These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
Expecting the user to specify these is cumbersome and the same XML
cannot be re-used across different revisions of SEV. Since
we have SEV platform information saved in QEMU capabilities, we can
make the attributes optional and should fill them in automatically
in the QEMU driver right before starting it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/57
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All but VIR_CPU_MODE_HOST_MODEL were moved. 'host_model' mode
has nuances that forbid the verification to be moved to parse
time.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
A few tweaks were made during the move:
- the error messages were changed to mention 'sata controller'
instead of 'ide controller';
- a check for address type 'drive' was added like it is done
with other bus types. The error message of qemuxml2argdata was
updated to reflect that now, instead of erroring it out from the
common code in virDomainDiskDefValidate(), we're failing earlier
with a different error message.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In fee8a61d29 a new attribute to <memballoon/> was introduced:
free-page-reporting. We don't really like hyphens in attribute
names. Use camelCase instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The output virtio-options-memballoon-freepage-reporting.xml of
xml2xmlout is the same as the input. Make it as symlink to save
space.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Always reverse-engineering VMX files, attempt to support SATA disks in
guests, and their controllers.
The esx-in-the-wild-10 test case is taken from RHBZ#1883588, while the
result of esx-in-the-wild-8 is updated with SATA disks.
Fixes (hopefully):
https://bugzilla.redhat.com/show_bug.cgi?id=1677608https://bugzilla.redhat.com/show_bug.cgi?id=1883588
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This provides basic testing for the free-page-reporting feature that is
introduced in qemu 5.1.
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch will introduce the free-page-reporting feature capabilities
that are in qemu 5.1
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, pfifo_fast queueing discipline (qdisc) is set on
newly created interfaces (including TAPs). This qdisc has three
queues and packets that want to be sent through given NIC are
placed into one of the queues based on TOS field. Queues are then
emptied based on their priority allowing interactive sessions
stay interactive whilst something else is downloading a large
file.
Obviously, this means that kernel has to be involved and some
locking has to happen (when placing packets into queues). If
virtualization is taken into account then the above algorithm
happens twice - once in the guest and the second time in the
host.
This is arguably not optimal as it burns host CPU cycles
needlessly. Guest already made it choice and sent packets in the
order it wants.
To resolve this, Linux kernel offers 'noqueue' qdisc which can be
applied on virtual interfaces and in fact for 'lo' it is by
default:
lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
Set it for other TAP devices we create for domains too. With this
change I was able to squeeze 1Mbps more from a macvtap attached
to a guest and to my 1Gbps LAN (as measured by iperf3).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329644
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
For the virtio-9p bhyve command line argument, the proper order
is mount_tag=/path/to/host/dir, not the opposite.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Recently virtio-9p support was added to bhyve.
On the host side it looks this way:
bhyve .... -s 25:0,virtio-9p,sharename=/path/to/shared/dir
It could also have ",ro" suffix to make share read-only.
In the Linux guest, this share is mounted with:
mount -t 9p sharename /mnt/sharename
In the guest user will see the same permissions and ownership
information for this directory as on the host. No uid/gid remapping is
supported, so those could resolve to wrong user or group names.
The same applies to the other side: chowning/chmodding in the guest will
set specified ownership and permissions on the host.
In libvirt domain XML it's modeled using the 'filesystem' element:
<filesystem type='mount'>
<source dir='/path/to/shared/dir'/>
<target dir='sharename'/>
</filesystem>
Optional 'readonly' sub-element enables read-only mode.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
As preparation for g_autoptr() we need to change the function to take
only virCgroupPtr.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
"cpu_map.xml" was moved to a directory "cpu_map" and split up into
several files.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
There are no more users of VIR_ALLOC or VIR_ALLOC_N.
Delete their test cases.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
commandhelper hangs indefinitely in poll() on macOS on commandtest test2
and later because POLLNVAL is returned on revents for input file
descriptor opened from /dev/null, i.e this hangs:
$ tests/commandhelper < /dev/null
BEGIN STDOUT
BEGIN STDERR
^C
But it works fine with regular stdin:
$ tests/commandhelper <<< test
BEGIN STDOUT
BEGIN STDERR
test
test
END STDOUT
END STDERR
The issue is mentioned in poll(2):
BUGS
The poll() system call currently does not support devices.
With the change all 28 cases in commandtest pass.
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
In 88957116c9 I've switched to -machine memory-backend=ID and
-object memory-backend-* because QEMU is obsoleting -mem-path
and -mem-prealloc. However, what I did not foresee was that using
-machine memory-backend in combination with -numa is not allowed
in QEMU. This was reported upstream and fortunately not released
yet.
