomainIsActive to virDomainObjIsActive, and
virInterfaceIsActive to virInterfaceObjIsActive and finally
virNetworkIsActive to virNetworkObjIsActive.
* src/conf/domain_conf.c, src/conf/domain_conf.h,
src/conf/interface_conf.h, src/conf/network_conf.c,
src/conf/network_conf.h, src/lxc/lxc_driver.c,
src/network/bridge_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c: Update for
renamed APIs.
Nearly all of the methods in src/util/util.h have error codes that
must be checked by the caller to correct detect & report failure.
Add ATTRIBUTE_RETURN_CHECK to ensure compile time validation of
this
* daemon/libvirtd.c: Add explicit check on return value of virAsprintf
* src/conf/domain_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/network/bridge_driver.c: Add missing OOM check on virAsprintf
and report error
* src/qemu/qemu_conf.c: Add missing check on virParseMacAddr return
value status & report error
* src/security/security_selinux.c: Remove call to virRandomInitialize
that's done in libvirt.c already
* src/storage/storage_backend_logical.c: Add check & log on virRun
return status
* src/util/util.c: Add missing checks on virAsprintf/Run status
* src/util/util.h: Annotate all methods with ATTRIBUTE_RETURN_CHECK
if they return an error status code
* src/vbox/vbox_tmpl.c: Add missing check on virParseMacAddr
* src/xen/xm_internal.c: Add missing checks on virAsprintf
* tests/qemuargv2xmltest.c: Remove bogus call to virRandomInitialize()
The virDomainObjPtr object stores state about a running domain.
This object is shared across all drivers so it is not appropriate
to include driver specific state here. This patch adds the ability
to request a blob of private data per domain object instance. The
driver must provide a allocator & deallocator for this purpose
THis patch abuses the virCapabilitiesPtr structure for storing the
allocator/deallocator callbacks, since it is already being abused
for other internal things relating to parsing. This should be moved
out into a separate object at some point.
* src/conf/capabilities.h: Add privateDataAllocFunc and
privateDataFreeFunc fields
* src/conf/domain_conf.c: Invoke the driver allocators / deallocators
when creating/freeing virDomainObjPtr instances.
* src/conf/domain_conf.h: Pass virCapsPtr into virDomainAssignDef
to allow access to the driver specific allocator function
* src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/qemu/qemu_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c: Update for
change in virDomainAssignDef contract
__in6_u.__u6_addr16 is the private name for this struct member,
s6_addr16 is the public one
* src/util/network.c: dont use the private field, but the public one.
John Levon raised the issue that remoteIOEventLoop() poll call was
reissued after EINTR was caught making it uninterruptible.
* src/remote/remote_driver.c: catch EAGAIN instead as suggested by
Richard Jones
The current virDomainObjListPtr object stores domain objects in
an array. This means that to find a particular objects requires
O(n) time, and more critically acquiring O(n) mutex locks.
The new impl replaces the array with a virHashTable, keyed off
UUID. Finding a object based on UUID is now O(1) time, and only
requires a single mutex lock. Finding by name/id is unchanged
in complexity.
In changing this, all code which iterates over the array had
to be updated to use a hash table iterator function callback.
Several of the functions which were identically duplicating
across all drivers were pulled into domain_conf.c
* src/conf/domain_conf.h, src/conf/domain_conf.c: Change
virDomainObjListPtr to use virHashTable. Add a initializer
method virDomainObjListInit, and rename virDomainObjListFree
to virDomainObjListDeinit, since its not actually freeing
the container, only its contents. Also add some convenient
methods virDomainObjListGetInactiveNames,
virDomainObjListGetActiveIDs and virDomainObjListNumOfDomains
which can be used to implement the correspondingly named
public API entry points in drivers
* src/libvirt_private.syms: Export new methods from domain_conf.h
* src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_conf.c, src/openvz/openvz_driver.c,
src/qemu/qemu_driver.c, src/test/test_driver.c,
src/uml/uml_driver.c, src/vbox/vbox_tmpl.c: Update all code
to deal with hash tables instead of arrays for domains
We need to parse a source XML block for FindPoolSources, so this is a step
in sharing the parsing. The new storage pool XML 2 XML tests cover this area
pretty well to ensure we aren't causing regressions.
This patch adds an optional attribute to the <bootp> tag, that
allows to specify a TFTP server address other than the address of
the DHCP server itself.
This can be used to forward the BOOTP settings of the host down to the
guest. This is something that configurations such as Xen's default
network achieve naturally, but must be done manually for NAT.
* docs/formatnetwork.html.in: Document new attribute.
* docs/schemas/network.rng: Add it to schema.
* src/conf/network_conf.h: Add it to struct.
* src/conf/network_conf.c: Add it to parser and pretty printer.
* src/network/bridge_driver.c: Put it in the dnsmasq command line.
* tests/networkxml2xmlin/netboot-proxy-network.xml
tests/networkxml2xmlout/netboot-proxy-network.xml
tests/networkxml2xmltest.c: add new tests
In xenInotifyXendDomainsDirLookup() the wrong UUID variable is used
to search in the config info list.
In xenInotifyEvent() the event is dispatched if it's NULL.
Both were introduced in bc898df2c7.
