Commit Graph

174 Commits

Author SHA1 Message Date
Lai Jiangshan
e40725779c qemu: send-key: Implement the driver methods
qemu driver just accept xt_kbd codeset's keycode, so the lib virtkey
is used for translating keycodes from other codesets
2011-07-21 15:58:31 +08:00
Daniel P. Berrange
7760eaa050 Add monitor API for checking whether KVM is enabled
When attaching to an external QEMU process, it is neccessary
to check if the process is using KVM or not. This can be done
using a monitor command

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  API for checking if KVM is enabled
2011-07-12 15:39:04 +01:00
Eric Blake
3c2f0a17e2 Revert "Implement virDomainBlockPull for the qemu driver"
This reverts commit 784ee08d22.
2011-06-24 08:41:25 -06:00
Daniel P. Berrange
42f43592be Support reboots with the QEMU driver
For controlled shutdown we issue a 'system_powerdown' command
to the QEMU monitor. This triggers an ACPI event which (most)
guest OS wire up to a controlled shutdown. There is no equiv
ACPI event to trigger a controlled reboot. This patch attempts
to fake a reboot.

 - In qemuDomainObjPrivatePtr we have a bool fakeReboot
   flag.
 - The virDomainReboot method sets this flag and then
   triggers a normal 'system_powerdown'.
 - The QEMU process is started with '-no-shutdown'
   so that the guest CPUs pause when it powers off the
   guest
 - When we receive the 'POWEROFF' event from QEMU JSON
   monitor if fakeReboot is not set we invoke the
   qemuProcessKill command and shutdown continues
   normally
 - If fakeReboot was set, we spawn a background thread
   which issues 'system_reset' to perform a warm reboot
   of the guest hardware. Then it issues 'cont' to
   start the CPUs again

* src/qemu/qemu_command.c: Add -no-shutdown flag if
  we have JSON support
* src/qemu/qemu_domain.h: Add 'fakeReboot' flag to
  qemuDomainObjPrivate struct
* src/qemu/qemu_driver.c: Fake reboot using the
  system_powerdown command if JSON support is available
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  binding for system_reset command
* src/qemu/qemu_process.c: Reset the guest & start CPUs if
  fakeReboot is set
2011-06-24 12:13:47 +01:00
Adam Litke
784ee08d22 Implement virDomainBlockPull for the qemu driver
The virDomainBlockPull* family of commands are enabled by the
'block_stream' and 'info block_stream' qemu monitor commands.

* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement disk
  streaming by using the stream and info stream text monitor commands
* src/qemu/qemu_monitor_json.[ch]: implement commands using the qmp monitor

Signed-off-by: Adam Litke <agl@us.ibm.com>
Acked-by: Daniel P. Berrange <berrange@redhat.com>
2011-06-14 22:02:06 -06:00
Osier Yang
41514f7b3e qemu: Parse current balloon value returned by query_balloon
Qemu once supported following memory stats which will returned by
"query_balloon":

    stat_put(dict, "actual", actual);
    stat_put(dict, "mem_swapped_in", dev->stats[VIRTIO_BALLOON_S_SWAP_IN]);
    stat_put(dict, "mem_swapped_out", dev->stats[VIRTIO_BALLOON_S_SWAP_OUT]);
    stat_put(dict, "major_page_faults", dev->stats[VIRTIO_BALLOON_S_MAJFLT]);
    stat_put(dict, "minor_page_faults", dev->stats[VIRTIO_BALLOON_S_MINFLT]);
    stat_put(dict, "free_mem", dev->stats[VIRTIO_BALLOON_S_MEMFREE]);
    stat_put(dict, "total_mem", dev->stats[VIRTIO_BALLOON_S_MEMTOT]);

But it later disabled all the stats except "actual" by commit
07b0403dfc2b2ac179ae5b48105096cc2d03375a.

libvirt doesn't parse "actual", so user will always see a empty result
with "virsh dommemstat $domain". Even qemu haven't disabled the stats,
we should support parsing "actual".
2011-06-14 11:21:35 +08:00
Daniel P. Berrange
80d2038d58 Issue full error messages when processing QEMU monitor I/O
Currently the QEMU monitor I/O handler code uses errno values
to report errors. This results in a sub-optimal error messages
on certain conditions, in particular when parsing JSON strings
malformed data simply results in 'EINVAL'.

This changes the code to use the standard libvirt error reporting
APIs. The virError is stored against the qemuMonitorPtr struct,
and when a monitor API is run, any existing stored error is copied
into that thread's error local

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Use
  virError APIs for all monitor I/O handling code
2011-05-29 20:51:08 +08:00
Daniel P. Berrange
cc53b4c444 Wire up SPICE client relocation with QEMU migration
Use the graphics information from the QEMU migration cookie to
issue a 'client_migrate_info' monitor command to QEMU. This causes
the SPICE client to automatically reconnect to the target host
when migration completes

* src/qemu/qemu_migration.c: Set data for SPICE client relocation
  before starting migration on src
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  new qemuMonitorGraphicsRelocate() command
2011-05-16 15:18:22 +01:00
Jiri Denemark
9f1319618a qemu: Update domain state when reconnecting monitor
A qemu domain can get paused when libvirtd is stopped (e.g., because of
I/O error) so we should check its current state when reconnecting to it.
2011-05-16 13:36:08 +02:00
Michal Privoznik
9936aecfd1 qemu: Implement the driver methods
* src/qemu/qemu_driver.c: new qemuDomainScreenshot() function
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Monitor command
2011-05-13 12:45:42 +02:00
Lai Jiangshan
b65f37a4a1 libvirt,logging: cleanup VIR_XXX0()
These VIR_XXXX0 APIs make us confused, use the non-0-suffix APIs instead.

How do these coversions works? The magic is using the gcc extension of ##.
When __VA_ARGS__ is empty, "##" will swallow the "," in "fmt," to
avoid compile error.

example: origin				after CPP
	high_level_api("%d", a_int)	low_level_api("%d", a_int)
	high_level_api("a  string")	low_level_api("a  string")

About 400 conversions.

8 special conversions:
VIR_XXXX0("") -> VIR_XXXX("msg") (avoid empty format) 2 conversions
VIR_XXXX0(string_literal_with_%) -> VIR_XXXX(%->%%) 0 conversions
VIR_XXXX0(non_string_literal) -> VIR_XXXX("%s", non_string_literal)
  (for security) 6 conversions

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
2011-05-11 12:41:14 -06:00
Eric Blake
4c6ae9ae36 build: remove some dead assignments
No syntactic effect; this merely silences some clang warnings.

