When guest has NUMA nodes and QEMU is new enough to report
default RAM ID then ideally we would use -numa memdev= combined
with memory-backend-* combo becasue -mem-path/-mem-prealloc/-numa
mem are deprecated. Well, there is one problem - the .memdev=
attribute is machine type dependent (just look at arguments of
virQEMUCapsGetMachineNumaMemSupported()) and to ensure backwards
compatibility we prefer -numa mem= over -numa memdev=.
But there was one corner case when -mem-prealloc was requested
but not generated on the cmd line. It all starts with
qemuBuildMemCommandLine() which generates just '-m XXX' and
because it sees defaultRAMid and guest NUMA nodes greater than
zero it does nothing more.
Then, qemuBuildNumaCommandLine() sees that -numa mem= is still
supported for given machine type and nothing else set
@needBackend thus qemuBuildMemPathStr() is called which output
-mem-prealloc only in a few cases assuming it was outputted
earlier.
Reported-by: Jing Qi <jinqi@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This test shows a bug we have: even though the XML says:
<allocation mode='immediate'/>
there is no -mem-prealloc nor .prealloc=yes anywhere on the cmd
line. This will be fixed in the next commit.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a test case where 'ramfb' is explicitly disabled for a mediated
device to prevent regressing again.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The test filled the chardev type to VIR_DOMAIN_CHR_TYPE_FILE and thus
set the 'data.emulator.source->data.file.path' pointer, but the
commandline formatter is unconditionally expecting VIR_DOMAIN_CHR_TYPE_UNIX
and thus reading 'data.emulator.source->data.nix.path'. Since it's an
union it happened to land in the correct place. Fix the faked data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'virDomainChrSourceDef' contains private data so 'virDomainChrSourceDefNew'
must be used to allocate it. 'virDomainTPMDef' was using it directly
which won't work with the chardev helper functions.
Convert it to a pointer to properly allocate private data.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit 65b0b746b5 changed spice tests to use latest caps. Before this
change, "FLAG_REAL_CAPS" wasn't being set in testQemuInfoInitArgs(). The
absence of this flag triggered the code path inside
testCompareXMLToArgv() that executed testUpdateQEMUCaps(). This function
will update the host CPU via virQEMUCapsUpdateHostCPUModel() into
virQEMUCapsInitHostCPUModel(). In this function,
virQEMUCapsInitCPUModel() would end up updating the hostCPU inside the
qemuCaps (via virQEMUCapsProbeHostCPU()). Before the forementioned
commit, the host CPU was being defaulted to x86_64, vendor Intel, for
the 'graphics-spice-timeout' test that is using the 'pc' machine type
and 'accel=kvm'.
Today, "FLAG_REAL_CAPS" is being set because we're using the latest caps
from x86_64. This means that the whole code path mentioned above is
skipped. qemuCaps are now being loaded via virQEMUCapsLoadCache()
directly. Without the handling being done by testUpdateQEMUCaps(), the
host CPU is being retrieved later on, down below
qemuProcessCreatePretendCmdPrepare() into qemuProcessUpdateGuestCPU().
The latter will attempt to update the domain cpu and executing a
virCPUCompare with the hostCPU and def->cpu.
All this logic ended up causing a failure of the
'graphics-spice-timeout' test in ppc64 and s390x hosts. This test is
being run with KVM acceleration, and the KVM driver for ppc64 and s390x
will return a default x86_64 CPU with vendor "AMD", making
virCPUCompare() fail with the following message:
"QEMU XML-2-ARGV graphics-spice-timeout.x86_64-latest ... libvirt: CPU
Driver error : the CPU is incompatible with host CPU: host CPU vendor does
not match required CPU vendor Intel"
Fix this test by setting cpu check='none' and avoid the virCPUCompare()
that causes the problem for ppc64 and s390x hosts.
Note that this is a build fix. A more adequate fix would be to mock the
getHost() interface of the cpuDriverX86 for non-x86 hosts, allowing
'fullCPU' to be retrieved in qemuProcessUpdateGuestCPU(), and a proper
x86 CPU to be retrieved in the scenario described above.
Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
'-audiodev' as a modern implementation based on QAPI already takes JSON
as the argument. Convert our code to use it directly.
The declaration of the QAPI types can be found in
'qemu.git/qapi/audio.json'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virJSONValueObjectAdd now works identically to virJSONValueObjectCreate
when used with a NULL argument. Replace all callers.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch updates domaincapsdata and qemucapabilitiesdata for ppc64
with qemu commit v6.1.0-1714-gc5b2f55981.
Changes in all 'ppc64-latest.ags' files were needed. The changes are
mundane despite the volume. For all 'ppc64-latest.args' files the
changes are:
- removing '-sandbox' command line;
- 'secret' and 'memory-backend-ram' objects are now using qom-type format;
- '-device' is now using qom-type format.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
To make it easier for users to figure out how the DN should be formatted.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This removes a dead link, the need for users to understand a glib function and a
improper reference to fnmatch (as we only expand asterisks to any string).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This commit doesn't aim to extinguish every VIR_FREE() call, but
only those which were touched by the previous commit. The aim is
to drop cleanup/error labels.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Instead of calling qemuMonitorTestFree() explicitly, we can use
g_autoptr() and let it be called automagically.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are two instances of an explicit call to
qemuMonitorCPUModelInfoFree() which in fact can be turned into
g_auto().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are a few cases where a string list is freed by an explicit
call of g_strfreev(), but the same result can be achieved by
g_atuo(GStrv).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
There are two functions (testQemuAgentOSInfo() and
testQemuAgentTimezone()) which call virTypedParamsFree() only in
successful paths. If an error is met then those parameters would
be leaked. Fix this by placing the virTypedParamsFree() calls on
better place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Commit 88957116c9 switched to use
memory-backend-* for regular VM memory as well. That change indirectly
started using 'host-nodes' for system memory which results in QEMU
calling mbind() to bind the system memory to specific NUMA node if the
VM XML contains the configuration similar to this:
...