We should always be using virGetHostname in place of
gethostname; thus add in a new syntax-check rule to make
sure no new uses creep in.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
We can slightly tighten up the regex's used to detect the use of
nonreentrant functions. We can also check src/util/virterror.c
by modifying a comment; I think it's worth it to get the additional
coverage.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
xenUnifiedDomainEventRegister() calls out to
virDomainEventCallbackListAdd(), which increments the reference
count on the connection. That is fine, but then
xenUnifiedDomainEventRegister() increments the usage count again,
leading to a usage count leak. Remove the increment in the xen
register, and the UnrefConnect in the xen unregister.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
If no matching device was found (cap == NULL) then no strdup() call
was made and *wwnn and *wwpn are untouched. Checking them for NULL
in this situation may result in reporting an false-positive OOM error
because *wwnn and *wwpn may be initialized to NULL by the caller.
Only check *wwnn and *wwpn for NULL if a matching device was found
(cap != NULL) and thus strdup() was called.
* src/conf/node_device_conf.c: only report an OOM error if there
really is one
virXPathNodeSet() could return -1 when doing an evaluation failure
due to xmlXPathEval() from libxml2 behaviour.
* src/util/xml.c: make sure we always return 0 unless the returned
XPath type is of the wrong type (meaning the query passed didn't
evaluate to a node set and code must be fixed)
https://bugzilla.redhat.com/show_bug.cgi?id=528575
virsh -c lxc:/// autostart vm1
was crashing the daemon
* src/lxc/lxc_conf.h src/lxc/lxc_conf.c: initialize the driver
autostartDir to avoid a NULL reference and implement autostart for LXC
Currently MAC address configuration of container veth is just ignored.
This patch implements the missing feature.
* src/lxc/veth.c, src/lxc/veth.h: add setMacAddr
* src/lxc/lxc_driver.c: set macaddr of container veth if specified
Most of the hash iterators need to modify either payload of
data args. The const annotation prevents this.
* src/util/hash.h, src/util/hash.c: Remove const-ness from
virHashForEach/Iterator
* src/xen/xm_internal.c: Remove bogus casts
A cgroup file returns integer value terminated with '\n' and remaining
it has sometimes harmful effects, for example it leads virStrToLong_ull
to fail.
* src/util/cgroup.c: strip out terminating \n when reading a value
If the the qemu and kvm binaries are the same, we don't include machine
types in the kvm domain info.
However, the code which refreshes the machine types info from the
previous capabilities structure first looks at the kvm domain's info,
finds it matches and then copies the empty machine types list over
for the top-level qemu domain.
That doesn't make sense, we shouldn't copy an empty machin types list.
* src/qemu/qemu_conf.c: qemudGetOldMachinesFromInfo(): don't copy an
empty machine types list.
* src/util/buf.c: if virBufferEscapeString was called on a buffer that
had 0 bytes of space, a size of -1 will be passed to snprintf, resulting
in a segmentation fault, this preallocate some space.
* src/conf/storage_conf.c src/conf/storage_conf.h: extend the enums
and values
* docs/schemas/storagepool.rng: add to the list of storage pool type
formats
Normally, when you migrate a domain from host A to host B,
the domain on host A remains defined but shutoff and the domain
on host B remains running but is a "transient". Add a new
flag to virDomainMigrate() to allow the original domain to be
undefined on source host A, and a new flag to virDomainMigrate() to
allow the new domain to be persisted on the destination host B.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
When specifying bridge delay via network XML define, we were looking for
the 'delay' attribute, but would dump the value as 'forwardDelay'. Have
the output match the expected input (and schema).
The fread_file_lim() function uses fread() but never handles
EINTR results, causing unexpected failures when reading QEMU
help arg info. It was unneccessarily using FILE * instead
of plain UNIX file handles, which prevented use of saferead()
* src/util/util.c: Switch fread_file_lim over to use saferead
instead of fread, remove FILE * use, and rename
$ sudo virsh pool-start idontexist
10:58:18.716: warning : processCallDispatchReply:7612 : Method call error
error: failed to get pool 'idontexist'
error: Storage pool not found: no pool with matching name 'idontexist'
That warning doesn't server much purpose being printed via a virsh call. So
remove the message.
The logic for running the decompression programs was broken in
commit f238709304, so that for
non-raw formats the decompression program was never run, and
for raw formats, it tried to exec an argv[] with initial NULL
in the program name.
* src/qemu/qemu_driver.c: Fix logic in runing decompression program
If one has e.g.
<guest>
<os_type>hvm</os_type>
<arch name='x86_64'>
<wordsize>64</wordsize>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<machine>pc-0.11</machine>
<machine canonical='pc-0.11'>pc</machine>
<machine>pc-0.10</machine>
<machine>isapc</machine>
<domain type='qemu'>
</domain>
<domain type='kvm'>
<emulator>/usr/bin/kvm</emulator>
<machine>pc</machine>
<machine>isapc</machine>
</domain>
</arch>
</guest>
and start a guest with:
<domain type='kvm'>
...
<os>
<type arch='x86_64'>hvm</type>
...
</os>
</domain>
then the default machine type should be 'pc' and not 'pc-0.11'
Issue was reported by Anton Protopopov.
* src/capabilities.[ch]: pass the domain type to
virCapabilitiesDefaultGuestArch() and use it to look up the default
machine type from a specific guest domain if needed.