* src/libxl/libxl_driver.c (libxlDomainSetVcpusFlags): Drop
redundant ret=0 statement.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextDriveDel):
Likewise.
2011-05-11 10:43:13 -06:00
Lai Jiangshan
fcf967f2ad qemu,inject-nmi: Implement the driver methods 2011-05-10 11:40:51 -06:00
Eric Blake
0d166c6b7c build: detect potentential uninitialized variables
Even with -Wuninitialized (which is part of autobuild.sh
--enable-compile-warnings=error), gcc does NOT catch this
use of an uninitialized variable:

{
  if (cond)
    goto error;
  int a = 1;
error:
  printf("%d", a);
}

which prints 0 (supposing the stack started life wiped) if
cond was true.  Clang will catch it, but we don't use clang
as often.  Using gcc -Wjump-misses-init catches it, but also
gives false positives:

{
  if (cond)
    goto error;
  int a = 1;
  return a;
error:
  return 0;
}

Here, a was never used in the scope of the error block, so
declaring it after goto is technically fine (and clang agrees).
However, given that our HACKING already documents a preference
to C89 decl-before-statement, the false positive warning is
enough of a prod to comply with HACKING.

[Personally, I'd _really_ rather use C99 decl-after-statement
to minimize scope, but until gcc can efficiently and reliably
catch scoping and uninitialized usage bugs, I'll settle with
the compromise of enforcing a coding standard that happens to
reject false positives if it can also detect real bugs.]

* acinclude.m4 (LIBVIRT_COMPILE_WARNINGS): Add -Wjump-misses-init.
* src/util/util.c (__virExec): Adjust offenders.
* src/conf/domain_conf.c (virDomainTimerDefParseXML): Likewise.
* src/remote/remote_driver.c (doRemoteOpen): Likewise.
* src/phyp/phyp_driver.c (phypGetLparNAME, phypGetLparProfile)
(phypGetVIOSFreeSCSIAdapter, phypVolumeGetKey)
(phypGetStoragePoolDevice)
(phypVolumeGetPhysicalVolumeByStoragePool)
(phypVolumeGetPath): Likewise.
* src/vbox/vbox_tmpl.c (vboxNetworkUndefineDestroy)
(vboxNetworkCreate, vboxNetworkDumpXML)
(vboxNetworkDefineCreateXML): Likewise.
* src/xenapi/xenapi_driver.c (getCapsObject)
(xenapiDomainDumpXML): Likewise.
* src/xenapi/xenapi_utils.c (createVMRecordFromXml): Likewise.
* src/security/security_selinux.c (SELinuxGenNewContext):
Likewise.
* src/qemu/qemu_command.c (qemuBuildCommandLine): Likewise.
* src/qemu/qemu_hotplug.c (qemuDomainChangeEjectableMedia):
Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetPtyPaths):
Likewise.
* src/qemu/qemu_driver.c (qemudDomainShutdown)
(qemudDomainBlockStats, qemudDomainMemoryPeek): Likewise.
* src/storage/storage_backend_iscsi.c
(virStorageBackendCreateIfaceIQN): Likewise.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
2011-04-04 11:26:29 -06:00
Eric Blake
6c9e89bbd2 maint: avoid locale-sensitivity in string case comparisons
strcase{cmp/str} have the drawback of being sensitive to the global
locale; this is unacceptable in a library setting.  Prefer a
hard-coded C locale alternative for all but virsh, which is user
facing and where the global locale isn't changing externally.

* .gnulib: Update to latest, for c-strcasestr change.
* bootstrap.conf (gnulib_modules): Drop strcasestr, add c-strcase
and c-strcasestr.
* cfg.mk (sc_avoid_strcase): New rule.
(exclude_file_name_regexp--sc_avoid_strcase): New exception.
* src/internal.h (STRCASEEQ, STRCASENEQ, STRCASEEQLEN)
(STRCASENEQLEN): Adjust offenders.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextEjectMedia):
Likewise.
* tools/virsh.c (namesorter): Document exception.
2011-03-30 20:26:27 -06:00
Jiri Denemark
e586f57487 qemu: Fix media eject with qemu-0.12.*
In qemu-0.12.* "device '...' is locked" message was changed to "Device
..." so libvirt was no longer detecting this as an error.
2011-03-30 20:43:55 +02:00
Eric Blake
285e8a1769 qemu: improve error message on failed fd transfer
First fallout of fd: migration - it looks like SELinux enforcing
_does_ require fd labeling (running uninstalled libvirtd from an
unconstrained shell had no problems, but once faked out by doing
 chcon `stat -c %C /usr/sbin/libvirtd` daemon/libvirtd
 run_init $PWD/daemon/libvirtd
to run it with the same context as an init script service, and with
SELinux enforcing, I got a rather confusing failure:
error: Failed to save domain fedora_12 to fed12.img
error: internal error unable to send TAP file handle: No file descriptor supplied via SCM_RIGHTS

This fixes the error message, then I need to figure out a subsequent
patch that does the fsetfilecon() necessary to keep things happy.
It also appears that libvirtd hangs on a failed fd transfer; I don't
know if that needs an independent fix.

* src/qemu/qemu_monitor_text.c (qemuMonitorTextSendFileHandle):
Improve message, since TAP is no longer only client.
2011-03-29 07:12:29 -06:00
Wen Congyang
c4dae2d9a8 fix the check of the output of monitor command 'device_add'
Hotpluging host usb device by text mode will fail, because the monitor
command 'device_add' outputs 'husb: using...' if it succeeds, but we
think the command should not output anything.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2011-03-25 12:38:34 +08:00
Jiri Denemark
c3ad755f58 qemu: Fix copy&paste error messages in text monitor 2011-03-18 10:49:11 +01:00
Eric Blake
1c5dc4c607 qemu: consolidate duplicated monitor migration code
* src/qemu/qemu_monitor_text.h (qemuMonitorTextMigrate): Declare
in place of individual monitor commands.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONMigrate): Likewise.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextMigrateToHost)
(qemuMonitorTextMigrateToCommand, qemuMonitorTextMigrateToFile)
(qemuMonitorTextMigrateToUnix): Delete.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMigrateToHost)
(qemuMonitorJSONMigrateToCommand, qemuMonitorJSONMigrateToFile)
(qemuMonitorJSONMigrateToUnix): Delete.
* src/qemu/qemu_monitor.c (qemuMonitorMigrateToHost)
(qemuMonitorMigrateToCommand, qemuMonitorMigrateToFile)
(qemuMonitorMigrateToUnix): Consolidate shared code.
2011-03-14 21:57:43 -06:00
Jiri Denemark
81711cee34 qemu: Escape snapshot name passed to {save,load,del}vm 2011-03-10 14:36:05 +01:00
Jiri Denemark
b3c6ec03b8 qemu: Rename qemuMonitorCommandWithHandler as qemuMonitorText*
To make it more obvious that it is only used for text monitor. The
naming also matches the style of qemuMonitorTextCommandWithFd.
2011-03-10 14:36:05 +01:00
Jiri Denemark
39b4f4aab2 qemu: Rename qemuMonitorCommand{,WithFd} as qemuMonitorHMP*
So that it's obvious that they are supposed to be used with HMP commands.
2011-03-10 14:36:04 +01:00
Jiri Denemark
266265a560 qemu: Setup infrastructure for HMP passthrough
JSON monitor command implementation can now just directly call text
monitor implementation and it will be automatically encapsulated into
QMP's human-monitor-command.
2011-03-10 14:36:04 +01:00
Eric Blake
994e7567b6 maint: kill all remaining uses of old DEBUG macro
Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'

followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.

* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.
2011-02-21 08:46:52 -07:00
Wen Congyang
34c13d0d1a check more error info about whether drive_add failed
When we attach a disk, but we specify a wrong format of disk image,
qemu monitor command drive_add will fail, but libvirt does not detect
this error.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2011-02-17 14:10:26 -07:00
Matthias Bolte
d9ad8ac392 Add VIR_DIV_UP to divide memory or storage request sizes with round up
Use it in all places where a memory or storage request size is converted
to a larger granularity. This avoids requesting too small memory or storage
sizes that could result from the truncation done by a simple division.

This extends the round up fix in 6002e0406c
to the whole codebase.

Instead of reporting errors for odd values in the VMX code round them up.

Update the QEMU Argv tests accordingly as the original memory size 219200
isn't a even multiple of 1024 and is rounded up to 215 megabyte now. Change
it to 219100 and 219136. Use two different values intentionally to make
sure that rounding up works.

Update virsh.pod accordingly, as rounding down and rejecting are replaced
by rounding up.
2011-01-29 00:42:10 +01:00
Daniel P. Berrange
87a183f698 Fix startup with VNC password expiry on old QEMU
The code which set VNC passwords correctly had fallback for
the set_password command, but was lacking it for the
expire_password command. This made it impossible to start
a guest. It also failed to check whether QEMU was still
running after the initial 'set_password' command completed

* src/qemu/qemu_hotplug.c: Fix error handling when
  password expiry fails
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Fix
  return code for missing expire_password command
2011-01-21 16:24:13 +00:00
Marc-André Lureau
4d099bc06c qemu: add set_password and expire_password monitor commands 2011-01-14 12:35:42 -07:00
Daniel P. Berrange
0f2e4b9c68 Move QEMU command line management into a separate file
The qemu_conf.c code is doing three jobs, driver config file
loading, QEMU capabilities management and QEMU command line
management. Move the command line code into its own file

* src/qemu/qemu_command.c, src/qemu/qemu_command.h: New
  command line management code
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Delete command
  line code
* src/qemu/qemu_conf.h, src/qemu_conf.c: Adapt for API renames
* src/Makefile.am: add src/qemu/qemu_command.c
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Add
  import of qemu_command.h
2010-12-17 13:43:20 +00:00
Ryan Harper
aefaeb3d48 qemu: call drive_del in DetachPciDiskDevice
Currently libvirt doesn't confirm whether the guest has responded to the
disk removal request.  In some cases this can leave the guest with
continued access to the device while the mgmt layer believes that it has
been removed.  With a recent qemu monitor command[1] we can
deterministically revoke a guests access to the disk (on the QEMU side)
to ensure no futher access is permitted.

This patch adds support for the drive_del() command and introduces it
in the disk removal paths.  If the guest is running in a QEMU without this
command we currently explicitly check for unknown command/CommandNotFound
and log the issue.

If QEMU supports the command we issue the drive_del command after we attempt
to remove the device.  The guest may respond and remove the block device
before we get to attempt to call drive_del.  In that case, we explicitly check
for 'Device not found' from the monitor indicating that the target drive
was auto-deleted upon guest responds to the device removal notification.

1. http://thread.gmane.org/gmane.comp.emulators.qemu/84745

Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
2010-12-08 14:43:45 -07:00
Ryan Harper
0cdc982995 qemu: call drive_unplug in DetachPciDiskDevice
Currently libvirt doesn't confirm whether the guest has responded to the
disk removal request.  In some cases this can leave the guest with
continued access to the device while the mgmt layer believes that it has
been removed.  With a recent qemu monitor command[1] we can
deterministically revoke a guests access to the disk (on the QEMU side)
to ensure no futher access is permitted.

This patch adds support for the drive_unplug() command and introduces it
in the disk removal paths.  There is some discussion to be had about how
to handle the case where the guest is running in a QEMU without this
command (and the fact that we currently don't have a way of detecting
what monitor commands are available).

Changes since v2:
 - use VIR_ERROR to report when unplug command not found
Changes since v1:
 - return > 0 when command isn't present, < 0 on command failure
 - detect when drive_unplug command isn't present and log error
   instead of failing entire command

Signed-off-by: Ryan Harper <ryanh@us.ibm.com>
2010-12-08 11:03:02 -07:00
Osier Yang
5483745534 qemu: fix typos in qemu_monitor_text.c
* src/qemu/qemu_monitor_text.c (qemuMonitorTextChangeMedia)
2010-11-16 09:26:54 -07:00
Cole Robinson
96d52fcf43 qemu: Add flag to force a CDROM eject
QEMU allows forcing a CDROM eject even if the guest has locked the device.
Expose this via a new UpdateDevice flag, VIR_DOMAIN_DEVICE_MODIFY_FORCE.

This has been requested for RHEV:

https://bugzilla.redhat.com/show_bug.cgi?id=626305

v2: Change flag name, bool cleanups
2010-11-10 12:31:20 -05:00
Daniel P. Berrange
a1de6ba0f1 Misc error handling fixes in text mode monitor commands
A couple of places in the text monitor were overwriting the
'ret' variable with a >= 0 value before success was actually
determined. So later error paths would not correctly return
the -1 value. The drive_add code was not checking for errors
like missing command

* src/qemu/qemu_monitor_text.c: Misc error handling fixes
2010-11-02 14:38:23 +00:00
Eric Blake
f22e670b4a qemu: work around dash 0.5.5 bug in managed save
Older dash mistakenly truncates regular files when using <> redirection;
this kills our use of double dd to reduce storage overhead when
saving qemu images.  But qemu insists on running a command through
/bin/sh, so we work around it by having qemu run $sh -c 'real command'
when we have a replacement $sh in mind.