The problem is that if domain has NUMA nodes then we will
generate memory-backend-* objects for NUMA nodes (because if QEMU
is new enough to expose default RAM ID it also supports -numa
memdev=) and adding non-NUMA memory backend is wrong.
Reported-by: Masayoshi Mizuma <msys.mizuma@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The feature is filtered by KVM and never automatically enabled. So even
though QEMU definition of EPYC-Rome contains this feature, the guest
won't see it. Also domain capabilities will show it as disabled for KVM
domains. Thus the feature should not really be included in our
definition of EPYC-Rome.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The CPU should be identified as EPYC-Rome, but the QEMU binary used to
gather the original test data did not support this model. Let's update
the supported models to QEMU 5.1.0.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The files contained the "-invalid" marker in their filename, marking
them as test cases that are supposed to fail in the virschematest.
Unfortunately, the "-invalid" marker does not discriminate between
different tests the files might be used in.
A later patch will introduce a new test validating the XML. This
test is not supposed to fail, as the files contain valid XML.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This adds a new value to virConnectCompareCPUFlags,
"VIR_CONNECT_CPU_VALIDATE_XML", that governs XML document validation in
virCPUDefParseXML.
In src/conf/cpu_conf.c, include configmake.h for PKGDATADIR and
virfile.h for virFileFindResource.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is present no XML test coverage for this.
Add genericxml parse + formatting coverage.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The 'checkBitmap' helper uses 'virBitmapFormat' internally and also
reports better errors. Use it instead of the open-coded checks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The function will also be reusable in other places of the code by making
the size check optional. For now only test12* is refactored since it
used TEST_MAP directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test validates two outputs. Don't reuse 'str' for both.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'test4' was testing three distinct operations on separate instances of a
bitmap. Split it up into 'test4a', 'test4b' and 'test4c' so that the
'bitmap' variable is not reused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'test12' was testing two distinct operations on two instances of a
bitmap. Split it up into 'test12a' and 'test12b' so that the 'bitmap'
variable is not reused.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Test an empty bitmap including it's extension via the self-expanding
APIs and and a "0" and "" strings when converting the string back and
forth.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move scope of variables and get rid of the 'cleanup' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
There's only one combination used so we can remove the rest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In our wrapper of g_dbus_connection_call_sync() in
virfirewalltest a string is duplicated and added onto a
virStringList. This leads to a memory leak because
virStringListAdd() duplicates the string itself.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
With us switching to glib more and more it is easy to get things
wrong (as can be seen in the previous commit). Set G_DEBUG
variable to "fatal-warnings" which causes GLib to abort the
program at the first call to g_warning() or g_critical().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
GLib implementation of g_dbus_connection_call_sync() calls
g_variant_ref_sink() on the passed @parameters to make sure they have
proper reference. If the original reference is floating the
g_dbus_connection_call_sync() consumes it, but if it's normal reference
it will just add another one.
Our mock functions were only freeing the @parameters which is incorrect
and doesn't reflect how the real implementation works.
Reported-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
I've found two files under qemuxml2xmloutdata/ that are the same
as in qemuxml2argvdata/. Replace them with symlinks.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
So far, Libvirt configures memory-backend-* for memory hotplug,
possibly NUMA nodes and in a few other cases. This patch
switches to constructing the memory-backend-* command line for
all cases. To keep ability to migrate guests a little hack is
used: the ID of the object is set to the one that QEMU uses
internally anyways. These IDs are stable (first started to appear
somewhere around v0.13.0-rc0~96) and can't change.
In fact, this patch does exactly what QEMU does internally. The
reason for moving the logic into Libvirt is that QEMU wants to
deprecate the old style of specifying memory.
So far, only x84_64 test cases are changed, because tests for
other architectures use older capabilities, which still lack the
QEMU_CAPS_MACHINE_MEMORY_BACKEND capability and they don't report
the RAM ID.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1836043
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The machine structure has another (optional) attribute:
default-ram-id, which specifies the alias of the default RAM
object. While the alias is private, it can never change in order
to not break migration. QEMU uses the alias when allocating
regular, not NUMA memory. In order to switch to new command line
and maintain migration, save this ID.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
All three memory backends (-file, -ram and -memfd) have .prealloc
attribute. Since we are setting it only for -file, the
corresponding code lives only under if() that handles that
specific backend. But in near future we will want to set the
attribute for other backends too. Therefore, move the
corresponding code outside of the if().
This causes some .argv files to be changed, but the only change
happening there is move of the attribute (best viewed with:
'git show --color-words=.').
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This capability tracks whether "usb-host" device has "hostdevice"
attribute. This attribute allows us to specify full path to the
USB device ("/dev/bus/usb/$bus/$dev") but more importantly, since
QEMU uses qemu_open() for this attribute it allows us to pass
pre-opened FD and have QEMU not bother with opening the file at
all.