* src/conf/domain_conf.c, src/xen/xm_internal.c: update
* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases2.xml: update
the domain type to 'kvm' and remove the machine type to check
that the default gets looked up correctly
Introduces several new public API options for migration
- VIR_MIGRATE_PEER2PEER: With this flag the client only
invokes the virDomainMigratePerform method, expecting
the source host driver to do whatever is required to
complete the entire migration process.
- VIR_MIGRATE_TUNNELLED: With this flag the actual data
for migration will be tunnelled over the libvirtd RPC
channel. This requires that VIR_MIGRATE_PEER2PEER is
also set.
- virDomainMigrateToURI: This is variant of the existing
virDomainMigrate method which does not require any
virConnectPtr for the destination host. Given suitable
driver support, this allows for all the same modes as
virDomainMigrate()
The URI for VIR_MIGRATE_PEER2PEER must be a valid libvirt
URI. For non-p2p migration a hypervisor specific migration
URI is used.
virDomainMigrateToURI without a PEER2PEER flag is only
support for Xen currently, and it involves XenD talking
directly to XenD, no libvirtd involved at all.
* include/libvirt/libvirt.h.in: Add VIR_MIGRATE_PEER2PEER
flag for migration
* src/libvirt_internal.h: Add feature flags for peer to
peer migration (VIR_FEATURE_MIGRATE_P2P) and direct
migration (VIR_MIGRATE_PEER2PEER mode)
* src/libvirt.c: Implement support for VIR_MIGRATE_PEER2PEER
and virDomainMigrateToURI APIs.
* src/xen/xen_driver.c: Advertise support for DIRECT migration
* src/xen/xend_internal.c: Add TODO item for p2p migration
* src/libvirt_public.syms: Export virDomainMigrateToURI
method
* src/qemu/qemu_driver.c: Add support for PEER2PEER and
migration, and adapt TUNNELLED migration.
* tools/virsh.c: Add --p2p and --direct args and use the
new virDomainMigrateToURI method where possible.
Re-arrange the doTunnelMigrate method putting all non-QEMU local
state setup steps first. This maximises chances of success before
then starting destination QEMU for receiving incoming migration.
Altogether this can reduce the number of goto cleanup labels to
something more managable.
* qemu/qemu_driver.c: Re-order steps in doTunnelMigrate
Simplify the doTunnelMigrate code by pulling out the code for
sending all tunnelled data into separate helper
* qemu/qemu_driver.c: introduce doTunnelSendAll() method
Simplify the doTunnelMigrate() method by pulling out the code
which opens/closes the virConnectPtr object into a parent
method
* qemu/qemu_driver.c: Add doPeer2PeerMigrate which then calls
doTunnelMigrate with dconn & dom_xml
virStreamAbort is needed when the caller wishes to terminate
the stream early, not when virStreamSend fails.
* qemu/qemu_driver.c: Fix calling of virStreamAbort during
tunnelled migration
The code for tunnelled migration was added in a dedicated method,
but the native migration code is still inline in the top level
qemudDomainMigratePerform() API. Move the native code out into
a dedicated method too to make things more maintainable.
* src/qemu/qemu_driver.c: Pull code for performing a native
QEMU migration out into separate method
The code for tunnelled migration wierdly required the app to pass
a NULL 'dconn' parameter, only to have to use virConnectOpen
itself shortly thereafter to get a 'dconn' object. Remove this
bogus check & require the app to always pas 'dconn' as before
* src/libvirt.c: Require 'dconn' for virDomainMigrate calls again
and remove call to virConnectOpen
Since virMigratePrepareTunnel() is used for migration over the
native libvirt connection, there is never any need to pass the
target URI to this method.
* daemon/remote.c, src/driver.h, src/libvirt.c, src/libvirt_internal.h,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/remote/remote_protocol.c, src/remote/remote_protocol.h,
src/remote/remote_protocol.x: Remove 'uri_in' parameter from
virMigratePrepareTunnel() method
Move the VIR_DRV_FEATURE* constants into libvirt_internal.h
since these flags are indicating whether APIs in the
libvirt_internal.h file are supported by a driver
* src/driver.h: Remove VIR_DRV_FEATURE* constants
* src/libvirt_internal.h: Add VIR_DRV_FEATURE* constants, using
an enum instead of #define
* src/internal.h: pull in libvirt_internal.h
* src/lxc/lxc.conf: new configuration file, there is currently one
tunable "log_with_libvirtd" that controls whether an lxc controller will
log only to the container log file, or whether it will honor libvirtd's
log output configuration. This provides a way to have libvirtd and its
children log to a single file. The default is to log to the container
log file.
* src/Makefile.am libvirt.spec.in: add the new file
* src/lxc/lxc_conf.[ch] src/lxc/lxc_driver.c: read the new log value
from the configuration file and pass the log informations when
starting up a container.
* src/lxc/lxc_driver.c src/lxc/lxc_controller.c: before launching the
lxc controller, have the lxc driver query the log settings and setup
envp[]. This provides the advantage of honoring the actual log
configuration instead of only what had been set in the environment.
The lxc controller now simply has to call virLogSetFromEnv().
When configuring logging settings, keep more information about the
output destination. Add accessors to retrieve the filter and output
settings in the original string form; this to be used to set up
environment for a child process that also logs.
* src/util/logging.[ch]: add virLogGetFilters and virLogGetOutputs
accessors and modify the internals (including virLogDefineOutput())
to save the data needed for the accessors
* src/util/util.[ch]: Add virFileAbsPath() function to ensure an
absolute path for a potentially realtive path.