* configure.ac (VIR_WRAPPER_SHELL): Define to a replacement shell,
if /bin/sh is broken on <> redirection.
* src/qemu/qemu_monitor.h (VIR_WRAPPER_SHELL_PREFIX)
(VIR_WRAPPER_SHELL_SUFFIX): New macros.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextMigrateToFile): Use
them.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMigrateToFile):
Likewise.
2010-10-26 09:31:42 -06:00
Chris Lalancette
057e855324 Qemu arbitrary monitor commands.
Implement the qemu driver's virDomainQemuMonitorCommand
and hook it into the API entry point.

Changes since v1:
 - Rename the (external) qemuMonitorCommand to qemuDomainMonitorCommand
 - Add virCheckFlags to qemuDomainMonitorCommand

Changes since v2:
 - Drop ATTRIBUTE_UNUSED from the flags

Changes since v3:
 - Add a flag to priv so we only print out monitor command warning once.  Note
   that this has not been plumbed into qemuDomainObjPrivateXMLFormat or
   qemuDomainObjPrivateXMLParse, which means that if you run a monitor command,
   restart libvirtd, and then run another monitor command, you may get an
   an erroneous VIR_INFO.  It's a pretty minor matter, and I didn't think it
   warranted the additional code.
 - Add BeginJob/EndJob calls around EnterMonitor/ExitMonitor

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-07-23 17:30:24 -04:00
Daniel P. Berrange
28e96d720b Fix migration in text mode and shared storage migration in json mode
The patches for shared storage migration were not correctly written
for json mode. Thus the 'blk' and 'inc' parameters were never being
set. In addition they didn't set the QEMU_MONITOR_MIGRATE_BACKGROUND
so migration was synchronous. Due to multiple bugs in QEMU's JSON
impl this wasn't noticed because it treated the sync migration requst
as asynchronous anyway. Finally 'background' parameter was converted
to take arbitrary flags but not renamed, and not all uses were changed
to unsigned int.

* src/qemu/qemu_driver.c: Set QEMU_MONITOR_MIGRATE_BACKGROUND in
  doNativeMigrate
* src/qemu/qemu_monitor_json.c: Process QEMU_MONITOR_MIGRATE_NON_SHARED_DISK
  and QEMU_MONITOR_MIGRATE_NON_SHARED_INC flags
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.h, src/qemu/qemu_monitor_text.c,
  src/qemu/qemu_monitor_text.h: change 'int background' to
  'unsigned int flags' in migration APIs. Add logging of flags
  parameter
2010-06-25 14:40:06 +01:00
Eric Blake
322b1fd44b qemu: reduce file padding requirements
Followup to https://bugzilla.redhat.com/show_bug.cgi?id=599091,
commit 20206a4b, to reduce disk waste in padding.

* src/qemu/qemu_monitor.h (QEMU_MONITOR_MIGRATE_TO_FILE_BS): Drop
back to 4k.
(QEMU_MONITOR_MIGRATE_TO_FILE_TRANSFER_SIZE): New macro.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Update comment.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextMigrateToFile): Use
two invocations of dd to output non-aligned large blocks.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMigrateToFile):
Likewise.
2010-06-17 13:29:16 -06:00
Daniel P. Berrange
c833efd35b Fix check for errors in device_add command in QEMU text monitor
Any output at all from device_add indicates an error in the
command execution. Thus it needs to check for reply != ""

* src/qemu/qemu_monitor_text.c: Fix reply check for errors
  to treat any output as an error
2010-06-08 15:20:59 +01:00
Chris Lalancette
93500040f9 Fix up basic migration.
Basic live migration was broken by the commit that added
non-shared block support in two ways:

1)  It added a virCheckFlags() to doNativeMigrate().  Besides
the fact that typical usage of virCheckFlags() is in driver
entry points, and doNativeMigrate() is not an entry point,
it was missing important flags like VIR_MIGRATE_LIVE.  Move
the virCheckFlags to the top-level qemuDomainMigratePrepare2
and friends.

2)  It also added a memory leak in qemuMonitorTextMigrate()
by not freeing the memory used by virBufferContentAndReset().
This is fixed by storing the pointer in a temporary variable
and freeing it at the end.

With this patch in place, normal live migration works again.

v3: Instead of the churn for virCheckFlagsUI and UL, instead
always promote flags to an unsigned long and always use %lx
for the fprintf.
v2: Add back flags check, which required adding virCheckFlagsUI
and virCheckFlagsUL

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-05-25 10:48:10 -04:00
Daniel P. Berrange
ebb0c19c48 Query block allocation extent from QEMU monitor
The virDomainGetBlockInfo API allows query physical block
extent and allocated block extent. These are normally the
same value unless storing a special format like qcow2
inside a block device. In this scenario we can query QEMU
to get the actual allocated extent.

Since last time:

 - Return fatal error in text monitor
 - Only invoke monitor command for block devices
 - Fix error handling JSON code

* src/qemu/qemu_driver.c: Fill in block aloction extent when VM
  is running
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  API to query the highest block extent via info blockstats
2010-05-24 15:55:51 -06:00
Jim Meyering
c5a2fe243b maint: don't mark VIR_WARN or VIR_WARN0 diagnostics for translation
Approximately 60 messages were marked.  Since these diagnostics are
intended solely for developers and maintainers, encouraging translation
is deemed to be counterproductive:
http://thread.gmane.org/gmane.comp.emulators.libvirt/25050/focus=25052

Run this command:
  git grep -l VIR_WARN|xargs perl -pi -e \
    's/(VIR_WARN0?)\s*\(_\((".*?")\)/$1($2/'
2010-05-19 12:00:18 +02:00
Jim Meyering
cff218f353 qemuMonitorTextMigrate: avoid leak on OOM-error path
* src/qemu/qemu_monitor_text.c (qemuMonitorTextMigrate): Also
free "safedest" buffer when failing.
2010-05-18 19:23:32 +02:00
Daniel P. Berrange
ff45b4c26f Add support for NIC hotplug using netdev_add in QEMU
QEMU is gaining a new monitor command netdev_add for hotplugging
NICs using the netdev backend code. We already support this on
the command this, though it is disabled. This adds support for
hotplug too, also to remain disabled until 0.13 QEMU is released

* src/qemu/qemu_driver.c: Support netdev hotplug for NICs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  support for netdev_add and netdev_remove commands
2010-05-14 09:16:36 -04:00
Kenneth Nagin
b0a3f8b6c5 qemu: live migration with non-shared storage for kvm
Support for live migration between hosts that do not share storage was
added to qemu-kvm release 0.12.1.
It supports two flags:
-b migration without shared storage with full disk copy
-i migration without shared storage with incremental copy (same base image
shared between source and destination).