<numatune>
<memory mode='strict' nodeset='0'/>
</numatune>
...
Once the VM was started with that configuration it was no longer
possible to change the memory NUMA nodeset.
Fixes: 677c90cc1d
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove unnecessary label and goto. This also fixes a bug where a
failure to create the table would result in the test passing.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Remove unnecessary label and goto. Cleanup line breaks.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Extend the TPM backend XML with a node 'active_pcr_banks' that allows a
user to specify the PCR banks to activate before starting a VM. Valid
choices for PCR banks are sha1, sha256, sha384 and sha512. When the XML
node is provided, the set of active PCR banks is 'enforced' by running
swtpm_setup before every start of the VM. The activation requires that
swtpm_setup v0.7 or later is installed and may not have any effect
otherwise.
<tpm model='tpm-tis'>
<backend type='emulator' version='2.0'>
<active_pcr_banks>
<sha256/>
<sha384/>
</active_pcr_banks>
</backend>
</tpm>
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2016599
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It is now unused.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
For later QEMUs than 2.11 we do FD passing for character devices,
so lock the capabilites to this exact version.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Move the test closer to other graphics-spice tests.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reduce the churn in following patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The formatter for the backup job data didn't pass the virDomainXMLOption
struct to the disk formatter which meant that the private data of the
disk source were not formatted.
This didn't pose a problem for now as the blockjob list remembered the
nodenames for the jobs, but the backup source lost them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For statically declared arrays one can use G_N_ELEMENTS() instead
of explicit sizeof(array) / sizeof(item). I've noticed couple of
places where the latter was used.
I am not fixing every occurrence because we have some places
which do not use glib (examples and NSS module).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
In testPCIVPDResourceCustomCompareIndex() there are two variables
declared at one line. They are both g_autoptr() decorated which
makes it worse, because coccinelle fails to parse that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
This warning is emitted for pretty much every test case,
making it hard to see what the actual error is.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The test case should return -1, not 0 in case a valid resource could
not be parsed successfully but the ret value is initialized to 0.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
While invalid values need to be ignored when presenting VPD data to the
user, it would be good to attempt to parse a valid portion of the VPD
instead of marking it invalid as a whole.
Based on a mailing list discussion, the set of accepted characters is
extended to the set of printable ASCII characters.
https://listman.redhat.com/archives/libvir-list/2021-October/msg01043.html
The particular example encountered on real hardware was multi-faceted:
* "N/A" strings present in read-only fields. This would not be a useful
valid value for a field (especially if a unique serial number is
expected), however, it was decided to delegate handling of those kinds
of values to higher-level software;
* "4W/1W PCIeG2x4" - looks like some vendors use even more printable
characters in the ASCII range than we currently allow. Since the
PCI/PCIe VPD specs mention alphanumeric characters without specifying
the full character set, it looks like this is ambiguous for vendors
and they tend to use printable ASCII characters;
* 0xFF bytes present in VPD-W field values. Those bytes do not map to
printable ASCII code points and were probably used by the vendor as
placeholders. Ignoring the whole VPD because of that would be too
strict.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
* RV and RW fields must be at the last position in their respective
section (per the conditions in the spec). Therefore, the parser now
stops iterating over fields as soon as it encounters one of those
fields and checks whether the end of the resource has been reached;
* The lack of the RW field is not treated as a parsing error since we
can still extract valid data even though this is a PCI/PCIe VPD spec
violation;
* Individual fields must have a valid length - the parser needs to check
for invalid length values that violate boundary conditions of the
resource.
* A zero-length field may be the last one in the resource, however, the
boundary check is currently too strict to allow that.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dmitrii Shcherbakov <dmitrii.shcherbakov@canonical.com>
There are a lot of places where we call virInterfaceDefFree()
explicitly. We can define autoptr cleanup macro and annotate
declarations with g_autoptr() and remove plenty of those explicit
free calls.
This also fixes a memory leak in udevInterfaceGetXMLDesc() which
called virInterfaceDefFree() only in successful path.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
Since b2757b697e
(qemu: support kvm-pv-ipi off), libvirt supports xml definition like:
<features>
<kvm>
<pv-ipi state='off'/>
</kvm>
</features>
Add test case for this feature.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
KVM features off test cases should be tested for a KVM domain, so
keep align kvm-features-off test with kvm-features except KVM
features on/off.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Starting from QEMU-6.2 enum members can be deprecated. Add support to
the validator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the function to the top of the file so other functions placed
towards the top will be able to reuse it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Switch to the new more featured way to report enum members which will
also allow us to detect use of deprecated members.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU-6.2 is reporting enum values in the new 'members' array which we'll
be switching to. Rewrite the logic so that adding the new checker is
more straightforward.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Update to v6.1.0-1735-gc52d69e7db which has Markus' patches for
improvements of enum probing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>