The attribute was added in v5.1.0-rc0~71^2~1 QEMU commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Mid-cycle caps resync. Notable change is that virtio-blk enables
multiqueue by default and the addition of
'calc-dirty-rate'/'query-dirty-rate' QMP commands.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We didn't actually use this file. Change the disk type to 'file' so that
it works in qemu and add pre and post-blockdev invocations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Ján Tomko <jtomko@redhat.com>
'virTestCompareToFile' automatically fixes newline if it is not present
in the input string but is present in the file. In this case we need to
append the erorr messages with a newline so that
VIR_TEST_REGENERATE_OUTPUT produces files which will pass syntax-check.
Fixes: 9ec77eef2d
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit f253dc90f5 introduced a test regression in environments with
Xen < 4.10. The logic in libxl_conf.c correctly maps ACPI and APIC
from virDomainObj to libxl_domain_conf based on
LIBXL_HAVE_BUILDINFO_APIC, but the tests did not account for the
different libxl_domain_conf JSON representations.
One approach to fixing the test regression is to duplicate JSON test
data files, having one set for Xen <= 4.9 and another for Xen 4.10
and greater. To avoid duplicate data files, this patch takes the
approach of modifying the libxl_domain_conf object based on
LIBXL_HAVE_BUILDINFO_APIC, before retrieving the JSON representation.
It allows using the same test data files for all supported versions
of Xen by adjusting the intermediate form of libxl_domain_conf object
as needed.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add minimal coverage for non-x86_64 timer validation
from commit 2f5d8ffebe
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When an error is expected, the error message will be checked.
This is expressed by creating an additional ".err" file containing
the expected error message.
It is added in order to make sure the expected errors
are not masked by other errors during test execution while
leveraging the existing framework.
In order to keep it simple, an input file cannot be reused
anymore to cover several expected error cases configured
in the test code. An input file can still be reused by creating
a test case specific symlink.
For consistency, the mock needs to report an error now, too,
as every failure must have an error; otherwise a test case will
fail.
Require LC_ALL=C explicitly to make sure error messages are not
localized for testing.
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Suggested-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The code path is invoked by one of the test cases. Upcoming testing of
error messages would fail.
Signed-off-by: Sebastian Mitterle <smitterl@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Add an abort() on the class/object allocation failures so that
virStorageSourceNew() always returns a virStorageSource and remove
checks from all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The alignment for the pSeries NVDIMM does not depend on runtime
constraints. This means that it can be done in device parse
time, instead of runtime, allowing the domain XML to reflect
what the auto-alignment would do when the domain starts.
This brings consistency between the NVDIMM size reported by the
domain XML and what the guest sees, without impacting existing
guests that are using an unaligned size - they'll work as usual,
but the domain XML will be updated with the actual size of the
NVDIMM.
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We set WITH_LIBATTR in meson.build, not WITH_ATTR.
Also link securityselinuxlabeltest with test_qemu_driver_lib.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 3ace72965c
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Various places reported by cppcheck's invalidPrintfArgType_sint
and invalidPrintfArgType_uint.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Sometimes parallel compilation randomly fails on platforms
that do not have many drivers enabled, like macOS:
In file included from ../tests/esxutilstest.c:13:
../src/esx/esx_vi_types.h:62:10: fatal error: 'esx_vi_types.generated.typedef' file not found
#include "esx_vi_types.generated.typedef"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
List esx_gen_headers as a source to stop meson from building
it before the headers are generated.
https://gitlab.com/libvirt/libvirt/-/jobs/726039284
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Right now, the logic that takes care of deciding whether expensive
tests should be run or not is not working correctly: more
specifically, it's not possible to use something like
$ VIR_TEST_EXPENSIVE=1 ninja test
to override the default choice, because in meson.build we always
pass an explicit value that overrides whatever is present in the
environment.
We could implement logic to make this work properly, but that
would require some refactoring of our test infrastructure and is
arguably of little value given that running
$ meson build -Dexpensive_tests=enabled
is very fast, so let's just stop telling users about the variable
instead and call it a day.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Support setting a password for the VNC framebuffer using the passwd
attribute on the <graphics/> element, if the driver has the
BHYVE_CAP_VNC_PASSWORD capability.
Note that virsh domxml-from-native does not output the password in the
generated XML, as VIR_DOMAIN_DEF_FORMAT_SECURE is not set when
formatting the domain definition.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The resolution of the VNC framebuffer can now be set via the resolution
definition introduced in 5.9.0.
Also, add "gop" to the list of model types the <resolution/>
sub-element is valid for.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add a new helper function, bhyveParsePCIFbuf, to parse the bhyve-argv
parameters for a frame-buffer device to <graphics/> and <video/>
definitions.