I tested the live migration without shared storage (both flags) for native
and p2p with and without tunnelling.  I also verified that the fix doesn't
affect normal migration with shared storage.
2010-05-04 16:03:36 -06:00
Daniel P. Berrange
93e0b3c8d6 Fix QEMU save/restore with block devices
The save process was relying on use of the shell >> append
operator to ensure the save data was placed after the libvirt
header + XML. This doesn't work for block devices though.
Replace this code with use of 'dd' and its 'seek' parameter.
This means that we need to pad the header + XML out to a
multiple of dd block size (in this case we choose 512).

The qemuMonitorMigateToCommand() monitor API is used for both
save/coredump, and migration via UNIX socket. We can't simply
switch this to use 'dd' since this causes problems with the
migration usage. Thus, create a dedicated qemuMonitorMigateToFile
which can accept an filename + offset, and remove the filename
from the current qemuMonitorMigateToCommand() API

* src/qemu/qemu_driver.c: Switch to qemuMonitorMigateToFile
  for save and core dump
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Create
  a new qemuMonitorMigateToFile, separate from the existing
  qemuMonitorMigateToCommand to allow handling file offsets
2010-04-28 13:51:48 +01:00
Daniel P. Berrange
9772bebab7 Fix QEMU text monitor command error checking
The text monitor code was checking for a '\n' prefix on several
places. Previously this would work, but since the monitor code
re-write the '\n' is already stripped off, so mustn't be checked
for.

* src/qemu/qemu_monitor_text.c: Fix monitor error checking
2010-04-22 17:15:48 +01:00
Daniel P. Berrange
a980d123b5 Fix CPU hotplug command names
Probably as a result of a merge error, the CPU hotplug command
names were completely wrong.

* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Fix
  the CPU hotplug command names
2010-04-22 17:15:48 +01:00
Daniel P. Berrange
9417eb0337 Fix error reporting for getfd + host_net_add in QEMU
If either of the getfd or host_net_add monitor commands return
any text, this indicates an error condition. Don't ignore this!

* src/qemu/qemu_monitor_text.c: Report errors for getfd and
  host_net_add
2010-04-19 12:11:24 +01:00
Daniel P. Berrange
fde060b8f5 Rename parameter in qemuMonitorDeviceDel
The parameter for the qemuMonitorDeviceDel() is a device alias,
not a device config string. Rename the parameter reflect this
and avoid confusion to readers.

* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Rename devicestr to devalias in qemuMonitorDeviceDel()
2010-04-15 17:57:59 +01:00
Ryan Harper
4a2dd00e76 qemu: catch cdrom change error
Currently when we attempt to change the cdrom in a qemu VM the monitor
doesn't generate an error if the target filename doesn't exist.  I've
submitted a patch[1] for this.  This patch is the libvirt qemu-driver
side which catches the error message from the monitor and reportes the
error to libvirt.  This means that virsh attach-disk cdrom commands
won't appear to succeed when qemu change command actually failed.

* src/qemu/qemu_monitor_text.c: in qemuMonitorTextChangeMedia() look
  for failure to access the new data
2010-04-09 15:07:16 +02:00
Chris Lalancette
462c74c38a Snapshot QEMU driver.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-04-05 10:24:51 -04:00
Eric Blake
9d6614df86 maint: remove redundant tests after virStrToLong
virStrToLong* guarantees (via strtol) that the end pointer will be set
to the point at which parsing stopped (even on failure, this point is
the start of the input string).

* src/esx/esx_driver.c (esxGetVersion): Remove pointless
conditional.
* src/qemu/qemu_conf.c (qemuParseCommandLinePCI)
(qemuParseCommandLineUSB, qemuParseCommandLineSmp): Likewise.
* src/qemu/qemu_monitor_text.c
(qemuMonitorTextGetMigrationStatus): Likewise.
2010-03-31 08:58:46 -06:00
Jiri Denemark
7f4f1dd416 Implement virDomainMigrateSetMaxDowntime in qemu driver 2010-03-19 22:47:45 +01:00
Jiri Denemark
e6458393ab Fix error messages in qemu text monitor
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2010-03-15 15:10:27 +01:00
Jim Meyering
4697def66b qemuMonitorTextGetMemoryStats: decrease risk of false positive in parsing
The code erroneously searched the entire "reply" for a comma, when
its intent was to search only that portion after "balloon: actual="
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetMemoryStats):
Search for "," only starting *after* the BALLOON_PREFIX string.
Otherwise, we'd be more prone to false positives.
2010-03-05 18:28:56 +01:00
Daniel P. Berrange
e8d6c28955 Support VCPU hotplug in QEMU guests
QEMU has a monitor command 'set_cpu' which allows a specific
CPU to be toggled between online& offline state. libvirt CPU
hotplug does not work in terms of individual indexes CPUs.
Thus to support this, we iteratively toggle the online state
when the total number of vCPUs is adjusted via libvirt

NB, currently untested since QEMU segvs when running this!

* src/qemu/qemu_driver.c: Toggle online state for CPUs when
  doing hotplug
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  monitor API for toggling a CPU's online status via 'set_cpu
2010-03-04 13:19:29 +00:00
Daniel P. Berrange
44f687297a Fix detection of errors in QEMU device_add command
The code assumed that 'device_add' returned an empty string upon
success. This is not true, it sometimes prints random debug info.
THus we need to check for an explicit fail string

* src/qemu/qemu_monitor_text.c: Fix error checking of the device_add
  monitor command
2010-03-03 14:56:15 +00:00
Daniel P. Berrange
0d3eee7fe8 Add QEMU driver support for job info on migration ops
Introduce support for  virDomainGetJobInfo in the QEMU driver. This
allows for monitoring of any API that uses the 'info migrate' monitor
command. ie virDomainMigrate, virDomainSave and virDomainCoreDump

Unfortunately QEMU does not provide a way to monitor incoming migration
so we can't wire up virDomainRestore yet.