* src/libvirt_private.syms: add it in libvirt private symbols
* configure.in: look for AppArmor and devel
* src/security/security_apparmor.[ch] src/security/security_driver.c
src/Makefile.am: add and plug the new driver
* src/security/virt-aa-helper.c: new binary which is used exclusively by
the AppArmor security driver to manipulate AppArmor.
* po/POTFILES.in: registers the new files
* tests/Makefile.am tests/secaatest.c tests/virt-aa-helper-test:
tests for virt-aa-helper and the security driver, secaatest.c is
identical to seclabeltest.c except it initializes the 'apparmor'
driver instead of 'selinux'
The patch implements the missing memory control APIs for lxc, i.e.,
domainGetMaxMemory, domainSetMaxMemory, domainSetMemory, and improves
domainGetInfo to return proper amount of used memory via cgroup.
* src/libvirt_private.syms: Export virCgroupGetMemoryUsage
and add missing virCgroupSetMemory
* src/lxc/lxc_driver.c: Implement missing memory functions
* src/util/cgroup.c, src/util/cgroup.h: Add the function
to get used memory
When James Morris originally submitted his sVirt patches (as seen in
libvirt 0.6.1), he did not require on disk labelling for
virSecurityDomainRestoreImageLabel. A later commit[2] changed this
behavior to assume on disk labelling, which halts implementations for
path-based MAC systems such as AppArmor and TOMOYO where
vm->def->seclabel is required to obtain the label.
* src/security/security_driver.h src/qemu/qemu_driver.c
src/security/security_selinux.c: adds the 'virDomainObjPtr vm'
argument back to *RestoreImageLabel
Add virNodeDeviceParseFile, and make virNodeDeviceParseNode non-static. These
will be used by the test driver.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Add a simple 'computer' device for the default driver. Only implement
the basic calls, no creation or destroy happening.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Fix migration, broken in two different ways by the QEMU monitor
abstraction. Note that the QEMU console emits a "\r\n" as the
line-ending.
* src/qemu/qemu_monitor_text.c (qemuMonitorGetMigrationStatus):
Fix "info migrate" command and its output's parsing.
Implementation of tunnelled migration, using a Unix Domain Socket
on the qemu backend. Note that this requires very new versions of
qemu (0.10.7 at least) in order to get the appropriate bugfixes.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
The upcoming tunnelled migration needs to be able to set
a migration in progress in the background, as well as
be able to cancel a migration when a problem has happened.
This patch allows for both of these to properly work.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
A simple misplaced break out of a switch results in:
libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./vendor': No such file or directory
libvir: error : Failed to open file '/sys/bus/pci/devices/0000:00:54c./device': No such file or directory
libvir: error : this function is not supported by the hypervisor: Failed to read product/vendor ID for 0000:00:54c.
when trying to passthrough a USB host device to qemu.
* src/security_selinux.c: fix a switch/break thinko
* src/conf/domain_conf.c: a simple typo in an XML domain file could lead
to a crash, because we called STRPREFIX() on the looked up value without
checking it was non-null.
* src/conf/domain_conf.c: when declaring a <interface type="bridge">
tag, <source> needs a "bridge" attribute, but the parser complains
about a missing "dev" attribute.
* docs/schemas/domain.rng: allow one <description> tag in the top level
of the <domain> to store user information as text
* src/conf/domain_conf.c src/conf/domain_conf.h: extend the structure
to store this text, grab it at parse time and save it back when
present after <uuid>
Function comments for virStreamEvent{Add,Update,Remove}Callback() are
missing a trailing ':'. Therefore apibuild.py fails to parse the comment
and warns about the missing ':'.
* docs/libvirt-api.xml, docs/libvirt-refs.xml: updated by apibuild.py
* src/libvirt.c: add missing ':' in function comments
Use virStorageFileGetMetadata() to find any backing stores for images
and re-label them
Without this, qemu cannot access qcow2 backing files, see:
https://bugzilla.redhat.com/497131
* src/security/security_selinux.c: re-label backing store files in
SELinuxSetSecurityImageLabel()
Finally, we get to the point of all this.
Move virStorageGetMetadataFromFD() to virStorageFileGetMetadataFromFD()
and move to src/util/storage_file.[ch]
There's no functional changes in this patch, just code movement
* src/storage/storage_backend_fs.c: move code from here ...
* src/util/storage_file.[ch]: ... to here
* src/libvirt_private.syms: export virStorageFileGetMetadataFromFD()
Introduce a metadata structure and make virStorageGetMetadataFromFD()
fill it in.
* src/util/storage_file.h: add virStorageFileMetadata
* src/backend/storage_backend_fs.c: virStorageGetMetadataFromFD() now
fills in the virStorageFileMetadata structure
Prepare the code probing a file's format and associated metadata for
moving into libvirt_util.
* src/storage/storage_backend_fs.c: re-factor the format and metadata
probing code in preparation for moving it
Rename virStorageVolFormatFileSystem to virStorageFileFormat and
move to src/util/storage_file.[ch]
* src/Makefile.am: add src/util/storage_file.[ch]
* src/conf/storage_conf.[ch]: move enum from here ...