For now, only the listen address, port, and vga mode are detected.
Unsupported parameters are silently skipped.
This involves upgrading the private API to expose the
virDomainGraphicsDefNew helper function, which is used by
bhyveParsePCIFbuf.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In [1], changes were made to remove the existing auto-alignment
for pSeries NVDIMM devices. That design promotes strange situations
where the NVDIMM size reported in the domain XML is different
from what QEMU is actually using. We removed the auto-alignment
and relied on standard size validation.
However, this goes against Libvirt design philosophy of not
tampering with existing guest behavior, as pointed out by Daniel
in [2]. Since we can't know for sure whether there are guests that
are relying on the auto-alignment feature to work, the changes
made in [1] are a direct violation of this rule.
This patch reverts [1] entirely, re-enabling auto-alignment for
pSeries NVDIMM as it was before. Changes will be made to ease
the limitations of this design without hurting existing
guests.
This reverts the following commits:
- commit 2d93cbdea9
Revert "formatdomain.html.in: mention pSeries NVDIMM 'align down' mechanic"
- commit 0ee56369c8
qemu_domain.c: change qemuDomainMemoryDeviceAlignSize() return type
- commit 07de813924
qemu_domain.c: do not auto-align ppc64 NVDIMMs
- commit 0ccceaa57c
qemu_validate.c: add pSeries NVDIMM size alignment validation
- commit 4fa2202d88
qemu_domain.c: make qemuDomainGetMemorySizeAlignment() public
[1] https://www.redhat.com/archives/libvir-list/2020-July/msg02010.html
[2] https://www.redhat.com/archives/libvir-list/2020-September/msg00572.html
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Closed file handles need to be initialized to -1, not 0. This caused a
inappropriate double close of stdin, which is not desirable, although
it had no ill effects.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is currently a hang in test27 that exhibits itself on FreeBSD 11.4
only. The behaviour is that virCommandProcessIO gets POLLIN on the
FD for stdout, but read() blocks. Meanwhile commandtest also blocks
in write for stderr because the pipe buffers are full.
This fix in commandhelper likely does not really address the root cause
just hides it due to the buffering done by FILE *. Mixing UNIX FD I/O
and FILE * I/O is bad practice regardless.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, slot 1 is only allowed to be used by the LPC device.
Relax this requirement and allow to use slot 1 if it was explicitly
specified by the user for any other device type. In this case the LPC
device will have the next available address.
If slot 1 was not used by the user, it'll be reserved for the LPC
device, even if it is not configured to make address assignment
consistent in case the LPC device becomes necessary (e.g. the user
adds a console or a video device which require LPC).
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Support modeling of the 'isa' controller for bhyve. User can manually
define any PCI slot for the 'isa' controller, including PCI slot 1,
but other devices are not allowed to use this address.
When domain configuration requires the 'isa' controller to be present,
automatically add it on domain post-parse stage.
Now, as this controller is always available when needed, it's not
necessary to implicitly add it to the bhyve command line, so remove
bhyveBuildLPCArgStr().
Also, make bhyveDomainDefNeedsISAController() static as it's no longer
used outside of bhyve_domain.c.
As more than one ISA controller is not supported by bhyve,
and multiple controllers with the same index are forbidden,
so forbid ISA controllers with non-zero index for bhyve.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The storage driver was wired up to support creating raw volumes in LUKS
format, but was never adapted to support LUKS-in-qcow2. This is trivial
as it merely requires the encryption properties to be prefixed with
the "encrypt." prefix, and "encrypt.format=luks" when creating the
volume.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The two removed files have exactly the same config as other LUKS volume
data files, simply with different file names. Consolidate down to just
two LUKS volume data files as that's all that we need for the test
coverage.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
b_info->u.hvm.{acpi,apic} are deprecated. But also, on recent libxl
version (4.14) the old one seems to be broken. While libxl part should
be fixed too, update the usage here and at some point drop support for
the old version.
b_info->acpi was added in Xen 4.8
b_info->apic was added in Xen 4.10
Xen 4.10 is the oldest version that still has security support (until
December 2020).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Rewrite to use GLib DBus instead of libdbus will introduce function with
large number of arguments that we will have to mock for our tests so we
need to extend the number of arguments for our macros.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This test calls into src/util/virfirewalld.c where it uses DBus to
figure out if firewalld is registered. Without the mock it luckily
fails and the test works correctly.
To isolate the tests from host environment we should mock the DBus
calls.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'readonly' hostdev property is stored separately from the
virStorageSource as some hostdevs are not described by a virStorage
source. We need to propagate the flag to the virStorage source also for
iSCSI backends as it's used to generate the backend properties.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1868856
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Modify the test case to enable TLS and add private data containing
aliases of objects corresponding to a TLS setup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>