The virsh tool gets a new command 'domjobinfo' to query status

* src/qemu/qemu_driver.c: Record virDomainJobInfo and start time
  in qemuDomainObjPrivatePtr objects. Add generic shared handler
  for calling 'info migrate' with all migration based APIs.
* src/qemu/qemu_monitor_text.c: Fix parsing of 'info migration' reply
* tools/virsh.c: add new 'domjobinfo' command to query progress
2010-03-02 16:23:24 +00:00
Wolfgang Mauerer
8540dadbe9 Use device_del to remove SCSI controllers
when the underlying qemu supports the drive/device model and the
controller has been added this way.
* src/qemu/qemu_driver.c: use qemuMonitorDelDevice() when detaching
  PCI controller and if supported
* src/qemu/qemu_monitor.[ch]: add new qemuMonitorDelDevice() function
* src/qemu/qemu_monitor_json.[ch]: JSON backend for DelDevice command
* src/qemu/qemu_monitor_text.[ch]: Text backend for DelDevice command
2010-03-02 09:40:51 +01:00
Eric Blake
bef10f9a05 qemu: avoid null dereference on failed migration
* src/qemu/qemu_monitor_text.c: qemuMonitorTextGetMigrationStatus: Check for
  failed strchr, to silence a coverity warning.
2010-03-01 15:34:33 +01:00
Jim Meyering
7ac2787019 qemuMonitorTextAddUSBDisk: avoid unconditional leak
* src/qemu/qemu_monitor_text.c (qemuMonitorTextAddUSBDisk): Free
command output buffer.
2010-02-16 18:09:13 +01:00
Jim Meyering
bc6a48c6cf qemuMonitorTextAddDevice: avoid unconditional leak
* src/qemu/qemu_monitor_text.c (qemuMonitorTextAddDevice): Free the
device name buffer.
2010-02-16 17:49:05 +01:00
Daniel P. Berrange
c31a116b72 Support 'block_passwd' command for QEMU disk encryption
The old text mode monitor prompts for a password when disks are
encrypted. This interactive approach doesn't work for JSON mode
monitor. Thus there is a new 'block_passwd' command that can be
used.

* src/qemu/qemu_driver.c: Split out code for looking up a disk
  secret from findVolumeQcowPassphrase, into a new method
  getVolumeQcowPassphrase. Enhance qemuInitPasswords() to also
  set the disk encryption password via the monitor
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  support for the 'block_passwd' monitor command.
2010-02-12 17:25:02 +00:00
Daniel P. Berrange
7357975000 Fix disk stats retrieval with QEMU >= 0.12
With QEMU >= 0.12 the host and guest side of disks no longer have
the same naming convention. Specifically the host side will now
get a 'drive-' prefix added to its name. The 'info blockstats'
monitor command returns the host side name, so it is neccessary
to strip this off when looking up stats since libvirt stores the
guest side name !

* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Move 'drive-' prefix
  string to a defined constant
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_text.c: Strip
  off 'drive-' prefix (if found) when looking up disk stats
2010-02-11 12:07:23 +00:00
Daniel P. Berrange
caa805ea64 Remove passing of virConnectPtr throughout QEMU driver 2010-02-10 11:49:23 +00:00
Matthias Bolte
a5ab900d26 Remove conn parameter from virReportSystemError 2010-02-09 01:04:54 +01:00
Matthias Bolte
8ce5e2c1ab Remove conn parameter from virReportOOMError 2010-02-09 01:04:54 +01:00
Daniel P. Berrange
db0b9e7d52 Disable QEMU monitor IO debugging by default 2010-02-02 16:31:47 +00:00
Daniel P. Berrange
5ec6cf7fb8 Introduce internal QEMU monitor APIs for drive + device hotadd
The way QEMU is started has been changed to use '-device' and
the new style '-drive' syntax. This needs to be mirrored in
the hotplug code, requiring addition of two new APIs.

* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c: Define APIs
  qemuMonitorAddDevice() and qemuMonitorAddDrive()
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Implement the new monitor APIs
2010-02-02 16:31:42 +00:00
Jim Meyering
4cd188d4d5 avoid format-related warnings
* src/qemu/qemu_monitor_text.c (qemuMonitorTextGetAllPCIAddresses):
Use %s.
* src/storage/storage_backend_iscsi.c (virStorageBackendCreateIfaceIQN):
Likewise.
* tools/virsh.c (cmdSecretSetValue): Likewise.
2010-02-01 18:25:23 +01:00
Jim Meyering
1af75828a0 qemuMonitorTextAttachDrive: avoid two leaks
* src/qemu/qemu_monitor_text.c (qemuMonitorTextAttachDrive): Most other
failures in this function would "goto cleanup", but one mistakenly
returned directly, skipping the cleanup and resulting in a leak.
In addition, iterating the "try_command" loop would clobber, and
thus leak, the "cmd" allocated on the first iteration,
so be careful to free it in addition to "reply" beforehand.
2010-01-25 22:06:47 +01:00
Jim Meyering
9827e0a42c qemuMonitorTextGetMemoryStats: plug a leak on an error path
* src/qemu/qemu_monitor_text.c (qemuMonitorCommandWithHandler):
Always free *reply, upon failure.
2010-01-25 17:04:27 +01:00
Adam Litke
80b4d20dfe domMemoryStats / qemu: Fix parsing of unknown stats
Fix a small problem with the qemu memory stats parsing algorithm.  If qemu
reports a stat that libvirt does not recognize, skip past it so parsing can
continue.  This corrects a potential infinite loop in the parsing code that can
only be triggered if new statistics are added to qemu.

* src/qemu/qemu_monitor_text.c: qemuMonitorParseExtraBalloonInfo add a
  skip for extra ','
2010-01-21 16:28:50 +01:00
Jiri Denemark
4bc3bd7b18 Remove superfluous new lines from messages
I noticed some debug messages are printed with an empty lines after
them. This patch removes these empty lines from all invocations of the
following macros:
    VIR_DEBUG
    VIR_DEBUG0
    VIR_ERROR
    VIR_ERROR0
    VIR_INFO
    VIR_WARN
    VIR_WARN0

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2010-01-19 17:30:41 +01:00
Daniel P. Berrange
2224989c39 Avoid free'ing a constant string in chardev lookup code
* src/qemu/qemu_monitor_text.c: Don't free const string in
   qemuMonitorTextGetPtyPaths()
2010-01-18 13:33:50 +00:00
Daniel P. Berrange
989051a85e Detect PCI addresses at QEMU startup
Hotunplug of devices requires that we know their PCI address. Even
hotplug of SCSI drives, required that we know the PCI address of
the SCSI controller to attach the drive to. We can find this out
by running 'info pci' and then correlating the vendor/product IDs
with the devices we booted with.

Although this approach is somewhat fragile, it is the only viable
option with QEMU < 0.12, since there is no way for libvirto set
explicit PCI addresses when creating devices in the first place.
For QEMU > 0.12, this code will not be used.

* src/qemu/qemu_driver.c: Assign all dynamic PCI addresses on
  startup of QEMU VM, matching vendor/product IDs
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  API for fetching PCI device address mapping
2010-01-18 12:44:50 +00:00
Daniel P. Berrange
3a6bf1bb78 Properly support SCSI drive hotplug
The current SCSI hotplug support attaches a brand new SCSI controller
for every disk. This is broken because the semantics differ from those
used when starting the VM initially. In the latter case, each SCSI
controller is filled before a new one is added.