* src/util/storage_file.[ch]: .. to here
* src/libvirt_private.syms: update To/FromString exports
* src/storage/storage_backend.c, src/storage/storage_backend_fs.c,
src/vbox/vbox_tmpl.c: update for above changes
When using VNC for graphics + keyboard + mouse, we shouldn't
then use the host OS for audio. Audio should go back over
VNC.
When using SDL for graphics, we should use the host OS for
audio since that's where the display is. We need to allow
certain QEMU env variables to be passed through to guest
too to allow choice of QEMU audio backend.
* qemud/libvirtd.sysconf: Mention QEMU/SDL audio env vars
* src/qemu_conf.c: Passthrough QEMU/SDL audio env for SDL display,
disable host audio for VNC display
Defines the extensions to the remote protocol for generic
data streams. Adds a bunch of helper code to the libvirtd
daemon for working with data streams.
* daemon/Makefile.am: Add stream.c/stream.h to build
* daemon/stream.c, qemud/stream.h: Generic helper functions for
creating new streams, associating streams with clients, finding
existing streams for a client and removing/deleting streams.
* src/remote/remote_protocol.x: Add a new 'REMOTE_STREAM' constant
for the 'enum remote_message_type' for encoding stream data
in wire messages. Add a new 'REMOTE_CONTINUE' constant to
'enum remote_message_status' to indicate further data stream
messsages are expected to follow. Document how the
remote_message_header is used to encode data streams
* src/remote/remote_protocol.h: Regenerate
* daemon/dispatch.c: Remove assumption that a error message
sent to client is always type=REMOTE_REPLY. It may now
also be type=REMOTE_STREAM. Add convenient method for
sending outgoing stream data packets. Log and ignore
non-filtered incoming stream packets. Add a method for
serializing a stream error message
* daemon/dispatch.h: Add API for serializing stream errors
and sending stream data packets
* daemon/qemud.h: Add struct qemud_client_stream for tracking
active data streams for clients. Tweak filter function
operation so that it accepts a client object too.
* daemon/qemud.c: Refactor code for free'ing message objects
which have been fully transmitted into separate method.
Release all active streams when client shuts down. Change
filter function to be responsible for queueing the message
* include/libvirt/libvirt.h.in: Public API contract for
virStreamPtr object
* src/libvirt_public.syms: Export data stream APIs
* src/libvirt_private.syms: Export internal helper APIs
* src/libvirt.c: Data stream API driver dispatch
* src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr
object
* src/driver.h: Define internal driver API for streams
* .x-sc_avoid_write: Ignore src/libvirt.c because it trips
up on comments including write()
* python/Makefile.am: Add libvirt-override-virStream.py
* python/generator.py: Add rules for virStreamPtr class
* python/typewrappers.h, python/typewrappers.c: Wrapper
for virStreamPtr
* docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate
with new APIs
* src/qemu/qemu_monitor_text.c: Always print command and reply
in qemuMonitorCommandWithHandler. Print all args in each monitor
command API & remove redundant relpy printing
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new
qemuMonitorRemoveHostNetwork() command for removing host
networks
* src/qemu/qemu_driver.c: Convert NIC hotplug methods over
to use qemuMonitorRemoveHostNetwork()
* src/qemu/qemu_conf.h, src/qemu/qemu_conf.c: Remove prefix arg
from qemuBuildHostNetStr which is no longer required
* src/qemu/qemu_driver.c: Refactor to use qemuMonitorAddHostNetwork()
API for adding host network
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddHostNetwork() method for adding host networks
* src/qemu/qemu_conf.c: Remove separator from qemuBuildNicStr()
args, and remove hardcoded 'nic' prefix. Leave it upto callers
instead
* src/qemu/qemu_driver.c: Switch over to using the new
qemuMonitorAddPCINetwork() method for NIC hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddPCINetwork API for PCI network device hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle
APIs for processing file handles
* src/qemu/qemu_driver.c: Convert NIC hotplug method over to
use qemuMonitorCloseFileHandle and qemuMonitorSendFileHandle
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
API qemuMonitorAddPCIDisk()
* src/qemu/qemu_driver.c: Convert over to using the new
qemuMonitorAddPCIDisk() method, and remove now obsolete
qemudEscape() method
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API
qemuMonitorRemovePCIDevice() for removing PCI device
* src/qemu/qemu_driver.c: Convert all places removing PCI devices
over to new qemuMonitorRemovePCIDevice() API
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
API qemuMonitorAddPCIHostDevice()
* src/qemu/qemu_driver.c: Switch to using qemuMonitorAddPCIHostDevice()
for PCI host device hotplug
One API adds an exact device based on bus+dev, the other adds
any device matching vendor+product
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch()
commands.
* src/qemu/qemu_driver.c: Switch over to using the new
qemuMonitorAddUSBDeviceExact() and qemuMonitorAddUSBDeviceMatch()
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorAddUSBDisk() API
* src/qemu/qemu_driver.c: Switch USB disk hotplug to the new
src/qemu/qemu_driver.c API.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorMigrateToCommand() API
* src/qemu/qemu_driver.c: Switch over to using the
qemuMonitorMigrateToCommand() API for core dumps and save
to file APIs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new API
qemuMonitorMigrateToHost() for doing TCP migration
* src/qemu/qemu_driver.c: Convert to use qemuMonitorMigrateToHost().
Also handle proper URIs (tcp:// as well as tcp:)
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorGetMigrationStatus() command.