If the user specifies an high drive index (sdazz) then at initial
startup, many intermediate SCSI controllers may be added with no
drives.

This patch changes SCSI hotplug so that it exactly matches the
behaviour of initial startup. First the SCSI controller number is
determined for the drive to be hotplugged. If any controller upto
and including that controller number is not yet present, it is
attached. Then finally the drive is attached to the last controller.

NB, this breaks SCSI hotunplug, because there is no 'drive_del'
command in current QEMU. Previous SCSI hotunplug was broken in
any case because it was unplugging the entire controller, not
just the drive in question.

A future QEMU will allow proper SCSI hotunplug of a drive.

This patch is derived from work done by Wolfgang Mauerer on disk
controllers.

* src/qemu/qemu_driver.c: Fix SCSI hotplug to add a drive to
 the correct controller, instead of just attaching a new
  controller.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  support for 'drive_add' command
2010-01-18 12:44:50 +00:00
Wolfgang Mauerer
da9d937b94 Implement SCSI controller hotplug/unplug for QEMU
This patch allows for explicit hotplug/unplug of SCSI controllers.
Ordinarily this is not required, since QEMU/libvirt will attach
a new SCSI controller whenever one is required. Allowing explicit
hotplug of controllers though, enables the caller to specify a
static PCI address, instead of auto-assigning the next available
PCI slot. Or it will when we have static PCI addressing.

This patch is derived from Wolfgang Mauerer's disk controller
patch series.

* src/qemu/qemu_driver.c: Support hotplug & unplug of SCSI
  controllers
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
  src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
  new API for attaching PCI SCSI controllers
2010-01-18 12:44:50 +00:00
Daniel P. Berrange
ab0da52b43 Convert monitor over to use virDomainDeviceAddress
Convert the QEMU monitor APIs over to use virDomainDeviceAddress
structs for passing addresses in/out, instead of individual bits.
This makes the number of parameters smaller & easier to deal with.
No functional change

* src/qemu/qemu_driver.c, src/qemu/qemu_monitor.c,
  src/qemu/qemu_monitor.h, src/qemu/qemu_monitor_text.c,
  src/qemu/qemu_monitor_text.h: Change monitor hotplug APIs to
  take an explicit address ptr for all host/guest addresses
2010-01-15 17:55:58 +00:00
Matthew Booth
c0a9b6a533 Fix parsing of 'info chardev' line endings
This change makes the 'info chardev' parser ignore any trailing
whitespace on a line. This fixes a specific problem handling a '\r\n'
line ending.

* src/qemu/qemu_monitor_text.c: Ignore trailing whitespace in
  'info chardev' output.
2010-01-06 17:09:04 +01:00
Adam Litke
c7523b410a Implements domainMemStats in the qemu driver
Support for memory statistics reporting is accepted for qemu inclusion.
Statistics are reported via the monitor command 'info balloon' as a comma
seprated list:

(qemu) info balloon
balloon: actual=1024,mem_swapped_in=0,mem_swapped_out=0,major_page_faults=88,minor_page_faults=105535,free_mem=1017065472,total_mem=1045229568

Libvirt, qemu, and the guest operating system may support a subset of the
statistics defined by the virtio spec.  Thus, only statistics recognized by
components will be reported.

* src/qemu/qemu_driver.c src/qemu/qemu_monitor_text.[ch]: implement the
  new entry point by using info balloon monitor command
2009-12-20 13:36:28 +01:00
Daniel Veillard
a7d1eb3c44 Fix a couple of problems in last patch
Those were pointed by DanB in his review but not yet fixed

* src/qemu/qemu_driver.c: qemudWaitForMonitor() use EnterMonitorWithDriver()
  and ExitMonitorWithDriver() there
* src/qemu/qemu_monitor_text.c: checking fro strdu failure and hash
  table add error in qemuMonitorTextGetPtyPaths()
2009-12-14 11:05:55 +01:00
Matthew Booth
60e8977fdd Get QEMU pty paths from the monitor
This change makes the QEMU driver get pty paths from the output of the
monitor 'info chardev' command. This output is structured, and contains
both the name of the device and the path on the same line. This is
considerably more reliable than parsing the startup log output, which
requires the parsing code to know which order QEMU will print pty
information in.

Note that we still need to parse the log output as the monitor itself
may be on a pty. This should be rare, however, and the new code will
replace all pty paths parsed by the log output method once the monitor
is available.

* src/qemu/qemu_monitor.(c|h) src/qemu_monitor_text.(c|h): Implement
  qemuMonitorGetPtyPaths().
* src/qemu/qemu_driver.c: Get pty path information using
  qemuMonitorGetPtyPaths().
2009-12-14 10:50:01 +01:00
Daniel P. Berrange
cce1998a64 Make QEMU text monitor parsing more robust
The QEMU 0.10.0 release (and possibly other 0.10.x) has a bug where
it sometimes/often forgets to display the initial monitor greeting
line, soley printing a (qemu).  This in turn confuses the text
console parsing because it has a '(qemu)' it is not expecting. The
confusion results in a negative malloc. Bad things follow.

This re-writes the text console handling to be more robust. The key
idea is that it should only look for a (qemu), once it has seen the
original command echo'd back. This ensures it'll skip the bogus stray
(qemu) with broken QEMUs.

* src/qemu/qemu_monitor.c: Add some (disabled) debug code
* src/qemu/qemu_monitor_text.c: Re-write way command replies
  are detected
2009-12-09 10:32:50 +00:00
Daniel P. Berrange
8c12b20c61 Add a 'format' arg to qemuMonitorChangeMedia() since JSON will support it
The current QEMU disk media change does not support setting the
disk format. The new JSON monitor will support this, so add an
extra parameter to pass this info in

* src/qemu/qemu_driver.c: Pass in disk format when changing media
* src/qemu/qemu_monitor.h, src/qemu/qemu_monitor.c,
  src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Add a 'format' arg to qemuMonitorChangeMedia()
2009-12-08 13:46:53 +00:00
Daniel P. Berrange
3fa3cff73c Fix migration cancellation for QEMU
* src/qemu/qemu_monitor_text.c: Add missing underscore in the
  migrate_cancel monitor command impl
2009-12-08 13:46:53 +00:00
Daniel P. Berrange
fa1e4759db Move qemuMonitorEscape + migrate status enum into shared monitor code
The qemuMonitorEscape() method, and the VIR_ENUM for migration
status will be needed by the JSON monitor too, so move that code
into the shared qemu_monitor.c file instead of qemu_monitor_text.c

* src/qemu/qemu_monitor.h: Declare qemuMonitorMigrationStatus enum
  and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor.c: Implement qemuMonitorMigrationStatus enum
  and qemuMonitorEscapeArg and qemuMonitorEscapeShell methods
* src/qemu/qemu_monitor_text.c: Remove above methods/enum
2009-12-08 13:46:53 +00:00
Matthew Booth
046039124d Fix typo in error message 2009-11-17 12:18:39 +01:00
Ryota Ozaki
75825e453a Fix warning on make due to missing cast (int)
* src/qemu/qemu_monitor.c src/qemu/qemu_monitor_text.c: cast size_t to
  int when passing to '%d'
2009-11-11 11:30:01 +01:00
Daniel P. Berrange
1dc10a7b28 Fully asynchronous monitor I/O processing
Change the QEMU monitor file handle watch to poll for both
read & write events, as well as EOF. All I/O to/from the
QEMU monitor FD is now done in the event callback thread.

When the QEMU driver needs to send a command, it puts the
data to be sent into a qemuMonitorMessagePtr object instance,
queues it for dispatch, and then goes to sleep on a condition
variable. The event thread sends all the data, and then waits
for the reply to arrive, putting the response / error data
back into the qemuMonitorMessagePtr and notifying the condition
variable.

There is a temporary hack in the disk passphrase callback to
avoid acquiring the domain lock.  This avoids a deadlock in
the command processing, since the domain lock is still held
when running monitor commands. The next commit will remove
the locking when running commands & thus allow re-introduction
of locking the disk passphrase callback

* src/qemu/qemu_driver.c: Temporarily don't acquire lock in
  disk passphrase callback. To be reverted in next commit
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Remove
  raw I/O functions, and a generic qemuMonitorSend() for
  invoking a command
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Remove all low level I/O, and use the new qemuMonitorSend()
  API. Provide a qemuMonitorTextIOProcess() method for detecting
  command/reply/prompt boundaries in the monitor data stream
2009-11-10 13:27:18 +00:00
Daniel P. Berrange
41d8968d43 Wrap text mode monitor APIs, pass qemuMonitorPtr directly to APIs
Change the QEMU driver to not directly invoke the text mode monitor
APIs. Instead add a generic wrapper layer, which will eventually
invoke either the text or JSON protocol code as needed. Pass an
qemuMonitorPtr object into the monitor APIs instead of virDomainObjPtr
to complete the de-coupling of the monitor impl from virDomainObj
data structures

* src/qemu/qemu_conf.h: Remove qemuDomainObjPrivate definition
* src/qemu/qemu_driver.c: Add qemuDomainObjPrivate definition.
  Pass qemuMonitorPtr into all monitor APIs instead of the
  virDomainObjPtr instance.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add thin
  wrappers for all qemuMonitorXXX command APIs, calling into
  qemu_monitor_text.c/h
* src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h:
  Rename qemuMonitor -> qemuMonitorText & update to accept
  qemuMonitorPtr instead of virDomainObjPtr
2009-11-10 12:15:27 +00:00
Daniel P. Berrange
4604c18f0b Move encryption lookup back into qemu driver file
Decouple the monitor code from the virDomainDefPtr structure
by moving the disk encryption lookup code back into the
qemu_driver.c file. Instead provide a function callback to
the monitor code which can be invoked to retrieve encryption
data as required.

* src/qemu/qemu_driver.c: Add findDomainDiskEncryption,
  and findVolumeQcowPassphrase. Pass address of the method
  findVolumeQcowPassphrase into qemuMonitorOpen()
* src/qemu/qemu_monitor.c: Associate a disk
  encryption function callback with the qemuMonitorPtr
  object.
* src/qemu/qemu_monitor_text.c: Remove findDomainDiskEncryption
  and findVolumeQcowPassphrase.
2009-11-10 12:15:01 +00:00
Daniel P. Berrange
1cfd5a00eb Make use of private data structure for monitor state
Introduce a new qemuDomainObjPrivate object which is used to store
the private QEMU specific data associated with each virDomainObjPtr
instance. This contains a single member, an instance of the new
qemuMonitorPtr object which encapsulates the QEMU monitor state.
The internals of the latter are private to the qemu_monitor* files,
not to be shown to qemu_driver.c

* src/qemu/qemu_conf.h: Definition of qemuDomainObjPrivate.
* src/qemu/qemu_driver.c: Register a functions for creating
  and freeing qemuDomainObjPrivate instances with the domain
  capabilities. Remove the qemudDispatchVMEvent() watch since
  I/O watches are now handled by the monitor code itself. Pass
  a new qemuHandleMonitorEOF() callback into qemuMonitorOpen
  to allow notification when the monitor quits.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Introduce
  the 'qemuMonitor' object. Temporarily add new APIs
  qemuMonitorWrite, qemuMonitorRead, qemuMonitorWaitForInput
  to allow text based monitor impl to perform I/O.
* src/qemu/qemu_monitor_text.c: Call APIs for reading/writing
  to monitor instead of accessing the file handle directly.
2009-11-10 12:14:30 +00:00
Matthias Bolte
790f0b3057 Add missing OOM error checks, reports and cleanups 2009-11-09 23:17:45 +01:00
Paolo Bonzini
1a09553e52 unbreak migration
Fix migration, broken in two different ways by the QEMU monitor
abstraction.  Note that the QEMU console emits a "\r\n" as the
line-ending.

* src/qemu/qemu_monitor_text.c (qemuMonitorGetMigrationStatus):
Fix "info migrate" command and its output's parsing.
2009-10-02 11:57:31 +02:00
Chris Lalancette
7cc1491d10 Various monitor improvements for migration.
The upcoming tunnelled migration needs to be able to set
a migration in progress in the background, as well as
be able to cancel a migration when a problem has happened.
This patch allows for both of these to properly work.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2009-10-01 13:24:22 +02:00
Daniel P. Berrange
46da355022 Standardize debugging messages in QEMU monitor code
* src/qemu/qemu_monitor_text.c: Always print command and reply
  in qemuMonitorCommandWithHandler. Print all args in each monitor
  command API & remove redundant relpy printing
2009-09-29 12:20:56 +01:00
Daniel P. Berrange
79f45855a6 Remove low level monitor APIs from header file
* src/qemu/qemu_monitor_text.h: Remove qemudMonitorCommand,
  qemudMonitorCommandWithFd, qemudMonitorCommandWithHandler,
  qemudMonitorCommandExtra low level APIs
* src/qemu/qemu_monitor_text.c: Replace s/qemud/qemuMonitor/
2009-09-29 12:20:56 +01:00