* src/qemu/qemu_driver.c: Use new qemuMonitorGetMigrationStatus()
command to check completion status.
* src/qemu/qemu_driver.c: Use new qemuMonitorSetMigrationSpeed()
API during migration
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new
qemuMonitorSetMigrationSpeed() API
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new
qemuMonitorGetBlockStatsInfo() command
* src/qemu/qemu_driver.c: Remove directly use of blockstats in
favour of calling qemuMonitorGetBlockStatsInfo()
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add new APIs
qemuMonitorSaveVirtualMemory() and qemuMonitorSavePhysicalMemory()
* src/qemu/qemu_driver.c: Use the new qemuMonitorSaveVirtualMemory()
and qemuMonitorSavePhysicalMemory() APIs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new APis
qemuMonitorChangeMedia and qemuMonitorEjectMedia. Pull in code
for qemudEscape
* src/qemu/qemu_driver.c: Remove code that directly issues 'eject'
and 'change' commands in favour of API calls.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add new
qemuMonitorSetBalloon() based on existing code in
qemudDomainSetMemoryBalloon
* src/qemu/qemu_driver.c: Remove use of qemudDomainSetMemoryBalloon()
in favour of qemuMonitorSetBalloon(). Fix error code when balloon
is not supported
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Pull old
qemudDomainGetMemoryBalloon() code into a new method called
qemuMonitorGetBalloonInfo()
* src/qemu/qemu_driver.c: Update to call qemuMonitorGetBalloonInfo()
and remove qemudDomainGetMemoryBalloon().
* src/qemu/qemu_driver.c: Remove use of 'system_powerdown'
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add a new
qemuMonitorSystemPowerdown() api call
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a new
qemuMonitorStopCPUs() API
* src/qemu/qemu_driver.c: Replace direct monitor commands for 'stop'
with qemuMonitorStopCPUs()
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Rename
Rename qemudMonitorSendCont to qemuMonitorStartCPUs
* src/qemu/qemu_driver.c: Update callers for new name
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a
new qemuMonitorSetVNCPassword() API
* src/qemu/qemu_driver.c: Refactor qemudInitPasswords to
call qemuMonitorSetVNCPassword()
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Add a new
qemuMonitorGetCPUInfo() command
* src/qemu/qemu_driver.c: Refactor qemudDetectVcpuPIDs to
use qemuMonitorGetCPUInfo()
Pull out all the QEMU monitor interaction code to a separate
file. This will make life easier when we need to drop in a
new implementation for the forthcoming QMP machine friendly
monitor support.
Next step is to add formal APIs for each monitor command,
and remove direct commands for sending/receiving generic
data.
* src/Makefile.am: Add qemu_monitor.c to build
* src/qemu/qemu_driver.c: Remove code for monitor interaction
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: New
file for monitor interaction
* po/POTFILES.in: Add src/qemu/qemu_monitor_text.c
* src/conf/interface_conf.c: This was causing subsequent calls to
virXPathxxx() to fail, since ctxt->node was left pointing at the
dhcp node, rather than the protocol node.
* src/util/xml.c: The virXPath... function take extra care to preserve
the XPath context node (ctxt->node) but in the case of virXPathString
and virXPathBoolean they forgot to do this on the error path. This
patch fixes this and move all ctxt->node = relnode instuctions just
after the xmlXPathEval() to make sure this doesn't happen if this code
is modified.
The python method help docs are copied across from the C
funtion comments, but in the process all line breaks and
indentation was being lost. This made the resulting text
and code examples completely unreadable. Both the API
doc extractor and the python generator were destroying
whitespace & this fixes them to preserve it exactly.
* docs/apibuild.py: Preserve all whitespace when extracting
function comments. Print function comment inside a <![CDATA[
section to fully preserve all whitespace. Look for the
word 'returns' to describe return values, instead of 'return'
to avoid getting confused with code examples including the
C 'return' statement.
* python/generator.py: Preserve all whitespace when printing
function help docs
* src/libvirt.c: Change any return parameter indicated by
'return' to be 'returns', to avoid confusing the API extractor
* docs/libvirt-api.xml: Re-build for fixed descriptions
An inaccessible datastore has no valid URL property so don't
access its URI property.
* src/esx/esx_vi.c: esxVI_LookupDatastoreByName(): check if datastore is
accessible before accessing its URL property
* src/esx/esx_vmx.c: update to changed datastore properties
A given domain XML gets converted to a VMX config, uploaded to the host
and registered as new virtual machine.
* src/esx/esx_driver.c: refactor datastore related path parsing into
esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_util.[ch]: add esxUtil_ParseDatastoreRelatedPath()
* src/esx/esx_vi.[ch]: add esxVI_Context_UploadFile(), add datastores to
the traversal in esxVI_BuildFullTraversalSpecList(), add
esxVI_LookupDatastoreByName()
* src/esx/esx_vi_methods.[ch]: add esxVI_RegisterVM_Task()
* src/esx/esx_vi_types.c: make some error message more verbose
* src/esx/esx_vmx.[ch]: add esxVMX_AbsolutePathToDatastoreRelatedPath()
to convert a path into a datastore related path, add esxVMX_ParseFileName()
to convert from VMX path format to domain XML path format, extend the other
parsing function to be datastore aware, add esxVMX_FormatFileName() to
convert from domain XML path format to VMX path format, fix VMX ethernet
entry formating
* tests/esxutilstest.c: add test for esxUtil_ParseDatastoreRelatedPath()
* tests/vmx2xmldata/*: update domain XML files to use datastore related paths
* tests/xml2vmxdata/*: update domain XML files to use datastore related paths,
update VMX files to use absolute paths
Add esxVI_Occurence enum to describe expected occurence of items
* src/esx/esx_driver.c: update the use of esxVI_LookupVirtualMachineByUuid()
* src/esx/esx_vi.c: add an esxVI_Occurence parameter to
esxVI_LookupVirtualMachineByUuid() and take care if esxVI_FindByUuid()
can't find anything for a given uuid
* src/esx/esx_vi.h: add esxVI_Occurence enum
* src/esx/esx_vi_methods.c: expect null or more items to be returned
from esxVI_FindByUuid()
* src/esx/esx_driver.c: add esxSupportsLongMode() and update esxCapsInit()
* src/esx/esx_vi.[ch]: Add AnyType handling for lists
* src/esx/esx_vi_types.c: bind VI type HostCpuIdInfo
Extend and cleanup the VMX to domain XML mapping. Add the domain XML to
VMX mapping functions.
* src/esx/esx_driver.c: add esxDomainXMLToNative()
* src/esx/esx_vmx.[ch]: add esxVMX_SCSIDiskNameToControllerAndID(),
esxVMX_IDEDiskNameToControllerAndID(), esxVMX_FloppyDiskNameToController(),
esxVMX_GatherSCSIControllers(), add basic handling for the VMX guestOS entry
to distinguish between i686 and x86_64, make SCSI virtualDev VMX entry
optional as it should be, map the VMX networkName entry to the domain XML
interface bridge name, add basic mapping for serial devices in pipe mode,
add several esxVMX_Format*() functions
This enables the auth callback to automatically distinguish between
requests for ESX host and vCenter credentials.
* src/esx/esx_util.[ch]: set challenge for auth callback to hostname
* src/esx/esx_driver.c: add esxNodeGetFreeMemory(), cache IP address
* src/esx/esx_vi.[ch]: refactor resource pool query into esxVI_GetResourcePool()
* src/esx/esx_vi_types.[ch]: bind VI type ResourcePoolResourceUsage
Currently, libvirtd will start a dnsmasq process for the virtual
network, but (aside from killing the dnsmasq process and replacing it),
there's no way to define tftp boot options.
This change introduces the appropriate tags to the dhcp configuration:
<network>
<name>default</name>
<bridge name="virbr%d" />
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<tftp root="/var/lib/tftproot" />
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
<bootp file="pxeboot.img"/>
</dhcp>
</ip>
</network>
When the attributes are present, these are passed to the
arguments to dnsmasq:
dnsmasq [...] --enable-tftp --tftp-root /srv/tftp --dhcp-boot pxeboot.img
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^
from <tftp /> from <bootp />
At present, only local tftp servers are supported (ie, dnsmasq runs as
the tftp server), but we could improve this in future by adding a
server= attribute.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2009-09-21 Paolo Bonzini <pbonzini@redhat.com>
Jeremy Kerr <jk@ozlabs.org>
* docs/formatnetwork.html.in: Document new tags.
* docs/formatnetwork.html: Regenerate.
* docs/schemas/network.rng: Update.
* src/network_conf.c (virNetworkDefFree): Free new fields.
(virNetworkDHCPRangeDefParseXML): Parse <bootp>.
(virNetworkIPParseXML): New, parsing <dhcp> and <tftp>.
(virNetworkDefParseXML): Use virNetworkIPParseXML instead of
virNetworkDHCPRangeDefParseXML.
(virNetworkDefFormat): Pretty print new fields.
* src/network_conf.h (struct _virNetworkDef): Add netboot fields.
* src/network_driver.c (networkBuildDnsmasqArgv): Add
TFTP and BOOTP arguments.
* tests/Makefile.am (EXTRA_DIST): Add networkschemadata.
* tests/networkschematest: Look in networkschemadata.
* tests/networkschemadata/netboot-network.xml: New.
Add the virStrncpy function, which takes a dst string, source string,
the number of bytes to copy and the number of bytes available in the
dest string. If the source string is too large to fit into the
destination string, including the \0 byte, then no data is copied and
the function returns NULL. Otherwise, this function copies n bytes
from source into dst, including the \0, and returns a pointer to the
dst string. This function is intended to replace all unsafe uses
of strncpy in the code base, since strncpy does *not* guarantee that
the buffer terminates with a \0.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Latest upstream QEMU can be built with Xen support, which introduces
a -xen-domid argument. This was mistakenly detected as -domid due
to old Xenner support. Adapt to cope with both syntax. Also only
set domid if the virt type is xen, or the guest type is xen
* src/qemu_conf.c, src/qemu_conf.h: Detect new -xen-domid flag in
preference to -domid.
* tests/qemuxml2argvdata/qemuxml2argv-bootloader.args,
tests/qemuxml2argvdata/qemuxml2argv-input-xen.args: Add missing
-domid param
* tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args: Remove bogus
-boot param.
* tests/qemuxml2argvtest.c: Add missing QEMUD_CMD_FLAG_DOMID params
The commit cb51aa48a7 "Fix up connection
reference counting." changed the driver closing and virConnectPtr
unref-logic in virConnectClose().
Before this commit virConnectClose() closed all drivers of the given
virConnectPtr and virUnrefConnect()'ed it afterwards. After this
commit the driver-closing is done in virUnrefConnect() if and only if
the ref-count of the virConnectPtr dropped to zero.
This change in execution order leads to a virConnectPtr leak, at least
for connections to Xen.
The relevant call sequences:
virConnectOpen() -> xenUnifiedOpen() ...
... xenInotifyOpen() -> virConnectRef(conn)
... xenStoreOpen() -> xenStoreAddWatch() -> conn->refs++
virConnectClose() -> xenUnifiedClose() ...
... xenInotifyClose() -> virUnrefConnect(conn)
... xenStoreClose() -> xenStoreRemoveWatch() -> virUnrefConnect(conn)
Before the commit this additional virConnectRef/virUnrefConnect calls
where no problem, because virConnectClose() closed the drivers
explicitly and the additional refs added by the Xen subdrivers were
removed properly. After the commit this additional refs result in a
virConnectPtr leak (including a leak of the hypercall file handle;
that's how I noticed this problem), because now the drivers are only
close if and only if the ref-count drops to zero, but this cannot
happen anymore, because the additional refs from the Xen subdrivers
would only be removed if the drivers get closed, but that doesn't
happen because the ref-count cannot drop to zero.
The fix for this problem is simple: remove the
virConnectRef/virUnrefConnect calls from the Xen subdrivers (see
attached patch). Maybe someone could explain why the Xen Inotify and
Xen Store driver do this extra ref-counting, but none of the other Xen
subdrivers. It seems unnecessary to me and can be removed without
problems.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
* src/conf/domain_conf.c: Don't assume all virDomainObjPtr have
a non-NULL monitor_chr field in virDomainObjFormat.
* src/lxc/lxc_driver.c: Implement suspend/resume driver APis
* src/util/cgroup.c, src/util/cgroup.h: Support the 'freezer'
cgroup controller
* src/libvirt_private.syms: Export virCgroupSetFreezerState
and virCgroupGetFreezerState
When making changes to the remote protocol, src/ is always built
first, so rpcgen should live there, to avoid having to run make
in the 'daemon/' directory before building src/
* src/Makefile.am: Add rules for rpcgen, and drop -I../daemon from
remote client build
* daemon/Makefile.am: Add -I../src/remote/ to libvirtd build
and remove rpcgen rules
* daemon/libvirtd.c: Adapt include of remote_driver.h taking
into account new -I flag
* daemon/remote_protocol.c, daemon/remote_protocol.h,
daemon/remote_protocol.x: Move to src/remote/
* daemon/rpcgen_fix.pl: Move to src/remote/rpcgen_fix.pl
* src/capabilities.c, src/capabilities.h, src/domain_conf.c,
src/domain_conf.h, src/domain_event.c, src/domain_event.h,
src/interface_conf.c, src/interface_conf.h,
src/network_conf.c, src/network_conf.h, src/node_device_conf.c,
src/node_device_conf.h, src/secret_conf.c, src/secret_conf.h,
src/storage_conf.c, src/storage_conf.h, src/storage_encryption_conf.c,
src/storage_encryption_conf.h: Move to src/conf/
* src/Makefile.am: Add -Isrc/conf to the individual build targets
which need to use XML config APIs. Remove LIBXML_CFLAGS, LIBSSH2_CFLAGS
and SELINUX_CFLAGS from global INCLUDES and only have them in build
targets which actually need them. Create a libvirt_conf.la
convenience library for all config parsers
* src/hostusb.h: Remove bogus include of domain_conf.h
* tests/Makefile.am: Add -Isrc/conf. Remove bogus -I$builddir/src
since it never has any generated header files
* daemon/Makefile.am: Add -Isrc/conf
* proxy/Makefile.am: Add -Isrc/conf and cope with renamed files
* src/hash.c: Remove bogus include of libxml/threads.h
* daemon/default-network.xml: Move to src/network/default.xml
* daemon/libvirtd_qemu.aug, daemon/test_libvirtd_qemu.aug: Move
to src/qemu/
* src/qemu.conf: Move to src/qemu/qemu.conf
* daemon/Makefile.am: Remove rules for default-nmetwork.xml and
libvirtd_qemu.aug and test_libvirtd_qemu.aug. Fix typo in
uninstall-local that would install polkit again.
* src/Makefile.am: Add rules for installing network/default.xml
and the qemu/*.aug files. Add test case for QEMU augeas files.
Add uninstall-local rule for files/directories created during
install. Rename install-exec-local to install-data-local.
Only install qemu.conf if WITH_QEMU is set.
* tests/networkschematest: Update for XML location move
Move the virsh tool and its man page into the tools directory
* Makefile.am: Remove rules for virsh.1 man page
* virsh.1: Remove auto-generated file
* docs/Makefile.am: Remove rules for virsh.pod man page
* docs/virsh.pod: Move to tools/ directory
* src/Makefile.am, src/.gitignore: Remove rules for virsh
* src/console.c, src/console.h, src/*.ico, src/virsh_win_icon.rc,
src/virsh.c: Move into tools/ directory
* tools/Makefile.am: Add rules for building virsh
* tools/.gitignore: Ignore virsh built files
* tests/virshtest.c, tests/int-overflow: Update for new
virsh location
